JSJonas Sundqvist

Jonas Sundqvist

*This is an algorithmically generated author record based on publicly available information.

Jonas Sundqvist has a total of 171 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • More on the Conception of Atomic Layer Etching: Seiko’s Master Inventor Using the Principle of Alternated Exposures of Silicon to Halogens and to Heat, Ions, and More

    by Fred Roozeboom, Jonas Sundqvist, Dmitry B. Suyatin, Kuniyuki Kakushima

    For the past decade (1,2) the first patent published on Atomic Layer Etching (ALE) was thought to have been conceived by Max Yoder (3), who in 1987 filed the concept on etching diamond by saturating its surface with alternated pulses of NO 2 and ionized noble gas / H 2 gas mixtures. This date of conception still holds for plasma-assisted ALE of diamond. Surprisingly, we needed extensive A.I.-assisted patent searches to find out that thermal ALE of silicon was conceived as early as in 1981 by dr. Seiichi Iwamatsu (Fig. 1) of Seiko Epson, Japan. He stands out as concept inventor of ALE with his first application that was filed for the application on Si-etching by exposures to iodine (I 2 ) vapor at moderate temperatures (20-100 °C), followed by a light or heat pulse up to ~300 °C (4) ; see Fig. 2. A few more patents on ALE in his name appeared shortly after (5), one of them being disclosed on plasma-assisted quasi-ALE, which he described as “digital etching” (6). The process steps comprised the modification of the Si-surface by “lamination” with a single Cl-atomic layer from exposure to Cl 2 gas, followed by a removal step carried out by Ar + -ion bombardment to etch off “one atomic layer or at most three atomic layers by controlling the kinetic energy”. Other researchers in Japan can be recognized as the concept demonstrators who, soon after, published on digital etching of GaAs, with similar two-step physico-chemistry recipes (7). Fueled by early-leading groups, who worked on thermal and plasma ALE of metals, metal oxides, metal nitrides, semiconductors, and their oxides, ALE is now an established technique in the commercial manufacture of 3D logic and memory devices in single-digit nanometer technology nodes; see the reviews in refs. (8,9). This presentation follows our earlier presentation (10) and will highlight our continued quest on the groundbreaking work and background of the Japanese inventor. Seiichi Iwamatsu was born in 1939 in Kyoto to a family of physicians, grew up in Osaka and studied there. Next, he worked for some 20 years as a ‘master inventor’ and created over 1200 patents in his name for Seiko Epson (~1970-1990), and for other employers, including Japan’s renowned VLSI Lab. He played key innovative roles in thin-film technology and e-beam lithography, and contributed also this way to the success story of Seiko’s quartz watch (11), a masterpiece in micromachining and hermetic sealing of the quartz resonator and its heterogeneous integration with microelectronics. Dr. Iwamatsu is still active: earlier this year he contributed chapters to the newly published book on the Japanese consortium (“ VLSI Lab ”) in the 1970's (12), for which he also worked; Fig. 1c. We intend to include a short interview with Dr. Iwamatsu, now 86 years old, and conclude that he can and should be widely recognized as the original inventor of Atomic Layer Etching of silicon. Acknowledgement The authors would like to thank Prof. R. Puurunen (Aalto University, Finland) for extensive consultations, and Dr. Masanobu Honda (Tokyo Electron Miyagi Ltd., Japan) for his support in retrieving some of the historic facts mentioned here about Dr. Iwamatsu. References K.J. Kanarik, T. Lill, E.A. Hudson, S. Sriraman, S. Tan, J. Marks, V. Vahedi and R.A. Gottscho, Overview of atomic layer etching in the semiconductor industry , J. Vac. Sci. Technol. A 33 , 020802 (2015). W.M.M. Kessels, www.atomiclimits.com, March 2, 2020. M.N. Yoder, Atomic Layer Etching , US Patent 4,756,794, priority Aug. 31, 1987; published July 12, 1988; assigned to US Navy. S. Iwamatsu, Atomic Layer Etching Method , JPS5898929A / JPH0379862B2; priority Dec. 9, 1981; published June 13, 1983; assigned to Seiko Epson Corp. https://worldwide.espacenet.com/patent/search/family/016189802/publication/JPH0472726A?q=iwamatsu%20seiichi%20atomic%20layer%20etching S. Iwamatsu, Digital Etching Process , JPH0472726A, priority: July 13, 1990, published March 6, 1992; assigned to Seiko Epson Corp. T. Meguro, M. Ishii, K. Kodama, Y. Yamamoto, K. Gamo, and Y. Aoyagi, Surface processes in digital etching of GaAs , Thin Solid Films 225 , 136 (1993). A. Fischer, A. Routzahn, S.M. George, T. Lill, Thermal atomic layer etching : A review, J. Vac. Sci. Technol. A 39 , 030801 (2021), and references therein. A. Fischer and T. Lill, Plasma application in atomic layer etching , Phys. Plasmas 30 , 080601 (2023), and references therein. F. Roozeboom, J. Sundqvist, D. Suyatin, K. Kakushima, Seiichi Iwamatsu, the inventor of Atomic Layer Etching: The conception of cycled exposures of silicon to halogens and pulses of heat, ions, and more , PRiME 2024 Meeting, Honolulu, Oct. 6-11, 2024, late paper G-5068. https://corporate.epson/en/technology/search-by-products/wearable/quartz-watch.html Y. Tarui (editor), Ultra-LSI Joint Research Institute and its Ripple Effects , Maruzen-Junkudo, Tokyo, published March 26, 2025. ISBN/JAN: 9784863455788 https://www.maruzenjunkudo.co.jp/products/9784863455788?srsltid=AfmBOopEUUDlCrWvH4lNc24DJqpMJUNrB-QXY0IhwsihbqYXyk3lg06l Figure 1

