Timo Jaeschke
Timo Jaeschke has a total of 74 co-authors. Here are the top co-authors by number of shared publications:
- Nils Pohl
Ruhr University Bochum
33 shared publications C. Bredendiek
Fraunhofer FHR, 53343 Wachtberg, Germany
6 shared publicationsThomas Musch
6 shared publicationsChristoph Baer
5 shared publicationsSven Thomas
Fraunhofer Institute for High Frequency Physics and Radar Techniques FHR, Wachtberg, Germany
5 shared publicationsKlaus Aufinger
Infineon Technologies AG, Neubiberg, Germany
4 shared publications
Latest Publications
- Open Access
- 23 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (11) , 4628-4638
Deep Learning-Based Material Characterization Using FMCW Radar With Open-Set Recognition Technique
This article proposes a low-cost and practical alternative to vector network analyzers (VNAs) for characterizing dielectric materials using a calibrated frequency-modulated continuous wave (FMCW) radar measurement setup and a machine learning (ML) model. The calibrated FMCW radar measurement setup has the ability to accurately measure the $S$ -parameters of dielectric materials. In addition, an ML model is developed to extract material parameters such as thickness, dielectric constant, and loss tangent with high accuracy. $K$ -means clustering was additionally applied to significantly reduce the complexity of the neural network (NN). Additionally, a state-of-the-art open-set recognition (OSR) technique was adopted to simultaneously classify known classes and reject unknown classes. The developed model uses a modified version of the class anchor clustering (CAC) distance-based loss, which outperforms the conventional cross-entropy loss. The proposed model was evaluated on several dielectric materials and compared to reference measurements using a VNA and curve fitting. The results indicate that the proposed model is accurate and robust, and that the calibrated radar sensor provides a practical and cost-effective alternative to VNAs in characterizing dielectric materials, as long as the material parameters are within the defined limits.
- 23 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (11) , 4628-4638
Open AccessDeep Learning-Based Material Characterization Using FMCW Radar With Open-Set Recognition Technique
This article proposes a low-cost and practical alternative to vector network analyzers (VNAs) for characterizing dielectric materials using a calibrated frequency-modulated continuous wave (FMCW) radar measurement setup and a machine learning (ML) model. The calibrated FMCW radar measurement setup has the ability to accurately measure the $S$ -parameters of dielectric materials. In addition, an ML model is developed to extract material parameters such as thickness, dielectric constant, and loss tangent with high accuracy. $K$ -means clustering was additionally applied to significantly reduce the complexity of the neural network (NN). Additionally, a state-of-the-art open-set recognition (OSR) technique was adopted to simultaneously classify known classes and reject unknown classes. The developed model uses a modified version of the class anchor clustering (CAC) distance-based loss, which outperforms the conventional cross-entropy loss. The proposed model was evaluated on several dielectric materials and compared to reference measurements using a VNA and curve fitting. The results indicate that the proposed model is accurate and robust, and that the calibrated radar sensor provides a practical and cost-effective alternative to VNAs in characterizing dielectric materials, as long as the material parameters are within the defined limits.
- Open Access
- 23 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 70 (11) , 5259-5270
Distance Measurement Using mmWave Radar: Micron Accuracy at Medium Range
This work provides a proof-of-concept for a linear-position sensor using an ultrawideband (UWB) frequency-modulated continuous wave (FMCW) radar system operating at 126–182 GHz. It is the first work to show environmental compensated and calibration-free distance measurements with micron accuracy at medium range using millimeter-wave (mmWave) radar technology. We addressed hardware imperfections, parameter estimation, and the free-space path, i.e., refractive index and near-field effects. The proposed signal processing chain is robust to interference and of low computational cost. Experiments reveal a systematic error of$\pm$ 1$\mu$ m over 4.8 m (0.8–5.6 m), and a random error at a minimum of 30 nm, providing very high sensitivity.- 23 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 70 (11) , 5259-5270
Open AccessDistance Measurement Using mmWave Radar: Micron Accuracy at Medium Range
This work provides a proof-of-concept for a linear-position sensor using an ultrawideband (UWB) frequency-modulated continuous wave (FMCW) radar system operating at 126–182 GHz. It is the first work to show environmental compensated and calibration-free distance measurements with micron accuracy at medium range using millimeter-wave (mmWave) radar technology. We addressed hardware imperfections, parameter estimation, and the free-space path, i.e., refractive index and near-field effects. The proposed signal processing chain is robust to interference and of low computational cost. Experiments reveal a systematic error of$\pm$ 1$\mu$ m over 4.8 m (0.8–5.6 m), and a random error at a minimum of 30 nm, providing very high sensitivity. - 9 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 30 (2) , 216-218
A Fully Integrated SiGe Radar Sensor for Aerosol Flow Rate Measurements
This letter introduces a bistatic W-band continuous wave radar sensor based on a silicon-germanium (SiGe) transceiver chip with respect to its ability to measure aerosol streams with particles in the micrometer range. The introduced homodyne SiGe sensor relies on a phase-locked loop (PLL)-stabilized oscillator embedded into a monolithic microwave integrated circuit (MMIC), while up until now particle stream monitoring radars are built as waveguide systems. After the radar hardware, including the bistatic antenna configuration, is examined, the physical relationships between the particle stream and the hardware parameters are given. Finally, two different experiments with coarse metallic steel particles and fine coffee powder streams are presented and analyzed.
