Samaherni Dias
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Samaherni Dias has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
Aldayr Araujo
Laboratory of Automation, Control, and Instrumentation, Department of Electrical Engineering, Federal University of Rio Grande do Norte, Natal, Brazil
7 shared publications- Kurios Queiroz
Department of Electrical Engineering, Federal University of Rio Grande do Norte (UFRN), Natal, Brazil
6 shared publications Kurios Queiroz
Laboratory of Automation, Control, and Instrumentation, Department of Electrical Engineering, Federal University of Rio Grande do Norte, Natal, Brazil
4 shared publications- Kurios Iuri Pinheiro de Melo Queiroz
Federal University of Rio Grande do Norte, Natal, Brazil
2 shared publications - Alex C. R. Alves
Electrical and Computer Engineering Graduate Program, Federal University of Rio Grande do Norte (UFRN), Natal, Brazil
1 shared publication - Allan Martins
Departamento de Física Teórica e Experimental, Universidade Federal do Rio Grande do Norte, Campus Universitário, Natal, RN 59072-970, Brazil
1 shared publication
Latest Publications
- 26 November 2025
- Published by Sociedade Brasileira de Computação
- p. 13-16
Using Shields as Educational Tools for Firmware Development on Engineering Courses
Engineering education demands the integration of theory and practice, yet most commercial kits are costly and limited to specific experiments. This work presents an educational shield compatible with the UNO R3 pin standard to support embedded systems learning. The shield features LCD and 7-segment displays, push-buttons, a buzzer, an RGB LED, a potentiometer, an R-2R ladder network, and interfaces for I2C, SPI, and UART protocols, broadening experimentation options. The methodology comprised requirement definition, component selection, schematic design, and PCB development using EasyEDA. The shield enables practical experiments such as digital safes, digital filters (IIR, FIR), Software-Defined Radio (SDR), control systems (PID), timers with Human-Machine Interface (HMI), I2C-based schedulers, and spectrum analyzers.
- 26 November 2025
- Published by Sociedade Brasileira de Computação
- p. 13-16
Using Shields as Educational Tools for Firmware Development on Engineering Courses
Engineering education demands the integration of theory and practice, yet most commercial kits are costly and limited to specific experiments. This work presents an educational shield compatible with the UNO R3 pin standard to support embedded systems learning. The shield features LCD and 7-segment displays, push-buttons, a buzzer, an RGB LED, a potentiometer, an R-2R ladder network, and interfaces for I2C, SPI, and UART protocols, broadening experimentation options. The methodology comprised requirement definition, component selection, schematic design, and PCB development using EasyEDA. The shield enables practical experiments such as digital safes, digital filters (IIR, FIR), Software-Defined Radio (SDR), control systems (PID), timers with Human-Machine Interface (HMI), I2C-based schedulers, and spectrum analyzers.
- Open Access
- 1 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 90815-90828
A Parity-Based Dual Modular Redundancy Approach for the Reliability of Data Transmission in Nanosatellite’s Onboard Processing
Nanosatellites’ embedded systems must adapt to power, weight, size, and cost constraints. Thus, over the years, the use of Commercial-Off-The-Shelf (COTS) System-on-Chip (SoC) has become common. They have a lower development cost and better performance when compared to components specifically designed for space, although they are more susceptible to the radiation effects. A point of attention in these devices is the reliability of data transmitted between hardcore processors and applications in the reconfigurable logic area. This work proposes a Parity-based Dual Modular Redundancy (PDMR) approach for use in interconnect interfaces of COTS SoCs. The experiments were conducted through simulations with Python scripts and hardware implementations in a Xilinx Zynq-7000 SoC. The proposed technique was compared with the Triple Modular Redundancy (TMR) technique. The simulation results show that for specific rates, the proposed approach reaches values close to those of the TMR and implies a smaller number of bits transmitted even when data detected as erroneous are retransmitted. Meanwhile, hardware implementation results demonstrate a decrease in hardware resource utilization and power consumption compared to TMR implementation.
