Adrian Simon Losko
Research Subjects
Adrian Simon Losko has a total of 83 co-authors. Here are the top co-authors by number of shared publications:
- Alexander Wolfertz
Forschungs-Neutronenquelle Heinz Maier-Leibnitz, 85748 Garching, Germany
3 shared publications Anton S. Tremsin
2 shared publicationsManuel Morgano
2 shared publications- Sven C. Vogel
Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos, NM, USA
2 shared publications - Thawatchart Chulapakorn
Uppsala University, Department of Physics and Astronomy, P.O. Box 516, 751 20 Uppsala, Sweden
2 shared publications A. S. Tremsin
Space Sciences Laboratory, University of California at Berkeley, Berkeley, USA
1 shared publication
Latest Publications
- Open Access
- 22 October 2026
- Published by International Union of Crystallography (IUCr) in IUCrJ
- Vol. 13 (6) , 784-806
Quantification in wavelength-resolved neutron imaging: exemplified using polyethylene to mimic hydrogen in stainless steel
We present a systematic and improved quantitative methodology for analysing wavelength-resolved neutron transmission spectra in metallic alloys. The approach is demonstrated using data acquired on both the IMAT beamline at ISIS and the RADEN beamline at J-PARC on Super Duplex stainless steel samples partially covered with thin polyethylene layers to mimic small controlled hydrogen concentrations. Initially, we employed Monte Carlo particle transport simulations to assess the effect of forward-scattered neutrons on the recorded transmission signal as a function of sample-to-detector distance and neutron beam size. Guided by this simulation framework, we define an experimental configuration and data processing workflow that enables the reliable quantification of very small transmission differences, reaching the sub-percent regime. An NCrystal -based least-squares fitting routine is developed to resolve multiple microstructural parameters simultaneously, including unit-cell parameters, phase fractions, element composition and extinction-related parameters. The model quantitatively reproduces the experimental transmission spectra and determines polyethylene layer thicknesses with micrometre-level precision. This work establishes a robust microstructure-sensitive framework for quantitative neutron transmission analysis. The approach enables the quantification of trace elements that produce measurable contrasts in neutron transmission, exemplified here for hydrogen in steel with a demonstrated detection limit of 10 wt p.p.m. The presented workflow provides a broadly applicable framework for improving quantitative neutron imaging across diverse materials and applications.
- 22 October 2026
- Published by International Union of Crystallography (IUCr) in IUCrJ
- Vol. 13 (6) , 784-806
Open AccessQuantification in wavelength-resolved neutron imaging: exemplified using polyethylene to mimic hydrogen in stainless steel
We present a systematic and improved quantitative methodology for analysing wavelength-resolved neutron transmission spectra in metallic alloys. The approach is demonstrated using data acquired on both the IMAT beamline at ISIS and the RADEN beamline at J-PARC on Super Duplex stainless steel samples partially covered with thin polyethylene layers to mimic small controlled hydrogen concentrations. Initially, we employed Monte Carlo particle transport simulations to assess the effect of forward-scattered neutrons on the recorded transmission signal as a function of sample-to-detector distance and neutron beam size. Guided by this simulation framework, we define an experimental configuration and data processing workflow that enables the reliable quantification of very small transmission differences, reaching the sub-percent regime. An NCrystal -based least-squares fitting routine is developed to resolve multiple microstructural parameters simultaneously, including unit-cell parameters, phase fractions, element composition and extinction-related parameters. The model quantitatively reproduces the experimental transmission spectra and determines polyethylene layer thicknesses with micrometre-level precision. This work establishes a robust microstructure-sensitive framework for quantitative neutron transmission analysis. The approach enables the quantification of trace elements that produce measurable contrasts in neutron transmission, exemplified here for hydrogen in steel with a demonstrated detection limit of 10 wt p.p.m. The presented workflow provides a broadly applicable framework for improving quantitative neutron imaging across diverse materials and applications.
