Kristina G. Dunkel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Kristina G. Dunkel has a total of 80 co-authors. Here are the top co-authors by number of shared publications:
- Bjørn Jamtveit
University of Oslo
9 shared publications - Luca Menegon
Njord Centre Department of Geosciences University of Oslo Oslo Norway
6 shared publications Håkon Austrheim
Physics of Geological Processes (PGP), The Njord Centre, Department of Geosciences University of Oslo Oslo Norway
5 shared publications- Benoit Ildefonse
Géosciences Montpellier, Université de Montpellier, CNRS, Montpellier, France
4 shared publications Bjørn Jamtveit
4 shared publications- François Renard
The Njord Centre, Departments of Geosciences and Physics, University of Oslo, Oslo, Norway
3 shared publications
Latest Publications
- Open Access
- 24 April 2026
- Published by Springer Nature in Contributions to Mineralogy and Petrology
- Vol. 181 (5)
Zoned feldspar records hydration-dehydration cycles in lower-crustal shear zones
Metamorphic reactions provide crucial insights into the conditions that rocks experienced and significantly influence their rheological behaviour. However, some reactions are challenging to identify in the rock record. This study focuses on zonation and microstructures in plagioclase as indicators of metamorphic history, employing a case study from Lofoten, northern Norway, where various types of plagioclase microstructures are preserved together. We use a combination of electron microscopy techniques (electron backscatter diffraction, transmission electron microscopy, and electron microprobe analyses) complemented with local equilibrium thermodynamic modelling to examine the relationships between composition, microstructures, and underlying metamorphic processes, and put that in context with previous observations of metamorphically zoned plagioclase, often referred to as “complex feldspar”. Needle-shaped Ca-richer zones in plagioclase represent pseudomorphs after zoisite/clinozoisite, indicative of plagioclase breakdown following fluid infiltration at high pressure and subsequent reversal of the reaction. Polygonal plagioclase with complex zonations also originates from the hydration/dehydration cycle but has additionally undergone deformation during hydration. Minor changes in pressure and temperature at upper amphibolite-facies conditions can significantly affect the stability and microstructures of plagioclase and thereby the rheological behaviour of the lower crust.
- 24 April 2026
- Published by Springer Nature in Contributions to Mineralogy and Petrology
- Vol. 181 (5)
Open AccessZoned feldspar records hydration-dehydration cycles in lower-crustal shear zones
Metamorphic reactions provide crucial insights into the conditions that rocks experienced and significantly influence their rheological behaviour. However, some reactions are challenging to identify in the rock record. This study focuses on zonation and microstructures in plagioclase as indicators of metamorphic history, employing a case study from Lofoten, northern Norway, where various types of plagioclase microstructures are preserved together. We use a combination of electron microscopy techniques (electron backscatter diffraction, transmission electron microscopy, and electron microprobe analyses) complemented with local equilibrium thermodynamic modelling to examine the relationships between composition, microstructures, and underlying metamorphic processes, and put that in context with previous observations of metamorphically zoned plagioclase, often referred to as “complex feldspar”. Needle-shaped Ca-richer zones in plagioclase represent pseudomorphs after zoisite/clinozoisite, indicative of plagioclase breakdown following fluid infiltration at high pressure and subsequent reversal of the reaction. Polygonal plagioclase with complex zonations also originates from the hydration/dehydration cycle but has additionally undergone deformation during hydration. Minor changes in pressure and temperature at upper amphibolite-facies conditions can significantly affect the stability and microstructures of plagioclase and thereby the rheological behaviour of the lower crust.
- Open Access
- 13 March 2026
- Published by Copernicus GmbH
In-situ, real-time replacement of calcite under geometrical confinement.
Mineral replacement by dissolution-precipitation reactions that occur under confinement critically influences subsurface deformation by modifying rock porosity, permeability, and cohesion, and by inducing fracturing. Yet real-time, experimental observations of these phenomena at the nano- to microscale remain insufficient. In this work, we follow the in-situ replacement of confined calcite crystal using a surface force apparatus (SFA) technique. Calcite undergoes dissolution under low pH conditions, followed by replacement into three various Ca-minerals: calcium oxalate, calcium sulfate (gypsum), or calcium phosphate (brushite), depending on the initial composition of the solution. We monitor these reactions in real time, map the spatial distribution of precipitates as a function of confinement gap size, and evaluate how epitaxy between the secondary phases and the parent calcite governs preferred nucleation and growth sites. In addition, we measure forces that act on the confining pore wall during the replacement and estimate the associated crystallization pressures. This work contributes to the understanding of the mineral growth under confinement and its consequences for porous rock integrity, with immediate relevance to subsurface fluid and gas storage operations, where rapid mineralization is common.