- 9 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 30 (2) , 216-218
A Fully Integrated SiGe Radar Sensor for Aerosol Flow Rate Measurements
This letter introduces a bistatic W-band continuous wave radar sensor based on a silicon-germanium (SiGe) transceiver chip with respect to its ability to measure aerosol streams with particles in the micrometer range. The introduced homodyne SiGe sensor relies on a phase-locked loop (PLL)-stabilized oscillator embedded into a monolithic microwave integrated circuit (MMIC), while up until now particle stream monitoring radars are built as waveguide systems. After the radar hardware, including the bistatic antenna configuration, is examined, the physical relationships between the particle stream and the hardware parameters are given. Finally, two different experiments with coarse metallic steel particles and fine coffee powder streams are presented and analyzed.
- Top Cited PapersOpen Access
- 18 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 67 (12) , 5360-5371
Enabling High Accuracy Distance Measurements With FMCW Radar Sensors
With the integrated radar technology being increasingly common in the automotive segment, it becomes even more cost-effective in other applications as well. Taking into account its price and robustness, radar sensors can be considered as a potential replacement for laser interferometry which is being widely used for accurate contactless sensing. In this paper we describe a phase evaluation algorithm for highly accurate distance measurements using linear frequency modulated continuous wave (FMCW) radar systems, considering hardware dependent effects i.,e. frequency responses of the signal paths. In several investigations we show that this novel algorithm is significantly more robust against disturbing radar targets or micro vibrations than typical techniques. Distance measurements were carried out using an 80 GHz wideband FMCW radar sensor on a maximum measurement range of 5.2 m with a movable radar target. For free space measurements the unambiguous measurement accuracy was improved to ±4.5 μm, using phase evaluation techniques in a non-ideal environment over the entire measurement range, which was previously around ±120 μm with frequency evaluation techniques. Due to its robustness and accuracy, the proposed algorithm is well suited for harsh industrial environments such as real time positioning of machine tools.
- 18 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 67 (12) , 5360-5371
Top Cited PapersOpen AccessEnabling High Accuracy Distance Measurements With FMCW Radar Sensors
With the integrated radar technology being increasingly common in the automotive segment, it becomes even more cost-effective in other applications as well. Taking into account its price and robustness, radar sensors can be considered as a potential replacement for laser interferometry which is being widely used for accurate contactless sensing. In this paper we describe a phase evaluation algorithm for highly accurate distance measurements using linear frequency modulated continuous wave (FMCW) radar systems, considering hardware dependent effects i.,e. frequency responses of the signal paths. In several investigations we show that this novel algorithm is significantly more robust against disturbing radar targets or micro vibrations than typical techniques. Distance measurements were carried out using an 80 GHz wideband FMCW radar sensor on a maximum measurement range of 5.2 m with a movable radar target. For free space measurements the unambiguous measurement accuracy was improved to ±4.5 μm, using phase evaluation techniques in a non-ideal environment over the entire measurement range, which was previously around ±120 μm with frequency evaluation techniques. Due to its robustness and accuracy, the proposed algorithm is well suited for harsh industrial environments such as real time positioning of machine tools.
- 1 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2285-2286
RCS Investigation of Tetrahedral Aligned Sphere Targets for Radar Positioning
This contribution presents the investigation of tetrahedral aligned sphere targets and their effect on radar measurements via sinograms. Here, the radar cross section (RCS) is evaluated in order to determine the distance and angle between radar and target for precise 3D industrial robot positioning. Therefore, the sinograms are simulated by a shooting and bouncing ray approach with CST Microwave Studio. Two different targets are investigated: One with equally sized and and one with differently sized spheres. While the former has ambiguities, which only allow an angle estimation within a certain range, the latter reduces these ambiguousness towards zero.
