Zhiwei Qian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Zhiwei Qian has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Erik Schlangen
Faculty of Civil Engineering & Geosciences – Section of Materials & Environment, Delft University of Technology
6 shared publications Rolf Dollevoet
5 shared publicationsHaoliang Huang
4 shared publicationsPeng Gao
4 shared publicationsQijun Yu
4 shared publications- Xiangyun Deng
Section of Railway Engineering, Delft University of Technology, Delft 2628, The Netherlands
4 shared publications
Latest Publications
- 31 July 2022
- Published by Elsevier in Cement and Concrete Research
- Vol. 160
Incorporating elastic and creep deformations in modelling the three-dimensional autogenous shrinkage of cement paste
- 31 July 2022
- Published by Elsevier in Cement and Concrete Research
- Vol. 160
Incorporating elastic and creep deformations in modelling the three-dimensional autogenous shrinkage of cement paste
- 1 July 2021
- Published by Elsevier in Composites Part B: Engineering
- Vol. 216
Effect of coarse aggregate size on non-uniform stress/strain and drying-induced microcracking in concrete
- 1 July 2021
- Published by Elsevier in Composites Part B: Engineering
- Vol. 216
Effect of coarse aggregate size on non-uniform stress/strain and drying-induced microcracking in concrete
- Open Access
- 1 November 2020
- Published by Elsevier in Materials & Design
- Vol. 196
Effect of relative humidity on drying-induced damage in concrete: A comparative study of digital image correlation and lattice modelling
- 1 November 2020
- Published by Elsevier in Materials & Design
- Vol. 196
Open AccessEffect of relative humidity on drying-induced damage in concrete: A comparative study of digital image correlation and lattice modelling
- 1 November 2020
- Published by Elsevier in Cement and Concrete Composites
- Vol. 114
Investigation of drying-induced non-uniform deformation, stress, and micro-crack propagation in concrete
- 1 November 2020
- Published by Elsevier in Cement and Concrete Composites
- Vol. 114
Investigation of drying-induced non-uniform deformation, stress, and micro-crack propagation in concrete
- 1 June 2020
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 996, 91-96
Trigger Mechanism of Microcapsule Based Self-Healing Cementitious Material
A cementitious system embedded in microcapsules can achieve self-healing, and the fracture and triggering behavior of microcapsules is with great importance. In this study, the crack behavior of the concrete-microcapsule system was simulated by a three-dimensional lattice model. Based on the results of the fracture energy test on concrete beams and the nanoindentation test on microcapsules, the local mechanical properties of the lattice elements were determined. The aim of this paper is to set up a three-dimensional lattice model to study the trigger mechanism of the microcapsule-interface-concrete zone.
- 1 June 2020
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 996, 91-96
Trigger Mechanism of Microcapsule Based Self-Healing Cementitious Material
A cementitious system embedded in microcapsules can achieve self-healing, and the fracture and triggering behavior of microcapsules is with great importance. In this study, the crack behavior of the concrete-microcapsule system was simulated by a three-dimensional lattice model. Based on the results of the fracture energy test on concrete beams and the nanoindentation test on microcapsules, the local mechanical properties of the lattice elements were determined. The aim of this paper is to set up a three-dimensional lattice model to study the trigger mechanism of the microcapsule-interface-concrete zone.
- 1 October 2019
- Published by Elsevier in International Journal of Fatigue
- Vol. 127, 431-444
Pre-cracking development of weld-induced squats due to plastic deformation: Five-year field monitoring and numerical analysis
- 1 October 2019
- Published by Elsevier in International Journal of Fatigue
- Vol. 127, 431-444
Pre-cracking development of weld-induced squats due to plastic deformation: Five-year field monitoring and numerical analysis
- Open Access
Numerical Modelling of the Effect of Filler/Matrix Interfacial Strength on the Fracture of Cementitious Composites
The interface between filler and hydration products can have a significant effect on the mechanical properties of the cement paste system. With different adhesion properties between filler and hydration products, the effect of microstructural features (size, shape, surface roughness), particle distribution and area fraction of filler on the fracture behavior of a blended cement paste system is supposed to be different, as well. In order to understand the effect of the microstructural features, particle distribution and area fraction of filler on the fracture behavior of a blended cement paste system with either strong or weak filler-matrix interface, microscale simulations with a lattice model are carried out. The results show that the strength of the filler-matrix interface plays a more important role than the microstructural features, particle distribution and area fraction of filler in the crack propagation and the strength of blended cement paste. The knowledge acquired here provides a clue, or direction, for improving the performance of existing fillers. To improve the performance of fillers in cement paste in terms of strength, priority should be given to improving the bond strength between filler particles and matrix, not to modifying the microstructural features (i.e., shape and surface roughness) of the filler.