- 13 March 2026
- Published by Copernicus GmbH
Open AccessIn-situ, real-time replacement of calcite under geometrical confinement.
Mineral replacement by dissolution-precipitation reactions that occur under confinement critically influences subsurface deformation by modifying rock porosity, permeability, and cohesion, and by inducing fracturing. Yet real-time, experimental observations of these phenomena at the nano- to microscale remain insufficient. In this work, we follow the in-situ replacement of confined calcite crystal using a surface force apparatus (SFA) technique. Calcite undergoes dissolution under low pH conditions, followed by replacement into three various Ca-minerals: calcium oxalate, calcium sulfate (gypsum), or calcium phosphate (brushite), depending on the initial composition of the solution. We monitor these reactions in real time, map the spatial distribution of precipitates as a function of confinement gap size, and evaluate how epitaxy between the secondary phases and the parent calcite governs preferred nucleation and growth sites. In addition, we measure forces that act on the confining pore wall during the replacement and estimate the associated crystallization pressures. This work contributes to the understanding of the mineral growth under confinement and its consequences for porous rock integrity, with immediate relevance to subsurface fluid and gas storage operations, where rapid mineralization is common.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Porosity structures and local compositional variations associated with natural CO2 sequestration in basalts offshore Norway
Permanent storage of CO2 as carbonates in basalt deposits utilises natural weathering reactions between silicate minerals and carbonic water. By studying how CO2-enriched water has altered basalt in 43 samples from the Vøring Margin, offshore Norway, we demonstrate the pathways and reactions of CO2 within a basalt reservoir.The pore spaces occupied by carbonates in the samples were studied through μ-CT (computer tomography) studies on three minicores and detailed microanalyses on 32 thin sections via scanning electron microscopy (SEM), electron microprobe analysis, and electron backscatter diffraction (EBSD). Single crystal X-ray diffraction on 15 samples determined the type of carbonate minerals and precipitation ages were determined for two samples through U/Pb-radiomeric dating. δ18O and δ13C-isotope analyses were used to determine the fluid origin in 11 samples.Three types of carbonate precipitation were characterised based on the pore structures they fill and the associated mineralogy. Type I carbonates, seen in 18 thin sections, fills vesicles, mainly along lava flow margins. SEM analyses showed that all vesicles are initially coated with a smectite layer which incorporates most of the Mg2+ and Fe2+ from dissolving silicate minerals. As pH and Ca concentrations increase, calcite precipitates in some vesicles. The secondary mineral assemblage and precipitation order fit with low-temperature alteration of basalt with pore water and atmospherically balanced CO2 levels (pH≥8). Type II carbonates appear in seven thin sections as
- 18 March 2025
- Published by Copernicus GmbH
Open AccessPorosity structures and local compositional variations associated with natural CO2 sequestration in basalts offshore Norway
Permanent storage of CO2 as carbonates in basalt deposits utilises natural weathering reactions between silicate minerals and carbonic water. By studying how CO2-enriched water has altered basalt in 43 samples from the Vøring Margin, offshore Norway, we demonstrate the pathways and reactions of CO2 within a basalt reservoir.The pore spaces occupied by carbonates in the samples were studied through μ-CT (computer tomography) studies on three minicores and detailed microanalyses on 32 thin sections via scanning electron microscopy (SEM), electron microprobe analysis, and electron backscatter diffraction (EBSD). Single crystal X-ray diffraction on 15 samples determined the type of carbonate minerals and precipitation ages were determined for two samples through U/Pb-radiomeric dating. δ18O and δ13C-isotope analyses were used to determine the fluid origin in 11 samples.Three types of carbonate precipitation were characterised based on the pore structures they fill and the associated mineralogy. Type I carbonates, seen in 18 thin sections, fills vesicles, mainly along lava flow margins. SEM analyses showed that all vesicles are initially coated with a smectite layer which incorporates most of the Mg2+ and Fe2+ from dissolving silicate minerals. As pH and Ca concentrations increase, calcite precipitates in some vesicles. The secondary mineral assemblage and precipitation order fit with low-temperature alteration of basalt with pore water and atmospherically balanced CO2 levels (pH≥8). Type II carbonates appear in seven thin sections as
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Deformation and healing processes in the damage zone of a lower-crustal seismogenic fault
