Ramon Murillo
Research Subjects
Research Interests
Ramon Murillo has a total of 179 co-authors. Here are the top co-authors by number of shared publications:
- María Soledad Callén
Instituto de Carboquímica (ICB-CSIC), Miguel Luesma Castán 4, 50018 Zaragoza, Spain
64 shared publications - María Victoria Navarro
Instituto de Carboquímica (ICB-CSIC), C/Miguel Luesma Castán, 50018 Zaragoza, Spain
48 shared publications - Jose Manuel López
Instituto de Carboquímica (ICB-CSIC), C/Miguel Luesma Castán, 50018 Zaragoza, Spain
39 shared publications - Tomás García
Instituto de Carboquímica (ICB-CSIC), Miguel Luesma Castán 4, 50018 Zaragoza, Spain
38 shared publications T. García
26 shared publications- Isabel Martinez
Instituto de Carboquímica, Consejo Superior de Investigaciones Científicas (CSIC), Miguel Luesma Castán 4, 50018 Zaragoza, Spain
24 shared publications
Latest Publications
- Open Access
- 25 September 2026
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (40) , 22228-22236
Reverse Water Gas Shift over CaO under Calcination Conditions: Interplay between H2O Inhibition, CO2 Equilibrium, and Surface Dynamics
The integration of CO2 capture and utilization is a promising strategy for carbon management. In CaO-based systems, CaO can act as a CO2 sorbent during carbonation and as reverse water–gas shift (RWGS) catalyst during regeneration. However, the interaction between CaCO3 decomposition and catalytic reactivity remains poorly understood. In this work, the RWGS activity of CaO was investigated under conditions relevant to desorption-enhanced reverse water–gas shift (DERWGS). Conventional power-law kinetics were unable to reproduce the experimental results, whereas the inclusion of an H2O inhibition term accurately described the observed behavior and yielded physically meaningful reaction orders. The kinetic analysis identified H2O inhibition as a key factor governing RWGS activity. Combined analysis of RWGS and calcination kinetics reveals that the overall process arises from the coupling between CO2 release during calcination and its catalytic conversion on CaO. Cycling experiments further show that catalyst deactivation follows the decay in CO2 carrying capacity, suggesting a common structural origin. These findings provide a kinetic framework for describing DERWGS as a dynamically evolving system governed by the interplay between solid-state transformation and catalytic surface processes.
- 25 September 2026
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (40) , 22228-22236
Open AccessReverse Water Gas Shift over CaO under Calcination Conditions: Interplay between H2O Inhibition, CO2 Equilibrium, and Surface Dynamics
The integration of CO2 capture and utilization is a promising strategy for carbon management. In CaO-based systems, CaO can act as a CO2 sorbent during carbonation and as reverse water–gas shift (RWGS) catalyst during regeneration. However, the interaction between CaCO3 decomposition and catalytic reactivity remains poorly understood. In this work, the RWGS activity of CaO was investigated under conditions relevant to desorption-enhanced reverse water–gas shift (DERWGS). Conventional power-law kinetics were unable to reproduce the experimental results, whereas the inclusion of an H2O inhibition term accurately described the observed behavior and yielded physically meaningful reaction orders. The kinetic analysis identified H2O inhibition as a key factor governing RWGS activity. Combined analysis of RWGS and calcination kinetics reveals that the overall process arises from the coupling between CO2 release during calcination and its catalytic conversion on CaO. Cycling experiments further show that catalyst deactivation follows the decay in CO2 carrying capacity, suggesting a common structural origin. These findings provide a kinetic framework for describing DERWGS as a dynamically evolving system governed by the interplay between solid-state transformation and catalytic surface processes.
- Open Access
- 21 July 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (30) , 45504-45514
Hydrogen-Assisted Calcination of CaCO3: Kinetics and Mechanistic Insights under Desorption-Enhanced Reverse Water Gas Shift Conditions
This study investigates the kinetics of CaCO3 calcination in H2 under conditions relevant to the desorption-enhanced reverse water–gas shift (DERWGS) process. Thermogravimetric experiments performed with natural limestone between 600 and 800 °C showed that H2 markedly accelerates calcination, enabling decomposition at temperatures about 150 °C lower than in conventional calcination environments. As a consequence, the CaO obtained under DERWGS conditions exhibited significantly improved cyclic performance, with nearly double the residual CO2 carrying capacity of sorbents calcined under standard Ca-looping conditions. For small particles, CaCO3 conversion followed a homogeneous pattern and was well described by an Avrami–Erofeev kinetic expression with n = 2. The derived kinetic model, which accounts for temperature, H2 partial pressure, and the thermodynamic driving force associated with the equilibrium CO2 partial pressure, accurately reproduced conversion curves obtained at different temperatures, calcination cycles, and gas compositions. The apparent activation energy was 184 ± 4 kJ mol–1, consistent with literature values for reductive calcination. CO2 was the only gas-phase species found to directly inhibit calcination, whereas CO and H2O had no measurable independent effect. These findings support a sequential calcination–RWGS mechanism and provide a kinetic basis for the design and scale-up of DERWGS systems for low-carbon lime production and CO2 utilization.
