Benjamin Siebler
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Benjamin Siebler has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Stephan Sand
German Aerospace Center DLR
5 shared publications Uwe D. Hanebeck
Intelligent Sensor-Actuator-Systems Laboratory, Karlsruhe Institute of Technology (KIT), Germany
3 shared publications- Christian Gentner
German Aerospace Center (DLR), Institute of Communications and Navigation, Weling, Germany
2 shared publications - Martin Schmidhammer
German Aerospace Center (DLR), Institute of Communications and Navigation, Wessling, Germany
2 shared publications Stephan Sand
Institute of Communications and Navigation, German Aerospace Center (DLR), Germany
2 shared publicationsAndreas Lehner
Institute of Communications and Navigation, German Aerospace Center (DLR), Germany
1 shared publication
Latest Publications
- Open Access
Cramér–Rao Lower Bound for Magnetic Field Localization around Elementary Structures
The determination of a mobile terminal’s position with high accuracy and ubiquitous coverage is still challenging. Global satellite navigation systems (GNSSs) provide sufficient accuracy in areas with a clear view to the sky. For GNSS-denied environments like indoors, complementary positioning technologies are required. A promising approach is to use the Earth’s magnetic field for positioning. In open areas, the Earth’s magnetic field is almost homogeneous, which makes it possible to determine the orientation of a mobile device using a compass. In more complex environments like indoors, ferromagnetic materials cause distortions of the Earth’s magnetic field. A compass usually fails in such areas. However, these magnetic distortions are location dependent and therefore can be used for positioning. In this paper, we investigate the influence of elementary structures, in particular a sphere and a cylinder, on the achievable accuracy of magnetic positioning methods. In a first step, we analytically calculate the magnetic field around a sphere and a cylinder in an outer homogeneous magnetic field. Assuming a noisy magnetic field sensor, we investigate the achievable positioning accuracy when observing these resulting fields. For our analysis, we calculate the Cramér–Rao lower bound, which is a fundamental lower bound on the variance of an unbiased estimator. The results of our investigations show the dependency of the positioning error variance on the magnetic sensor properties, in particular the sensor noise variance and the material properties, i.e., the relative permeability of the sphere with respect to the cylinder and the location of the sensor relative to the sphere with respect to the cylinder. The insights provided in this work make it possible to evaluate experimental results from a theoretical perspective.
Open AccessCramér–Rao Lower Bound for Magnetic Field Localization around Elementary Structures
The determination of a mobile terminal’s position with high accuracy and ubiquitous coverage is still challenging. Global satellite navigation systems (GNSSs) provide sufficient accuracy in areas with a clear view to the sky. For GNSS-denied environments like indoors, complementary positioning technologies are required. A promising approach is to use the Earth’s magnetic field for positioning. In open areas, the Earth’s magnetic field is almost homogeneous, which makes it possible to determine the orientation of a mobile device using a compass. In more complex environments like indoors, ferromagnetic materials cause distortions of the Earth’s magnetic field. A compass usually fails in such areas. However, these magnetic distortions are location dependent and therefore can be used for positioning. In this paper, we investigate the influence of elementary structures, in particular a sphere and a cylinder, on the achievable accuracy of magnetic positioning methods. In a first step, we analytically calculate the magnetic field around a sphere and a cylinder in an outer homogeneous magnetic field. Assuming a noisy magnetic field sensor, we investigate the achievable positioning accuracy when observing these resulting fields. For our analysis, we calculate the Cramér–Rao lower bound, which is a fundamental lower bound on the variance of an unbiased estimator. The results of our investigations show the dependency of the positioning error variance on the magnetic sensor properties, in particular the sensor noise variance and the material properties, i.e., the relative permeability of the sphere with respect to the cylinder and the location of the sensor relative to the sphere with respect to the cylinder. The insights provided in this work make it possible to evaluate experimental results from a theoretical perspective.
