SMSascha Müller

Sascha Müller

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sascha Müller has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Enhanced mobility and dynamic retention of nanoplastics in mineral coated porous media.

    by Sascha Müller, Tim Haberschek, Mateusz Kasztelan, Edith Hammer

    This study examines the transport and retention of carboxylated and amine-modified polystyrene nanoparticles (NP) in quartz-, kaolinite-, and goethite-coated sands under saturated flow. Column experiments at varying flow velocities (1- 50 m d⁻¹), supported by adsorption kinetics, (X)-DLVO modeling, hydrodynamic torque analysis, and advection-dispersion modeling (ADE), were used to identify controlling factors of NP mobility.Increasing flow velocity enhanced NP breakthrough and shifted deposition zones further along the column length, indicating a transition from diffusion- to reaction-limited attachment. Deposition followed the order goethite > kaolinite > quartz. Despite similar surface charge, carboxylated polystyrene NP showed unexpectedly strong retention on kaolinite, attributed to hydrogen bonding between carboxyl and kaolinite hydroxyl groups, as indicated by IR spectroscopy, an interaction not captured by DLVO theory. Force tensiometry showed variations in contact angles between various mineral coatings, yet no evidence for earlier proposed “long range” hydrophobic forces between NP and macroscopic surfaces could be found from Peak Force QNM measurements. ADE simulations incorporating reversible attachment-detachment and site blocking best reproduced observations, highlighting the combined roles of hydrodynamics and mineral surface chemistry. The modelling exercise further suggests that the low density of polymeric nanoparticles limits gravitational settling, challenging the transferability of trends established for denser mineral engineered nanoparticles (ENPs) such as silica.Overall, the results demonstrate greater NP mobility and more dynamic retention in natural, heterogeneous flow systems than inferred from DLVO interactions, as supported by experiments and kinetic ADE modeling.

  • Open Access

    Nanoplastic- Fungi interaction – insights from various laboratory scales

    by Sascha Müller, Hanbang Zou, Martin Lundqvist, Tommy Cedervall, Micaela Mafla Endara, Edith Hammer

    Nanoplastic (NP) exposure to the terrestrial water cycle poses an emerging threat to subsurface ecosystems, while the continuous release of NP increases the risk of drinking water contamination.Fungal communities are a crucial component of terrestrial ecosystems. Traditionally, their presence and functions have been studied in shallow soils as part of the soil microbiome or above ground as decomposers or pathogens. Recent mycobiome screening studies of groundwater wells have revealed the presence of fungal species in deeper aquifers. This confirms the presence of fungi across all compartments of the terrestrial water cycle, highlighting the need to investigate their role in contaminant transport processes.Fungi have demonstrated the ability to immobilize dissolved organic contaminants, heavy metals, and pharmaceuticals from polluted waters. However, studies examining their effect on NP removal remain limited. Existing research generally lacks the integration of liquid flow dynamics, which is crucial for understanding fungal interactions in natural water systems.We present a dataset, which shows dynamics of NP-fungi interaction across multiple laboratory scales. Our study compares batch adsorption experiments with transport experiments conducted in inoculated microfluidic chips and transport columns. Carboxylated polystyrene nanoparticles of 100 nm and 250 nm serve as model NPs. Following fungal inoculation in growth media, the experiments are conducted under various ion concentrations of CaCl and flow velocities ranging from 1 m/d and 30 m/d.Our results indicate scale-dependent modes of NP-fungal interactions. In batch-scale experiments, higher ion concentrations significantly enhance the adsorption efficiency of NPs to fungal hyphae. In contrast, experiments conducted in microfluidic chips and transport columns reveal altered behavior, with notably lower adsorption efficiencies observed.This suggests that in natural environments, factors such as the spatial distribution of hyphae, ion concentration, flow rates, and consequently reaction times, collectively influence the efficiency of NP removal by fungal communities.

  • Open Access

    The WITS software toolbox – Water Isotope modelling for Transit time and Storage

    by Stefanie Lutz, Julien Farlin, Alicia Correa, Sascha Mueller, Michael Stockinger

    In recent years, there has been a significant shift in the modelling approaches used for estimating transit times in hydrological systems. While classical lumped parameter models (LPM) have long been the standard, StorAge Selection functions (SAS-functions) have gained considerable popularity. However, a tool facilitating the use and comparison of both approaches is still lacking.The WITS toolbox, developed as part of the COST Action WATSON, offers a unique opportunity to explore and compare both methodologies. WITS is an R-based software tool catering to both experienced researchers and newcomers to the field of transit-time modelling. It allows estimating storage volumes and dynamics, and transit times in various systems, including lysimeters, groundwater and catchments through the application of input-output modelling with environmental tracers (i.e., tritium, deuterium, and oxygen-18).WITS includes a comprehensive manual guiding through the software's functionalities and modelling processes and comes with multiple case studies that demonstrate practical applications of the software in different hydrological settings.WITS allows users to explore and compare transit-time methodologies, advancing research in hydrology and fostering a deeper understanding of water system behaviors.

