Ary Silva Maia
Research Subjects
Ary Silva Maia has a total of 87 co-authors. Here are the top co-authors by number of shared publications:
- Ieda Maria Garcia Santos
Universidade Federal da Paraíba
15 shared publications A. G. Souza
Laboratório de Combustíveis e Materiais/INCTMN – Departamento de Química, Universidade Federal da Paraíba, João Pessoa, Brazil
8 shared publications- Anderson Reis Albuquerque
Federal University of Rio Grande do Norte
6 shared publications - André Luiz Menezes de Oliveira
Universidade Federal da Paraíba
6 shared publications - Elson Longo
Federal University of Sao Carlos (UFSCar)
5 shared publications - Julio Ricardo Sambrano
São Paulo State University (UNESP)
5 shared publications
Latest Publications
- Open Access
- 25 May 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (22) , 12371-12386
Effect of Nb 5+ Doping on Structural, Electronic, and Antibacterial Properties of Hydroxyapatite
Herein, we address the limited understanding of how Nb5+ doping governs the defect chemistry and structural characteristics of hydroxyapatite (Hap) and demonstrate its use to tailor their functionalities. Niobium-doped Haps (HapNbx) were synthesized using the coprecipitation method, with Nb doping concentrations of x = 1, 3, 5, 7, and 10 mol %. The effect of dopant concentration on the structural and electronic properties of the samples was systematically investigated and correlated with their functionalities. Structural characterization and Rietveld refinements revealed that single-phase apatite-structured materials were obtained up to 7 mol % Nb, whereas phase segregation occurred at 10 mol %. Incorporation of Nb5+ into the Hap lattice was revealed by Raman, UV-vis, and XPS spectroscopic analyses and further confirmed by XANES spectroscopy at the P K edge and Nb L-edge. XPS analysis indicated the presence of this cationic species on the surface, and XANES probed the preferential coordination sites for Nb5+ cations. The antibacterial activity against Staphylococcus aureus and Escherichia coli was evaluated, and the sample containing 5 mol % Nb demonstrated a promising inhibitory effect. Our findings reveal that Nb5+ preferentially occupies the 7-coordinate Ca(II) sites in the Hap lattice, thereby modifying the structural and electronic properties of HapNbx compounds, affecting their biocidal function.
- 25 May 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (22) , 12371-12386
Open AccessEffect of Nb 5+ Doping on Structural, Electronic, and Antibacterial Properties of Hydroxyapatite
Herein, we address the limited understanding of how Nb5+ doping governs the defect chemistry and structural characteristics of hydroxyapatite (Hap) and demonstrate its use to tailor their functionalities. Niobium-doped Haps (HapNbx) were synthesized using the coprecipitation method, with Nb doping concentrations of x = 1, 3, 5, 7, and 10 mol %. The effect of dopant concentration on the structural and electronic properties of the samples was systematically investigated and correlated with their functionalities. Structural characterization and Rietveld refinements revealed that single-phase apatite-structured materials were obtained up to 7 mol % Nb, whereas phase segregation occurred at 10 mol %. Incorporation of Nb5+ into the Hap lattice was revealed by Raman, UV-vis, and XPS spectroscopic analyses and further confirmed by XANES spectroscopy at the P K edge and Nb L-edge. XPS analysis indicated the presence of this cationic species on the surface, and XANES probed the preferential coordination sites for Nb5+ cations. The antibacterial activity against Staphylococcus aureus and Escherichia coli was evaluated, and the sample containing 5 mol % Nb demonstrated a promising inhibitory effect. Our findings reveal that Nb5+ preferentially occupies the 7-coordinate Ca(II) sites in the Hap lattice, thereby modifying the structural and electronic properties of HapNbx compounds, affecting their biocidal function.
- Open Access
- 8 October 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (41) , 49158-49167
Exploring Symmetry-Independent Configurations in KTa0.5Nb0.5O3 Solid Solutions: A First-Principles, QTAIM, and AIMD Approach
Potassium tantaloniobate (KTN) is a lead-free perovskite solid solution with promising electro-optic, ferroelectric, and dielectric applications. Here, we present a systematic first-principles study of KTa0.5Nb0.5O3, exploring all 21 symmetry-independent configurations (SICs) in 2 × 2 × 2 cubic and tetragonal supercells. Configurational energy analysis identifies the most stable atomic arrangements, which are further characterized through band structure, density of states, and quantum theory of atoms in molecules (QTAIM) descriptors. Ab initio molecular dynamics (AIMD) simulations at finite temperature confirm the dynamical robustness of low-energy models and highlight subtle symmetry-dependent fluctuations. The results demonstrate how B-site ordering modulates electronic structure and bonding, offering guidance for the design of compositionally engineered perovskites for electro-optic and dielectric technologies.
