Kurt Dietliker
Kurt Dietliker has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
Georg Gescheidt
Institute of Physical and Theoretical Chemistry, Graz University of Technology, Technikerstrasse 4/I, A‐8010 Graz
5 shared publicationsGünther Rist
Institute of Physical and Theoretical Chemistry, Graz University of Technology, Technikerstrasse 4, A-8010 Graz, Austria; Department of Chemistry, Physical Chemistry, University of Basel, Klingelbergstrasse 80, 4056 Basel, Switzerland; Ciba Specialty Chemicals Inc., 4002 Basel, Switzerland; and Institute of Experimental Physics, Free University of Berlin, Arnimallee 14, 14195 Berlin, Germany
5 shared publicationsJean-Pierre Wolf
Institute of Physical and Theoretical Chemistry, Graz University of Technology, Technikerstrasse 4, A-8010 Graz, Austria; Department of Chemistry, Physical Chemistry, University of Basel, Klingelbergstrasse 80, 4056 Basel, Switzerland; Ciba Specialty Chemicals Inc., 4002 Basel, Switzerland; and Institute of Experimental Physics, Free University of Berlin, Arnimallee 14, 14195 Berlin, Germany
4 shared publications- Annalisa Chiappone
Dipartimento di Scienze Chimiche e Geologiche, Università Degli Studi di Cagliari, Via Università 40, 09124 Cagliari, Italy
3 shared publications Dmytro Neshchadin
Institut für Physikalische und Theoretische Chemie, Technische Universität Graz, Technikerstraße, 4/I, 8010 Graz (Österreich)
3 shared publications- Hansjörg Grützmacher
LIFM, IGCME, School of Chemistry, Sun Yat-Sen University, Guangzhou 510006, China
3 shared publications
Latest Publications
- 16 February 2022
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 13 (9) , 1151
Introduction to the themed collection on photopolymer science dedicated to Ewa Andrezejewska
Kurt Dietliker, Robert Liska and Marco Sangermano introduce the Polymer Chemistry themed collection on photopolymer science dedicated to Ewa Andrezejewska.
- 16 February 2022
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 13 (9) , 1151
Introduction to the themed collection on photopolymer science dedicated to Ewa Andrezejewska
Kurt Dietliker, Robert Liska and Marco Sangermano introduce the Polymer Chemistry themed collection on photopolymer science dedicated to Ewa Andrezejewska.
- 11 February 2022
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 13 (9) , 1169-1176
Streamlined concept towards spatially resolved photoactivation of dynamic transesterification in vitrimeric polymers by applying thermally stable photolatent bases
Through a well-targeted design, vitrimers are able to reorganise their three-dimensional covalently crosslinked network structure by associative exchange reactions when the so-called topology freezing transition temperature (Tv) is exceeded. Although in the past decade a vast number of vitrimers have been developed, there is only a very limited number of elaborate strategies for enabling a controlled and spatially resolved onset of the exchange reactions above Tv. Herein, we describe a convenient approach for a locally controllable photoactivation of vitrimeric properties in a covalently crosslinked thiol–epoxy network by the UV-mediated release of a strong amidine base acting as an efficient transesterification catalyst. In contrast to previous work, the applied photolatent catalysts benefit from superior solubility properties, adequate curing characteristics in the non-activated state (the addition of a supplementary catalyst is not required) and an excellent thermal stability. The spatially controlled activation of vitrimeric properties in terms of dynamic transesterification, macroscopically visible as a viscoelastic flow, is demonstrated by stress relaxation studies and a reshaping experiment. Moreover, we confirm that an undesired purely thermally induced catalyst release can be entirely excluded.
- 11 February 2022
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 13 (9) , 1169-1176
Streamlined concept towards spatially resolved photoactivation of dynamic transesterification in vitrimeric polymers by applying thermally stable photolatent bases
Through a well-targeted design, vitrimers are able to reorganise their three-dimensional covalently crosslinked network structure by associative exchange reactions when the so-called topology freezing transition temperature (Tv) is exceeded. Although in the past decade a vast number of vitrimers have been developed, there is only a very limited number of elaborate strategies for enabling a controlled and spatially resolved onset of the exchange reactions above Tv. Herein, we describe a convenient approach for a locally controllable photoactivation of vitrimeric properties in a covalently crosslinked thiol–epoxy network by the UV-mediated release of a strong amidine base acting as an efficient transesterification catalyst. In contrast to previous work, the applied photolatent catalysts benefit from superior solubility properties, adequate curing characteristics in the non-activated state (the addition of a supplementary catalyst is not required) and an excellent thermal stability. The spatially controlled activation of vitrimeric properties in terms of dynamic transesterification, macroscopically visible as a viscoelastic flow, is demonstrated by stress relaxation studies and a reshaping experiment. Moreover, we confirm that an undesired purely thermally induced catalyst release can be entirely excluded.
- Open Access
- 29 September 2021
- Published by PAGEPress Publications in Biomedical Science and Engineering
- Vol. 4 (s1)
Light-based 3D printing of functional polydimethylsiloxane- based microfluidic chips
The objective of the work is to fabricate and functionalize 3D printed PDMS-based microfluidic chips through digital light processing DLP-3D printing.