In anhydrous, strong, and metastable lower-crustal rocks, coseismic fracturing is an effective mechanism for creating pathways for fluids to infiltrate and interact with the host rock, ultimately resulting in metamorphism and rheological weakening. In this study, we have characterized the damage zone flanking a lower-crustal pseudotachylyte (solidified frictional melt produced during seismic slip) to understand the fracture generating and fluid-assisted healing processes operating during and immediately after a seismic event.The Nusfjord East shear zone (Lofoten, Norway) is a network of coeval pseudotachylytes and mylonitized pseudotachylytes that formed at lower-crustal conditions within anhydrous anorthosites. We present a micro- and nanostructural analysis focusing on plagioclase in the damage zone of a pseudotachylyte using focused ion beam (FIB) prepared scanning transmission electron microscopy (STEM), Fourier Transform Infrared (FTIR) Spectroscopy, electron backscatter diffraction (EBSD) analysis, electron microprobe analysis (EMPA), and SEM-cathodoluminescence (CL) imaging.The damage zone of the host anorthosite is characterized by a network of comminuted primary plagioclase (plagioclase1) grains with minimal offset. Very fine (
- 20 January 2025
- Published by Copernicus GmbH
Open AccessDeformation and healing processes in the damage zone of a lower-crustal seismogenic fault
In anhydrous, strong, and metastable lower-crustal rocks, coseismic fracturing is an effective mechanism for creating pathways for fluids to infiltrate and interact with the host rock, ultimately resulting in metamorphism and rheological weakening. In this study, we have characterized the damage zone flanking a lower-crustal pseudotachylyte (solidified frictional melt produced during seismic slip) to understand the fracture generating and fluid-assisted healing processes operating during and immediately after a seismic event.The Nusfjord East shear zone (Lofoten, Norway) is a network of coeval pseudotachylytes and mylonitized pseudotachylytes that formed at lower-crustal conditions within anhydrous anorthosites. We present a micro- and nanostructural analysis focusing on plagioclase in the damage zone of a pseudotachylyte using focused ion beam (FIB) prepared scanning transmission electron microscopy (STEM), Fourier Transform Infrared (FTIR) Spectroscopy, electron backscatter diffraction (EBSD) analysis, electron microprobe analysis (EMPA), and SEM-cathodoluminescence (CL) imaging.The damage zone of the host anorthosite is characterized by a network of comminuted primary plagioclase (plagioclase1) grains with minimal offset. Very fine (
- Open Access
- 9 March 2024
- Published by Copernicus GmbH
Natural CO2 Sequestration in Basalts from Offshore Norway: Observed Variations in Calcite Precipitation
Basalt presents large potential reservoirs for carbon mineral storage. CO2 can react with the minerals in the rock and precipitate carbonates, thereby becoming stored for geological timescales. Experimental studies and pilot injections in Iceland and the US have shown the feasibility of the method. However, there are still open questions related to how and where the CO2 flows and reacts in basaltic reservoirs. Samples of basalt from offshore mid-Norway containing naturally precipitated calcite have therefore been studied as natural analogues to such systems. This study aims to characterize where and under what conditions the calcite precipitated. The 30 samples were collected during IODP Expedition 396 (holes U1571A and U1572A) and are from a potential storage site called the Skoll High on the Vøring Margin. Scanning Electron Microscopy (SEM) and Electron Microprobe Analyzer (EMPA) were used to characterize the mineralogy and microstructures of the samples and identify different types of calcite precipitation. The groundmass of the basalt contains mostly clinopyroxene, plagioclase, and Ti- and Fe-oxides and is presently devoid of olivine. The basalt also contains large amounts of Mg- and Fe-rich clays. Other secondary minerals include calcite and minor amounts of sulfide and Ca-rich zeolites. All vesicles are either completely filled with clay or have a ca. 10–30 µm thick clay coating on their surface. In 16 out of the 32 studied thin sections, some of the clay-bearing vesicles were later completely or partially filled with calcite (Type I calcite). Calcite also precipitated in secondary pore spaces created as minerals weathered (Type II calcite, 5 samples). In two samples of seemingly impermeable basalt from the interior of a lava flow, calcite is present as ca. 10–70 µm wide crystals in and around clinopyroxene in the groundmass of the basalt (Type III calcite). Microprobe analysis of three representative samples indicates that Type I calcite contains the least and Type III calcite contains the highest amounts of Mg and Fe. Together with its type of occurrence, this composition suggests that Type III calcite partially replaces the pyroxene and could indicate an in-situ dissolution-precipitation reaction while there are no clear signs of in-situ dissolution and precipitation for Types I and II calcite. In conclusion, calcite is most commonly precipitating in the vesicles of the basalt but the CO2-rich fluid may also penetrate and react with the seemingly impermeable basalt groundmass and massive lava flow interiors. This suggests that there is a micro-pore network that is important for fluid flow in the basalt. A combination of micro-CT (computer tomography), Hg porosimetry, He pycnometry and gas adsorption with CO2 and N2 will, therefore, also be used to characterize the surface area, porosity and connectivity of the micro-pore network of the samples. In addition, the precipitation of calcite often appears passive, without coupled dissolution of local minerals. Instead, factors such as transport and fluid mixing, partial pressure, pH, alkalinity and temperature likely control precipitation. U/Pb dating and clumped isotope thermometry will also be performed on the calcite to constrain the timing and temperature during precipitation.