- 1 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 90815-90828
Open AccessA Parity-Based Dual Modular Redundancy Approach for the Reliability of Data Transmission in Nanosatellite’s Onboard Processing
Nanosatellites’ embedded systems must adapt to power, weight, size, and cost constraints. Thus, over the years, the use of Commercial-Off-The-Shelf (COTS) System-on-Chip (SoC) has become common. They have a lower development cost and better performance when compared to components specifically designed for space, although they are more susceptible to the radiation effects. A point of attention in these devices is the reliability of data transmitted between hardcore processors and applications in the reconfigurable logic area. This work proposes a Parity-based Dual Modular Redundancy (PDMR) approach for use in interconnect interfaces of COTS SoCs. The experiments were conducted through simulations with Python scripts and hardware implementations in a Xilinx Zynq-7000 SoC. The proposed technique was compared with the Triple Modular Redundancy (TMR) technique. The simulation results show that for specific rates, the proposed approach reaches values close to those of the TMR and implies a smaller number of bits transmitted even when data detected as erroneous are retransmitted. Meanwhile, hardware implementation results demonstrate a decrease in hardware resource utilization and power consumption compared to TMR implementation.
- 27 June 2024
- Published by Springer Nature in Journal of Control, Automation and Electrical Systems
- Vol. 35 (5) , 839-860
Compartmental Nonlinear Epidemic Disease Model with Mixed Behavior
- 27 June 2024
- Published by Springer Nature in Journal of Control, Automation and Electrical Systems
- Vol. 35 (5) , 839-860
Compartmental Nonlinear Epidemic Disease Model with Mixed Behavior
- Open Access
- 18 October 2023
- Published by SWGE Sistemas Ltda in Anais Do Vi Simpósio Brasileiro de Sistemas Elétricos
- Vol. 1 (2)
Sistemas Embarcados de Tempo Real para Simulação, Estimação e Controle de Atitude de Nanossatélites
This work proposes a real-time simulator, based on the Hardware-in-the-loop technique, for the Attitude Determination and Control System of a cubesat. With the purpose of being a low-cost solution, it is composed of two single-board computers available on the market, one of them simulates the dynamic models of attitude and orbit propagation, as well as cubesat sensing (magnetometer and sun sensor) in space environment and the other to receive the firmware developed for cubesat. The first makes use of open libraries to simulate the spatial environment that cubesat is in from a certain desired orbit. The second has hardware similar to that used in cubesat and implements the state estimator and the attitude controller. To prove the functioning of the simulator, simulation results are presented and analyzed.
- 18 October 2023
- Published by SWGE Sistemas Ltda in Anais Do Vi Simpósio Brasileiro de Sistemas Elétricos
- Vol. 1 (2)
Open AccessSistemas Embarcados de Tempo Real para Simulação, Estimação e Controle de Atitude de Nanossatélites
This work proposes a real-time simulator, based on the Hardware-in-the-loop technique, for the Attitude Determination and Control System of a cubesat. With the purpose of being a low-cost solution, it is composed of two single-board computers available on the market, one of them simulates the dynamic models of attitude and orbit propagation, as well as cubesat sensing (magnetometer and sun sensor) in space environment and the other to receive the firmware developed for cubesat. The first makes use of open libraries to simulate the spatial environment that cubesat is in from a certain desired orbit. The second has hardware similar to that used in cubesat and implements the state estimator and the attitude controller. To prove the functioning of the simulator, simulation results are presented and analyzed.
- Open Access
- 18 October 2023
- Published by SWGE Sistemas Ltda in Anais Do Vi Simpósio Brasileiro de Sistemas Elétricos
- Vol. 1 (2)
Implementação em Python do Cálculo do Conjunto Estabilizante para um Controlador PI
This paper presents a Python language approach for computing the stabilizing set of PI (Proportional Integral) gains for a stable, single-input and single-output (SISO), linear timeinvariant and non-minimum phase system, with two poles and one zero. We used the “Signature Method”, a technique developed by researchers from Texas A&M University that computes the stabilizing set of PID (Proportional Integral Derivative) gains. Despite its effectiveness, this technique suffers from some software implementation difficulties due to the complexity of the algorithm. Thus, this work proposes an alternative implementation based on the SymPy package, a Python library for symbolic mathematics. For testing purposes, ten thousand samples (controller gains values) were generated and sorted based on the developed code.