- Open Access
- 6 February 2025
- Published by Elsevier in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
- Vol. 1073
Exploring spatial resolution enhancements on IMAT for steel corrosion studies
- 6 February 2025
- Published by Elsevier in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
- Vol. 1073
Open AccessExploring spatial resolution enhancements on IMAT for steel corrosion studies
- Open Access
- 11 July 2024
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 57 (4) , 1107-1114
Demonstration of neutron time-of-flight diffraction with an event-mode imaging detector
Neutron diffraction beamlines have traditionally relied on deploying large detector arrays of 3 He tubes or neutron-sensitive scintillators coupled with photomultipliers to efficiently probe crystallographic and microstructure information of a given material. Given the large upfront cost of custom-made data acquisition systems and the recent scarcity of 3 He, new diffraction beamlines or upgrades to existing ones demand innovative approaches. This paper introduces a novel Timepix3-based event-mode imaging neutron diffraction detector system as well as first results of a silicon powder diffraction measurement made at the HIPPO neutron powder diffractometer at the Los Alamos Neutron Science Center. Notably, these initial measurements were conducted simultaneously with the 3 He array on HIPPO, enabling direct comparison. Data reduction for this type of data was implemented in the MAUD code, enabling Rietveld analysis. Results from the Timepix3-based setup and HIPPO were benchmarked against McStas simulations, showing good agreement for peak resolution. With further development, systems such as the one presented here may substantially reduce the cost of detector systems for new neutron instrumentation as well as for upgrades of existing beamlines.
- 11 July 2024
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 57 (4) , 1107-1114
Open AccessDemonstration of neutron time-of-flight diffraction with an event-mode imaging detector
Neutron diffraction beamlines have traditionally relied on deploying large detector arrays of 3 He tubes or neutron-sensitive scintillators coupled with photomultipliers to efficiently probe crystallographic and microstructure information of a given material. Given the large upfront cost of custom-made data acquisition systems and the recent scarcity of 3 He, new diffraction beamlines or upgrades to existing ones demand innovative approaches. This paper introduces a novel Timepix3-based event-mode imaging neutron diffraction detector system as well as first results of a silicon powder diffraction measurement made at the HIPPO neutron powder diffractometer at the Los Alamos Neutron Science Center. Notably, these initial measurements were conducted simultaneously with the 3 He array on HIPPO, enabling direct comparison. Data reduction for this type of data was implemented in the MAUD code, enabling Rietveld analysis. Results from the Timepix3-based setup and HIPPO were benchmarked against McStas simulations, showing good agreement for peak resolution. With further development, systems such as the one presented here may substantially reduce the cost of detector systems for new neutron instrumentation as well as for upgrades of existing beamlines.
- Open Access
- 17 November 2023
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-9
Gamma In Addition to Neutron Tomography (GIANT) at the NECTAR instrument
The NECTAR instrument provides access to thermal and fast neutrons which are suitable for non-destructive inspection of large and dense objects. Scintillators are used in combination with a camera system for radiography and tomography. Gamma-rays are produced as inevitable by-products of the neutron production. Furthermore, these gamma-rays are highly directional due to their constraint to the same beam-line geometry and come with similar divergence as the neutrons. We demonstrate how these gamma-rays, previously treated as beam contamination can be used as a complementary probe. While difficult to shield, it is possible to utilize them by using gamma sensitive scintillator screens in place of the neutron sensitive scintillators, viewed by the same camera based detector system. The combination of multiple probes often provides complementary information that can result in a better contrast or insight into the sample composition, for a broader range of materials and applications. Hence dual-mode imaging, combining thermal/cold neutrons with X-ray imaging has been developed at many neutron facilities. With X-rays limited in penetration of dense materials to millimeters only, we present a multimodal imaging technique that is capable of penetrating cm-sized objects using thermal to fast neutrons with the addition of gamma-rays by changing the combination of scintillator and beam filter used at the NECTAR instrument.