- Open Access
- 27 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 23 (8) , 8168-8183
Empirical Fading Model and Bayesian Calibration for Multipath-Enhanced Device-Free Localization
Multipath-enhanced device-free localization (MDFL) systems determine presence and location of objects and users not necessarily equipped with localization devices. For localization, MDFL systems exploit user-induced changes in the power of all received signal components, including both line-of-sight and multipath components (MPCs). In this work, we therefore provide a statistical fading model that describes user-induced changes in received power specifically for MPCs. The model is derived and validated empirically using an extensive set of wideband and ultra-wideband measurement data. Since the localization performance of MDFL systems strongly depends on the information about the propagation paths within the wireless network, we further propose a Bayesian calibration approach that estimates the location of the reflection points of MPCs caused by single-bounce reflections. For MPCs caused by single-bounce reflections, the solution space of possible locations of reflection points is constrained to the delay ellipse, which allows the formulation of a computationally efficient one-dimensional estimation problem. Eventually, the problem is solved by sequential Bayesian estimation. The applicability of the proposed approach is demonstrated and evaluated using measurement data. Independent of the underlying measurement system, the Bayesian calibration approach is shown to robustly estimate the locations of the reflection points in different environments. Finally, the localization results of MDFL for an indoor scenario confirm the applicability of the Bayesian calibration approach.
- 27 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 23 (8) , 8168-8183
Open AccessEmpirical Fading Model and Bayesian Calibration for Multipath-Enhanced Device-Free Localization
Multipath-enhanced device-free localization (MDFL) systems determine presence and location of objects and users not necessarily equipped with localization devices. For localization, MDFL systems exploit user-induced changes in the power of all received signal components, including both line-of-sight and multipath components (MPCs). In this work, we therefore provide a statistical fading model that describes user-induced changes in received power specifically for MPCs. The model is derived and validated empirically using an extensive set of wideband and ultra-wideband measurement data. Since the localization performance of MDFL systems strongly depends on the information about the propagation paths within the wireless network, we further propose a Bayesian calibration approach that estimates the location of the reflection points of MPCs caused by single-bounce reflections. For MPCs caused by single-bounce reflections, the solution space of possible locations of reflection points is constrained to the delay ellipse, which allows the formulation of a computationally efficient one-dimensional estimation problem. Eventually, the problem is solved by sequential Bayesian estimation. The applicability of the proposed approach is demonstrated and evaluated using measurement data. Independent of the underlying measurement system, the Bayesian calibration approach is shown to robustly estimate the locations of the reflection points in different environments. Finally, the localization results of MDFL for an indoor scenario confirm the applicability of the Bayesian calibration approach.
- Open Access
- 23 February 2023
- Published by Institute of Navigation in NAVIGATION: Journal of the Institute of Navigation
- Vol. 70 (1)
Simultaneous Localization and Calibration (SLAC) Methods for a Train-Mounted Magnetometer
Magnetic field localization is based on the fact that the Earth’s magnetic field is distorted in the vicinity of ferromagnetic objects. When ferromagnetic objects are in fixed positions, the distortions are also fixed and, thus, contain location information. In our prior work, we proposed a simultaneous localization and calibration (SLAC) algorithm based on a Rao-Blackwellized particle filter that enables magnetic train localization using only uncalibrated magnetometer measurements. In this paper, a lower-complexity version of the SLAC algorithm is proposed that only estimates a subset of calibration parameters. An evaluation compares the full and reduced SLAC approach to a particle filter in which the magnetometer is pre-calibrated with a fixed set of parameters. The results show a clear advantage for both SLAC approaches and that the SLAC algorithm with a reduced set of calibration parameters achieves the same performance as the one with a full set of parameters.
- 23 February 2023
- Published by Institute of Navigation in NAVIGATION: Journal of the Institute of Navigation
- Vol. 70 (1)
Open AccessSimultaneous Localization and Calibration (SLAC) Methods for a Train-Mounted Magnetometer
Magnetic field localization is based on the fact that the Earth’s magnetic field is distorted in the vicinity of ferromagnetic objects. When ferromagnetic objects are in fixed positions, the distortions are also fixed and, thus, contain location information. In our prior work, we proposed a simultaneous localization and calibration (SLAC) algorithm based on a Rao-Blackwellized particle filter that enables magnetic train localization using only uncalibrated magnetometer measurements. In this paper, a lower-complexity version of the SLAC algorithm is proposed that only estimates a subset of calibration parameters. An evaluation compares the full and reduced SLAC approach to a particle filter in which the magnetometer is pre-calibrated with a fixed set of parameters. The results show a clear advantage for both SLAC approaches and that the SLAC algorithm with a reduced set of calibration parameters achieves the same performance as the one with a full set of parameters.
