CKCoşku Kasnakoğlu

Coşku Kasnakoğlu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Coşku Kasnakoğlu has a total of 99 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    LQI-based control of grid-forming converters with a variable operating frequency droop mechanism: DMAT-based assessment

    by Alper Cakiroglu, Macit Tozak, Sezai Taskin, Ibrahim Sengor, Cosku Kasnakoglu

  • Open Access

    Robust Observer Design for the Longitudinal Dynamics of a Fixed-Wing Aircraft

    by Uygar Gunes, Artun Sel, Erdi Sayar, Cosku Kasnakoglu

    This paper presents a novel control-based observer (CbO) framework for robust state and disturbance estimation in the longitudinal dynamics of fixed-wing aircraft. In this approach, the observer design problem is recast as an equivalent control problem, enabling the use of advanced control techniques for observer synthesis. Within the proposed framework, the estimation of both system states and unknown disturbance inputs is achieved by integrating disturbance rejection capabilities into the control sub-block of the observer. This integration ensures that the output mismatch between the plant and observer model is minimized, even in the presence of modeling uncertainties and external disturbances. Two observer designs are developed: (i) an H∞-CbO, formulated as an H∞ control problem around a linearized model at a nominal operating point, and (ii) a robust H∞-CbO, which extends the design to account for significant model nonlinearities and variations by incorporating multiple operating points and optimizing for the worst-case estimation error. The longitudinal dynamics of a fixed-wing aircraft are derived and linearized to provide the basis for observer design. The performance of the proposed observers is evaluated through comprehensive simulation studies under three scenarios: operation at the nominal point, operation around neighboring points, and comparison with conventional linear observers. Simulation results demonstrate that the proposed observer offers superior robustness and accuracy in estimating both states and external disturbances, particularly in the presence of model uncertainties and varying flight conditions.

  • Masked Multiple State Space Model Identification Using FRD and Evolutionary Optimization

    by Mehmet Önder Efe, Burak Kürkçü, Coşku Kasnakoğlu, Zaharuddin Mohamed, Zhijie Liu

    Identification of dynamical systems from frequency response data (FRD) has extensively been studied and effective techniques have been developed. Given different FRD sets obtained from different systems and a fixed state space model structure, is it possible to find a constant parameter vector containing $(\mathbf {A},\mathbf {B},\mathbf {C},\mathbf {D})$ quadruple's numerical content and a FRD-associated mask vector set that approximates the spectral information available in each FRD set? This article proposes a genetic algorithm based optimization approach to determine the real parameter vector $(\mathbf {A},\mathbf {B},\mathbf {C},\mathbf {D})$ and the binary mask vector through a sequential optimization scheme. We study state space models for matching FRD from multiple systems. Results show that the proposed optimization approach solves the problem and compresses multiple dynamical models into a single masked one.


  • Switched Neural Networks for Simultaneous Learning of Multiple Functions

    by Mehmet Önder Efe, Burak Kürkçü, Coşku Kasnakoǧlu, Zaharuddin Mohamed, Zhijie Liu

    This paper introduces the notion of switched neural networks for learning multiple functions under different switching configurations. The neural network structure has adjustable parameters and for each function the state of the parameter vector is determined by a mask vector, 1/0 for active/inactive or +1/-1 for plain/inverted. The optimization problem is to schedule the switching strategy (mask vector) required for each function together with the best parameter vector (weights/biases) minimizing the loss function. This requires a procedure that optimizes a vector containing real and binary values simultaneously to discover commonalities among various functions. Our studies show that a small sized neural network structure with an appropriate switching regime is able to learn multiple functions successfully. During the tests focusing on classification, we considered 2-variable binary functions and all 16 combinations have been chosen as the functions. The regression tests consider four functions of two variables. Our studies showed that simple NN structures are capable of storing multiple information via appropriate switching.