- 17 November 2023
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-9
Open AccessGamma In Addition to Neutron Tomography (GIANT) at the NECTAR instrument
The NECTAR instrument provides access to thermal and fast neutrons which are suitable for non-destructive inspection of large and dense objects. Scintillators are used in combination with a camera system for radiography and tomography. Gamma-rays are produced as inevitable by-products of the neutron production. Furthermore, these gamma-rays are highly directional due to their constraint to the same beam-line geometry and come with similar divergence as the neutrons. We demonstrate how these gamma-rays, previously treated as beam contamination can be used as a complementary probe. While difficult to shield, it is possible to utilize them by using gamma sensitive scintillator screens in place of the neutron sensitive scintillators, viewed by the same camera based detector system. The combination of multiple probes often provides complementary information that can result in a better contrast or insight into the sample composition, for a broader range of materials and applications. Hence dual-mode imaging, combining thermal/cold neutrons with X-ray imaging has been developed at many neutron facilities. With X-rays limited in penetration of dense materials to millimeters only, we present a multimodal imaging technique that is capable of penetrating cm-sized objects using thermal to fast neutrons with the addition of gamma-rays by changing the combination of scintillator and beam filter used at the NECTAR instrument.
- 1 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 70 (7) , 1413-1415
Studies of Physical Processes in Scintillator Materials Using Event-Based Cameras
Fast-timing, event-based camera systems offer a novel approach for scintillator-based applications such as, radiographic imaging, spectroscopy, and scintillator characterization. While scintillator output detected by photomultiplier tubes allows for pulse shape discrimination, event-based cameras can capture both the spatial and temporal information of emission light from scintillators induced by particle interactions, thus enabling further discrimination and offer superior resolution of the detection of the initial event. Simulation codes that are capable of tracking, can provide detailed spatial and timing information for particles and secondaries. Measurement data from demonstration experiments have been collected and compared with simulation data to provide information about scintillators.
- 1 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 70 (7) , 1413-1415
Studies of Physical Processes in Scintillator Materials Using Event-Based Cameras
Fast-timing, event-based camera systems offer a novel approach for scintillator-based applications such as, radiographic imaging, spectroscopy, and scintillator characterization. While scintillator output detected by photomultiplier tubes allows for pulse shape discrimination, event-based cameras can capture both the spatial and temporal information of emission light from scintillators induced by particle interactions, thus enabling further discrimination and offer superior resolution of the detection of the initial event. Simulation codes that are capable of tracking, can provide detailed spatial and timing information for particles and secondaries. Measurement data from demonstration experiments have been collected and compared with simulation data to provide information about scintillators.
- Open Access
- 22 April 2022
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-7
3D isotope density measurements by energy-resolved neutron imaging
Tools for three-dimensional elemental characterization are available on length scales ranging from individual atoms, using electrons as a probe, to micrometers with X-rays. However, for larger volumes up to millimeters or centimeters, quantitative measurements of elemental or isotope densities were hitherto only possible on the surface. Here, a novel quantitative elemental characterization method based on energy-resolved neutron imaging, utilizing the known neutron absorption cross sections with their ‘finger-print’ absorption resonance signatures, is demonstrated. Enabled by a pixilated time-of-flight neutron transmission detector installed at an intense short-pulsed spallation neutron source, for this demonstration 3.25 million state-of-the-art nuclear physics neutron transmission analyses were conducted to derive isotopic densities for five isotopes in 3D in a volume of 0.25 cm3. The tomographic reconstruction of the isotope densities provides elemental maps similar to X-ray microprobe maps for any cross section in the probed volume. The bulk isotopic density of a U-20Pu-10Zr-3Np-2Am nuclear transmutation fuel sample was measured, agrees well with mass-spectrometry and is evidence of the accuracy of the method.