- 8 October 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (41) , 49158-49167
Open AccessExploring Symmetry-Independent Configurations in KTa0.5Nb0.5O3 Solid Solutions: A First-Principles, QTAIM, and AIMD Approach
Potassium tantaloniobate (KTN) is a lead-free perovskite solid solution with promising electro-optic, ferroelectric, and dielectric applications. Here, we present a systematic first-principles study of KTa0.5Nb0.5O3, exploring all 21 symmetry-independent configurations (SICs) in 2 × 2 × 2 cubic and tetragonal supercells. Configurational energy analysis identifies the most stable atomic arrangements, which are further characterized through band structure, density of states, and quantum theory of atoms in molecules (QTAIM) descriptors. Ab initio molecular dynamics (AIMD) simulations at finite temperature confirm the dynamical robustness of low-energy models and highlight subtle symmetry-dependent fluctuations. The results demonstrate how B-site ordering modulates electronic structure and bonding, offering guidance for the design of compositionally engineered perovskites for electro-optic and dielectric technologies.
- Open Access
- 18 July 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
Vibrational Dynamics and Cation Mobility in the TTB Oxide K3Li2Nb5O15: A Combined Raman, AIMD, and QTAIM Study
The K 3 Li 2 Nb 5 O 15 (KLN) compound, which crystallizes in a tetragonal tungsten bronze (TTB) structure, was synthesized and structurally resolved by the Rietveld refinement of X-ray diffraction (XRD) data, followed by characterization via Raman spectroscopy and theoretical investigation through an integrated computational approach. Density functional theory (DFT) calculations, incorporating the quasi-harmonic approximation and topological analysis based on the quantum theory of atoms in molecules (QTAIM), were employed to interpret vibrational features and to establish the crystal and electronic structures. Theoretical and experimental Raman spectra were compared, revealing significant discrepancies below 400 cm –1 . These differences were attributed to the dynamic behavior of K + and Li + cations within the pentagonal and trigonal channels, respectively. Ab initio molecular dynamics simulations confirmed the high mobility of Li + and the site-dependent behavior of K + , which directly impact the vibrational signatures. The combined vibrational and dynamic analyses suggest that the observed oxygen mobility, particularly in the channel regions, may influence the formation and migration of oxygen vacancies, with possible implications for ionic conductivity, gas sensing, and (photo)catalytic activity in functional oxides. This study provides a detailed atomistic understanding of the coupling between structural dynamics and vibrational spectra in complex TTB frameworks, contributing to deeper insight into phenomena rarely explored at this level.
- 18 July 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
Open AccessVibrational Dynamics and Cation Mobility in the TTB Oxide K3Li2Nb5O15: A Combined Raman, AIMD, and QTAIM Study
The K 3 Li 2 Nb 5 O 15 (KLN) compound, which crystallizes in a tetragonal tungsten bronze (TTB) structure, was synthesized and structurally resolved by the Rietveld refinement of X-ray diffraction (XRD) data, followed by characterization via Raman spectroscopy and theoretical investigation through an integrated computational approach. Density functional theory (DFT) calculations, incorporating the quasi-harmonic approximation and topological analysis based on the quantum theory of atoms in molecules (QTAIM), were employed to interpret vibrational features and to establish the crystal and electronic structures. Theoretical and experimental Raman spectra were compared, revealing significant discrepancies below 400 cm –1 . These differences were attributed to the dynamic behavior of K + and Li + cations within the pentagonal and trigonal channels, respectively. Ab initio molecular dynamics simulations confirmed the high mobility of Li + and the site-dependent behavior of K + , which directly impact the vibrational signatures. The combined vibrational and dynamic analyses suggest that the observed oxygen mobility, particularly in the channel regions, may influence the formation and migration of oxygen vacancies, with possible implications for ionic conductivity, gas sensing, and (photo)catalytic activity in functional oxides. This study provides a detailed atomistic understanding of the coupling between structural dynamics and vibrational spectra in complex TTB frameworks, contributing to deeper insight into phenomena rarely explored at this level.
- Open Access
- 21 May 2024
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (9) , 4339-4353
α-MoO3 Micro- and Nanoparticles as Catalysts for Biofuel Production
- 21 May 2024
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (9) , 4339-4353
Open Accessα-MoO3 Micro- and Nanoparticles as Catalysts for Biofuel Production
- 28 September 2023
- Published by Elsevier in Materials Letters
- Vol. 353
A theoretical–experimental study of KSr2Nb(3-x)TaxO10 (x = 0,1,2) systems as photocatalysts
- 28 September 2023
- Published by Elsevier in Materials Letters
- Vol. 353
A theoretical–experimental study of KSr2Nb(3-x)TaxO10 (x = 0,1,2) systems as photocatalysts
- 23 March 2023
- Published by American Chemical Society (ACS) in Journal of Chemical Information and Modeling
- Vol. 63 (7) , 1999-2013
TopIso3D Viewer: Enhancing Topological Analysis through 3D Isosurfaces
We present TopIso3DViewer, a software with a user-friendly graphical interface, that generates three-dimensional maps to analyze descriptors based on the Quantum Theory of Atoms in Molecules (QTAIM), applied in periodic and nonperiodic systems. The software also automates the launching of topological analysis calculations through the Topond package and generates a report that facilitates the identification of the values of the calculated descriptors, in the Bond Critical Points (BCP) and Critical Points of the Laplacian of the electron density (LCP), facilitating the classification of chemical interactions. The map projects created can be stored in the form of HTML files, for later consultation through any type of browser. For validation of the software, several systems with 0–3D dimensions were studied. In addition, the topology of urea molecular crystal and its isolated molecule were revisited.
