SKSinan Kul

Sinan Kul

*This is an algorithmically generated author record based on publicly available information.

Sinan Kul has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development of a Clinical Decision Support System Using Artificial Intelligence Methods for Liver Transplant Centers

    by Mete Yağanoğlu, Gürkan Öztürk, Ferhat Bozkurt, Zeynep Bilen, Zühal Yetiş Demir, Sinan Kul, Emrah Şimşek, Salih Kara, Hakan Eygu, Necip Altundaş, et al.

    The objective of this study is to utilize artificial intelligence techniques for the diagnosis of complications and diseases that may arise after liver transplantation, as well as for the identification of patients in need of transplantation. To achieve this, an interface was developed to collect patient information from Atatürk University Research Hospital, specifically focusing on individuals who have undergone liver transplantation. The collected data were subsequently entered into a comprehensive database. Additionally, relevant patient information was obtained through the hospital’s information processing system, which was used to create a data pool. The classification of data was based on four dependent variables, namely, the presence or absence of death (“exitus”), recurrence location, tumor recurrence, and cause of death. Techniques such as Principal Component Analysis and Linear Discriminant Analysis (LDA) were employed to enhance the performance of the models. Among the various methods employed, the LDA method consistently yielded superior results in terms of accuracy during k-fold cross-validation. Following k-fold cross-validation, the model achieved the highest accuracy of 98% for the dependent variable “exitus”. For the dependent variable “recurrence location”, the highest accuracy obtained after k-fold cross-validation was 91%. Furthermore, the highest accuracy of 99% was achieved for both the dependent variables “tumor recurrence” and “cause of death” after k-fold cross-validation.


  • L Tipi Matris ve Fine-Kinney Metodları Kullanılarak Erzurum Havalimanı’nın Çevresel Risk Değerlendirmesi

    by Ferdin Bedir, Sinan Kul, Mustafa Özdemir, Şahset İrdemez

    Dünya ekonomisinde önemli bir yeri olan havacılık sektörü diğer birçok sektör ile karşılaştırıldığında çok daha yüksek bir büyüme oranına sahiptir. Günümüzde küresel sera gazı emisyonlarının yaklaşık %2'sinin bu sektörden kaynaklandığı ve ilerleyen yıllarda bu emisyonların sektörün büyüme oranları ile paralel olarak artacağı düşünülerek gerekli tedbirlerin vakit kaybetmeden alınması yerinde olacaktır. Havalimanlarının inşaat faaliyetleri süresince ekosistem olumsuz olarak etkilenirken, havalimanı altyapılarının yüksek enerji ihtiyaçları, işletme aşamasında oluşan önemli miktarlardaki atık maddeler, havalimanı operasyonlarından kaynaklanan gürültü emisyonları vb. nedenler yerel halkın refahını önemli ölçüde etkileyebilmektedir. Havalimanlarında yürütülen uygulamaların çevreyi ve yerel halkı etkilediği göz önünde bulundurulduğunda, ekonomik gerekçeleri bahane etmeden havalimanlarının yönetimleri tarafından düzeltici önlemlerin uygulamaya alınması gerekmektedir. Bu çalışmada bahsi geçen çevresel problemler değerlendirilerek, Erzurum Havalimanı’nın işletilmesi sürecinde, risk değerlendirmesi yapılması ve çevresel etkilerinin belirlenmesi amaçlanmaktadır. Çalışmada çevresel risk faktörleri belirlenerek, risklerin çevreye olası etkileri L tipi matris metodu ve Fine-Kinney metodu kullanılarak ortaya konulmaya çalışılmıştır. Bu doğrultuda havalimanı bünyesinde yer alan ofis, mutfak, marangozhane, depo, bakım onarım vb. birimlerde çevresel zararlara sebep olabileceği düşünülen çevresel risk etmenleri değerlendirilmiştir. Havalimanında yapılan değerlendirmeler sonucunda L tipi matris metoduyla 11 adet orta, 243 adet katlanılabilir ve 39 adet önemsiz düzey risk tespit edilmişken, Fine-Kinney metoduyla 7 adet yüksek, 31 adet önemli, 136 olası ve 119 adet önemsiz düzey çevresel risk tespit edilmiştir. Alınacak önlemlerin, havalimanının muhtemel çevresel etkilerini büyük ölçüde düşüreceğini göstermektedir.