  • Open Access

    Microstrip Patch Antenna Design at 10 GHz for X Band Applications

    by Mehmet Karahan, Mertcan Inal, Alperen Dilmen, Furkan Lacinkaya, Ahmet Nuri Akay, Cosku Kasnakoglu

    Microstrip patch antennas are used in satellite imaging systems, wireless communication equipment, military radios, GPS (Global Positioning System) and GSM (Global System for Mobile Communications) applications. Its advantages are its small size and light weight, thin structure, low power consumption, use in dual frequency applications, and patching in various geometric shapes. Developing technology has facilitated and accelerated the production of microstrip antennas. In this study, microstrip antenna design operating at 10 GHz frequency for X band applications has been made. X band is used for air traffic control, weather traffic control, vessel traffic control, defense tracking and vehicle speed detection, terrestrial communications and networking, space communications and amateur radio. HFSS program was used in antenna design. AWR program was used to find transmission line parameters. In addition, MATLAB program was used to calculate some parameters. First of all, information is given about the working principle of the antenna, the selected dielectric layer and the working frequency. Schematic drawings of the designed antenna were made from above and from the side. S11 reflection coefficient magnitude graphs are drawn below and above the operating frequency. The radiation pattern is drawn for the E-plane and H-plane at the operating frequency. 3-D (dimensional) plot of antenna gain at operating frequency is drawn. The simulations performed have shown that the designed antenna works successfully.


  • A Modified Levenberg Marquardt Algorithm for Simultaneous Learning of Multiple Datasets

    by Mehmet Önder Efe, Burak Kürkçü, Coşku Kasnakoğlu, Zaharuddin Mohamed, Zhijie Liu

    Levenberg-Marquardt (LM) algorithm is a powerful approach to optimize the parameters of a neural network (NN). Given a training dataset, the algorithm synthesizes the best path toward the optimum. This paper demonstrates the use of LM optimization algorithm when there are more than one dataset and on/off type switching of NN parameters is allowed. For each dataset a pre-selected set of parameters are allowed for modification and the proposed scheme reformulates the Jacobian under the switching mechanism. The results show that a NN can store information available in different datasets by a simple modification to the original LM algorithm, which is the novelty introduced in this study. The results are verified on a regression problem.


  • Open Access

    Fault Tolerant Super Twisting Sliding Mode Control of a Quadrotor UAV Using Control Allocation

    by Mehmet Karahan, Mertcan Inal, Cosku Kasnakoglu

    In this study, a fault-tolerant super-twisting sliding mode controller with a control allocation system for a quadrotor aircraft is proposed. Super twisting sliding mode control is a robust control technique that handles a system with a relative degree equal to one. A super-twisting sliding mode controller is proposed because of its robustness to uncertainties and perturbations. It increases accuracy and reduces chattering. A control allocation algorithm is developed to cope with the actuator fault. Firstly, a nonlinear model of the quadrotor unmanned aerial vehicle (UAV) is presented. Then, the controller design and type of the actuator fault are explained. The control allocation algorithm is used to optimize the trajectory tracking performance of the quadrotor in the presence of an actuator fault. A control allocation algorithm is an effective approach to implementing fault-tolerant control. When actuator faults are identified, they can be modeled as changes in the B matrix of constraints. Various simulations have been made for situations with and without actuator failure. In normal conditions, the quadrotor can accurately track altitude, roll, pitch and yaw references. In faulty conditions, the quadrotor can follow the references with a small error. Simulations prove the effectiveness of the control allocation algorithm, which stabilizes the quadrotor in case of an actuator fault. Overall, this paper presents a novel fault-tolerant controller design for quadrotor aircraft that effectively addresses actuator faults using a super-twisting sliding mode controller and control allocation algorithm.


  • Open Access

    SOS-Based Nonlinear Observer Design for Simultaneous State and Disturbance Estimation Designed for a PMSM Model

    by Artun Sel, Bilgehan Sel, Umit Coskun, Cosku Kasnakoglu

    In this study, a type of nonlinear observer design is studied for a class of nonlinear systems. For the construction of the nonlinear observer, SOS-based optimization tools are utilized, which for some nonlinear dynamical systems have the advantage of transforming the problem into a more tractable one. The general problem of nonlinear observer design is translated into an SOS polynomial optimization which can be turned into an SDP problem. For a study problem, simultaneous state and disturbance estimation is considered, a cascaded nonlinear observer using a certain parameterization is constructed, and computation techniques are discussed. Cascade nonlinear observer structure is a design strategy that decomposes the problem into its components resulting in dimension reduction. In this paper, SOS-based methods using the cascade design technique are represented, and a simultaneous state and disturbance signal online estimation algorithm is constructed. The method with its smaller components is given in detail, the efficacy of the method is demonstrated by means of numerical simulations performed in MATLAB, and the observer is designed using numerical optimization tools YALMIP, MOSEK, and PENLAB.