Luis Benadero
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Luis Benadero has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Abdelali El Aroudi
Department dEnginyeria Electrnica, Elctrica i Automtica, Universitat Rovira i Virgili, Tarragona, Spain
13 shared publications E. Toribio
Departament de Física Aplicada, Universitat Politècnica de Catalunya, Barcelona, Spain
6 shared publications- Enrique Ponce
Department of Applied Mathematics II, University of Seville, Seville, Spain
6 shared publications - Luis Martinez-Salamero
Group of Automatic Control and Industrial Electronics, Rovira i Virgili University, Tarragona, Spain
6 shared publications - Roberto Giral
Universitat Rovira i Virgili, Departament dEnginyeria Electrnica, Elctrica i Automtica, Tarragona, Spain
6 shared publications Vanessa Moreno-Font
Universitat Politecnica de Catalunya, Barcelona, Spain
5 shared publications
Latest Publications
- Open Access
- 23 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. PP (15498328) , 1-11
Bogdanov–Takens Bifurcation in a Bidirectional DC–DC Converter Supplying a Constant Power Load
Over the decades, bifurcation theory has emerged as a significant area of research, providing deep insights into the complex dynamics of systems across multiple disciplines. Moreover, it serves as a foundation for devising effective control methodologies aimed at avoiding or delaying undesirable dynamical transitions. This paper deals with both local and global dynamics of a bidirectional dc-dc boost converter supplying a constant power load (CPL) with a stabilizing resistor inserted in series with the main inductor. Numerical simulations performed on the averaged model of the system show interesting bifurcation phenomena explaining its local and global dynamical behavior. In particular, it is shown that in some parametric region, the system has two coexisting equilibria, one of them being a saddle and the other one an anti-saddle. The latter can be stable or unstable. An unstable limit cycle also coexists with the stable anti-saddle equilibrium. This limit cycle disappears through a homoclinic bifurcation. Moreover, a parameter space reduction is carried out by choosing suitable bifurcation parameters, and the normal form of the Bogdanov-Takens bifurcation is obtained hence mathematically demonstrating its existence. Finally, the analytical and simulation results on the switched model are partially validated by experimental measurements from a laboratory prototype.
- 23 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. PP (15498328) , 1-11
Open AccessBogdanov–Takens Bifurcation in a Bidirectional DC–DC Converter Supplying a Constant Power Load
Over the decades, bifurcation theory has emerged as a significant area of research, providing deep insights into the complex dynamics of systems across multiple disciplines. Moreover, it serves as a foundation for devising effective control methodologies aimed at avoiding or delaying undesirable dynamical transitions. This paper deals with both local and global dynamics of a bidirectional dc-dc boost converter supplying a constant power load (CPL) with a stabilizing resistor inserted in series with the main inductor. Numerical simulations performed on the averaged model of the system show interesting bifurcation phenomena explaining its local and global dynamical behavior. In particular, it is shown that in some parametric region, the system has two coexisting equilibria, one of them being a saddle and the other one an anti-saddle. The latter can be stable or unstable. An unstable limit cycle also coexists with the stable anti-saddle equilibrium. This limit cycle disappears through a homoclinic bifurcation. Moreover, a parameter space reduction is carried out by choosing suitable bifurcation parameters, and the normal form of the Bogdanov-Takens bifurcation is obtained hence mathematically demonstrating its existence. Finally, the analytical and simulation results on the switched model are partially validated by experimental measurements from a laboratory prototype.
- 10 October 2025
- Published by World Scientific Pub Co Pte Ltd in International Journal of Bifurcation and Chaos
- Vol. 35 (16)
Nonlinear Dynamics and Global Bifurcations in a Fixed Duty Ratio DC–DC Boost Switching Converter with a CPL
Cascaded DC–DC converters with source and load converters as their first and last stages are used in wide-ranging applications. Under certain conditions, the load converter behaves as a Constant Power Load (CPL) for the source converter. Due to the negative incremental resistance characteristic of the CPL, the system shows instability. One way to overcome this problem is to add a Loss-free Resistor (LFR) in series with the inductor of the source converter that stabilizes the system without losing global efficiency. Using an averaged model, this paper presents a dynamical analysis of a fixed duty ratio (open-loop) DC–DC boost converter, incorporating such a stabilizing resistor and a CPL. Fold and Hopf bifurcations associated with existence and stability of equilibria are found and the region covered by the basin of attraction of the stable equilibrium is examined. The criteria for choosing the system parameters are exposed accounting for steady-state stability and transient conditions. The analysis is performed first for a bidirectional boost converter admitting only Continuous Conduction Mode (CCM) operation and then extended to a unidirectional boost converter where both CCM and Discontinuous Conduction Mode (DCM) can take place. Theoretical predictions are validated by numerical simulations and experimental measurements.