- 9 March 2024
- Published by Copernicus GmbH
Open AccessNatural CO2 Sequestration in Basalts from Offshore Norway: Observed Variations in Calcite Precipitation
Basalt presents large potential reservoirs for carbon mineral storage. CO2 can react with the minerals in the rock and precipitate carbonates, thereby becoming stored for geological timescales. Experimental studies and pilot injections in Iceland and the US have shown the feasibility of the method. However, there are still open questions related to how and where the CO2 flows and reacts in basaltic reservoirs. Samples of basalt from offshore mid-Norway containing naturally precipitated calcite have therefore been studied as natural analogues to such systems. This study aims to characterize where and under what conditions the calcite precipitated. The 30 samples were collected during IODP Expedition 396 (holes U1571A and U1572A) and are from a potential storage site called the Skoll High on the Vøring Margin. Scanning Electron Microscopy (SEM) and Electron Microprobe Analyzer (EMPA) were used to characterize the mineralogy and microstructures of the samples and identify different types of calcite precipitation. The groundmass of the basalt contains mostly clinopyroxene, plagioclase, and Ti- and Fe-oxides and is presently devoid of olivine. The basalt also contains large amounts of Mg- and Fe-rich clays. Other secondary minerals include calcite and minor amounts of sulfide and Ca-rich zeolites. All vesicles are either completely filled with clay or have a ca. 10–30 µm thick clay coating on their surface. In 16 out of the 32 studied thin sections, some of the clay-bearing vesicles were later completely or partially filled with calcite (Type I calcite). Calcite also precipitated in secondary pore spaces created as minerals weathered (Type II calcite, 5 samples). In two samples of seemingly impermeable basalt from the interior of a lava flow, calcite is present as ca. 10–70 µm wide crystals in and around clinopyroxene in the groundmass of the basalt (Type III calcite). Microprobe analysis of three representative samples indicates that Type I calcite contains the least and Type III calcite contains the highest amounts of Mg and Fe. Together with its type of occurrence, this composition suggests that Type III calcite partially replaces the pyroxene and could indicate an in-situ dissolution-precipitation reaction while there are no clear signs of in-situ dissolution and precipitation for Types I and II calcite. In conclusion, calcite is most commonly precipitating in the vesicles of the basalt but the CO2-rich fluid may also penetrate and react with the seemingly impermeable basalt groundmass and massive lava flow interiors. This suggests that there is a micro-pore network that is important for fluid flow in the basalt. A combination of micro-CT (computer tomography), Hg porosimetry, He pycnometry and gas adsorption with CO2 and N2 will, therefore, also be used to characterize the surface area, porosity and connectivity of the micro-pore network of the samples. In addition, the precipitation of calcite often appears passive, without coupled dissolution of local minerals. Instead, factors such as transport and fluid mixing, partial pressure, pH, alkalinity and temperature likely control precipitation. U/Pb dating and clumped isotope thermometry will also be performed on the calcite to constrain the timing and temperature during precipitation.
- Open Access
- 15 May 2023
- Published by Copernicus GmbH
Deformation and healing processes in the damage zone of a lower-crustal seismogenic fault
Coseismic fracturing of the lower crust is an effective mechanism for creating permeable pathways for fluids to infiltrate and interact with the host rock, thus effectively altering the rheology of otherwise anhydrous and strong lower-crustal rocks. Most of the fracturing and fragmentation that facilitate fluid infiltration occurs in the damage zone of seismogenic faults. In this study, we have focused on characterizing the damage zone adjacent to a lower-crustal pseudotachylyte (solidified frictional melt produced during seismic slip) to understand the fracture generating and healing processes during a seismic event.The Nusfjord East shear zone network (Lofoten, Norway) contains coeval pseudotachylytes and mylonitized pseudotachylytes that formed at lower-crustal conditions within anhydrous anorthosites. We present a micro- and nanostructural analysis of plagioclase grains in the damage zone of a natural pseudotachylyte using focused ion beam (FIB) prepared scanning transmission electron microscopy (S/TEM), electron backscatter diffraction (EBSD) analysis, electron microprobe analysis (EMPA), and SEM-cathodoluminescence (CL) imaging.The damage zone of the host anorthosite is characterized by a network of fractures with minimal offset, consistent with a pulverization-style fragmentation process. CL intensities differentiate primary plagioclase (plagioclase1), from secondary plagioclase neoblasts (plagioclase2) filling some of the fractures. Plagioclase1 grains often exhibit a diffuse CL intensity zonation from bright grain cores to a dark grey in healed cracks, while plagioclase2 have a uniform mid-tone grey CL intensity with dark grain boundaries. CL zonation in the plagioclase1 does not correlate with EMPA major element maps nor EBSD misorientation maps. TEM foils targeted key microstructure domains characterized by CL: (1) bright CL plagioclase1 core, (2) dark CL plagioclase1 in healed cracks, (3) transitional CL from bright to dark across a healed crack, and (4) plagioclase2 neoblast. Results from S/TEM show that the dark CL spanning the healed cracks is associated with a high concentration of crystalline nanoparticles. In contrast, bright CL is associated with a few scattered dislocations, no nanoparticles, and numerous dispersed Ba-Ti-oxide nanograins. The mid-tone grey CL plagioclase2 neoblast have the lowest dislocation density. Follow-up Transmission Kikuchi Diffraction (TKD) and NanoSIMS analyses on the nanoparticles in the healed cracks and the plagioclase1 grains immediately next to these cracks will help further elucidate the origins of the nanoparticles and the CL intensity zonation.