- 29 September 2021
- Published by PAGEPress Publications in Biomedical Science and Engineering
- Vol. 4 (s1)
Open AccessLight-based 3D printing of functional polydimethylsiloxane- based microfluidic chips
The objective of the work is to fabricate and functionalize 3D printed PDMS-based microfluidic chips through digital light processing DLP-3D printing.
- 2 January 2020
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 11 (7) , 1356-1363
Cleavable coumarin-based oxime esters with terminal heterocyclic moieties: photobleachable initiators for deep photocuring under visible LED light irradiation
Development of efficient unimolecular visible light photoinitiators (PIs) with photobleaching capabilities, which is essential for various biomedical applications and photopolymerization of thick materials, remains an emerging challenge. Based on the photochemistry of heteroaromatic compounds, unimolecular visible light oxime ester PIs (2-O, 2-S, 3-O, and 3-S), which contain coumarin derivatives as visible light chromophores, were designed and synthesized. Photophysical and photochemical properties of these PIs have been investigated using UV-Vis spectroscopy, fluorescence spectroscopy and electron spin resonance (ESR). The oxime-esters photolyse rapidly under 450 nm LED light irradiation, especially 2-S, and have good photobleaching capabilities. Also, we have, for the first time, shown that heterocyclic radicals efficiently initiate free radical polymerization of acrylate monomers. Notably, these photobleaching initiators can be used to induce thiol-based click photopolymerization to prepare materials with a thickness of up to 10 mm.
- 2 January 2020
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 11 (7) , 1356-1363
Cleavable coumarin-based oxime esters with terminal heterocyclic moieties: photobleachable initiators for deep photocuring under visible LED light irradiation
Development of efficient unimolecular visible light photoinitiators (PIs) with photobleaching capabilities, which is essential for various biomedical applications and photopolymerization of thick materials, remains an emerging challenge. Based on the photochemistry of heteroaromatic compounds, unimolecular visible light oxime ester PIs (2-O, 2-S, 3-O, and 3-S), which contain coumarin derivatives as visible light chromophores, were designed and synthesized. Photophysical and photochemical properties of these PIs have been investigated using UV-Vis spectroscopy, fluorescence spectroscopy and electron spin resonance (ESR). The oxime-esters photolyse rapidly under 450 nm LED light irradiation, especially 2-S, and have good photobleaching capabilities. Also, we have, for the first time, shown that heterocyclic radicals efficiently initiate free radical polymerization of acrylate monomers. Notably, these photobleaching initiators can be used to induce thiol-based click photopolymerization to prepare materials with a thickness of up to 10 mm.
- 19 July 2018
- Published by Royal Society of Chemistry (RSC)
- p. 358-430
Water-soluble Photoinitiators: Present and Future
While photopolymerization of water-based formulations is a well-established technology, especially for coating applications, and water-soluble photoinitiators have been known for a long time, they did not find widespread use in industrial applications. Preferentially liquid commercial oil-soluble photoinitiators, possibly in combination with a dispersant aid, can in fact successfully be used in most water-borne UV-curable coatings and inks. Research on new developments aimed at water-soluble photoinitiators was thus mostly restricted to academia. However, in recent years new technologies, such as UV-LED inkjet printing for packaging applications, or the increasingly important additive manufacturing processes in tissue engineering and other biomedical applications, which are based on photolithography of aqueous formulations, created a new need for fully water-soluble photoinitiators that in addition meet requirements such as absorbance in the near-UV–visible, low migration or favorable cytotoxic properties. These requirements, which also created a significant market need, have stimulated significant activity in this field in recent years, not only in academia, but also in industrial, application-focused research. Besides optimization of known concepts aimed at providing water-soluble photoinitiators, several novel approaches have thus been proposed and evaluated, and the introduction of water-soluble photoinitiators as commercial products is close to realization. This chapter gives an overview of recent developments with new water-soluble photoinitiators, but also includes some novel applications of known compounds in aqueous formulations.
- 19 July 2018
- Published by Royal Society of Chemistry (RSC)
- p. 358-430
Water-soluble Photoinitiators: Present and Future
While photopolymerization of water-based formulations is a well-established technology, especially for coating applications, and water-soluble photoinitiators have been known for a long time, they did not find widespread use in industrial applications. Preferentially liquid commercial oil-soluble photoinitiators, possibly in combination with a dispersant aid, can in fact successfully be used in most water-borne UV-curable coatings and inks. Research on new developments aimed at water-soluble photoinitiators was thus mostly restricted to academia. However, in recent years new technologies, such as UV-LED inkjet printing for packaging applications, or the increasingly important additive manufacturing processes in tissue engineering and other biomedical applications, which are based on photolithography of aqueous formulations, created a new need for fully water-soluble photoinitiators that in addition meet requirements such as absorbance in the near-UV–visible, low migration or favorable cytotoxic properties. These requirements, which also created a significant market need, have stimulated significant activity in this field in recent years, not only in academia, but also in industrial, application-focused research. Besides optimization of known concepts aimed at providing water-soluble photoinitiators, several novel approaches have thus been proposed and evaluated, and the introduction of water-soluble photoinitiators as commercial products is close to realization. This chapter gives an overview of recent developments with new water-soluble photoinitiators, but also includes some novel applications of known compounds in aqueous formulations.