- 22 April 2022
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-7
Open Access3D isotope density measurements by energy-resolved neutron imaging
Tools for three-dimensional elemental characterization are available on length scales ranging from individual atoms, using electrons as a probe, to micrometers with X-rays. However, for larger volumes up to millimeters or centimeters, quantitative measurements of elemental or isotope densities were hitherto only possible on the surface. Here, a novel quantitative elemental characterization method based on energy-resolved neutron imaging, utilizing the known neutron absorption cross sections with their ‘finger-print’ absorption resonance signatures, is demonstrated. Enabled by a pixilated time-of-flight neutron transmission detector installed at an intense short-pulsed spallation neutron source, for this demonstration 3.25 million state-of-the-art nuclear physics neutron transmission analyses were conducted to derive isotopic densities for five isotopes in 3D in a volume of 0.25 cm3. The tomographic reconstruction of the isotope densities provides elemental maps similar to X-ray microprobe maps for any cross section in the probed volume. The bulk isotopic density of a U-20Pu-10Zr-3Np-2Am nuclear transmutation fuel sample was measured, agrees well with mass-spectrometry and is evidence of the accuracy of the method.
- Open Access
- 1 April 2022
- Published by MDPI AG in Quantum Beam Science
- Vol. 6 (2) , 14
Fast Neutron Scintillator Screens for Neutron Imaging Using a Layered Polymer-Phosphor Architecture
Fast neutrons enable a nondestructive examination of dense, large, and highly attenuating samples due to their lower interaction probability compared to thermal neutrons. However, this also creates a challenge in fast neutron imaging, as the thicker sensors necessary to detect fast neutrons degrade an image’s spatial resolution due to scattering within the sensor and the indeterminate depth of interaction in the sensor. This work explores the advantages of a fast neutron imaging screen with a layered polymer-phosphor screen approach as opposed to a mixed polymer-phosphor screen typically used in fast neutron imaging. Proton recoil is the primary conversion mechanism for fast neutron imaging. Simulations showed that the recoil proton range of typical fast neutrons is approximately 200 µm, however, tests at Idaho National Laboratory revealed that the light output of these screens increased at much greater polymer thicknesses. The NECTAR fast neutron beamline at FRM II was used to test the imaging performance of layered fast neutron imaging screens. Distinguishing between the fast-neutron and γ-ray signals is a major challenge in fast neutron imaging because all fast neutron sources also produce γ-rays. A relative comparison between a control plate and the fast neutron screen was made to distinguish between a γ-ray and fast neutron signals. MCNP modeling quantified the γ-ray and fast neutron contributions to the images measured at NECTAR, which were approximately a 75% γ-ray image.
- 1 April 2022
- Published by MDPI AG in Quantum Beam Science
- Vol. 6 (2) , 14
Open AccessFast Neutron Scintillator Screens for Neutron Imaging Using a Layered Polymer-Phosphor Architecture
Fast neutrons enable a nondestructive examination of dense, large, and highly attenuating samples due to their lower interaction probability compared to thermal neutrons. However, this also creates a challenge in fast neutron imaging, as the thicker sensors necessary to detect fast neutrons degrade an image’s spatial resolution due to scattering within the sensor and the indeterminate depth of interaction in the sensor. This work explores the advantages of a fast neutron imaging screen with a layered polymer-phosphor screen approach as opposed to a mixed polymer-phosphor screen typically used in fast neutron imaging. Proton recoil is the primary conversion mechanism for fast neutron imaging. Simulations showed that the recoil proton range of typical fast neutrons is approximately 200 µm, however, tests at Idaho National Laboratory revealed that the light output of these screens increased at much greater polymer thicknesses. The NECTAR fast neutron beamline at FRM II was used to test the imaging performance of layered fast neutron imaging screens. Distinguishing between the fast-neutron and γ-ray signals is a major challenge in fast neutron imaging because all fast neutron sources also produce γ-rays. A relative comparison between a control plate and the fast neutron screen was made to distinguish between a γ-ray and fast neutron signals. MCNP modeling quantified the γ-ray and fast neutron contributions to the images measured at NECTAR, which were approximately a 75% γ-ray image.