- 15 May 2023
- Published by Copernicus GmbH
Open AccessDeformation and healing processes in the damage zone of a lower-crustal seismogenic fault
Coseismic fracturing of the lower crust is an effective mechanism for creating permeable pathways for fluids to infiltrate and interact with the host rock, thus effectively altering the rheology of otherwise anhydrous and strong lower-crustal rocks. Most of the fracturing and fragmentation that facilitate fluid infiltration occurs in the damage zone of seismogenic faults. In this study, we have focused on characterizing the damage zone adjacent to a lower-crustal pseudotachylyte (solidified frictional melt produced during seismic slip) to understand the fracture generating and healing processes during a seismic event.The Nusfjord East shear zone network (Lofoten, Norway) contains coeval pseudotachylytes and mylonitized pseudotachylytes that formed at lower-crustal conditions within anhydrous anorthosites. We present a micro- and nanostructural analysis of plagioclase grains in the damage zone of a natural pseudotachylyte using focused ion beam (FIB) prepared scanning transmission electron microscopy (S/TEM), electron backscatter diffraction (EBSD) analysis, electron microprobe analysis (EMPA), and SEM-cathodoluminescence (CL) imaging.The damage zone of the host anorthosite is characterized by a network of fractures with minimal offset, consistent with a pulverization-style fragmentation process. CL intensities differentiate primary plagioclase (plagioclase1), from secondary plagioclase neoblasts (plagioclase2) filling some of the fractures. Plagioclase1 grains often exhibit a diffuse CL intensity zonation from bright grain cores to a dark grey in healed cracks, while plagioclase2 have a uniform mid-tone grey CL intensity with dark grain boundaries. CL zonation in the plagioclase1 does not correlate with EMPA major element maps nor EBSD misorientation maps. TEM foils targeted key microstructure domains characterized by CL: (1) bright CL plagioclase1 core, (2) dark CL plagioclase1 in healed cracks, (3) transitional CL from bright to dark across a healed crack, and (4) plagioclase2 neoblast. Results from S/TEM show that the dark CL spanning the healed cracks is associated with a high concentration of crystalline nanoparticles. In contrast, bright CL is associated with a few scattered dislocations, no nanoparticles, and numerous dispersed Ba-Ti-oxide nanograins. The mid-tone grey CL plagioclase2 neoblast have the lowest dislocation density. Follow-up Transmission Kikuchi Diffraction (TKD) and NanoSIMS analyses on the nanoparticles in the healed cracks and the plagioclase1 grains immediately next to these cracks will help further elucidate the origins of the nanoparticles and the CL intensity zonation.
