Karine Anselme

Musculoskeletal symptoms are frequently reported following silicone breast implantation. However, the biological mechanisms linking implant-derived silicone exposure to skeletal muscle alterations remain poorly understood, partly because the biological effects of silicone have long been debated in the context of its biocompatibility. Here, we chemically characterized the low-molecular-weight fraction of the breast implant silicone exposome, readily released from implant gel through “gel bleed”, and investigated its potential biological consequences using an integrated approach combining analytical chemistry, clinical transcriptomics and histology, and controlled in vitro muscle experiments. Transcriptomic analyses of periprosthetic tissues associated with silicone implant rupture revealed unexpected myogenic and neuromuscular signatures in tissue conventionally regarded as predominantly fibrous, together with alterations in lipid metabolism and transport. These findings were supported by histological evidence of close interactions between periprosthetic tissue and skeletal muscle. Chemical analysis of the implant-gel extract detected linear siloxane L2 and cyclic siloxanes D3–D8, with tentative assignment of D9. In vitro , C2C12 cells exposed to the implant-gel extract showed up to 30% reduced viability and decreased expression of key neuromyogenic genes. Together, these findings provide convergent chemical, clinical, and experimental evidence that low-molecular-weight constituents of the breast implant silicone exposome may constitute a biologically active exposure capable of affecting skeletal muscle. The associated alterations in lipid metabolism and transport further provide a mechanistic framework for investigating the cellular handling and potential tissue distribution of hydrophobic silicone-derived species. These findings position silicone gel bleed as a biologically relevant source of chemical exposure rather than solely a material-integrity phenomenon. Highlights: Histological analysis revealed skeletal muscle areas closely integrated with periprosthetic fibrotic tissue. Patient-derived RNA sequencing reveals that silicone exposure exerts biological effects beyond inflammation, directly impacting both myogenic and lipid pathways. A gel implant-conditioned medium, chemically characterized by GPC and GC-MS, was used as an in vitro silicone exposure model and revealed a heterogeneous LMWS profile comprising L2 and cyclic siloxanes D3–D8, with D9 tentatively identified. The viability of differentiating muscle cells in vitro is altered by up to 30% by implant-derived LMWS. Silicone exposure induces muscle transcriptomic alterations in vitro , recapitulating key RNA-sequencing signatures observed in patient tissues, even in the absence of an inflammatory environment RNA-seq analysis uncovered dysregulation of lipid metabolism genes, including key lipoprotein markers, suggesting that silicone exposure may disrupt endogenous lipid transport pathways in periprosthetic tissues. Graphical

Silicone breast implants have long been associated with the gradual release of low molecular weight siloxanes from the inner gel through the implant membrane into the periprosthetic biological environment, a phenomenon commonly referred to as “gel bleed.” Despite more than five decades of investigation spanning polymer science, transport theory, and biomedical research, the physicochemical mechanisms underlying silicone permeation remain conceptually fragmented. Here, we revisit silicone permeation by examining how molecular transport arises from the intrinsic interplay between polymer architecture, thermodynamic partitioning, and diffusional mobility within crosslinked networks. We further analyze the key determinants of permeation, including implant aging, barrier‐layer technologies, and interaction with the periprosthetic tissue environment. We further discuss how dynamic bio‐interfaces influence bidirectional transport and bioaccumulation in vivo. Beyond their implications for implant performance, these observations provide broader conceptual insights into mass transport in soft materials, highlighting general principles relevant to elastomers, hydrogels, and drug‐delivery systems. By integrating material structure, transport physics and host interactions, this review establishes a mechanistic viewpoint on polymer permeation in vivo and offers design considerations for next‐generation soft implantable biomaterials.