  • A New Alternative to Self-Aligned Double Patterning: Pitch Splitting by Atomic Layer Etching

    by Jonas Sundqvist, Muhammad H. Asif, Intu Sharma, Yoana Ilarionova, Robin Athle, Amin Karimi, Reza Jafari Jam, Fred Roozeboom, Dmitry B. Suyatin

    We have developed a method to split nanostructures in half by a single process step using Atomic Layer Etching Pitch Splitting. This method, APS TM , is a new and alternative process approach to Self-Aligned Double Patterning (SADP). In advancing cost-effective sub-20-nm feature patterning, APS TM integrates atomic level-controlled processes such as ALE with existing production technologies in a manner that enables the use of feature sidewalls for selective etching (1) without the multiple deposition and etch steps necessary in SADP processes. This provides unprecedented precision and patterning fidelity, which is key in defining critical on-device features. Previously we demonstrated the feasibility of APS TM using Si and GaP nanowires horizontally and randomly distributed over semiconductor surfaces (1). In this work demonstrate the APS TM process using lines lithographically patterned by electron beam lithography (EBL) on 300-mm silicon wafers. We achieve a half-pitch of 20 nm and critical dimensions (CDs) below 15 nm on both single- crystalline and amorphous silicon (a-Si) wafers (Figure 1). Additionally, with APS TM on GaP wafers, we achieve 3 nm CDs (Figure 2). Next, the layers split by the APS TM process can be used as a universal APS TM split mask to enable successive transfer-etch into various materials, including dielectrics, metals, metal nitrides, and high-k dielectrics. Alternatively, the resulting structures after the APS TM process can be directly used for defining critical device features, e.g. fins for fin field-effect transistors (FinFETs) and other 3D FET-structures. Characteristic is the soft-etch nature of the APS TM process, which allows minimal underlying material damage, as demonstrated by high-resolution transmission electron microscopy (HRTEM); see the image in Figure 2. Our novel patterning approach is free of some problems typical for SADP processes, such as shrinkage, “bird’s beak”, tilting, and kinking (2). This suggests that APS TM can be repeated multiple times with a high yield providing unprecedented patterning resolution for future semiconductor technology nodes. Importantly, we estimate that the APS TM process has the potential to reduce leading-edge logic and memory wafer manufacturing costs by up to 40 % per mask layer (will be presented) while concurrently increasing the throughput. This efficiency positions the APS TM process as both competitive and complementary to established patterning technologies such as self-aligned multiple patterning (SAMP, e.g. SADP), and multiple lithography-etch processes (e.g. LELE). APS TM also offers a sustainable solution to industry demands for time and resource conservation and reduced CO 2 eq. emissions. __________________________________________________________________________________________________________________________ References 1) M.S.A. Khan, J. Sundqvist and D. Suyatin, Method for selective etching of nanostructures, US Patent 10,930,515, Feb. 23, 2021; and ibid , US Patent 11,424,130, Aug. 23, 2022. 2) R.A. Farrell, E. Franke, K. Tapily, J. Hotalen, D. O'Meara, A. Raley, A. Ko, P. Biolsi, C. Wajda, G. Leusink, DeVilliers, D. Hetzer, Multi-color fly-cut-SAQP for reduced process variation , Proc. SPIE, 1058611 (2018). https://doi.org/10.1117/12.2303004 Acknowledgments EBL patterned 300-mm wafers were provided by Fraunhofer IPMS Center Nanoelectronic Technologies (CNT) in Dresden, Germany. This work has been financed by Ascent + European Union's Horizon 2020 Research and Innovation Program under GA No. 871130. Figure 1

