Olaf Schwedler
Research Subjects
Research Interests
Olaf Schwedler has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
Niels Holtschke
Institute of Materials and Joining Technology, Otto-von-Guericke University Magdeburg, Magdeburg, Germany
2 shared publications- Sven Jüttner
Institute of Materials and Joining Technology, Otto-von-Guericke-University Magdeburg, Magdeburg, Germany
2 shared publications - Alexandros Charitos
TU Bergakademie Freiberg
1 shared publication - Lars Felkl
Institute for Nonferrous Metallurgy and Purest Materials (INEMET), TU Bergakademie Freiberg, Freiberg, Germany
1 shared publication Matthias Kuhlmann
Magdeburg , Germany
1 shared publication
Latest Publications
- Open Access
- 1 January 2023
- Published by TANGER Ltd.
- Vol. 2023, 549-554
Influence of the enrichment of natural gas with hydrogen on the hydrogen solubility of different copper qualities and the heat balance
- 1 January 2023
- Published by TANGER Ltd.
- Vol. 2023, 549-554
Open AccessInfluence of the enrichment of natural gas with hydrogen on the hydrogen solubility of different copper qualities and the heat balance
- 22 June 2016
- Published by Springer Nature in Welding in the World
- Vol. 60 (5) , 1063-1070
Hydrogen-assisted cold cracking in welded joints of press-hardened 22MnB5
- 22 June 2016
- Published by Springer Nature in Welding in the World
- Vol. 60 (5) , 1063-1070
Hydrogen-assisted cold cracking in welded joints of press-hardened 22MnB5
- 16 November 2015
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 57 (11-12) , 977-984
Consideration of hydrogen transport in press-hardened 22MnB5
The increasing use of hot stamped high strength steels like 22MnB5 (1.5528) for complex crash relevant structural components in the vehicle body, and the problem of hydrogen-assisted damage have gained increasing importance in the automotive industry. In the high strength category, hot stamped quenched and tempered steels (tensile strength up to 1600 MPa) are under unfavorable conditions for potential risk of hydrogen embrittlement, e. g., at elevated hydrogen input, in the presence of increased tensions, and in the further processing of these steels. Peculiarities of boron-alloyed quenched and tempered steel are coating systems that are applied to the steel substrate prior to hot stamping and they serve as a protection against scaling during austenitization. These coating systems, aluminum-silicon (+AS150) and zinc (+Z140) which are most commonly used, have significant influence on the diffusion and desorption of diffusible hydrogen in thin 22MnB5 sheets. The investigations of the hydrogen transport described in this paper are carried out by thermal desorption analysis (TDA). This measurement method allows the determination of activation energies and pre-exponential diffusion coefficients of hydrogen for the different coating variants of 22MnB5 by different temperature regimes (heating rates). Furthermore, the corresponding diffusion coefficients of the studied states are determined. Based on these results, an estimate of desorption is carried out, and then empirically tested by isothermal analyzes.
- 16 November 2015
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 57 (11-12) , 977-984
Consideration of hydrogen transport in press-hardened 22MnB5
The increasing use of hot stamped high strength steels like 22MnB5 (1.5528) for complex crash relevant structural components in the vehicle body, and the problem of hydrogen-assisted damage have gained increasing importance in the automotive industry. In the high strength category, hot stamped quenched and tempered steels (tensile strength up to 1600 MPa) are under unfavorable conditions for potential risk of hydrogen embrittlement, e. g., at elevated hydrogen input, in the presence of increased tensions, and in the further processing of these steels. Peculiarities of boron-alloyed quenched and tempered steel are coating systems that are applied to the steel substrate prior to hot stamping and they serve as a protection against scaling during austenitization. These coating systems, aluminum-silicon (+AS150) and zinc (+Z140) which are most commonly used, have significant influence on the diffusion and desorption of diffusible hydrogen in thin 22MnB5 sheets. The investigations of the hydrogen transport described in this paper are carried out by thermal desorption analysis (TDA). This measurement method allows the determination of activation energies and pre-exponential diffusion coefficients of hydrogen for the different coating variants of 22MnB5 by different temperature regimes (heating rates). Furthermore, the corresponding diffusion coefficients of the studied states are determined. Based on these results, an estimate of desorption is carried out, and then empirically tested by isothermal analyzes.