- 23 March 2023
- Published by American Chemical Society (ACS) in Journal of Chemical Information and Modeling
- Vol. 63 (7) , 1999-2013
TopIso3D Viewer: Enhancing Topological Analysis through 3D Isosurfaces
We present TopIso3DViewer, a software with a user-friendly graphical interface, that generates three-dimensional maps to analyze descriptors based on the Quantum Theory of Atoms in Molecules (QTAIM), applied in periodic and nonperiodic systems. The software also automates the launching of topological analysis calculations through the Topond package and generates a report that facilitates the identification of the values of the calculated descriptors, in the Bond Critical Points (BCP) and Critical Points of the Laplacian of the electron density (LCP), facilitating the classification of chemical interactions. The map projects created can be stored in the form of HTML files, for later consultation through any type of browser. For validation of the software, several systems with 0–3D dimensions were studied. In addition, the topology of urea molecular crystal and its isolated molecule were revisited.
- 21 April 2020
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 22 (29) , 16562-16570
Intra-octahedral distortion on lamellar potassium niobate K 4 Nb 6 O 17 : a periodic DFT study of structural, electronic and vibrational properties
DFT calculation applied to K 4 Nb 6 O 17 allowed to identify and correlate its electronic and vibrational properties with [NbO 6 ] intraoctahedral distortion.
- 21 April 2020
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 22 (29) , 16562-16570
Intra-octahedral distortion on lamellar potassium niobate K 4 Nb 6 O 17 : a periodic DFT study of structural, electronic and vibrational properties
DFT calculation applied to K 4 Nb 6 O 17 allowed to identify and correlate its electronic and vibrational properties with [NbO 6 ] intraoctahedral distortion.
- 3 January 2020
- Published by Springer Nature
- p. 67-83
Photocatalytic and Photoluminescent Properties of TiO2 Nanocrystals Obtained by the Microwave Solvothermal Method
- 3 January 2020
- Published by Springer Nature
- p. 67-83
Photocatalytic and Photoluminescent Properties of TiO2 Nanocrystals Obtained by the Microwave Solvothermal Method
- Open Access
- 19 September 2019
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 4 (14) , 15849-15855
Catalytic Deoxygenation of the Oil and Biodiesel of Licuri (Syagrus coronata) To Obtain n-Alkanes with Chains in the Range of Biojet Fuels
Aviation industry has the challenge of halving CO2 emissions by 2050, as compared to 2005. An alternative are drop-in biofuels, which are sustainable and fully compatible with aircraft engines and also can be mixed with fossil jet fuel. Among the feedstock for biojet fuel production, licuri (Syagrus coronata) can be highlighted as most of its fatty acids are in the jet fuel range. Thereby, this work investigated the composition and physicochemical characterization of licuri oil and licuri biodiesel, both with satisfactory results according to international standards, with the purpose of obtaining hydrocarbons in the range of jet fuel from these feedstock, by catalytic deoxygenation. The semi-batch reaction, using a 5% Pd/C catalyst at 300 °C and 207 psi, produced n-alkanes with a conversion of up to 39.2%. The n-alkane selectivity was 80.7%, in addition to CO2 selectivity of 83.4% for biodiesel, indicating the preference for the decarboxylation pathway and also confirming licuri as a potential raw material for biojet fuel.
- 19 September 2019
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 4 (14) , 15849-15855
Open AccessCatalytic Deoxygenation of the Oil and Biodiesel of Licuri (Syagrus coronata) To Obtain n-Alkanes with Chains in the Range of Biojet Fuels
Aviation industry has the challenge of halving CO2 emissions by 2050, as compared to 2005. An alternative are drop-in biofuels, which are sustainable and fully compatible with aircraft engines and also can be mixed with fossil jet fuel. Among the feedstock for biojet fuel production, licuri (Syagrus coronata) can be highlighted as most of its fatty acids are in the jet fuel range. Thereby, this work investigated the composition and physicochemical characterization of licuri oil and licuri biodiesel, both with satisfactory results according to international standards, with the purpose of obtaining hydrocarbons in the range of jet fuel from these feedstock, by catalytic deoxygenation. The semi-batch reaction, using a 5% Pd/C catalyst at 300 °C and 207 psi, produced n-alkanes with a conversion of up to 39.2%. The n-alkane selectivity was 80.7%, in addition to CO2 selectivity of 83.4% for biodiesel, indicating the preference for the decarboxylation pathway and also confirming licuri as a potential raw material for biojet fuel.
- 1 April 2016
- Published by Elsevier in Solid State Sciences
- Vol. 54, 17-21
Preparation of niobium based oxynitride nanosheets by exfoliation of Ruddlesden-Popper phase precursor
- 1 April 2016
- Published by Elsevier in Solid State Sciences
- Vol. 54, 17-21
Preparation of niobium based oxynitride nanosheets by exfoliation of Ruddlesden-Popper phase precursor