- 18 October 2023
- Published by SWGE Sistemas Ltda in Anais Do Vi Simpósio Brasileiro de Sistemas Elétricos
- Vol. 1 (2)
Open AccessImplementação em Python do Cálculo do Conjunto Estabilizante para um Controlador PI
This paper presents a Python language approach for computing the stabilizing set of PI (Proportional Integral) gains for a stable, single-input and single-output (SISO), linear timeinvariant and non-minimum phase system, with two poles and one zero. We used the “Signature Method”, a technique developed by researchers from Texas A&M University that computes the stabilizing set of PID (Proportional Integral Derivative) gains. Despite its effectiveness, this technique suffers from some software implementation difficulties due to the complexity of the algorithm. Thus, this work proposes an alternative implementation based on the SymPy package, a Python library for symbolic mathematics. For testing purposes, ten thousand samples (controller gains values) were generated and sorted based on the developed code.
- 11 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 29, 284-289
New switched adaptive controller for the industrial tanks
Industrial environments are full of phenomena that represent enormous challenges to control engineers. Sometimes, a simple process such as the liquid level control in an arrangement of cylindrical tanks imposes several constraints that require continuous human supervision. Most of the traditional control techniques in the industry are linear, although the industrial plant is nonlinear. This fact, associated with disturbances, uncertainties in the parameters, and coupling, among others, imposes constraints on the traditional controllers, which, sometimes, allows them to show good response in a limited operation point. Thus, this work presents a robust nonlinear controller for industrial cylindrical tanks. It does not have constraints related to operation points and is robust to several industrial phenomena. To verify the performance of the proposed controller, we applied it for the quadruple tank process. The work beyond the proposed controller presents results of stability analysis and simulations.
- 11 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 29, 284-289
New switched adaptive controller for the industrial tanks
Industrial environments are full of phenomena that represent enormous challenges to control engineers. Sometimes, a simple process such as the liquid level control in an arrangement of cylindrical tanks imposes several constraints that require continuous human supervision. Most of the traditional control techniques in the industry are linear, although the industrial plant is nonlinear. This fact, associated with disturbances, uncertainties in the parameters, and coupling, among others, imposes constraints on the traditional controllers, which, sometimes, allows them to show good response in a limited operation point. Thus, this work presents a robust nonlinear controller for industrial cylindrical tanks. It does not have constraints related to operation points and is robust to several industrial phenomena. To verify the performance of the proposed controller, we applied it for the quadruple tank process. The work beyond the proposed controller presents results of stability analysis and simulations.
- 1 May 2022
- Published by Elsevier in ISA Transactions
- Vol. 124, 21-30
Controlling epidemic diseases based only on social distancing level: General case
- 1 May 2022
- Published by Elsevier in ISA Transactions
- Vol. 124, 21-30
Controlling epidemic diseases based only on social distancing level: General case
- 31 October 2021
- Published by Springer Nature in Journal of Control, Automation and Electrical Systems
- Vol. 33 (1) , 23-37
Introduction to Group-Structured-Epidemic Model
The spread of an infectious disease in a population is a random process when considering a small group of individuals. However, to a great group of individuals, the use of deterministic behavior is better. Based on these facts, in the literature, there were proposed stochastic and deterministic epidemic models. This work proposes a mixed compartmental epidemic model that allows stratifying the population into groups, considers demographic and environmental variability, presents an approximation to stochastic effects, and contemplates the network effects. The proposed model has a compact form to assist in the synthesis of the control law and parameters estimation strategies. Its objective is to overcome the difficulties encountered when used purely deterministic or purely stochastic models. In the end, to detail and verify the functioning of the proposed model, we present a set of flowcharts and simulations.
- 31 October 2021
- Published by Springer Nature in Journal of Control, Automation and Electrical Systems
- Vol. 33 (1) , 23-37
Introduction to Group-Structured-Epidemic Model
The spread of an infectious disease in a population is a random process when considering a small group of individuals. However, to a great group of individuals, the use of deterministic behavior is better. Based on these facts, in the literature, there were proposed stochastic and deterministic epidemic models. This work proposes a mixed compartmental epidemic model that allows stratifying the population into groups, considers demographic and environmental variability, presents an approximation to stochastic effects, and contemplates the network effects. The proposed model has a compact form to assist in the synthesis of the control law and parameters estimation strategies. Its objective is to overcome the difficulties encountered when used purely deterministic or purely stochastic models. In the end, to detail and verify the functioning of the proposed model, we present a set of flowcharts and simulations.