- Open Access
- 15 May 2023
- Published by Copernicus GmbH
Formation and evolution of inversely-zoned “complex feldspar” in the lower crust
Within and near lower crustal shear zones, plagioclase grains frequently exhibit a peculiar compositional zonation: Albite-rich single crystals contain anorthite-rich lamellae and smaller, polygonal grains show an increase in anorthite-content from core to rim. This is the opposite of the zonation that develops during fractional crystallization in magmatic systems. Both the changes in plagioclase compositions and associated grain size reductions may affect rock rheology. Therefore, these microstructures may potentially provide valuable information about shear zone development and the behaviour of plagioclase-rich lower crustal rocks during an orogeny.Next to shear zones in gabbronorites of the Ramberg section (Lofoten, Northern Norway), we observe both endmember microstructures (anorthite-rich inclusions in larger single crystals and zoned polygonal grains) as well as transitions between them. These were investigate in detail with scanning electron microscopy, including electron backscatter diffraction, and transmission electron microscopy.The microstructures range from isolated, anorthite-rich lamellae in the host albite-richer plagioclase, via connected networks of anorthite-rich plagioclase within plagioclase single-crystals, to polygonal plagioclase grains with anorthite-rich rims close to the shear zones. These grains occur in clusters of similar orientation (presumably representing pre-existing larger grains). Preliminary work suggests that the plagioclase experienced an overall enrichment in Ca, which implies that fluid introduction played an important role during the reaction. The orientations of the anorthite-rich lamellae do not appear to be influenced by the crystallography of the host grain. Additionally, the density of the lamellae is highest in areas between grains of other phases than plagioclase, suggesting a stress-control on the reaction.Ongoing transmission-electron microscopy work will help to understand whether the transition between the different microstructures is only spatial, or also temporal: Did the polygonal microstructure develop from the lamella-type microstructure, or are they expressions of the same event at different stress levels and/or fluid contents?
- 15 May 2023
- Published by Copernicus GmbH
Open AccessFormation and evolution of inversely-zoned “complex feldspar” in the lower crust
Within and near lower crustal shear zones, plagioclase grains frequently exhibit a peculiar compositional zonation: Albite-rich single crystals contain anorthite-rich lamellae and smaller, polygonal grains show an increase in anorthite-content from core to rim. This is the opposite of the zonation that develops during fractional crystallization in magmatic systems. Both the changes in plagioclase compositions and associated grain size reductions may affect rock rheology. Therefore, these microstructures may potentially provide valuable information about shear zone development and the behaviour of plagioclase-rich lower crustal rocks during an orogeny.Next to shear zones in gabbronorites of the Ramberg section (Lofoten, Northern Norway), we observe both endmember microstructures (anorthite-rich inclusions in larger single crystals and zoned polygonal grains) as well as transitions between them. These were investigate in detail with scanning electron microscopy, including electron backscatter diffraction, and transmission electron microscopy.The microstructures range from isolated, anorthite-rich lamellae in the host albite-richer plagioclase, via connected networks of anorthite-rich plagioclase within plagioclase single-crystals, to polygonal plagioclase grains with anorthite-rich rims close to the shear zones. These grains occur in clusters of similar orientation (presumably representing pre-existing larger grains). Preliminary work suggests that the plagioclase experienced an overall enrichment in Ca, which implies that fluid introduction played an important role during the reaction. The orientations of the anorthite-rich lamellae do not appear to be influenced by the crystallography of the host grain. Additionally, the density of the lamellae is highest in areas between grains of other phases than plagioclase, suggesting a stress-control on the reaction.Ongoing transmission-electron microscopy work will help to understand whether the transition between the different microstructures is only spatial, or also temporal: Did the polygonal microstructure develop from the lamella-type microstructure, or are they expressions of the same event at different stress levels and/or fluid contents?
- Open Access
- 7 July 2022
- Published by Wiley in Journal of Metamorphic Geology
- Vol. 40 (9) , 1467-1492
Low‐grade prehnite‐pumpellyite facies metamorphism and metasomatism in basement rocks adjacent to the Permian Oslo rift: The importance of displacive reactions
The Kongsberg and Bamble lithotectonic domains of SE‐Norway are known as classical Precambrian high‐grade metamorphic terrains. The area has undergone extensive metasomatism with formation of albitites and scapolite‐rich rocks and numbers of previously economically important deposits including the Kongsberg Silver and the Modum Cobalt mines. We demonstrate here that the central part of the Bamble lithotectonic domain (Kragerø area) has locally developed low‐grade metamorphic minerals (prehnite, pumpellyite, analcime, stilpnomelane and thomsonite) belonging to the prehnite‐pumpellyite and zeolite facies. Structurally, the low‐grade minerals occur as fracture fills, in the alteration selvages around fractures where the rock is albitized, and along shear zones and cataclastic zones. The fracture fill and the alteration selvages vary from millimetres scale to 1 m in thickness. The fractures with low‐grade minerals are part of larger fracture