Cells dynamically integrate biochemical and mechanical signals arising from their surrounding microenvironment to regulate morphology and behavior. Mechanical cues like matrix stiffness, surface topography, and other physical perturbations modify biophysical signals. Surface topography, particularly curvature regime acts as any important mediator of mechanotransduction by coordinating cytoskeletal organization, focal adhesion dynamics, and nuclear architecture. Curvature response has been demonstrated at broader length scales and influences nucleus shape change, chromatin organization, and gene regulation, positioning the nucleus as an active mechanosensitive hub. Bone tissue consists of a curvature-rich microenvironment defined by a trabecular architecture at tissue scale and by resorption cavities such as Howship’s lacunae at cellular scale. While these geometries are essential for homeostasis, their role in pathological context remains poorly understood. Osteosarcoma develops within this mechanically complex multiscale architecture, but how bone-inspired curvature regulates nuclear behavior and signaling in osteosarcoma cells remains unclear. Here, we engineered three-dimensional (3D) concave hemispherical substrates that recapitulate nucleus-scale bone micro-curvature and assessed their effects on human SaOS-2 osteosarcoma cells. In comparison with flat surfaces, concave confinement resulted in pronounced nuclear rounding and softening, accompanied by Lamin A/C reorganization and increased heterochromatin compaction marked by H3K9me3. Curvature-driven nuclear remodeling selectively modulated Hippo pathway main effectors YAP/TAZ without activating NF-κB mediated canonical inflammatory responses. Furthermore, cells maintained overall viability without elevated pathological DNA damage or apoptotic signaling, suggesting an adaptive, damage-tolerant nuclear response. Overall, these findings indicate nucleus-scale curvature as a critical regulator within the bone microenvironment that governs nuclear modelling and mechanosensitive signaling in osteosarcoma cells. Incorporating physiologically relevant geometry into in vitro models establishes new insight into cancer microenvironment crosstalk and highlights nuclear interior and outer architecture as a key regulator of tumor cell behavior.

This study presents a robust methodology for analyzing 3D roughness parameters to characterize sandblasted surfaces, identifying the most relevant descriptors for process optimization. Sandblasting with irregularly shaped corundum particles is performed using five grit sizes (25, 50, 90, 125, and 250 µm) and three pressure levels (2, 3, and 4 bar). The resulting surfaces are characterized through eight 3D roughness parameters: Sa, Spc, Sal, Sfd, Sdq, Sdr, Spd, and Str. A linear model of the form Q = a + b.D + d.D.P, where Q represents the roughness parameter, D is the average grit size, and P is the sandblasting pressure, is employed. For Spd, a nonlinear model, Spd = (a + b.D + d.D.P)², yields a significantly improved determination coefficient, demonstrating the model’s enhanced ability to capture the complexity of the Spd parameter. The double-bootstrap analysis validates the statistical significance of all models, providing confidence intervals for each parameter. This approach emphasizes the importance of advanced 3D roughness descriptors for accurately analyzing surface textures in sandblasting processes, offering a reliable framework for surface characterization and industrial optimization.

Increased life expectancy in industrialized countries is causing an increased incidence of osteoporosis and the need for bioactive bone implants. The integration of implants can be improved physically, but mainly by chemical modifications of the material surface. It was recognized that amino-group-containing coatings improved cell attachment and intracellular signaling. The aim of this study was to determine the role of the amino group density in this positive cell behavior by developing controlled amino-rich nanolayers. This work used covalent grafting of polymer-based nanocoatings with different amino group densities. Titanium coated with the positively-charged trimethoxysilylpropyl modified poly(ethyleneimine) (Ti-TMS-PEI), which mostly improved cell area after 30 min, possessed the highest amino group density with an N/C of 32%. Interestingly, changes in adhesion-related genes on Ti-TMS-PEI could be seen after 4 h. The mRNA microarray data showed a premature transition of the MG-63 cells into the beginning differentiation phase after 24 h indicating Ti-TMS-PEI as a supportive factor for osseointegration. This amino-rich nanolayer also induced higher bovine serum albumin protein adsorption and caused the cells to migrate slower on the surface after a more extended period of cell settlement as an indication of a better surface anchorage. In conclusion, the cell spreading on amine-based nanocoatings correlated well with the amino group density (N/C).