- Open Access
- 1 November 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-11
New perspectives for neutron imaging through advanced event-mode data acquisition
Imaging using scintillators is a widespread and cost-effective approach in radiography. While different types of scintillator and sensor configurations exist, it can be stated that the detection efficiency and resolution of a scintillator-based system strongly depend on the scintillator material and its thickness. Recently developed event-driven detectors are capable of registering spots of light emitted by the scintillator after a particle interaction, allowing to reconstruct the Center-of-Mass of the interaction within the scintillator. This results in a more precise location of the event and therefore provides a pathway to overcome the scintillator thickness limitation and increase the effective spatial resolution of the system. Utilizing this principle, we present a detector capable of Time-of-Flight imaging with an adjustable field-of-view, ad-hoc binning and re-binning of data based on the requirements of the experiment including the possibility of particle discrimination via the analysis of the event shape in space and time. It is considered that this novel concept might replace regular cameras in neutron imaging detectors as it provides superior detection capabilities with the most recent results providing an increase by a factor 3 in image resolution and an increase by up to a factor of 7.5 in signal-to-noise for thermal neutron imaging.
- 1 November 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-11
Open AccessNew perspectives for neutron imaging through advanced event-mode data acquisition
Imaging using scintillators is a widespread and cost-effective approach in radiography. While different types of scintillator and sensor configurations exist, it can be stated that the detection efficiency and resolution of a scintillator-based system strongly depend on the scintillator material and its thickness. Recently developed event-driven detectors are capable of registering spots of light emitted by the scintillator after a particle interaction, allowing to reconstruct the Center-of-Mass of the interaction within the scintillator. This results in a more precise location of the event and therefore provides a pathway to overcome the scintillator thickness limitation and increase the effective spatial resolution of the system. Utilizing this principle, we present a detector capable of Time-of-Flight imaging with an adjustable field-of-view, ad-hoc binning and re-binning of data based on the requirements of the experiment including the possibility of particle discrimination via the analysis of the event shape in space and time. It is considered that this novel concept might replace regular cameras in neutron imaging detectors as it provides superior detection capabilities with the most recent results providing an increase by a factor 3 in image resolution and an increase by up to a factor of 7.5 in signal-to-noise for thermal neutron imaging.
- Open Access
- 3 March 2021
- Published by Springer Nature in Research Square
Event-Mode Neutron Imaging Using the TPX3Cam - Breaking the Boundaries of Conventional Neutron Imaging Techniques
Imaging using scintillators is a widespread and cost-effective approach in radiography. While different types of scintillator and sensor configurations exist, it can be stated that the detection efficiency and resolution of a scintillator-based system is strongly depended on the scintillator material and its thickness. Recently developed event-driven detectors are capable of observing spots of light emitted by the scintillator after a particle interaction, allowing to reconstruct the Center-of-Mass of the interaction on the scintillator surface. This results in a more precise location of the event and therefore provides a pathway to overcome the scintillator thickness limitation and increase the effective spatial resolution of the system. Utilizing this principle, we present a detector capable of Time-of-Flight imaging with a flexible field-of-view, ad-hoc binning and re-binning of data based on the requirements of the experiment including the possibility of particle discrimination via the analysis of the event shape in space and time. It is considered that this novel concept might replace regular cameras in neutron imaging detectors as it provides superior detection capabilities with the most recent results providing an increase by a factor 3 in image resolution and an increase by up to a factor of 7.5 in signal-to-noise for thermal neutron imaging.
- 3 March 2021
- Published by Springer Nature in Research Square
Open AccessEvent-Mode Neutron Imaging Using the TPX3Cam - Breaking the Boundaries of Conventional Neutron Imaging Techniques
Imaging using scintillators is a widespread and cost-effective approach in radiography. While different types of scintillator and sensor configurations exist, it can be stated that the detection efficiency and resolution of a scintillator-based system is strongly depended on the scintillator material and its thickness. Recently developed event-driven detectors are capable of observing spots of light emitted by the scintillator after a particle interaction, allowing to reconstruct the Center-of-Mass of the interaction on the scintillator surface. This results in a more precise location of the event and therefore provides a pathway to overcome the scintillator thickness limitation and increase the effective spatial resolution of the system. Utilizing this principle, we present a detector capable of Time-of-Flight imaging with a flexible field-of-view, ad-hoc binning and re-binning of data based on the requirements of the experiment including the possibility of particle discrimination via the analysis of the event shape in space and time. It is considered that this novel concept might replace regular cameras in neutron imaging detectors as it provides superior detection capabilities with the most recent results providing an increase by a factor 3 in image resolution and an increase by up to a factor of 7.5 in signal-to-noise for thermal neutron imaging.