  • Open Access

    Investigating the deposition behavior of different polystyrene nanoplastics onto mineral surfaces using QCM-D

    by Sascha Müller, Edith Hammer, Tommy Cedervall, Nathalie Tufenkji

    Nanoplastic, as primary or secondary plastics, emerges as a contaminant across all environmental compartments. In terrestrial settings, the vadose zone is considered a plastic sink. Yet, leaching into deeper saturated subsurface areas and groundwater may occur via preferential flow paths, changing hydro-chemical conditions, or direct infiltration in low lying or recharge areas. Understanding transport and deposition behavior of nanoplastics in aquifer settings is crucial as it i) is expected to deviate from that of engineered nanoparticles (ENPs) due to its more complex physical and chemical properties, and ii) to be able to develop and inform numerical models to upscale nanoplastic contaminant transport when e.g., exploring groundwater resources. Quartz-crystal microbalance with dissipation monitoring (QCM-D) was used to investigate the deposition behavior of various model polystyrene nanoparticles onto two of the most abundant mineral species on Earth: quartz and kaolinite under various chemical settings.Three types of polystyrene of ~ 100 nm were used herein: A non-functionalized spherical polystyrene (PLAIN), a spherical carboxyl functionalized polystyrene (CARBO) and a hexagonal secondary polystyrene (GRIND) produced by mechanical grinding of larger polystyrene beads. Furthermore, divalent ion concentrations in terrestrial environments are inducing larger effects on nanoplastic processes than monovalent ions and therefore only the effect of increasing Ca2+ concentration in solution was tested. Moreover, natural organic matter (NOM) in terrestrial environments is usually degraded with depth, thus its presence in saturated groundwater can be negligible, yet to consider even low concentrations, we also tested the effect of technical grade humic acid as a model NOM. We found that deposition behavior differs between various particles and mineral surfaces as well as with Ca2+ concentration. For quartz surfaces, non-spherical particles showed the highest deposition rates, while with the increasing mineral complexity (kaolinite), this effect diminished, and other factors gained more importance. Kaolinite surfaces showed the highest deposition rates among all particle types. This suggests the involvement of surface charge driven processes, where positive Al-OH sites of the kaolinite more effectively attract negatively charged nanoplastics as compared to negatively charged quartz. Increasing the ionic strength increased the deposition behavior until a peak deposition observed at 15 mM Ca2+ due to a gradual charge decrease of particles and minerals. Beyond 15 mM, deposition decreases as a result of reduced particle stability, and consequently lowered convective-diffusive transport to the mineral surface. Surprisingly, highly carboxylated CARBO particles showed a large increase in deposition on kaolinite irrespective of Ca2+ concentration. This may be explained by the importance of Al-OH sites, which bind -COOH groups more effectively than Si-O sites. Adding 1mg/L humic acid at 15 mM Ca2+ reduced the deposition behavior significantly at both mineral surfaces. Our results highlight important processes between nanoplastics and mineral surfaces and thereby also important impacts in understanding nanoplastic transport in subsurface terrestrial environments. Charge driven processes dominate in simple mineral settings (quartz), while with increasing mineral complexity, chemical processes and specific ion binding interactions will dominate nanoplastic deposition and transport.

  • Open Access

    Nanoplastic transport in aqueous environments: The role of chemo-electric properties and hydrodynamic forces for nanoplastic-mineral interaction.