  • Design and validation of IoT based smart classroom

    by Mete Yağanoğlu, Ferhat Bozkurt, F. Baturalp Günay, Sinan Kul, Emrah Şimşek, Gökhan Öztürk, Selçuk Karaman


  • Investigation of the Treatment of Olive Mill Wastewater by Electrooxidation

    by Sinan Kul, Recep Boncukcuoğlu, Fatma Ekmekyapar Torun, Züleyha Reçber, Onur Sözüdoğru, Erdinç Aladağ


  • Open Access

    Comparison of Bomaplex Blue CR-L Removal by Adsorption Using Raw and Activated Pumpkin Seed Shells

    by Şahset İrDemez, Gizem Özyay, Fatma Ekmekyapar Torun, Sinan Kul, Züleyha Bingül

    In this study, removal of colour from wastewaters prepared synthetically using Bomaplex Blue CR-L was investigated using raw and activated pumpkin seed shells by adsorption in a batch system. The effects of stirring speed, adsorbent concentration, dye concentration, temperature and pH on colour removal were investigated, and adsorption capacities of raw and activated pumpkin seed shells were determined. In addition, adsorption kinetics, isotherm coefficients, activation energies and thermodynamic parameters were calculated. The optimal adsorption conditions were determined as pH = 2, stirring speed of 200 rpm, adsorbent concentration of 10 g L −1 and 30 °C. Under the optimal conditions, the maximum removal efficiency of Bomaplex Blue CR-L using raw pumpkin seed shells was 73.01 %. This value rose to 79.71 % after activation processing was applied. Experimental adsorption data show that the adsorption is more suited to the Langmuir adsorption model and works in accordance with the pseudo-first-order kinetics model. As a result of thermodynamic research, ΔH° and ΔS° were 31.515 kJ mol −1 and 109.952 kJ mol −1 K −1 for the raw adsorbent, respectively. For the activated adsorbent, Δ H ° and Δ S ° were 43.118 kJ mol −1 and 152.237 kJ mol −1 K −1 , respectively. The activation energy of adsorption was calculated as 10.918 kJ mol −1 for the raw adsorbent and 9.882 kJ mol −1 for the activated adsorbent.


  • Investigation of the biological treatability of pistachio processing industry wastewaters in a batch-operated aerobic bioreactor

    by Sevtap Tırınk, Alper Nuhoğlu, Sinan Kul

    This study encompasses investigation of treatment of pistachio processing industry wastewaters in a batch reactor under aerobic conditions, calculation of kinetic parameters and comparison of different inhibition models. The mixed microorganism culture used in the study was adapted to pistachio processing industry wastewaters for nearly one month and then concentrations from 50 to 1000 mg L−1 of pistachio processing industry wastewaters were added to the medium and treatment was investigated in batch experiments. The Andrews, Han-Levenspiel, Luong and Aiba biokinetic equations were chosen for the correlations between the concentration of pistachio processing industry wastewaters and specific growth rates, and the kinetic parameters in these biokinetic equations were calculated. The maximum specific growh rate, semi-saturated constant and inhibition constant parameters, included in the Aiba biokinetic equation providing best fit among the other equations, had values calculated as 0.25 h−1, 19 mg L−1, and 516 mg L−1, respectively. The substrate value reaches maximum value and the specific growth rate at this concentration were calculated as 101.379 mg L−1 and 0.1827 h−1, respectively. Graphical abstract


