Aditya Sood
Aditya Sood has a total of 183 co-authors. Here are the top co-authors by number of shared publications:
- Aaron M. Lindenberg
Department of Materials Science and Engineering, Stanford University, Stanford, USA
11 shared publications - Eric Pop
Stanford University
9 shared publications Kenneth E. Goodson
Department of Mechanical Engineering, Stanford University, Stanford, California 94305, United States
9 shared publicationsMehdi Asheghi
Department of Mechanical Engineering, Stanford University 2 , Stanford, California 94305, USA
7 shared publications- Burak Guzelturk
Argonne National Laboratory
4 shared publications - Davide Donadio
Department of Chemistry, University of California, Davis, Davis, California 95616, United States
4 shared publications
Latest Publications
- 8 April 2024
- Published by Springer Nature in Nature Reviews Materials
- Vol. 9 (7) , 499-508
Engineering interlayer hybridization in van der Waals bilayers
- 8 April 2024
- Published by Springer Nature in Nature Reviews Materials
- Vol. 9 (7) , 499-508
Engineering interlayer hybridization in van der Waals bilayers
- Open Access
- 26 January 2024
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 10 (4) , eadj8819
Hidden phonon highways promote photoinduced interlayer energy transfer in twisted transition metal dichalcogenide heterostructures
Vertically stacked van der Waals (vdW) heterostructures exhibit unique electronic, optical, and thermal properties that can be manipulated by twist-angle engineering. However, the weak phononic coupling at a bilayer interface imposes a fundamental thermal bottleneck for future two-dimensional devices. Using ultrafast electron diffraction, we directly investigated photoinduced nonequilibrium phonon dynamics in MoS 2 /WS 2 at 4° twist angle and WSe 2 /MoSe 2 heterobilayers with twist angles of 7°, 16°, and 25°. We identified an interlayer heat transfer channel with a characteristic timescale of ~20 picoseconds, about one order of magnitude faster than molecular dynamics simulations assuming initial intralayer thermalization. Atomistic calculations involving phonon-phonon scattering suggest that this process originates from the nonthermal phonon population following the initial interlayer charge transfer and scattering. Our findings present an avenue for thermal management in vdW heterostructures by tailoring nonequilibrium phonon populations.
- 26 January 2024
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 10 (4) , eadj8819
Open AccessHidden phonon highways promote photoinduced interlayer energy transfer in twisted transition metal dichalcogenide heterostructures
Vertically stacked van der Waals (vdW) heterostructures exhibit unique electronic, optical, and thermal properties that can be manipulated by twist-angle engineering. However, the weak phononic coupling at a bilayer interface imposes a fundamental thermal bottleneck for future two-dimensional devices. Using ultrafast electron diffraction, we directly investigated photoinduced nonequilibrium phonon dynamics in MoS 2 /WS 2 at 4° twist angle and WSe 2 /MoSe 2 heterobilayers with twist angles of 7°, 16°, and 25°. We identified an interlayer heat transfer channel with a characteristic timescale of ~20 picoseconds, about one order of magnitude faster than molecular dynamics simulations assuming initial intralayer thermalization. Atomistic calculations involving phonon-phonon scattering suggest that this process originates from the nonthermal phonon population following the initial interlayer charge transfer and scattering. Our findings present an avenue for thermal management in vdW heterostructures by tailoring nonequilibrium phonon populations.
- 21 December 2022
- Published by Springer Nature in Nature Nanotechnology
- Vol. 18 (1) , 29-35
Bidirectional phonon emission in two-dimensional heterostructures triggered by ultrafast charge transfer
Photoinduced charge transfer in van der Waals heterostructures occurs on the 100 fs timescale despite weak interlayer coupling and momentum mismatch. However, little is understood about the microscopic mechanism behind this ultrafast process and the role of the lattice in mediating it. Here, using femtosecond electron diffraction, we directly visualize lattice dynamics in photoexcited heterostructures of WSe2/WS2 monolayers. Following the selective excitation of WSe2, we measure the concurrent heating of both WSe2 and WS2 on a picosecond timescale—an observation that is not explained by phonon transport across the interface. Using first-principles calculations, we identify a fast channel involving an electronic state hybridized across the heterostructure, enabling phonon-assisted interlayer transfer of photoexcited electrons. Phonons are emitted in both layers on the femtosecond timescale via this channel, consistent with the simultaneous lattice heating observed experimentally. Taken together, our work indicates strong electron–phonon coupling via layer-hybridized electronic states—a novel route to control energy transport across atomic junctions.