    by Sascha Müller, Jacek Fiutowski, Horst-Günter Rubahn, Nicole Rita Posth

    The fate and transport characteristics of nanoplastic (NP) through different environmental systems is largely governed by physio-chemical processes and their specific interaction with environmental constituents (i.e., minerals, dissolved species, suspended particles). A hydrodynamic component present in almost all terrestrial and marine aqueous environments impact the physio-chemical processes micron-scale is largely overlooked in NP transport studies. Therefore, we tested the interaction behavior of nanosized plastic polystyrene particles of various coatings in the presence of minerals abundant in the Earth crust within a hydrodynamic continuum representing flow rates from groundwater to surface water systems. Our batch experiments show that particle-mineral adsorption is largely driven by the magnitude of opposite charge configurations, which is either produced by mineral type or specific nanoplastic surface coating. Zetapotential serves as a good predictor of adsorption between uncoated and carboxyl-coated polystyrene with minerals. It fails, however, to predict adsorption behavior between NH2 coated polystyrene and apatite or feldspars, due to the more complex and varying compositions of these minerals. Incorporating the hydrodynamic force component into the particle- mineral interaction scheme reproduces those adsorption trends at slow flowrates of 1e-04 m/d. However, increasing flow rates by a factor of 100 modifies charge-driven adsorption between minerals and plastics. This study highlights the unabating importance of hydrodynamic conditions when predicting nanoplastic transport in different subsurface environments, and has implications for nanoplastic behavior in both terrestrial and marine aqueous environments.

  • Open Access

    The influence of biofilms and mineral loading on marine plastic fate

    by Nicole Rita Posth, Joan Antoni Carreres Calabuig, Sascha Mueller, Kelsey Rogers, Nynke Keulen

    Plastic pollution is a global concern and potential marker of the Anthropocene, yet controls on the environmental fate of this contaminant remain underexplored. Synthetic polymers emitted to aquatic systems undergo chemical, physical and biological forces that affect their weathering, aggregation, degradation, leaching, transport and burial. In the aquatic environment, plastic surfaces attract both biological and mineralogical loading. The presence of biofilm on marine plastics suggests a significant microbial role in the fate of plastic in this new ecological niche, called the Plastisphere. Microorganisms may influence degradation, transport and burial of plastic in the sediment, but also plastic´s incorporation into biogeochemical cycles. Likewise, mineral crystallization on plastic surfaces (i.e., phosphate, iron – rich) induced by microbial processes or formed abiotically may play an important role in plastic aggregation, transport, degradation and burial of meso- to nanoscale size plastics. Here, we present our current field and laboratory investigations of biological and mineralogical loading of plastics in various geochemical settings. We combine bioimaging (He-ion microscopy (HIM), Scanning Electron Microscopy-Energy Dispersive X-Ray Spectroscopy (SEM-EDS), microbial community and eco-physiology studies, as well as elemental analysis to test mechanisms of loading on plastics, aggregation, transport, and potential impact on element cycling. Results of an on-going in situ study of polystyrene (PS), polyethylene (PE), marine paint, and wood exposed in Svanemøllen Harbor, Copenhagen and laboratory experiments are described. We explore whether surface characteristics and biogeochemical setting are important drivers for the development of mineral-rich biofilm and the role of these mineral-microbe associations in the fate of plastics.

  • Open Access

    Transport of Nanoplastic under groundwater aquifer flow and transport conditions

    by Sascha Müller, Tonci Balic-Zunic, Nicole R. Posth

    In terrestrial environments soils are hypothesized sinks for plastic particles. Nonetheless, due to the existence of preferential flow paths as well as a variety of geochemical and microbiological processes, this sink may only be temporary. A vertical translocation from soils to groundwater aquifers eventually occurs along different pathways. In these conditions Nanoplastic transport characteristics are similar to colloidal transport behavior. Therby the magnitude of plastic transport is eventually governed by complex interplay between the particle with its surrounding media (particle-particle, particle-solvent, particle- porous media) masked by different hydro-geochemical and microbiological conditions. The physical entrapment of particles (straining) may be significant when the particle diameter exceeds 5% of the median grain size diameter. Below that size additional electrostatic, van der Waals or steric interaction become increasingly important. We present a preliminary dataset on the interaction between Nano-sized Polystyrene (PS) with different surface coatings and a variety of common minerals occurring in groundwater aquifers under the presence of Natural Organic Matter (NOM). The reference aquifer material is based on the Danish subsurface structure of Quaternary and Miocene aquifer material, e.g. quartz, calcite and pyrite among others. In our study, batch scale interactions are up-scaled in column flow and transport experiments, simulating different groundwater aquifer flow conditions in the presence of selected minerals and NOM. This aims to clarify transport behavior of plastic pollutant in the subsurface environment. Furthermore, it serves as guide in qualitatively assessing and quantifying the vulnerability of groundwater aquifers to Nanoplastic pollution.