systems. The low‐grade minerals typically formed by both displacive (swelling) and replacive reactions and in a combination of these. Prehnite together with albite, K‐feldspar, quartz, epidote and hydrogarnet form lenses along (001) faces in biotite and chlorite leading to bending of the sheet silicates through a displacive reaction mechanism. Numerous replacement reactions including the earlier minerals as well as the low‐grade minerals occur. As albite, K‐feldspar, talc, quartz, actinolite, titanite, calcite and hydrogrossular form in the same veins and in the same biotite grain as the classical low‐grade minerals, they probably belong to the low‐grade assemblage and some of the albitization in the region presumably occurred at low‐grade conditions. Alteration of olivine (Fo69) at low‐grade conditions results in the formation of clay minerals including ferroan saponite. Reconnaissance studies at the east (Idefjord lithotectonic domain) and the northwest (Kongsberg lithotectonic domain) sides of the Oslo rift together with reports of low‐grade assemblages in south‐western Sweden along the continuation of the rift into Skagerrak suggest that the low grade assembles occur in rocks adjacent to the Oslo rift along its full extent. Ar‐Ar dating of K‐feldspar from the low‐grade assemblages gave an age of 265.2 ± 0.4 Ma (MSWD = 0.514 and P = 0.766), suggesting that the low‐grade metamorphism and some of the metasomatism is induced by fluids and heat from the magmatic activity of the Permian Oslo rift, which requires transport of fluid over distances of several kilometres. The metamorphic conditions are constrained by stability fields of prehnite, pumpellyite and analcime to be less than 250°C and at a pressure less than 5 kbars. The displacive reactions created micro‐fractures and porosity in the adjacent minerals that enhance fluid flow and low‐grade mineral formation on a local scale. On a thin section scale, the displacive growth of albite in biotite results in a local volume increase of several 100%. Whether the opening of the larger, horizontally oriented fracture systems needed to transport the fluid over a distance of several kilometres was also the results of displacive reactions remains unknown. The low‐grade metamorphism and metasomatism formed in the shoulder of the Oslo rift and may have contributed to its uplift.
- 7 July 2022
- Published by Wiley in Journal of Metamorphic Geology
- Vol. 40 (9) , 1467-1492
Open AccessLow‐grade prehnite‐pumpellyite facies metamorphism and metasomatism in basement rocks adjacent to the Permian Oslo rift: The importance of displacive reactions
The Kongsberg and Bamble lithotectonic domains of SE‐Norway are known as classical Precambrian high‐grade metamorphic terrains. The area has undergone extensive metasomatism with formation of albitites and scapolite‐rich rocks and numbers of previously economically important deposits including the Kongsberg Silver and the Modum Cobalt mines. We demonstrate here that the central part of the Bamble lithotectonic domain (Kragerø area) has locally developed low‐grade metamorphic minerals (prehnite, pumpellyite, analcime, stilpnomelane and thomsonite) belonging to the prehnite‐pumpellyite and zeolite facies. Structurally, the low‐grade minerals occur as fracture fills, in the alteration selvages around fractures where the rock is albitized, and along shear zones and cataclastic zones. The fracture fill and the alteration selvages vary from millimetres scale to 1 m in thickness. The fractures with low‐grade minerals are part of larger fracture systems. The low‐grade minerals typically formed by both displacive (swelling) and replacive reactions and in a combination of these. Prehnite together with albite, K‐feldspar, quartz, epidote and hydrogarnet form lenses along (001) faces in biotite and chlorite leading to bending of the sheet silicates through a displacive reaction mechanism. Numerous replacement reactions including the earlier minerals as well as the low‐grade minerals occur. As albite, K‐feldspar, talc, quartz, actinolite, titanite, calcite and hydrogrossular form in the same veins and in the same biotite grain as the classical low‐grade minerals, they probably belong to the low‐grade assemblage and some of the albitization in the region presumably occurred at low‐grade conditions. Alteration of olivine (Fo69) at low‐grade conditions results in the formation of clay minerals including ferroan saponite. Reconnaissance studies at the east (Idefjord lithotectonic domain) and the northwest (Kongsberg lithotectonic domain) sides of the Oslo rift together with reports of low‐grade assemblages in south‐western Sweden along the continuation of the rift into Skagerrak suggest that the low grade assembles occur in rocks adjacent to the Oslo rift along its full extent. Ar‐Ar dating of K‐feldspar from the low‐grade assemblages gave an age of 265.2 ± 0.4 Ma (MSWD = 0.514 and P = 0.766), suggesting that the low‐grade metamorphism and some of the metasomatism is induced by fluids and heat from the magmatic activity of the Permian Oslo rift, which requires transport of fluid over distances of several kilometres. The metamorphic conditions are constrained by stability fields of prehnite, pumpellyite and analcime to be less than 250°C and at a pressure less than 5 kbars. The displacive reactions created micro‐fractures and porosity in the adjacent minerals that enhance fluid flow and low‐grade mineral formation on a local scale. On a thin section scale, the displacive growth of albite in biotite results in a local volume increase of several 100%. Whether the opening of the larger, horizontally oriented fracture systems needed to transport the fluid over a distance of several kilometres was also the results of displacive reactions remains unknown. The low‐grade metamorphism and metasomatism formed in the shoulder of the Oslo rift and may have contributed to its uplift.