- 10 October 2025
- Published by World Scientific Pub Co Pte Ltd in International Journal of Bifurcation and Chaos
- Vol. 35 (16)
Nonlinear Dynamics and Global Bifurcations in a Fixed Duty Ratio DC–DC Boost Switching Converter with a CPL
Cascaded DC–DC converters with source and load converters as their first and last stages are used in wide-ranging applications. Under certain conditions, the load converter behaves as a Constant Power Load (CPL) for the source converter. Due to the negative incremental resistance characteristic of the CPL, the system shows instability. One way to overcome this problem is to add a Loss-free Resistor (LFR) in series with the inductor of the source converter that stabilizes the system without losing global efficiency. Using an averaged model, this paper presents a dynamical analysis of a fixed duty ratio (open-loop) DC–DC boost converter, incorporating such a stabilizing resistor and a CPL. Fold and Hopf bifurcations associated with existence and stability of equilibria are found and the region covered by the basin of attraction of the stable equilibrium is examined. The criteria for choosing the system parameters are exposed accounting for steady-state stability and transient conditions. The analysis is performed first for a bidirectional boost converter admitting only Continuous Conduction Mode (CCM) operation and then extended to a unidirectional boost converter where both CCM and Discontinuous Conduction Mode (DCM) can take place. Theoretical predictions are validated by numerical simulations and experimental measurements.
- Open Access
- 30 March 2023
- Published by World Scientific Pub Co Pte Ltd in International Journal of Bifurcation and Chaos
- Vol. 33 (04)
In-Depth Analysis of Smooth and Nonsmooth Bifurcations for an Open-Loop Boost Converter Feeding Constant Power Loads in Discontinuous Conduction Mode
This paper presents a study of the existence conditions of limit cycles and mechanisms when losing their stability in an open-loop DC–DC boost converter loaded with a constant power load and operating in discontinuous conduction mode. First, the existence conditions are determined. Then, boundaries associated with different kinds of instabilities such as the classical smooth fold and period-doubling bifurcations and nonsmooth border-collision bifurcations such as fold border-collision bifurcations are elucidated. To perform the stability analysis, an implicit 1D map for the system is derived. From this model, it is obtained that smooth period-doubling and fold bifurcations may occur at certain values of the circuit parameters. Some results from numerical simulations performed on the circuit-based switched model are provided showing consistency with the theoretical analysis from the derived model.
- 30 March 2023
- Published by World Scientific Pub Co Pte Ltd in International Journal of Bifurcation and Chaos
- Vol. 33 (04)
Open AccessIn-Depth Analysis of Smooth and Nonsmooth Bifurcations for an Open-Loop Boost Converter Feeding Constant Power Loads in Discontinuous Conduction Mode
This paper presents a study of the existence conditions of limit cycles and mechanisms when losing their stability in an open-loop DC–DC boost converter loaded with a constant power load and operating in discontinuous conduction mode. First, the existence conditions are determined. Then, boundaries associated with different kinds of instabilities such as the classical smooth fold and period-doubling bifurcations and nonsmooth border-collision bifurcations such as fold border-collision bifurcations are elucidated. To perform the stability analysis, an implicit 1D map for the system is derived. From this model, it is obtained that smooth period-doubling and fold bifurcations may occur at certain values of the circuit parameters. Some results from numerical simulations performed on the circuit-based switched model are provided showing consistency with the theoretical analysis from the derived model.
- Open Access
- 1 January 2019
- Published by Institute of Electronics, Information and Communications Engineers (IEICE) in Nonlinear Theory and Its Applications, IEICE
- Vol. 10 (4) , 337-356
Delay effects on the limit cycling behavior in resonant inverters with state feedback
Bifurcations of limit cycles in an H-bridge LC resonant inverter are reexamined taking into account a time delay in the switching transition. The analysis is accomplished by means of a model of the inverter that compresses, in only three parameters, all the elements associated to both series and parallel topologies of the inverter, to the parasitic effects, to the state feedback control, and to the switching time delay. Emphasis is made in the deviation of preexisting bifurcations without delay and the new ones arising when the time delay is taken into account. It is shown from the analysis and numerical simulations that the delay can degrade the quality of oscillations and even inhibit them, but it is also demonstrated that to some extent, this drawback can be compensated by an appropriate state feedback.