  • Open Access

    Investigation of the Biological Treatability of Pistachio Processing Industry Wastewaters in a Batch-operated Aerobic Bioreactor

    by Sinan Kul, Sevtap Tırınk, Alper Nuhoğlu

    This study encompasses investigation of treatment of pistachio processing industry wastewaters in a batch reactor under aerobic conditions, calculation of kinetic parameters and comparison of different inhibition models. The mixed microorganism culture used in the study was adapted to pistachio processing industry wastewaters for nearly one month and then concentrations from 50-1000 mg L -1 of pistachio processing industry wastewaters were added to the medium and treatment was investigated in batch experiments. The Andrews, Han-Levenspiel, Luong and Aiba biokinetic equations were chosen for the correlations between the concentration of pistachio processing industry wastewaters and specific growth rates, and the kinetic parameters in these biokinetic equations were calculated. The maximum specific growh rate, semi-saturated constant and inhibition constant parameters, included in the Aiba biokinetic equation providing best fit among the other equations, had values calculated as 0.25 h -1 , 19 mg L -1 , and 516 mg L -1 , respectively. The substrat value reaches maximum value and the specific growth rate at this concentration were calculated as 101.379 mg L -1 and 0.1827 h -1 , respectively

  • Open Access

    Investigation of the effect of current density and PH on oil and grease removal from leather industry wastewaters by electrocoagulation method

    by Züleyha Bi̇ngül Reçber, Fatma Ekmekyapar Torun, Sinan Kul, Şahset İrdemez

    In this study, the effects of pH and current density on the removal of high concentrations of oil and grease in leather industry wastewater by the electrocoagulation method were investigated. Two different types of electrodes were used in the study. Studies with aluminum electrodes have shown that these electrodes are more effective than iron electrodes in removing oil and grease. In addition, aluminum electrodes are affected more by the system pH than iron electrodes. Studies have shown that higher oil and grease removal efficiencies are obtained below pH 4 for both electrodes. While the oil and grease removal efficiency with Al electrodes is 95% at pH 2, this value decreases to 83% at pH 6. In Fe electrodes, while the removal efficiency is 87.83% at pH 2, it decreases to 83% at pH 6. The effect of current density on oil and grease removal was examined and it was observed that the removal efficiency remained constant above a certain current density in aluminum electrodes. While the efficiency of Al electrodes is 83.31% at 0.6 mA cm-2 current density, this value has increased to about 98% at 1.2, 1.8, and 2.4 mA cm-2 current densities. In Fe electrodes, the oil and grease removal efficiency is 82.66% at 0.6 mA cm-2 current density, while it is 90% at 1.2 and 1.8 mA cm-2 current densities and 98% at 2.4 mA cm-2. These results show that the electrocoagulation process removes the oil and grease in wastewater at a high rate. This shows that this process can also be used as pre-treatment before the biological treatment of industrial wastewater with high oil and grease content.

  • Open Access

    A student-based central exam scheduling model using A* algorithm

    by Mehmet Sinan Başar, Sinan Kul

    In this study, a student-based placement model using the A* algorithm is proposed and applied to solve the problem of placing the courses in exam sessions. The application area of the model is midterm and final exams, conducted by the Open Education Faculty. The reason for choosing open education exams for the practice is that the exams are applied across the country and more than 100,000 students participate. The main problem is to obtain a suitable distribution that can satisfy many constraints simultaneously. In the current system, the lessons in the sessions were placed once using the curriculum knowledge. This placement plan is applied in all exams. When the placement is done according to the curriculum information, the courses in the sessions cannot be placed effectively and efficiently due to a large number of common courses and the large number of students taking the exam. This makes the booklets more expensive and the organization more prone to errors. Both the opening of new programs and the increase in the number of students regularly lead to the necessity of placing the classes in sessions dynamically each semester. In addition, to prevent conflicts with the calendars of other central exams, it is necessary to conduct all exams in three sessions. A better solution was obtained by using a different model than the currently used model in the study. With this solution, distribution of the courses of successful students with few courses to all sessions is provided, and difficult courses of unsuccessful students who have a large number of courses were gathered in the same session. This study can support future studies on two issues: the first issue is the approach of using the course that will be taken by most students instead of the courses taught in most departments in the selection of the course to be placed in the booklet. The second issue is to try to find the most suitable solution by performing performance tests on many algorithms whose performance has been determined by many academic studies.