- 8 September 2020
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 14 (11) , 14686-14697
Fast Neutron Imaging with Semiconductor Nanocrystal Scintillators
Fast neutrons offer high penetration capabilities for both light and dense materials due to their comparatively low interaction cross sections, making them ideal for imaging of large-scale objects such as large fossils or as-built plane turbines, where X-rays or thermal neutrons do not provide sufficient penetration. However, inefficient fast neutron detection limits widespread application of this technique. Traditional phosphors such as ZnS:Cu embedded in plastics are utilized as scintillators in recoil proton detectors for fast neutron imaging. However, these scintillation plates exhibit significant light scattering due to the plastic-phosphor interface along with long-lived afterglow (on the order of minutes), and therefore alternative solutions are needed to increase the availability of this technique. Here, we utilize colloidal nanocrystals (NCs) in hydrogen-dense solvents for fast neutron imaging through the detection of recoil protons generated by neutron scattering, demonstrating the efficacy of nanomaterials as scintillators in this detection scheme. The light yield, spatial resolution, and neutron-vs.-gamma sensitivity of several chalcogenide (CdSe and CuInS2)-based and perovskite halide-based NCs are determined, with only a short-lived afterglow (below the order of seconds) observed for all of these NCs. FAPbBr3 NCs exhibit the brightest total light output at 19.3% of the commercial ZnS:Cu(PP) standard, while CsPbBrCl2:Mn NCs offer the best spatial resolution at ~2.6 mm. Colloidal NCs showed significantly lower gamma sensitivity than ZnS:Cu: for example, 79% of the FAPbBr3 light yield results from neutron-induced radioluminescence and hence the neutron-specific light yield of FAPbBr3 is 30.4% of that of ZnS:Cu(PP). Concentration and thickness-dependent measurements highlight the importance of increasing concentrations and reducing self-absorption, yielding design principles to optimize and foster an era of NC-based scintillators for fast neutron imaging.
- 8 September 2020
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 14 (11) , 14686-14697
Fast Neutron Imaging with Semiconductor Nanocrystal Scintillators
Fast neutrons offer high penetration capabilities for both light and dense materials due to their comparatively low interaction cross sections, making them ideal for imaging of large-scale objects such as large fossils or as-built plane turbines, where X-rays or thermal neutrons do not provide sufficient penetration. However, inefficient fast neutron detection limits widespread application of this technique. Traditional phosphors such as ZnS:Cu embedded in plastics are utilized as scintillators in recoil proton detectors for fast neutron imaging. However, these scintillation plates exhibit significant light scattering due to the plastic-phosphor interface along with long-lived afterglow (on the order of minutes), and therefore alternative solutions are needed to increase the availability of this technique. Here, we utilize colloidal nanocrystals (NCs) in hydrogen-dense solvents for fast neutron imaging through the detection of recoil protons generated by neutron scattering, demonstrating the efficacy of nanomaterials as scintillators in this detection scheme. The light yield, spatial resolution, and neutron-vs.-gamma sensitivity of several chalcogenide (CdSe and CuInS2)-based and perovskite halide-based NCs are determined, with only a short-lived afterglow (below the order of seconds) observed for all of these NCs. FAPbBr3 NCs exhibit the brightest total light output at 19.3% of the commercial ZnS:Cu(PP) standard, while CsPbBrCl2:Mn NCs offer the best spatial resolution at ~2.6 mm. Colloidal NCs showed significantly lower gamma sensitivity than ZnS:Cu: for example, 79% of the FAPbBr3 light yield results from neutron-induced radioluminescence and hence the neutron-specific light yield of FAPbBr3 is 30.4% of that of ZnS:Cu(PP). Concentration and thickness-dependent measurements highlight the importance of increasing concentrations and reducing self-absorption, yielding design principles to optimize and foster an era of NC-based scintillators for fast neutron imaging.