Open AccessNumerical Modelling of the Effect of Filler/Matrix Interfacial Strength on the Fracture of Cementitious Composites
The interface between filler and hydration products can have a significant effect on the mechanical properties of the cement paste system. With different adhesion properties between filler and hydration products, the effect of microstructural features (size, shape, surface roughness), particle distribution and area fraction of filler on the fracture behavior of a blended cement paste system is supposed to be different, as well. In order to understand the effect of the microstructural features, particle distribution and area fraction of filler on the fracture behavior of a blended cement paste system with either strong or weak filler-matrix interface, microscale simulations with a lattice model are carried out. The results show that the strength of the filler-matrix interface plays a more important role than the microstructural features, particle distribution and area fraction of filler in the crack propagation and the strength of blended cement paste. The knowledge acquired here provides a clue, or direction, for improving the performance of existing fillers. To improve the performance of fillers in cement paste in terms of strength, priority should be given to improving the bond strength between filler particles and matrix, not to modifying the microstructural features (i.e., shape and surface roughness) of the filler.
- 1 July 2018
- Published by Elsevier in International Journal of Fatigue
- Vol. 112, 94-105
Investigation of the formation of corrugation-induced rail squats based on extensive field monitoring
- 1 July 2018
- Published by Elsevier in International Journal of Fatigue
- Vol. 112, 94-105
Investigation of the formation of corrugation-induced rail squats based on extensive field monitoring
- Open Access
Cyclic Behavior of Low Rise Concrete Shear Walls Containing Recycled Coarse and Fine Aggregates
In this study, the cyclic behaviors of low rise concrete shear walls using recycled coarse or fine aggregates were investigated. Eight low rise Recycled Aggregates Concrete (RAC) shear wall specimens were designed and tested under a cyclic loading. The following parameters were varied: replacement percentages of recycled coarse or fine aggregates, reinforcement ratio, axial force ratio and X-shaped rebars brace. The failure characteristics, hysteretic behavior, strength and deformation capacity, strain characteristics and stiffness were studied. Test results showed that the using of the Recycled Coarse Aggregates (RCA) and its replacement ratio had almost no influence on the mechanical behavior of the shear wall; however, the using of Recycled Fine Aggregates (RFA) had a certain influence on the ductility of the shear wall. When the reinforcement ratio increased, the strength and ductility also increased. By increasing the axial force ratio, the strength increased but the ductility decreased significantly. The encased brace had a significant effect on enhancing the RAC shear walls. The experimental maximum strengths were evaluated with existing design codes, it was indicated that the strength evaluation of the low rise RAC shear walls can follow the existing design codes of the conventional concrete shear walls.
Open AccessCyclic Behavior of Low Rise Concrete Shear Walls Containing Recycled Coarse and Fine Aggregates
In this study, the cyclic behaviors of low rise concrete shear walls using recycled coarse or fine aggregates were investigated. Eight low rise Recycled Aggregates Concrete (RAC) shear wall specimens were designed and tested under a cyclic loading. The following parameters were varied: replacement percentages of recycled coarse or fine aggregates, reinforcement ratio, axial force ratio and X-shaped rebars brace. The failure characteristics, hysteretic behavior, strength and deformation capacity, strain characteristics and stiffness were studied. Test results showed that the using of the Recycled Coarse Aggregates (RCA) and its replacement ratio had almost no influence on the mechanical behavior of the shear wall; however, the using of Recycled Fine Aggregates (RFA) had a certain influence on the ductility of the shear wall. When the reinforcement ratio increased, the strength and ductility also increased. By increasing the axial force ratio, the strength increased but the ductility decreased significantly. The encased brace had a significant effect on enhancing the RAC shear walls. The experimental maximum strengths were evaluated with existing design codes, it was indicated that the strength evaluation of the low rise RAC shear walls can follow the existing design codes of the conventional concrete shear walls.