- Open Access
- 28 March 2022
- Published by Copernicus GmbH
Weakening mechanisms in dry, lower-crustal pseudotachylytes
Earthquakes are often regarded as agents of rheological weakening of the dry and mechanically strong lower crust. The weakening is typically attributed to fluid infiltration and resulting fluid-mediated metamorphism along the seismic fault.On Moskenesøya in SW Lofoten (Northern Norway), we observe lower-crustal pseudotachylytes (frozen frictional melts that record fossil earthquakes) that are unusually dry. This presents us with an exceptional opportunity to study the processes affecting the rocks during and after an earthquake:We can observe the pristine microstructures of the pseudotachylytes, not overprinted by later metamorphism, to elucidate the earthquake-generating mechanism. We can study the further development of these dry pseudotachylytes after the seismic event. We have previously described the composition and microstructures of the pristine pseudotachylytes, and concluded that transient stress pulses caused by shallower earthquakes are the most likely explanation for the occurrence of fossil earthquakes in the analysed rocks from Lofoten, with no evidence of other mechanisms such as thermal runaway or dehydration embrittlement.In this contribution, we focus on the evolution of the pseudotachylytes after their formation. We study their development from the initial, pristine pseudotachylytes, via pseudotachylytes with slightly mylonitized margins, to ultramylonites. We use compositional and microstructural analyses, including electron backscatter diffraction (EBSD), to understand the weakening mechanisms in this dry system.In the mylonitized margins of the pseudotachylytes, a slight shape-preferred orientation is developed and the quenching microstructures, such as microlites, are lost. The mineralogical composition (dominantly feldspars and pyroxenes) stays the same as in the pristine pseudotachylytes. In the ultramylonite, quartz and amphibole appear as accessory minerals, which means that we cannot completely exclude the presence of minor amounts of hydrous fluids; however, feldspars and pyroxenes persist as the main components of the rock. The foliation of the ultramylonite is not defined by phyllosilicates, but by a compositional banding, which suggest a phase separation and aggregation during shearing. EBSD data indicate that the main constituent phases deformed dominantly by grain size sensitive creep.Our preliminary results suggest that even in the absence of fluids, pseudotachylyte-bearing seismic faults represent weak zones in the lower crust that are localizing viscous shear during post- and interseismic deformation, presumably due to the intense grain size reduction that facilitates grain-size sensitive mechanisms.
- 28 March 2022
- Published by Copernicus GmbH
Open AccessWeakening mechanisms in dry, lower-crustal pseudotachylytes
Earthquakes are often regarded as agents of rheological weakening of the dry and mechanically strong lower crust. The weakening is typically attributed to fluid infiltration and resulting fluid-mediated metamorphism along the seismic fault.On Moskenesøya in SW Lofoten (Northern Norway), we observe lower-crustal pseudotachylytes (frozen frictional melts that record fossil earthquakes) that are unusually dry. This presents us with an exceptional opportunity to study the processes affecting the rocks during and after an earthquake:We can observe the pristine microstructures of the pseudotachylytes, not overprinted by later metamorphism, to elucidate the earthquake-generating mechanism. We can study the further development of these dry pseudotachylytes after the seismic event. We have previously described the composition and microstructures of the pristine pseudotachylytes, and concluded that transient stress pulses caused by shallower earthquakes are the most likely explanation for the occurrence of fossil earthquakes in the analysed rocks from Lofoten, with no evidence of other mechanisms such as thermal runaway or dehydration embrittlement.In this contribution, we focus on the evolution of the pseudotachylytes after their formation. We study their development from the initial, pristine pseudotachylytes, via pseudotachylytes with slightly mylonitized margins, to ultramylonites. We use compositional and microstructural analyses, including electron backscatter diffraction (EBSD), to understand the weakening mechanisms in this dry system.In the mylonitized margins of the pseudotachylytes, a slight shape-preferred orientation is developed and the quenching microstructures, such as microlites, are lost. The mineralogical composition (dominantly feldspars and pyroxenes) stays the same as in the pristine pseudotachylytes. In the ultramylonite, quartz and amphibole appear as accessory minerals, which means that we cannot completely exclude the presence of minor amounts of hydrous fluids; however, feldspars and pyroxenes persist as the main components of the rock. The foliation of the ultramylonite is not defined by phyllosilicates, but by a compositional banding, which suggest a phase separation and aggregation during shearing. EBSD data indicate that the main constituent phases deformed dominantly by grain size sensitive creep.Our preliminary results suggest that even in the absence of fluids, pseudotachylyte-bearing seismic faults represent weak zones in the lower crust that are localizing viscous shear during post- and interseismic deformation, presumably due to the intense grain size reduction that facilitates grain-size sensitive mechanisms.