- Open Access
- 24 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Bayesian Cramer-Rao Lower Bound for Magnetic Field-based Localization
Magnetic field-based localization is a finger-printing technique using position-dependent distortions of the Earth magnetic field that enables localization in GNSS-denied areas like indoor environments. In addition, magnetic localization is passive and does not require dedicated devices in the infrastructure as it would be the case for comparable RF-based techniques. In this paper, we show how to analyze the achievable position accuracy of magnetic localization based on Bayesian Cramer-Rao lower bounds. The derivation of the bound requires an analytical model, e.g., a map or database, that links the position that is to be estimated to the corresponding magnetic field value. Unfortunately, finding an analytical model from the laws of physics in not feasible due to the complexity of the involved differential equations and the required knowledge about the environment. In this paper, we therefore use a Gaussian process (GP) that approximates the true analytical model based on training data. The GP ensures a smooth, differentiable likelihood and allows a strict Bayesian treatment of the estimation problem. Based on measurements in an indoor environment, the bound is evaluated for different sensor heights and is compared to the mean squared error of a particle filter. Furthermore, the bound is calculated for the case when only the magnetic magnitude is used for positioning and the case when the whole vector field is considered. For both cases, the resulting position bound is below 10 cm indicating an high potential accuracy of magnetic localization.
- 24 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessBayesian Cramer-Rao Lower Bound for Magnetic Field-based Localization
Magnetic field-based localization is a finger-printing technique using position-dependent distortions of the Earth magnetic field that enables localization in GNSS-denied areas like indoor environments. In addition, magnetic localization is passive and does not require dedicated devices in the infrastructure as it would be the case for comparable RF-based techniques. In this paper, we show how to analyze the achievable position accuracy of magnetic localization based on Bayesian Cramer-Rao lower bounds. The derivation of the bound requires an analytical model, e.g., a map or database, that links the position that is to be estimated to the corresponding magnetic field value. Unfortunately, finding an analytical model from the laws of physics in not feasible due to the complexity of the involved differential equations and the required knowledge about the environment. In this paper, we therefore use a Gaussian process (GP) that approximates the true analytical model based on training data. The GP ensures a smooth, differentiable likelihood and allows a strict Bayesian treatment of the estimation problem. Based on measurements in an indoor environment, the bound is evaluated for different sensor heights and is compared to the mean squared error of a particle filter. Furthermore, the bound is calculated for the case when only the magnetic magnitude is used for positioning and the case when the whole vector field is considered. For both cases, the resulting position bound is below 10 cm indicating an high potential accuracy of magnetic localization.
- Open Access
- 21 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 123080-123093
Bayesian Cramér-Rao Lower Bound for Magnetic Field-Based Localization
In this paper, we show how to analyze the achievable position accuracy of magnetic localization based on Bayesian Cramér-Rao lower bounds and how to account for deterministic inputs in the bound. The derivation of the bound requires an analytical model, e.g., a map or database, that links the position that is to be estimated to the corresponding magnetic field value. Unfortunately, finding an analytical model from the laws of physics in not feasible due to the complexity of the involved differential equations and the required knowledge about the environment. In this paper, we therefore use a Gaussian process (GP) that approximates the true analytical model based on training data. The GP ensures a smooth, differentiable likelihood and allows a strict Bayesian treatment of the estimation problem. Based on a novel set of measurements recorded in an indoor environment, the bound is evaluated for different sensor heights and is compared to the mean squared error of a particle filter. Furthermore, the bound is calculated for the case when only the magnetic magnitude is used for positioning and the case when the whole vector field is considered. For both cases, the resulting position bound is below 10 cm indicating an high potential accuracy of magnetic localization.
- 21 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 123080-123093
Open AccessBayesian Cramér-Rao Lower Bound for Magnetic Field-Based Localization
In this paper, we show how to analyze the achievable position accuracy of magnetic localization based on Bayesian Cramér-Rao lower bounds and how to account for deterministic inputs in the bound. The derivation of the bound requires an analytical model, e.g., a map or database, that links the position that is to be estimated to the corresponding magnetic field value. Unfortunately, finding an analytical model from the laws of physics in not feasible due to the complexity of the involved differential equations and the required knowledge about the environment. In this paper, we therefore use a Gaussian process (GP) that approximates the true analytical model based on training data. The GP ensures a smooth, differentiable likelihood and allows a strict Bayesian treatment of the estimation problem. Based on a novel set of measurements recorded in an indoor environment, the bound is evaluated for different sensor heights and is compared to the mean squared error of a particle filter. Furthermore, the bound is calculated for the case when only the magnetic magnitude is used for positioning and the case when the whole vector field is considered. For both cases, the resulting position bound is below 10 cm indicating an high potential accuracy of magnetic localization.