- 1 January 2019
- Published by Institute of Electronics, Information and Communications Engineers (IEICE) in Nonlinear Theory and Its Applications, IEICE
- Vol. 10 (4) , 337-356
Open AccessDelay effects on the limit cycling behavior in resonant inverters with state feedback
Bifurcations of limit cycles in an H-bridge LC resonant inverter are reexamined taking into account a time delay in the switching transition. The analysis is accomplished by means of a model of the inverter that compresses, in only three parameters, all the elements associated to both series and parallel topologies of the inverter, to the parasitic effects, to the state feedback control, and to the switching time delay. Emphasis is made in the deviation of preexisting bifurcations without delay and the new ones arising when the time delay is taken into account. It is shown from the analysis and numerical simulations that the delay can degrade the quality of oscillations and even inhibit them, but it is also demonstrated that to some extent, this drawback can be compensated by an appropriate state feedback.
- 14 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 66 (4) , 1657-1667
Nonlinear Dynamic Modeling and Analysis of Self-Oscillating H-Bridge Parallel Resonant Converter Under Zero Current Switching Control: Unveiling Coexistence of Attractors
This paper deals with the global dynamical analysis of an H-bridge parallel resonant converter under a zero current switching control. Due to the discontinuity of the vector field in this system, sliding dynamics may take place. Here, the sliding set is found to be an escaping region. Different tools are combined for studying the stability of oscillations of the system. The desired crossing limit cycles are computed by solving their initial value problem and their stability analysis is performed using Floquet theory. The resulting monodromy matrix reveals that these cycles are created according to a smooth cyclic-fold bifurcation. Under parameter variation, an unstable symmetric crossing limit cycle undergoes a crossing-sliding bifurcation leading to the creation of a symmetric unstable sliding limit cycle. Finally, this limit cycle undergoes a double homoclinic connection giving rise to two different unstable asymmetric sliding limit cycles. The analysis is performed using a piecewise-smooth dynamical model of a Filippov type. Sliding limit cycles divide the state plane in three basins of attraction, and hence, different steady-state solutions may coexist which may lead the system to start-up problems. Numerical simulations corroborate the theoretical predictions, which have been experimentally validated.
- 14 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 66 (4) , 1657-1667
Nonlinear Dynamic Modeling and Analysis of Self-Oscillating H-Bridge Parallel Resonant Converter Under Zero Current Switching Control: Unveiling Coexistence of Attractors
This paper deals with the global dynamical analysis of an H-bridge parallel resonant converter under a zero current switching control. Due to the discontinuity of the vector field in this system, sliding dynamics may take place. Here, the sliding set is found to be an escaping region. Different tools are combined for studying the stability of oscillations of the system. The desired crossing limit cycles are computed by solving their initial value problem and their stability analysis is performed using Floquet theory. The resulting monodromy matrix reveals that these cycles are created according to a smooth cyclic-fold bifurcation. Under parameter variation, an unstable symmetric crossing limit cycle undergoes a crossing-sliding bifurcation leading to the creation of a symmetric unstable sliding limit cycle. Finally, this limit cycle undergoes a double homoclinic connection giving rise to two different unstable asymmetric sliding limit cycles. The analysis is performed using a piecewise-smooth dynamical model of a Filippov type. Sliding limit cycles divide the state plane in three basins of attraction, and hence, different steady-state solutions may coexist which may lead the system to start-up problems. Numerical simulations corroborate the theoretical predictions, which have been experimentally validated.
