GRGiancarlo Ripamonti

Giancarlo Ripamonti

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Giancarlo Ripamonti has a total of 483 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A new method for time measurements based on a VCO with 14 ps FWHM resolution

    by F. Caponio, A. Abba, A. Geraci, G. Ripamonti

    The precise measurement of time intervals is a primary goal in a growing number of applications and the challenge to achieve increasingly higher resolutions is a main topic of research. In this sense, time-of-flight measurements and time-correlated photon counting are two milestones. Since the intrinsic resolution of the sensors used today is in the order of tens of picoseconds, the measurement systems must guarantee performance at least of this order. The choice of making digital a part or the totality of the measurement electronic systems exploits well-known advantages from the adaptivity, to the versatile calibration, to the easiness of implementation of powerful processing algorithms, but also new methods must be put in place to significantly improve the resolution of the measurements. The well-established method for high-accuracy time interval measurements is the time-to-amplitude conversion (TAC). Another diffused method is the time-to-digital conversion (TDC), which has the advantage of easy integration. Methods based on phase measurements have also been proposed in literature. This work concerns a strategy of time measurement, with resolution of the order of few picoseconds, based on the additional features of very limited analog hardware, easy integrability in contexts where computation power is already present, no need of intensive calibration procedures, and minimizing the necessity of a-priori information.

  • Open Access

    Method for picosecond time interval measurements based on frequency‐switching sinusoidal shape

    by G. Ripamonti, F. Caponio

    If the wave output by a voltage controlled oscillator (VCO) has the property of having no phase jump also when its frequency is swiftly changed, the measures of the phase before and after a fast frequency change can be used for calculating the time at which such event has occurred. Based on this property, a precise time measurement instrument has been designed and built. A non‐optimised version has better than 100ps resolution full width at half maximum, is VCO drift compensated and is able to time events against a stable clock running at 312.5MHz. The VCO frequency of the prototype jumps from 47 to 59MHz. The analogue hardware is fairly limited. Applications may range from particle timing to time resolved fluorescence spectroscopy to range finding through time‐of‐flight methods.

  • Figures of merit for CMOS SPADs and arrays

    by D. Bronzi, F. Villa, S. Bellisai, S. Tisa, G. Ripamonti, A. Tosi

    SPADs (Single Photon Avalanche Diodes) are emerging as most suitable photodetectors for both single-photon counting (Fluorescence Correlation Spectroscopy, Lock-in 3D Ranging) and single-photon timing (Lidar, Fluorescence Lifetime Imaging, Diffuse Optical Imaging) applications. Different complementary metal-oxide semiconductor (CMOS) implementations have been reported in literature. We present some figure of merit able to summarize the typical SPAD performances (i.e. Dark Counting Rate, Photo Detection Efficiency, afterpulsing probability, hold-off time, timing jitter) and to identify a proper metric for SPAD comparison, both as single detectors and also as imaging arrays. The goal is to define a practical framework within which it is possible to rank detectors based on their performances in specific experimental conditions, for either photon-counting or photon-timing applications. Furthermore we review the performances of some CMOS and custom-made SPADs. Results show that CMOS SPADs performances improve as the technology scales down; moreover, miniaturization of SPADs and new solutions adopted to counteract issues related with the SPAD design (electric field uniformity, premature edge breakdown, tunneling effects, defect-rich STI interface) along with advances in standard CMOS processes led to a general improvement in all fabricated photodetectors; therefore, CMOS SPADs can be suitable for very dense and cost-effective many-pixels imagers with high performance


  • Large-area CMOS SPADs with very low dark counting rate

    by D. Bronzi, F. Villa, S. Bellisai, S. Tisa, A. Tosi, G. Ripamonti, F. Zappa, S. Weyers, D. Durini, W. Brockherde, et al.