- 21 December 2022
- Published by Springer Nature in Nature Nanotechnology
- Vol. 18 (1) , 29-35
Bidirectional phonon emission in two-dimensional heterostructures triggered by ultrafast charge transfer
Photoinduced charge transfer in van der Waals heterostructures occurs on the 100 fs timescale despite weak interlayer coupling and momentum mismatch. However, little is understood about the microscopic mechanism behind this ultrafast process and the role of the lattice in mediating it. Here, using femtosecond electron diffraction, we directly visualize lattice dynamics in photoexcited heterostructures of WSe2/WS2 monolayers. Following the selective excitation of WSe2, we measure the concurrent heating of both WSe2 and WS2 on a picosecond timescale—an observation that is not explained by phonon transport across the interface. Using first-principles calculations, we identify a fast channel involving an electronic state hybridized across the heterostructure, enabling phonon-assisted interlayer transfer of photoexcited electrons. Phonons are emitted in both layers on the femtosecond timescale via this channel, consistent with the simultaneous lattice heating observed experimentally. Taken together, our work indicates strong electron–phonon coupling via layer-hybridized electronic states—a novel route to control energy transport across atomic junctions.
- 30 November 2022
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 22 (23) , 9275-9282
Light-Driven Ultrafast Polarization Manipulation in a Relaxor Ferroelectric
Relaxor ferroelectrics have been intensely studied for decades based on their unique electromechanical responses which arise from local structural heterogeneity involving polar nanoregions or domains. Here, we report first studies of the ultrafast dynamics and reconfigurability of the polarization in freestanding films of the prototypical relaxor 0.68PbMg1/3Nb2/3O3-0.32PbTiO3 (PMN-0.32PT) by probing its atomic-scale response via femtosecond-resolution, electron-scattering approaches. By combining these structural measurements with dynamic phase-field simulations, we show that femtosecond light pulses drive a change in both the magnitude and direction of the polarization vector within polar nanodomains on few-picosecond time scales. This study defines new opportunities for dynamic reconfigurable control of the polarization in nanoscale relaxor ferroelectrics.
- 30 November 2022
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 22 (23) , 9275-9282
Light-Driven Ultrafast Polarization Manipulation in a Relaxor Ferroelectric
Relaxor ferroelectrics have been intensely studied for decades based on their unique electromechanical responses which arise from local structural heterogeneity involving polar nanoregions or domains. Here, we report first studies of the ultrafast dynamics and reconfigurability of the polarization in freestanding films of the prototypical relaxor 0.68PbMg1/3Nb2/3O3-0.32PbTiO3 (PMN-0.32PT) by probing its atomic-scale response via femtosecond-resolution, electron-scattering approaches. By combining these structural measurements with dynamic phase-field simulations, we show that femtosecond light pulses drive a change in both the magnitude and direction of the polarization vector within polar nanodomains on few-picosecond time scales. This study defines new opportunities for dynamic reconfigurable control of the polarization in nanoscale relaxor ferroelectrics.
- 18 October 2022
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 16 (11) , 18695-18707
Thickness- and Twist-Angle-Dependent Interlayer Excitons in Metal Monochalcogenide Heterostructures
Interlayer excitons, or bound electron-hole pairs whose constituent quasiparticles are located in distinct stacked semiconducting layers, are being intensively studied in heterobilayers of two-dimensional semiconductors. They owe their existence to an intrinsic type-II band alignment between both layers that convert these into p-n junctions. Here, we unveil a pronounced interlayer exciton (IX) in heterobilayers of metal monochalcogenides, namely, γ-InSe on ε-GaSe, whose pronounced emission is adjustable just by varying their thicknesses given their number of layers dependent direct band gaps. Time-dependent photoluminescense spectroscopy unveils considerably longer interlayer exciton lifetimes with respect to intralayer ones, thus confirming their nature. The linear Stark effect yields a bound electron-hole pair whose separation d is just (3.6 ± 0.1) Å with d being very close to dSe = 3.4 Å which is the calculated interfacial Se separation. The envelope of IX is twist-angle-dependent and describable by superimposed emissions that are nearly equally spaced in energy, as if quantized due to localization induced by the small moiré periodicity. These heterostacks are characterized by extremely flat interfacial valence bands making them prime candidates for the observation of magnetism or other correlated electronic phases upon carrier doping.