- 8 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 66 (4) , 692-696
Suppression of Undesired Attractors in a Self-Oscillating H-Bridge Parallel Resonant Converters Under Zero Current Switching Control
- 8 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 66 (4) , 692-696
Suppression of Undesired Attractors in a Self-Oscillating H-Bridge Parallel Resonant Converters Under Zero Current Switching Control
- 22 November 2017
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 91 (2) , 1145-1161
Limit cycle bifurcations in resonant LC power inverters under zero current switching strategy
- 22 November 2017
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 91 (2) , 1145-1161
Limit cycle bifurcations in resonant LC power inverters under zero current switching strategy
- 1 March 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 122-127
Sliding bifurcations in resonant inverters
In this paper, the switching dynamics of a dc-ac resonant self-oscillating inverter is considered. Using bifurcation analysis coexisting steady-state solutions are predicted, which are increasingly relevant for low values of the quality factor of the resonant circuit. A repelling sliding region is found to be connected with the two unstable limit cycles that split the phase plane in three basins of attraction. Simulation results obtained from the switched model confirm the theoretical derivations.
- 1 March 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 122-127
Sliding bifurcations in resonant inverters
In this paper, the switching dynamics of a dc-ac resonant self-oscillating inverter is considered. Using bifurcation analysis coexisting steady-state solutions are predicted, which are increasingly relevant for low values of the quality factor of the resonant circuit. A repelling sliding region is found to be connected with the two unstable limit cycles that split the phase plane in three basins of attraction. Simulation results obtained from the switched model confirm the theoretical derivations.
- 1 November 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 1553572X,p. 8385-8390
Sliding mode control of interconnected power electronic converters in DC microgrids
In this work, a typical structure of cascaded converters present in DC microgrids is analyzed. From the control point of view, converters acting as loads add a nonlinear effect to the supply bus, caused by its constant power load behavior. A realistic analysis of the equivalent load is presented. The open loop dynamics of the system is discussed, taking into account the equivalent load profile. A nonlinear sliding mode controller based on a proportional-integral controller is proposed to regulate the bus voltage under unknown load variations. The proposed methodology is validated trough simulation and experimental results.
- 1 November 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 1553572X,p. 8385-8390
Sliding mode control of interconnected power electronic converters in DC microgrids
In this work, a typical structure of cascaded converters present in DC microgrids is analyzed. From the control point of view, converters acting as loads add a nonlinear effect to the supply bus, caused by its constant power load behavior. A realistic analysis of the equivalent load is presented. The open loop dynamics of the system is discussed, taking into account the equivalent load profile. A nonlinear sliding mode controller based on a proportional-integral controller is proposed to regulate the bus voltage under unknown load variations. The proposed methodology is validated trough simulation and experimental results.
- 1 March 2013
- Published by World Scientific Pub Co Pte Ltd in International Journal of Bifurcation and Chaos
- Vol. 23 (03)
UNFOLDING NONSMOOTH BIFURCATION PATTERNS IN A 1-D PWL MAP AS A MODEL OF A SINGLE-INDUCTOR TWO-OUTPUT DC–DC SWITCHING CONVERTER
A piecewise linear (PWL) continuous map is used to analyze the nonsmooth bifurcation phenomena in a single-inductor two-output (SITO) DC–DC converter under a PWM interleaved control scheme. This map models the dynamical behavior of the converter when the waveforms of the inductor current can be approximated by straight lines during each switching subinterval. The parameter space is constrained by the interleaving control and the physical restriction on the values of some parameters. The main focus of this paper is on the existence and stability conditions of the rich variety of k-periodic orbits and the different bifurcation patterns that can be exhibited in this system. The analytical results in the form of 1-D and 2-D bifurcation diagrams are compared with numerical simulations obtained from the circuit-based switched model getting a good agreement between the two approaches.
- 1 March 2013
- Published by World Scientific Pub Co Pte Ltd in International Journal of Bifurcation and Chaos
- Vol. 23 (03)
UNFOLDING NONSMOOTH BIFURCATION PATTERNS IN A 1-D PWL MAP AS A MODEL OF A SINGLE-INDUCTOR TWO-OUTPUT DC–DC SWITCHING CONVERTER
A piecewise linear (PWL) continuous map is used to analyze the nonsmooth bifurcation phenomena in a single-inductor two-output (SITO) DC–DC converter under a PWM interleaved control scheme. This map models the dynamical behavior of the converter when the waveforms of the inductor current can be approximated by straight lines during each switching subinterval. The parameter space is constrained by the interleaving control and the physical restriction on the values of some parameters. The main focus of this paper is on the existence and stability conditions of the rich variety of k-periodic orbits and the different bifurcation patterns that can be exhibited in this system. The analytical results in the form of 1-D and 2-D bifurcation diagrams are compared with numerical simulations obtained from the circuit-based switched model getting a good agreement between the two approaches.