Surface curvature both emerges from, and influences the behavior of, living objects at length scales ranging from cell membranes to single cells to tissues and organs. The relevance of surface curvature in biology is supported by numerous experimental and theoretical investigations in recent years. In this review, first, a brief introduction to the key ideas of surface curvature in the context of biological systems is given and the challenges that arise when measuring surface curvature are discussed. Giving an overview of the emergence of curvature in biological systems, its significance at different length scales becomes apparent. On the other hand, summarizing current findings also shows that both single cells and entire cell sheets, tissues or organisms respond to curvature by modulating their shape and their migration behavior. Finally, the interplay between the distribution of morphogens or micro‐organisms and the emergence of curvature across length scales is addressed with examples demonstrating these key mechanistic principles of morphogenesis. Overall, this review highlights that curved interfaces are not merely a passive by‐product of the chemical, biological, and mechanical processes but that curvature acts also as a signal that co‐determines these processes.

Random electrospun three-dimensional fiber membranes mimic the extracellular matrix and the interfibrillar spaces promotes the flow of nutrients for cells. Electrospun PLGA membranes were analyzed in vitro and in vivo after being sterilized with gamma radiation and bioactivated with fibronectin or collagen. Madin-Darby Canine Kidney (MDCK) epithelial cells and primary fibroblast-like cells from hamster’s cheek paunch proliferated over time on these membranes, evidencing their good biocompatibility. Cell-free irradiated PLGA membranes implanted on the back of hamsters resulted in a chronic granulomatous inflammatory response, observed after 7, 15, 30 and 90 days. Morphological analysis of implanted PLGA using light microscopy revealed epithelioid cells, Langhans type of multinucleate giant cells (LCs) and multinucleated giant cells (MNGCs) with internalized biomaterial. Lymphocytes increased along time due to undegraded polymer fragments, inducing the accumulation of cells of the phagocytic lineage, and decreased after 90 days post implantation. Myeloperoxidase⁺ cells increased after 15 days and decreased after 90 days. LCs, MNGCs and capillaries decreased after 90 days. Analysis of implanted PLGA after 7, 15, 30 and 90 days using transmission electron microscope (TEM) showed cells exhibiting internalized PLGA fragments and filopodia surrounding PLGA fragments. Over time, TEM analysis showed less PLGA fragments surrounded by cells without fibrous tissue formation. Accordingly, MNGC constituted a granulomatous reaction around the polymer, which resolves with time, probably preventing a fibrous capsule formation. Finally, this study confirms the biocompatibility of electrospun PLGA membranes and their potential to accelerate the healing process of oral ulcerations in hamsters’ model in association with autologous cells.

Many magnetotactic bacteria (MTB) biomineralize magnetite crystals that nucleate and grow inside intracellular membranous vesicles originating from invaginations of the cytoplasmic membrane. The crystals together with their surrounding membranes are referred to as magnetosomes. Magnetosome magnetite crystals nucleate and grow using iron transported inside the vesicle by specific proteins. Here, we tackle the question of the organization of magnetosomes, which are always described as constituted by linear chains of nanocrystals. In addition, it is commonly accepted that the iron oxide nanocrystals are in the magnetite-based phase. We show, in the case of a wild species of coccus-type bacterium, that there is a double organization of the magnetosomes, relatively perpendicular to each other, and that the nanocrystals are in fact maghemite. These findings were obtained, respectively, by using electron tomography of whole mounts of cells directly from the environment and high-resolution transmission electron microscopy and diffraction. Structure simulations were performed with the MacTempas software. This study opens new perspectives on the diversity of phenotypes within MTBs and allows to envisage other mechanisms of nucleation and formation of biogenic iron oxide crystals.