VPVikas M. Phalle

Vikas M. Phalle

*This is an algorithmically generated author record based on publicly available information.

Vikas M. Phalle has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Acti-V-Link: An Active Surface, Visual Feedback Based, Mechanically Underactuated Gripper for In-Hand Manipulation

    by Karthik Swaminathan, Mohammed Saad Hashmi, Alqama Shaikh, Vikas Phalle

    End-effectors in a robotic system generally have the role of executing operations related to manipulating and handling the objects. The traditional grippers are restricted to the scope of performing a specific task, which limits their capability of adapting to changes in the physical properties of the objects. The grippers can become more efficient when integrated with a sub-system catering to manipulating varied-sized objects within the existing gripper workspace. Many state-of-the-art methods have used tendon-based and active surface (belt-driven) actuation techniques to effectively change the pose of a wide range of objects within the gripper (in hand). We propose the design of a gripper system that leverages the role of an active surface-based actuation technique integrated with an underactuated linkage mechanism capable of performing complex manipulations. We have curated an object list, all having different shapes, and executed experimental rotation and translation of objects. We take the help of vision-based feedback to accurately execute targeted goal pose motion and additionally demonstrate the gripper’s response to mechanical stresses (through analysis) and grasping an object through torque feedback.

  • Comparative characteristics of hydrostatic conical hole-entry journal bearing with CFV, orifice and capillary restrictors

    by Prashant G. Khakse, Vikas M. Phalle

    The present comparison is mainly based on the type of restrictor employed in the conical journal bearing with hole-entry in hydrostatic mode. It suggests efficient restrictor to be used in the subjected conical journal bearing. To find the characteristics, Reynolds's equation is applied to the fluid present in the space between conical journal and bearing, the flow equations for various restrictors have been presented using FEM. Different parametric characteristics have been obtained for the range of eccentricity ratio ( ε) = 0.1–0.7. The outcome of the comparative characteristics depict the significant variations in the restrictor-based conical hole-entry journal bearing performances in hydrostatic mode which may be useful for the bearing designer to precisely design the conical hole-entry journal bearing. Comparatively, the constant flow valve fitted hydrostatic conical journal bearing with hole-entry may be recommended based on the present study.


  • Open Access

    Influence of eccentricity ratio on stability performance of hydrodynamic conical journal bearing

    by A. K. Gangrade, V. M. Phalle, S. S. Mantha, A. N. Siddiquee

    Due to growing need of conical journal bearings for combined axial and radial load application, efforts are being made to explore suitability of various shapes of hydrodynamic conical journal bearings. The combined load carrying ability of conical journal bearings appear as a better option to employ in rotary-machines and added applications. Thus, in this research work, efforts have been made to explore the stability performance of hydrodynamic conical journal bearing by finite element analysis. The bearing performance have been examined for semi-cone angle (γ= 5°, 10°, 20°) and eccentricity ratio (ε) up to 0.6 for rotor speed (v= 2.6, 5.2m/s). Results are presented for axial and radial load capacity, stiffness and damping constants and rotor threshold speed. Load carrying capacity is improved with semicone angles and journal operating speed. Stability performance of bearing as a threshold speed (ω¯th) decreases with increase of semi cone angle. Hence, selection of journal operating speed and semi-cone angle is significant for dynamic stability of conical journal bearing.


  • Open Access

    Remaining useful life (RUL) prediction of bearing by using regression model and principal component analysis (PCA) technique

    by Apakrita Tayade, Sangram Patil, Vikas Phalle, Faruk Kazi, Satvasheel Powar

    A wind turbine works under variable load and environmental conditions because of which failure rate has been on the rise. Failure of a gearbox, an integral part of producing wind energy, contributes to 80 % of the total downtime for the wind turbine. For ensuring better utilization of the wind turbines, Fault prognosis and condition monitoring of bearings are of utmost importance as it helps to reduce the downtime by early detection of faults which further increases the power output. In this paper, vibration signals produced and machine learning approach to determine the Remaining Useful Life (RUL) for a degraded bearing is studied. The methodology includes statistical feature extraction analysis with regression models. Further the feature selection is done using Principal Component Analysis (PCA) technique which produces training and testing sets which acts as an input parameter for regression models such as Support Vector Regressor (SVR) and Random Forest (RF). Weibull Hazard Rate Function is used for calculating the RUL of the bearing. Results This study shows the potential application of regression model as an effective tool for degradation performance prediction of bearing.