    We designed and characterized Silicon Single-Photon Avalanche Diodes (SPADs) fabricated in a high-voltage 0.35 µm CMOS technology, achieving state-of-the-art low Dark Counting Rate (DCR), very large diameter, and extended Photon Detection Efficiency (PDE) in the Near Ultraviolet. So far, different groups fabricated CMOS SPADs in scaled technologies, but with many drawbacks in active area dimensions (just a few micrometers), excess bias (just few Volts), DCR (many hundreds of counts per second, cps, for small 10 µm devices) and PDE (just few tens % in the visible range). The novel CMOS SPAD structures with 50 mm, 100 µm, 200 µm and 500 µm diameters can be operated at room temperature and show DCR of 100 cps, 2 kcps, 20 kcps and 100 kcps, respectively, even when operated at 6 V excess bias. Thanks to the excellent performances, these large CMOS SPADs are exploitable in monolithic SPAD-based arrays with on-chip CMOS electronics, e.g. for time-resolved spectrometers with no need of microlenses (thanks to high fillfactor). Instead the smaller CMOS SPADs, e.g. the 10 µm devices with just 3 cps at room temperature and 6 V excess bias, are the viable candidates for dense 2D CMOS SPAD imagers and 3D Time-of-Flight ranging chips


  • Adaptive Filters for Digital Spectroscopy With Gaussian Peaks Preservation, Enhanced Rate and Low Frequency Noise Rejection

    by G. Ripamonti, A. Abba, F. Caponio, A. Geraci

    In the research for high rate-high resolution spectroscopy, adaptive filters are an interesting choice. We describe adaptive filters easy to implement in digital processors. By employing these filters the maximum rate that can be achieved is increased by a factor up to 30% in comparison with digital processors which use filters of fixed shape. Furthermore, the suppression of baseline wandering is increased up to a factor 10 and the resulting spectra have the definite advantage of exhibiting Gaussian peaks.

  • Digital programmable emulator and analyzer of radiation detection setups

    by A. Abba, F. Caponio, A. Geraci, G. Ripamonti

    We present a programmable digital instrument that is a generator and a processor of signals from radiation detectors. The appliance is particularly suited to be a design support in digital spectroscopy applications, both at hardware and firmware level. In fact, all parts of an acquisition and processing system after the detector can be physically emulated.

  • Top Cited Papers
    Open Access

    AGATA—Advanced GAmma Tracking Array

    by S. Akkoyun, A. Algora, B. Alikhani, F. Ameil, G. de Angelis, L. Arnold, A. Astier, A. Ataç, Y. Aubert, C. Aufranc, et al.


  • Design and test equipment of digital processors for output analysis from radiation detectors

    by A. Abba, F. Caponio, A. Geraci, G. Ripamonti

    The increasing development of configurable electronic systems for digital processing of signals from radiation detectors highlights the convenience of having more and more advanced equipment for support design and test of processing architectures from the hardware and firmware point of view. We propose a configurable design and test equipment that is able to emulate the detection process output on the basis of a description of detector and front-end electronics response that can be analytically calculated or experimentally measured. As case study, we fully developed the emulation of data in applications needing a precise knowledge of the time of occurrence of the events (e.g. coincidence/anti-coincidence, position detection, etc.) in strategic areas of medicine (e.g. PET imaging) such as particle physics (e.g. TDC, beam analysis).


  • Digital adaptive filtering for resolution and live-time maximization

    by A. Abba, A. Geraci, G. Ripamonti

    In many modern areas of application of detected radiation measurements, high rate and high resolution features are more and more a combination of primary importance of processors. In this scenario, it is well known that high resolution of measurements and high rate of pulses are conflicting issues, since the former requires filters as long as possible to approach the infinite length of the optimum filter, and the latter needs filters as short as possible to minimize the probability of pile-up corruption or needs mechanisms of pile-up rejection discarding too close pulses. This means a trade-off between live time of the system and precision of measurements. In this contribution we propose a digital processing procedure based on adaptive filters for maximizing both achievable resolution and sustainable rate. The method has been experimentally tested and validated on different configurable electronic devices.


  • Adaptive spectroscopy digital filters for enhanced rate and Gaussian peaks preservation

    by G. Ripamonti, A. Abba, F. Caponio, A. Geraci

    In the research for high rate - high resolution spectroscopy, adaptive filters have proven to be an interesting choice. We introduce adaptive filters which can be easily implemented in a digital processor, have a very good suppression of baseline wandering and the definite advantage of generating Gaussian peaks. Output rate can increase of more than 30% with respect to non-adaptive filters of identical duration. The filters belong to a category of shapings which include the zero-area Deyghton filters.