- 21 July 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (30) , 45504-45514
Open AccessHydrogen-Assisted Calcination of CaCO3: Kinetics and Mechanistic Insights under Desorption-Enhanced Reverse Water Gas Shift Conditions
This study investigates the kinetics of CaCO3 calcination in H2 under conditions relevant to the desorption-enhanced reverse water–gas shift (DERWGS) process. Thermogravimetric experiments performed with natural limestone between 600 and 800 °C showed that H2 markedly accelerates calcination, enabling decomposition at temperatures about 150 °C lower than in conventional calcination environments. As a consequence, the CaO obtained under DERWGS conditions exhibited significantly improved cyclic performance, with nearly double the residual CO2 carrying capacity of sorbents calcined under standard Ca-looping conditions. For small particles, CaCO3 conversion followed a homogeneous pattern and was well described by an Avrami–Erofeev kinetic expression with n = 2. The derived kinetic model, which accounts for temperature, H2 partial pressure, and the thermodynamic driving force associated with the equilibrium CO2 partial pressure, accurately reproduced conversion curves obtained at different temperatures, calcination cycles, and gas compositions. The apparent activation energy was 184 ± 4 kJ mol–1, consistent with literature values for reductive calcination. CO2 was the only gas-phase species found to directly inhibit calcination, whereas CO and H2O had no measurable independent effect. These findings support a sequential calcination–RWGS mechanism and provide a kinetic basis for the design and scale-up of DERWGS systems for low-carbon lime production and CO2 utilization.
- Open Access
- 24 February 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 220
Integrated sorption enhanced gasification and reforming for hydrogen-rich gas production from olive stones
- 24 February 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 220
Open AccessIntegrated sorption enhanced gasification and reforming for hydrogen-rich gas production from olive stones
- Open Access
- 3 December 2024
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 27 (3) , 670-683
Waste-based value-added feedstocks from tire pyrolysis oil distillation: defossilization of the petrochemical industry
Waste-based value-added feedstock.
- 3 December 2024
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 27 (3) , 670-683
Open AccessWaste-based value-added feedstocks from tire pyrolysis oil distillation: defossilization of the petrochemical industry
Waste-based value-added feedstock.
- 28 August 2024
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 38 (18) , 17834-17846
Different Feed Mixtures for the Sorption-Enhanced Methanation (SEM) Process on a Lab-Scale TRL-3 Fixed-Bed Reactor
- 28 August 2024
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 38 (18) , 17834-17846
Different Feed Mixtures for the Sorption-Enhanced Methanation (SEM) Process on a Lab-Scale TRL-3 Fixed-Bed Reactor
- Open Access
- 23 August 2024
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 38 (17) , 17087-17099
Pyrolysis of End-Of-Life Tires: Moving from a Pilot Prototype to a Semi-Industrial Plant Using Auger Technology
This work, carried out within the framework of the BlackCycle project, demonstrates the robustness of an auger reactor for the pyrolysis of end-of-life tires (ELTs) to be considered within the seventh level of technology readiness (TRL-7). For this purpose, the resulting pyrolysis products are compared with those obtained from a pilot scale facility ranging within the fifth technology readiness level (TRL-5). Using the same type of ELTs, tire trucks (TTs), operating conditions used at the TRL-5 plant are attempted to mimic those expected at a semi-industrial plant: tailored temperature profile (450, 550, and 775 °C) and residence time for vapors (30 s) and solids (15 min). The feed mass rate is 4 and 400 kg/h for the pilot and semi-industrial plants, respectively. The yields of tire pyrolysis oil (TPO), tire pyrolysis gas (TPG), and raw recovered carbon black (RRCB) from both plants, as well as their key properties and characteristics, are in good agreement with each other. The TPO produced by both plants contains comparable concentrations of value-added chemicals such as benzene, toluene, xylene, ethylbenzene, and limonene. There is also a very similar pattern between the simulated distillation curves. The TPG obtained from both plants is also very rich in H2 and CH4 and has a lower calorific value of 52-54 MJ/Nm3 (N2 free basis). Although the RRCBs produced by the two plants are more demanding and require more labor, they do have a number of comparable characteristics. All this information demonstrates not only the reliability of the experimental campaigns to scale up the pyrolysis process but also the robustness of the semi-industrial scale plant based on the auger technology to be classified at TRL-7.