  • Seiichi Iwamatsu, the Inventor of Atomic Layer Etching: The Conception of Cycled Exposures of Silicon to Halogens and Pulses of Heat, Ions, and More

    by Fred Roozeboom, Jonas Sundqvist, Dmitry B. Suyatin, Kuniyuki Kakushima

    The history of Atomic Layer Deposition (ALD) has been extensively researched in the VPHA-project (www.vph-ald.com/) initiated in 2013 by R. Puurunen [1]. It is commonly accepted that Atomic Layer Deposition (ALD) was conceived in the Baltic area as a unique ultrathin-film growth method based on the repeated, self-terminating gas-solid half-reactions of at least two volatile compounds on a solid substrate surface. Originally, in the 1960’s, the Russians Alekskovski and Kol'tsov [2]) named this method Molecular Layering and exactly 50 years ago, in 1974 the Finnish inventors Suntola and Antson [3] patented the method as Atomic Layer Epitaxy. This fact has been officially celebrated at the 24th ALD Conference in Helsinki (Aug. 5, ’24 ald2024.avs.org). Atomic Layer Etching (ALE) has lagged behind ALD. For long [4,5] the first patent published on ALE was thought to have been initiated by Max Yoder [6]. In 1987 he conceived the idea on diamond etching with intermittent pulsing of nitrogen dioxide and noble gas ions mixed with hydrogen gas. However, it was Seiichi Iwamatsu (Fig. 1) of Seiko Epson, Japan, who filed in 1981 an application on Si-etching by repeated exposure to iodine (I2) chemistry at moderate temperatures (20 °C to 100 °C) followed by a light or heat pulse up to ~ 300 °C [7]; see Fig. 2. This patent was followed by several others on ALE [8]. One of these patents disclosed quasi-ALE (named “digital etching”) via Si-surface modification by “lamination” of a single Cl-atomic layer from exposure to Cl2 gas, followed by a removal step carried out by Ar+-ion bombardment to etch off “one atomic layer or at most three atomic layers by controlling the kinetic energy” [9]. This presentation will highlight the groundbreaking work and background of the Japanese inventor Seiichi Iwamatsu. Born in 1939 in Kyoto to a family of doctors - his father being a practicing physician- he grew up and studied in Osaka, after which he spent many years as a ‘master inventor’ (over 1200 patents filed in his name) for Seiko Epson (~1970-1990) and others afterwards. He played key roles in thin-film technology and e-beam lithography. He also contributed to the success story of Seiko’s quartz watch, a masterpiece in micromachining a miniature tuning fork from crystalline fused silica, tuning/trimming it to 32,768 Hz (=215 Hz), packaging it in a hermetically sealed case and integrating it with flip-flop frequency dividing and counting electronic circuitry and a step motor [10]. From the above it is clear that Mr. Iwamatsu can be recognized as the original inventor of Atomic Layer Etching. ---------------------------------------------------- Acknowledgement The authors would like to thank Dr. Masanobu Honda (Tokyo Electron Miyagi Ltd., Japan) for his support in retrieving some of the historic facts mentioned herewith about Dr. Iwamatsu. References [1] R.L. Puurunen, Chem. Vap. Deposition 20, pp. 332–344 (2014); doi:10.1002/cvde.201402012. [2] V.B. Alekskovski and S. I. Kol'tsov, Some characteristics of molecular layering reactions, Abstract of Scientific and Technical Conference, Goskhimizdat, Leningrad, 1965, p. 67 (in Russian). [3] T. Suntola and J. Antson, FIN 52359, priority Nov. 29, 1974, US Patent 4,058,430, Nov. 15, 1977. [4] K.J. Kanarik, et al., J. Vac. Sci. Technol. A33, 020802 (2015); doi/10.1116/1.4913379. [5] W.M.M. Kessels, www.atomiclimits.com/ March 2, 2020. [6] M.N. Yoder, Atomic Layer Etching, US Patent 4,756,794, July 12, 1988; assigned to US Navy. [7] S. Iwamatsu, Atomic Layer Etching Method, JPS5898929A / JPH0379862B2; priority Dec. 9, 1981, published June 13, 1983; assigned to Seiko Epson Corp. [8] https://worldwide.espacenet.com/patent/search/family/016189802/publication/JPH0472726A?q=iwamatsu%20seiichi%20atomic%20layer%20etching [9] S. Iwamatsu, Digital Etching Process, JPH0472726A, priority: July 13, 1990, published March 6, 1992; assigned to Seiko Epson Corp. [10] https://corporate.epson/en/technology/search-by-products/wearable/quartz-watch.html Figure 1