  • Open Access

    The effect of sediment thermal conductivity on vertical groundwater flux estimates

    by Eva Sebok, Sascha Müller

    Vertical sediment temperature profiles are frequently used to estimate vertical fluid fluxes. In these applications using heat as a tracer of groundwater flow, the thermal conductivity of saturated sediments (ke) is often given as a standard literature value and assumed to have a homogeneous distribution in the vertical space. In this study vertical sediment temperature profiles were collected in both a high-flux stream and a low-flux lagoon environment in sand- and peat-covered areas. ke was measured at the location of each temperature profile at several depths below the sediment–water interface up to 0.5 m with a measurement spacing of 0.1 m. In general ke values measured in this study ranged between 0.55 and 2.96 W m−1 ∘C−1 with an increase with depth from the sediment–water interface. The effect of using a vertically homogeneous or heterogeneous distribution of measured ke values on vertical flux estimates was studied with a steady-state HydroGeoSphere model. In the high-flux stream environment estimated fluxes varied between 0.03 and 0.71 m d−1 and in the low-flux lagoon between 0.02 and 0.23 m d−1. We found that using a vertically heterogeneous distribution of sediment thermal conductivity did not considerably change the fit between observed and simulated temperature data compared to a homogeneous distribution of ke. However, depending on the choice of sediment thermal conductivities, flux estimates decreased by up to 64 % or increased by up to 75 % compared to using a standard ke sediment thermal conductivity for sand, frequently assumed by previous local studies. Hence, our study emphasizes the importance of using spatially distributed thermal properties in heat flux applications in order to obtain more precise flux estimates.


  • Open Access

    The effect of sediment thermal conductivity on vertical groundwater flux estimates

    by Eva Sebok, Sascha Müller

    Vertical sediment temperature profiles are frequently used to estimate vertical fluid fluxes. In these applications using heat as a tracer of groundwater flow, the thermal conductivity of saturated sediments (ke) is often given as a standard literature value and assumed to have a homogeneous distribution in the vertical space. In this study vertical sediment temperature profiles were collected both in a high-flux stream and a low-flux lagoon environment in a sand-, and peat-covered area. ke was measured at the location of each temperature profile at several depths below the sediment-water interface up to 0.5 m with a measurement spacing of 0.1 m. In general ke values measured in this study ranged between 0.55 and 2.96 W m−1 °C−1 with an increase with depth from the sediment-water interface. The effect of using a vertically homogeneous or heterogeneous distribution of measured ke values on vertical flux estimates was studied with a steady-state HydroGeoSphere model. In the high-flux stream environment estimated fluxes varied between 0.03 and 0.71 m d−1 and in the low-flux lagoon between 0.02 and 0.23 m d−1. It was found, that using a vertically heterogeneous distribution of sediment thermal conductivity did not considerably change the fit between observed and simulated temperature data compared to a homogeneous distribution of ke. However, depending on the choice of sediment thermal conductivities, flux estimates decreased by up to 64 % or increased by up to 75 % compared to using a standard ke sediment thermal conductivity for sand, frequently assumed by previous local studies. Hence, our study emphasizes the importance of using spatially distributed thermal properties in heat flux applications in order to obtain more precise flux estimates.


  • Spatiotemporal variation of stable isotopic composition in precipitation: Post‐condensational effects in a humid area

    by Sascha Müller, Christine Stumpp, Jens Havskov Sørensen, Jens Havskov, Søren Jessen

    In the present study, a 2‐year dataset on δ18O and δ2H in precipitation is used to investigate hydrometeorologic controls on the isotopic compositions in a temperate maritime climate. Data was collected in Denmark along a transect of Six sampling stations across a landscape with a small topographic gradient and predominant westerly winds. Data showed the local meteoric water line for this region is expressed by the equation δ2H = 7.4δ18O + 5.4‰. A significant trend correlating enriched isotopic values to humidities around 70% during dry season and more depleted isotopic values to humidities around 90% during wet season was derived from the dataset. Temperature was found to only influence the isotopic composition in a secondary way, whereas no significant relationship was obtained for precipitation amount and evapotranspiration. It is suggested that subcloud post‐condensation exchange strongly influences the isotopic composition at the study site. A simple model of evaporation on falling rain was applied with the aim to reproduce observational data and show the potential influence of changing humidity conditions on precipitation compositions. The rather simple model approach did not fully explain the observational data, but it highlights the drastic isotopic changes from a falling raindrop that potentially can occur due to its release into a dryer atmosphere. This study shows that regional conditions and especially humidity can alter the isotopic composition in precipitation substantially even in regions without major topographic and hydrometeorologic gradients.