- 8 June 2021
- Published by Springer Nature in Journal of Control, Automation and Electrical Systems
- Vol. 33 (1) , 8-22
Controlling Epidemic Diseases Based only on Social Distancing Level
On March 11, 2020, the world health organization (WHO) characterized COVID-19 as a pandemic. When the COVID-19 outbreak began to spread, there was no vaccination and no treatment. To epidemic diseases without vaccines or other pharmaceutical intervention, the only way to control them is a sustained physical distancing. In this work, we propose a simple control law to keep the epidemic outbreak controlled. A sustained physical distancing level is adjusted to guarantee the fastest way to finish the outbreak with the number of hospitalized individuals below the desired value. This technique can reduce the economic problems of social distancing and keeps the health care system working. The proposed controller is a closed-loop approach that uses the number of hospitalized individuals as the feedback signal. It also does not need massive swab tests, which simplify the application of the technique. We do stability analyses of the proposed controller to prove the robustness to uncertainties in the parameters and unmodeled dynamics. We present a version of the proposed controller to operate using steps to reopen, which is relevant to help the decision-makers. The proposed controller is so simple that we can use a spreadsheet to calculate the physical distancing level. In the end, we present a set of numerical simulations to highlight the behavior of the number of hospitalized individuals during an epidemic disease when using the proposed control law. We simulate the proposed controller applied to the ideal case, considering uncertainties, unmodeled dynamics, a 10 days latent period, and different values of the desired number of hospitalized individuals. In all cases, the proposed controller ensures the number of hospitalized individuals lower than the upper limit of a predefined range.
- 8 June 2021
- Published by Springer Nature in Journal of Control, Automation and Electrical Systems
- Vol. 33 (1) , 8-22
Controlling Epidemic Diseases Based only on Social Distancing Level
On March 11, 2020, the world health organization (WHO) characterized COVID-19 as a pandemic. When the COVID-19 outbreak began to spread, there was no vaccination and no treatment. To epidemic diseases without vaccines or other pharmaceutical intervention, the only way to control them is a sustained physical distancing. In this work, we propose a simple control law to keep the epidemic outbreak controlled. A sustained physical distancing level is adjusted to guarantee the fastest way to finish the outbreak with the number of hospitalized individuals below the desired value. This technique can reduce the economic problems of social distancing and keeps the health care system working. The proposed controller is a closed-loop approach that uses the number of hospitalized individuals as the feedback signal. It also does not need massive swab tests, which simplify the application of the technique. We do stability analyses of the proposed controller to prove the robustness to uncertainties in the parameters and unmodeled dynamics. We present a version of the proposed controller to operate using steps to reopen, which is relevant to help the decision-makers. The proposed controller is so simple that we can use a spreadsheet to calculate the physical distancing level. In the end, we present a set of numerical simulations to highlight the behavior of the number of hospitalized individuals during an epidemic disease when using the proposed control law. We simulate the proposed controller applied to the ideal case, considering uncertainties, unmodeled dynamics, a 10 days latent period, and different values of the desired number of hospitalized individuals. In all cases, the proposed controller ensures the number of hospitalized individuals lower than the upper limit of a predefined range.
- 9 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A Left-inverse Non-linear Controller to a RRR Manipulator
This paper considers the control of an articulated robotic manipulator, classified in the literature as anthropomorphic (RRR), which is formed by three rotary joints, three degrees of freedom, and spatial movement. This kind of manipulator provides large freedom of movement inside its workspace and it is widely used in many fields. In order to control the manipulator, a PD control strategy will be used, which makes use of an inversion of systems to decouple and control each joint individually. In the end, to verify its behavior, the proposed controller is simulated.
- 9 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A Left-inverse Non-linear Controller to a RRR Manipulator
This paper considers the control of an articulated robotic manipulator, classified in the literature as anthropomorphic (RRR), which is formed by three rotary joints, three degrees of freedom, and spatial movement. This kind of manipulator provides large freedom of movement inside its workspace and it is widely used in many fields. In order to control the manipulator, a PD control strategy will be used, which makes use of an inversion of systems to decouple and control each joint individually. In the end, to verify its behavior, the proposed controller is simulated.