- 1 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2285-2286
RCS Investigation of Tetrahedral Aligned Sphere Targets for Radar Positioning
This contribution presents the investigation of tetrahedral aligned sphere targets and their effect on radar measurements via sinograms. Here, the radar cross section (RCS) is evaluated in order to determine the distance and angle between radar and target for precise 3D industrial robot positioning. Therefore, the sinograms are simulated by a shooting and bouncing ray approach with CST Microwave Studio. Two different targets are investigated: One with equally sized and and one with differently sized spheres. While the former has ambiguities, which only allow an angle estimation within a certain range, the latter reduces these ambiguousness towards zero.
- 1 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 65 (10) , 3640-3647
Influence of Radar Targets on the Accuracy of FMCW Radar Distance Measurements
Distance measurement tasks in micromachine tools need to be performed with micrometer accuracy. For such tasks, frequency-modulated continuous-wave (FMCW) radars with a combination of frequency and phase evaluations are a good choice. However, the accuracy cannot be indefinitely increased as there are constraints on the target size and placement imposed by the limited space inside micromachines. This paper investigates the influence of target geometry and position on the accuracy of its range estimation using a W-band FMCW radar with a bandwidth of 25 GHz. A relation between target geometry and accuracy is established through the Cramér-Rao lower bound (CRLB). Based on the measurements of different targets, an optimal shape and size is proposed, which provides an average accuracy in the single digit micrometer range. Furthermore, the influence of different bandwidths on the accuracy is investigated. It is also demonstrated how the CRLB can be used to optimize the size of a target, when a certain accuracy is needed. In addition, antenna field regions are analyzed for suitable target placements. Finally, the radar system is implemented in a machine tool and measurements with accuracies in the micrometer range are carried out.
- 1 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 65 (10) , 3640-3647
Influence of Radar Targets on the Accuracy of FMCW Radar Distance Measurements
Distance measurement tasks in micromachine tools need to be performed with micrometer accuracy. For such tasks, frequency-modulated continuous-wave (FMCW) radars with a combination of frequency and phase evaluations are a good choice. However, the accuracy cannot be indefinitely increased as there are constraints on the target size and placement imposed by the limited space inside micromachines. This paper investigates the influence of target geometry and position on the accuracy of its range estimation using a W-band FMCW radar with a bandwidth of 25 GHz. A relation between target geometry and accuracy is established through the Cramér-Rao lower bound (CRLB). Based on the measurements of different targets, an optimal shape and size is proposed, which provides an average accuracy in the single digit micrometer range. Furthermore, the influence of different bandwidths on the accuracy is investigated. It is also demonstrated how the CRLB can be used to optimize the size of a target, when a certain accuracy is needed. In addition, antenna field regions are analyzed for suitable target placements. Finally, the radar system is implemented in a machine tool and measurements with accuracies in the micrometer range are carried out.
- 1 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
A concept study for a radar-based navigation device with sector scan antenna for visually impaired people
One of the main challenges in everyday life of visually impaired people is the orientation in unknown environments. Especially the avoidance of collision with obstacles when walking in public places is a major problem. In this paper a concept for a radar based navigation device for visually impaired people is investigated. The device scans the environment around the user and translates the distance information into a 3D audio signal, which is fed to a hearing device. The main sensor is a highly integrated FMCW radar with a center frequency of 80 GHz and a bandwidth of 24 GHz. One of the main challenges in the development of the device is the design of an antenna that can be worn on the head and allows to scan a sufficient angle around the user.
- 1 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
A concept study for a radar-based navigation device with sector scan antenna for visually impaired people
One of the main challenges in everyday life of visually impaired people is the orientation in unknown environments. Especially the avoidance of collision with obstacles when walking in public places is a major problem. In this paper a concept for a radar based navigation device for visually impaired people is investigated. The device scans the environment around the user and translates the distance information into a 3D audio signal, which is fed to a hearing device. The main sensor is a highly integrated FMCW radar with a center frequency of 80 GHz and a bandwidth of 24 GHz. One of the main challenges in the development of the device is the design of an antenna that can be worn on the head and allows to scan a sufficient angle around the user.