- Open Access
- 14 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. PP (1530437X) , 1
Localization with Magnetic Field Distortions and Simultaneous Magnetometer Calibration
Magnetic field localization utilizes position dependent and time persistent distortions of the earth magnetic field. These distortions are introduced by stationary ferromagnetic material in the environment and can be stored in a map to enable localization. Estimating the position of a magnetometer with these distortions requires a calibration of the sensor to enable the matching of the measurements to the map. Typically, the calibration is performed in a prior step and requires specific maneuvers like sensor rotations in a homogenous field. The goal of the maneuvers is to render the calibration parameters observable. For heavy platforms, e.g., cars, trains and driverless transport systems in factories, performing special maneuvers is cumbersome or even impossible. In addition they operate in an environment with an inhomogeneous magnetic field. To address this issue, this paper proposes a novel method that exploits the magnetic field distortions to render the calibration parameters observable. To simplify the calibration process, the calibration parameters are estimated simultaneously with the position of the platform. The method employs a Rao-Blackwellized particle filter that reduces the computational complexity and enables real time processing. The feasibility of the method is shown in an evaluation with measurements of a magnetometer mounted on a model train. The results show a high accuracy of the position and calibration parameter estimation.
- 14 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. PP (1530437X) , 1
Open AccessLocalization with Magnetic Field Distortions and Simultaneous Magnetometer Calibration
Magnetic field localization utilizes position dependent and time persistent distortions of the earth magnetic field. These distortions are introduced by stationary ferromagnetic material in the environment and can be stored in a map to enable localization. Estimating the position of a magnetometer with these distortions requires a calibration of the sensor to enable the matching of the measurements to the map. Typically, the calibration is performed in a prior step and requires specific maneuvers like sensor rotations in a homogenous field. The goal of the maneuvers is to render the calibration parameters observable. For heavy platforms, e.g., cars, trains and driverless transport systems in factories, performing special maneuvers is cumbersome or even impossible. In addition they operate in an environment with an inhomogeneous magnetic field. To address this issue, this paper proposes a novel method that exploits the magnetic field distortions to render the calibration parameters observable. To simplify the calibration process, the calibration parameters are estimated simultaneously with the position of the platform. The method employs a Rao-Blackwellized particle filter that reduces the computational complexity and enables real time processing. The feasibility of the method is shown in an evaluation with measurements of a magnetometer mounted on a model train. The results show a high accuracy of the position and calibration parameter estimation.
- Open Access
Localization and Tracking of Discrete Mobile Scatterers in Vehicular Environments Using Delay Estimates
This paper describes an approach to detect, localize, and track moving, non-cooperative objects by exploiting multipath propagation. In a network of spatially distributed transmitting and receiving nodes, moving objects appear as discrete mobile scatterers. Therefore, the localization of mobile scatterers is formulated as a nonlinear optimization problem. An iterative nonlinear least squares algorithm following Levenberg and Marquardt is used for solving the optimization problem initially, and an extended Kalman filter is used for estimating the scatterer location recursively over time. The corresponding performance bounds are derived for both the snapshot based position estimation and the nonlinear sequential Bayesian estimation with the classic and the posterior Cramér–Rao lower bound. Thereby, a comparison of simulation results to the posterior Cramér–Rao lower bound confirms the applicability of the extended Kalman filter. The proposed approach is applied to estimate the position of a walking pedestrian sequentially based on wideband measurement data in an outdoor scenario. The evaluation shows that the pedestrian can be localized throughout the scenario with an accuracy of m at 90% confidence.Open AccessLocalization and Tracking of Discrete Mobile Scatterers in Vehicular Environments Using Delay Estimates
This paper describes an approach to detect, localize, and track moving, non-cooperative objects by exploiting multipath propagation. In a network of spatially distributed transmitting and receiving nodes, moving objects appear as discrete mobile scatterers. Therefore, the localization of mobile scatterers is formulated as a nonlinear optimization problem. An iterative nonlinear least squares algorithm following Levenberg and Marquardt is used for solving the optimization problem initially, and an extended Kalman filter is used for estimating the scatterer location recursively over time. The corresponding performance bounds are derived for both the snapshot based position estimation and the nonlinear sequential Bayesian estimation with the classic and the posterior Cramér–Rao lower bound. Thereby, a comparison of simulation results to the posterior Cramér–Rao lower bound confirms the applicability of the extended Kalman filter. The proposed approach is applied to estimate the position of a walking pedestrian sequentially based on wideband measurement data in an outdoor scenario. The evaluation shows that the pedestrian can be localized throughout the scenario with an accuracy of m at 90% confidence.