  • Comparative Analysis of Surface Characterization Techniques for Atomic Layer Etching

    by Reza Jafari Jam, Yoana Ilarionova, Amin Karimi, Muhammad H. Asif, Dmitry B. Suyatin, Jonas Sundqvist

    The growing demand for precise atomic level control in device fabrication has led to the rising popularity of Atomic Layer Etching (ALE).1-3 As the name implies, the process facilitates layer-by-layer material removal in an atomic scale, making low surface damage one of the key features of this process. The low-power ion bombardment and the self-limited nature of different process steps help to reduce the damage induced by ALE. However, the damage is not easy to characterize. Atomic Force Microscopy (AFM) is one of the methods that is widely used for surface characterization. However, roughness measurements of the surface using AFM may be misleading as it primarily reflects the top surface, which is typically composed of native oxide rather than the actual Si surface. In this work, we discuss how we used X-Ray reflectometry (XRR) together with ellipsometry to measure the damage induced to the Si device layer of a Silicon on Insulator (SOI) wafer. The experiments were done on an SOI wafer with a 55 nm thick device layer and 145 nm box layer. In order to remove native oxide, all samples were treated with Buffered oxide etch (BOE) 10:1 right before the etch process. The cyclic process was performed in a commercial Inductively Coupled Plasma Reactive Ion Etcher (ICP-RIE) Takachi™ tool from Plasma-Therm LLC, USA. The process gases were Chlorine to activate the Si surface and Ar to remove the activated surface. There was no plasma during activation and purging, it was only ignited during the removal step. XRR, AFM, and ellipsometry characterizations were used to monitor the damage induced by the process. These methods were used to measure the surface roughness before and after the process. In the ellipsometry model, a damage layer is incorporated to evaluate the Si surface that has undergone plasma bombardment resulting in its transformation into amorphous Si. This layer is typically referred to as the surface damage layer. The XRR can measure the roughness on Si layer right beneath the native oxide which again demonstrates the surface damage. On the other hand, AFM measures the roughness at the surface of native oxide. Our results show that while in XRR and ellipsometry, the roughness change follows the same trend, the AFM measurement is not. Results have revealed that in the case of a non-ALE process, both XRR and ellipsometry techniques exhibit a substantial level of surface damage, whereas AFM indicates lower damage. This provides evidence that AFM alone may not be a reliable approach for assessing surface damage. In addition, both XRR and ellipsometry confirm a thick native oxide on top which is very much correlated to the damage. Typically, the thickness of the native oxide is in the ranges between 15-25 Å, and our results support that the thickness of the measured native oxide layer increases with the level of surface damage. References: [1] K. Kanarik et al 2018 J. Phys. Chem. Lett. 9, 16, 4814–4821. [2] G. S. Oehrlein et al 2015 ECS J. Solid State Sci. Technol. 4 N5041 [3] Colin T. Carver et al 2015 ECS J. Solid State Sci. Technol. 4 N5005.

  • Green CVD—Toward a sustainable philosophy for thin film deposition by chemical vapor deposition

    by Henrik Pedersen, Seán T. Barry, Jonas Sundqvist

    Thin films of materials are critical components for most areas of sustainable technologies, making thin film techniques, such as chemical vapor deposition (CVD), instrumental for a sustainable future. It is, therefore, of great importance to critically consider the sustainability aspects of CVD processes themselves used to make thin films for sustainable technologies. Here, we point to several common practices in CVD that are not sustainable. From these, we offer a perspective on several principles for a sustainable, “Green CVD” philosophy, which we hope will spur research on how to make CVD more sustainable without affecting the properties of the deposited film. We hope that these principles can be developed by the research community over time and be used to establish research on how to make CVD more sustainable and that a Green CVD philosophy can develop new research directions for both precursor and reactor design to reduce the precursor and energy consumption in CVD processes.