- 23 August 2024
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 38 (17) , 17087-17099
Open AccessPyrolysis of End-Of-Life Tires: Moving from a Pilot Prototype to a Semi-Industrial Plant Using Auger Technology
This work, carried out within the framework of the BlackCycle project, demonstrates the robustness of an auger reactor for the pyrolysis of end-of-life tires (ELTs) to be considered within the seventh level of technology readiness (TRL-7). For this purpose, the resulting pyrolysis products are compared with those obtained from a pilot scale facility ranging within the fifth technology readiness level (TRL-5). Using the same type of ELTs, tire trucks (TTs), operating conditions used at the TRL-5 plant are attempted to mimic those expected at a semi-industrial plant: tailored temperature profile (450, 550, and 775 °C) and residence time for vapors (30 s) and solids (15 min). The feed mass rate is 4 and 400 kg/h for the pilot and semi-industrial plants, respectively. The yields of tire pyrolysis oil (TPO), tire pyrolysis gas (TPG), and raw recovered carbon black (RRCB) from both plants, as well as their key properties and characteristics, are in good agreement with each other. The TPO produced by both plants contains comparable concentrations of value-added chemicals such as benzene, toluene, xylene, ethylbenzene, and limonene. There is also a very similar pattern between the simulated distillation curves. The TPG obtained from both plants is also very rich in H2 and CH4 and has a lower calorific value of 52-54 MJ/Nm3 (N2 free basis). Although the RRCBs produced by the two plants are more demanding and require more labor, they do have a number of comparable characteristics. All this information demonstrates not only the reliability of the experimental campaigns to scale up the pyrolysis process but also the robustness of the semi-industrial scale plant based on the auger technology to be classified at TRL-7.
- Open Access
- 1 January 2024
- Published by Elsevier in SSRN Electronic Journal
Scaling Up of a Sorption-Enhanced Methanation Process
The objective of this work is to demonstrate a sorption-enhanced methanation (SEM) process at a lab-scale TRL-3 fixed bed reactor for producing high purity synthetic natural gas (SNG). This process is based on the removal of the H2O formed through the methanation reactions of CO and CO2 by means of an adsorbent and so enhance the equilibrium reactions towards the formation of CH4. The functional materials selected in this study have been a zeolite 4A and a commercial Nickel-based catalyst. Different operational variables (temperature and pressure) were assessed to maximize the performance of both functional materials during SEM stage. Moreover, regeneration conditions were also optimized to be able to keep an adequate adsorption capacity of the zeolite along the cycles. Based on the results obtained, SEM performance was successfully demonstrated by operating the SNG production stage at 10 bar and 250 ºC and regenerating the zeolite through a pressure swing operation at 1 bar. These operating conditions were validated over more than 20 SEM/regeneration cycles using a feed gas containing H2/CO/CO2, achieving a stable performance throughout the cycles and 100 % CH4 purity during the SEM stage. Finally, the number of reactors needed for producing a continuous flow of SNG was estimated, resulting in a productivity of 8.00×10-4 molCH4/kgcat·s
- 1 January 2024
- Published by Elsevier in SSRN Electronic Journal
Open AccessScaling Up of a Sorption-Enhanced Methanation Process
The objective of this work is to demonstrate a sorption-enhanced methanation (SEM) process at a lab-scale TRL-3 fixed bed reactor for producing high purity synthetic natural gas (SNG). This process is based on the removal of the H2O formed through the methanation reactions of CO and CO2 by means of an adsorbent and so enhance the equilibrium reactions towards the formation of CH4. The functional materials selected in this study have been a zeolite 4A and a commercial Nickel-based catalyst. Different operational variables (temperature and pressure) were assessed to maximize the performance of both functional materials during SEM stage. Moreover, regeneration conditions were also optimized to be able to keep an adequate adsorption capacity of the zeolite along the cycles. Based on the results obtained, SEM performance was successfully demonstrated by operating the SNG production stage at 10 bar and 250 ºC and regenerating the zeolite through a pressure swing operation at 1 bar. These operating conditions were validated over more than 20 SEM/regeneration cycles using a feed gas containing H2/CO/CO2, achieving a stable performance throughout the cycles and 100 % CH4 purity during the SEM stage. Finally, the number of reactors needed for producing a continuous flow of SNG was estimated, resulting in a productivity of 8.00×10-4 molCH4/kgcat·s
- Open Access
- 26 November 2023
- Published by Elsevier in Biomass and Bioenergy
- Vol. 180
Gasification kinetics of chars from diverse residues under suitable conditions for the Sorption Enhanced Gasification process
- 26 November 2023
- Published by Elsevier in Biomass and Bioenergy
- Vol. 180
Open AccessGasification kinetics of chars from diverse residues under suitable conditions for the Sorption Enhanced Gasification process