  • Open Access

    Optimization of process parameters to improve dimensional accuracy of investment casting using Taguchi approach

    by Sangita N Bansode, Vikas M Phalle, Shankar S Mantha

    In this study, Taguchi method is used to investigate the effect of critical process parameters of investment casting on dimensional variations of thin walled, complex geometrical stainless steel component. A set of experiments have been conducted to calculate shrinkages which is a measure of dimensional variation. The process parameters considered here are number of ceramic coats, pouring time, pouring temperature, and casting cooling rate. The signal-to-noise ratio and analysis of variance are used to study the influence of these parameters on shrinkage. Optimized condition for reduced shrinkage deviation can be obtained by selecting lower number of ceramic coats, faster and laminar metal pouring, lower superheated metal temperature, and faster cooling rate. Analysis of variance reports that the number of ceramic coats is the most significant parameter with more than 80% contribution whereas other parameters are insignificant. Investigation results also indicate that constraint dimension (width) has 25%–27% higher dimensional variability than non-constraint dimensions (height) for the selected component.


  • Effect of wear on the performance of hole entry hybrid conical journal bearing employing constant flow valve compensation

    by Sanjay R Pawar, Vikas M Phalle

    Hybrid bearings gets worn gradually during the start and stop operation. This wearing leads to change in the geometry of bearing and affects the radical clearance as well as fluid film thickness. Therefore, these discontinuities in the radial clearance can influence the performance characteristics. With the purpose of preventing irreparable failure state of bearing assembly, it is essential to concentrate on the actual changes in the performance parameters of hole entry hybrid conical journal bearing due to wear. In this context, the main aim of this analysis is to predict the performance of hole entry hybrid conical journal bearing employing constant flow valve compensation. Modified Reynolds equation in spherical coordinate form is used to govern the flow of lubricant in the narrow region between journal and conical bearing. The solution to this Reynolds equation is obtained by finite element analysis with appropriate boundary conditions. This paper summarizes that for a given bearing with constant flow valve as compensating element, the wear causes variation in lubricant film thickness, which strongly affects load capacity, pressure generated, and dynamic performance parameters.


  • Influence of wear on the performance of capillary compensated hole entry hybrid conical journal bearing

    by Sanjay Rangrao Pawar, Vikas M. Phalle

    Purpose: Hybrid conical journal bearings have received great attraction by design engineers and researchers due to their incomparable performance. However, performance of these bearings is affected due to wear. This paper aims to present an analytical study concerning the performance of hole entry worn hybrid conical journal bearings. Design/methodology/approach: The Reynolds equation governing the flow of lubricant in the clearance space along with the restrictor flow equations has been solved using finite element method. Findings: The numerically simulated results of worn bearing performance parameters indicate significant change in the performance due to wear. Therefore, for semi cone angle γ = 25°, the value of C¯22 reduces by 24.6 per cent at the wear value of about 50 per cent of radial clearance for the given configuration of bearing. Originality/value: The present results are original of its kind and surely useful to bearing designers and researchers in predicting actual performance of worn hole entry hybrid conical journal bearing.


  • Analysis of Passive Retrofitting Measures for Reduced Electricity Demand

    by Jaya Goyal, S.S. Mantha, V.M. Phalle

    The aim of this work is to determine the effective passive measures to enhance the thermal comfort of the building envelop. Passive measures are those measures which reduce electricity demand but do not require any electricity to operate. The building components such as walls, roof and window are exposed to solar radiation and outside air temperature. Heat is conducted from exterior environment into the interior of the building envelop through these channels, wherein majority (approx. 60%) is conducted by walls and roof. Envelop insulation is considered as an efficient retrofitting measure to reduce heat gain from walls and roof. In this study, a techno-economic model has been investigated to obtain optimum insulation thickness (OIT) for the residential buildings in the three climate zones of India. Four types of commonly used insulation materials analysed are: expanded polystyrene (EPS), extruded polystyrene (XPS), fiberglass and polyurethane foam (PUF). The effect of cooling design temperature and the coefficient of performance (COP) of air conditioners on the insulation thickness were also investigated. Fiberglass is observed as the most cost effective insulation material, considering life cycle performance of the insulation material for all the climate zones. It was also concluded that air-conditioner with higher COP can potentially reduce the insulation cost.