- 16 January 2018
- Published by Wiley in Angewandte Chemie
- Vol. 130 (9) , 2377-2380
All‐in‐One Cellulose Nanocrystals for 3D Printing of Nanocomposite Hydrogels
Cellulose nanocrystals (CNCs) with >2000 photoactive groups on each can act as highly efficient initiators for radical polymerizations, cross‐linkers, as well as covalently embedded nanofillers for nanocomposite hydrogels. This is achieved by a simple and reliable method for surface modification of CNCs with a photoactive bis(acyl)phosphane oxide derivative. Shape‐persistent and free‐standing 3D structured objects were printed with a mono‐functional methacrylate, showing a superior swelling capacity and improved mechanical properties.
- 16 January 2018
- Published by Wiley in Angewandte Chemie
- Vol. 130 (9) , 2377-2380
All‐in‐One Cellulose Nanocrystals for 3D Printing of Nanocomposite Hydrogels
Cellulose nanocrystals (CNCs) with >2000 photoactive groups on each can act as highly efficient initiators for radical polymerizations, cross‐linkers, as well as covalently embedded nanofillers for nanocomposite hydrogels. This is achieved by a simple and reliable method for surface modification of CNCs with a photoactive bis(acyl)phosphane oxide derivative. Shape‐persistent and free‐standing 3D structured objects were printed with a mono‐functional methacrylate, showing a superior swelling capacity and improved mechanical properties.
- 16 January 2018
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 57 (9) , 2353-2356
All‐in‐One Cellulose Nanocrystals for 3D Printing of Nanocomposite Hydrogels
Cellulose nanocrystals (CNCs) with >2000 photoactive groups on each can act as highly efficient initiators for radical polymerizations, cross‐linkers, as well as covalently embedded nanofillers for nanocomposite hydrogels. This is achieved by a simple and reliable method for surface modification of CNCs with a photoactive bis(acyl)phosphane oxide derivative. Shape‐persistent and free‐standing 3D structured objects were printed with a mono‐functional methacrylate, showing a superior swelling capacity and improved mechanical properties.
- 16 January 2018
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 57 (9) , 2353-2356
All‐in‐One Cellulose Nanocrystals for 3D Printing of Nanocomposite Hydrogels
Cellulose nanocrystals (CNCs) with >2000 photoactive groups on each can act as highly efficient initiators for radical polymerizations, cross‐linkers, as well as covalently embedded nanofillers for nanocomposite hydrogels. This is achieved by a simple and reliable method for surface modification of CNCs with a photoactive bis(acyl)phosphane oxide derivative. Shape‐persistent and free‐standing 3D structured objects were printed with a mono‐functional methacrylate, showing a superior swelling capacity and improved mechanical properties.
- 22 July 2016
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 8 (30) , 19764-19771
A Simple Preparation of Photoactive Glass Surfaces Allowing Coatings via the “Grafting-from” Method
- 22 July 2016
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 8 (30) , 19764-19771
A Simple Preparation of Photoactive Glass Surfaces Allowing Coatings via the “Grafting-from” Method
- 10 November 2010
- Published by Royal Society of Chemistry (RSC)
- p. 344-368
Industrial applications of photochemistry: automotive coatings and beyond
Photochemistry is an essential tool in both the manufacturing and the use of modern cars. Radiation curing is used as a very efficient, economically and ecologically attractive technology for the coating and bonding of many of the parts used in a car, and avoiding degradation of the coating due to photoinduced processes during the foreseen service time is a key issue. Ecological heat management and the OLED technology used for lightening and signage are further examples of useful exploitation of light-induced effects. This paper reviews new photochemistry-related developments such as radiation curing of automotive coatings on the three-dimensional car body, and gives an outlook on future developments.
- 10 November 2010
- Published by Royal Society of Chemistry (RSC)
- p. 344-368
Industrial applications of photochemistry: automotive coatings and beyond
Photochemistry is an essential tool in both the manufacturing and the use of modern cars. Radiation curing is used as a very efficient, economically and ecologically attractive technology for the coating and bonding of many of the parts used in a car, and avoiding degradation of the coating due to photoinduced processes during the foreseen service time is a key issue. Ecological heat management and the OLED technology used for lightening and signage are further examples of useful exploitation of light-induced effects. This paper reviews new photochemistry-related developments such as radiation curing of automotive coatings on the three-dimensional car body, and gives an outlook on future developments.
- 17 November 2009
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 48 (49) , 9359-9361
Decisive Reaction Steps at Initial Stages of Photoinitiated Radical Polymerizations
- 17 November 2009
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 48 (49) , 9359-9361
Decisive Reaction Steps at Initial Stages of Photoinitiated Radical Polymerizations