  • Fluorine interface treatments within the gate stack for defect passivation in 28 nm high-k metal gate technology

    by Maximilian Drescher, Andreas Naumann, Jonas Sundqvist, Elke Erben, Carsten Grass, Martin Trentzsch, Florian Lazarevic, Roman Leitsmann, Philipp Plaenitz

    A novel method of fluorine incorporation into the gate dielectric by gaseous thermal NF3 interface treatments for defect passivation have been investigated in 28 nm high-k metal gate technology with respect to improvement in device reliability. The thermal treatment suppresses physical interface regrowth observed in previous plasma-assisted fluorine treatments. Detailed defect characterization by spectroscopic charge pumping is used to characterize the influence of fluorine on trap states in the interfacial oxide layer. Comprehensive structural as well as electrical characterization linked with bias temperature instability measurements indicates the potential of improving reliability in high-k metal gate technology by gaseous introduction of fluorine into the gate dielectric.


  • Low temperature deposition of silicon nitride using Si3Cl8

    by Stefan Riedel, Jonas Sundqvist, Thomas Gumprecht


  • Role of the dielectric for the charging dynamics of the dielectric/barrier interface in AlGaN/GaN based metal-insulator-semiconductor structures under forward gate bias stress

    by P. Lagger, P. Steinschifter, M. Reiner, M. Stadtmüller, G. Denifl, A. Naumann, J. Müller, L. Wilde, J. Sundqvist, D. Pogany, et al.

    The high density of defect states at the dielectric/III-N interface in GaN based metal-insulator-semiconductor structures causes tremendous threshold voltage drifts, ΔVth, under forward gate bias conditions. A comprehensive study on different dielectric materials, as well as varying dielectric thickness tD and barrier thickness tB, is performed using capacitance-voltage analysis. It is revealed that the density of trapped electrons, ΔNit, scales with the dielectric capacitance under spill-over conditions, i.e., the accumulation of a second electron channel at the dielectric/AlGaN barrier interface. Hence, the density of trapped electrons is defined by the charging of the dielectric capacitance. The scaling behavior of ΔNit is explained universally by the density of accumulated electrons at the dielectric/III-N interface under spill-over conditions. We conclude that the overall density of interface defects is higher than what can be electrically measured, due to limits set by dielectric breakdown. These findings have a significant impact on the correct interpretation of threshold voltage drift data and are of relevance for the development of normally off and normally on III-N/GaN high electron mobility transistors with gate insulation.


  • Origin of the endurance degradation in the novel HfO2-based 1T ferroelectric non-volatile memories

    by Ekaterina Yurchuk, Stefan Mueller, Dominik Martin, Stefan Slesazeck, Uwe Schroeder, Thomas Mikolajick, Johannes Muller, Jan Paul, Raik Hoffmann, Jonas Sundqvist, et al.

    Novel HfO 2 -based non-volatile ferroelectric field effect transistors (FeFETs) reveal integration and scaling properties superior to the devices utilizing perovskite-type ferroelectrics. However, until now the switching endurance of only 10 4 program/erase cycles could be proven. The mechanisms responsible for the cycling degradation have been scarcely studied so far. Therefore, the scope of this paper is to clarify the origin of the cycling degradation in HfO 2 -based FeFETs. Several possible degradation mechanisms - fatigue of the ferroelectric layer and degradation of the transistor gate stack - are proposed and investigated. The limited endurance properties were found to be linked to the transistor gate stack reliability rather than to the ferroelectric material itself. The gate leakage current measurements and the trapping analyses presented in this paper identified a degradation of the interfacial layer in the gate stack, which in turn is strongly linked to a reduction of ferroelectric memory window.


  • Ferroelectric deep trench capacitors based on Al:HfO2 for 3D nonvolatile memory applications

    by P. Polakowski, S. Riedel, W. Weinreich, M. Rudolf, J. Sundqvist, K. Seidel, J. Muller

    Aiming for future nonvolatile memory applications the fabrication and electrical characterization of 3-dimensional trench capacitors based on ferroelectric HfO 2 is reported. It will be shown that the ferroelectric properties of Al-doped HfO 2 ultrathin films are preserved when integrated into 3-dimensional geometries. The Al:HfO 2 thin films were deposited by ALD and electrical data were collected on trench capacitor arrays with a trench count up to 100k. Stable ferroelectric switching behavior was observed for all trench arrays fabricated and only minimal remanent polarization loss with increasing 3-dimensional area gain was observed. In addition these arrays were found to withstand 2 *10 9 endurance cycles at saturated hysteresis loops. With these report the 3D capability of ferroelectric HfO 2 is confirmed and for the first time a feasible solution for the vertical integration of ferroelectric 1T/1C as well as 1T memories is presented.