- 18 October 2022
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 16 (11) , 18695-18707
Thickness- and Twist-Angle-Dependent Interlayer Excitons in Metal Monochalcogenide Heterostructures
Interlayer excitons, or bound electron-hole pairs whose constituent quasiparticles are located in distinct stacked semiconducting layers, are being intensively studied in heterobilayers of two-dimensional semiconductors. They owe their existence to an intrinsic type-II band alignment between both layers that convert these into p-n junctions. Here, we unveil a pronounced interlayer exciton (IX) in heterobilayers of metal monochalcogenides, namely, γ-InSe on ε-GaSe, whose pronounced emission is adjustable just by varying their thicknesses given their number of layers dependent direct band gaps. Time-dependent photoluminescense spectroscopy unveils considerably longer interlayer exciton lifetimes with respect to intralayer ones, thus confirming their nature. The linear Stark effect yields a bound electron-hole pair whose separation d is just (3.6 ± 0.1) Å with d being very close to dSe = 3.4 Å which is the calculated interfacial Se separation. The envelope of IX is twist-angle-dependent and describable by superimposed emissions that are nearly equally spaced in energy, as if quantized due to localization induced by the small moiré periodicity. These heterostacks are characterized by extremely flat interfacial valence bands making them prime candidates for the observation of magnetism or other correlated electronic phases upon carrier doping.
- 23 November 2021
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 15 (12) , 19503-19512
Engineering Thermal Transport across Layered Graphene–MoS2 Superlattices
Layering two-dimensional van der Waals materials provides a high degree of control over atomic placement, which could enable tailoring of vibrational spectra and heat flow at the sub-nanometer scale. Here, using spatially resolved ultrafast thermoreflectance and spectroscopy, we uncover the design rules governing cross-plane heat transport in superlattices assembled from monolayers of graphene (G) and MoS2 (M). Using a combinatorial experimental approach, we probe nine different stacking sequences, G, GG, MG, GGG, GMG, GGMG, GMGG, GMMG, and GMGMG, and identify the effects of vibrational mismatch, interlayer adhesion, and junction asymmetry on thermal transport. Pure G sequences display evidence of quasi-ballistic transport, whereas adding even a single M layer strongly disrupts heat conduction. The experimental data are described well by molecular dynamics simulations, which include thermal expansion, accounting for the effect of finite temperature on the interlayer spacing. The simulations show that an increase of ∼2.4% in the layer separation of GMGMG, relative to its value at 300 K, can lead to a doubling of the thermal resistance. Using these design rules, we experimentally demonstrate a five-layer GMGMG superlattice “thermal metamaterial” with an ultralow effective cross-plane thermal conductivity comparable to that of air.
- 23 November 2021
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 15 (12) , 19503-19512
Engineering Thermal Transport across Layered Graphene–MoS2 Superlattices
Layering two-dimensional van der Waals materials provides a high degree of control over atomic placement, which could enable tailoring of vibrational spectra and heat flow at the sub-nanometer scale. Here, using spatially resolved ultrafast thermoreflectance and spectroscopy, we uncover the design rules governing cross-plane heat transport in superlattices assembled from monolayers of graphene (G) and MoS2 (M). Using a combinatorial experimental approach, we probe nine different stacking sequences, G, GG, MG, GGG, GMG, GGMG, GMGG, GMMG, and GMGMG, and identify the effects of vibrational mismatch, interlayer adhesion, and junction asymmetry on thermal transport. Pure G sequences display evidence of quasi-ballistic transport, whereas adding even a single M layer strongly disrupts heat conduction. The experimental data are described well by molecular dynamics simulations, which include thermal expansion, accounting for the effect of finite temperature on the interlayer spacing. The simulations show that an increase of ∼2.4% in the layer separation of GMGMG, relative to its value at 300 K, can lead to a doubling of the thermal resistance. Using these design rules, we experimentally demonstrate a five-layer GMGMG superlattice “thermal metamaterial” with an ultralow effective cross-plane thermal conductivity comparable to that of air.
- 31 July 2021
- Published by Wiley in Advanced Materials
- Vol. 33 (37) , 2101875
Highly Efficient Uniaxial In‐Plane Stretching of a 2D Material via Ion Insertion
On‐chip dynamic strain engineering requires efficient micro‐actuators that can generate large in‐plane strains. Inorganic electrochemical actuators are unique in that they are driven by low voltages (≈1 V) and produce considerable strains (≈1%). However, actuation speed and efficiency are limited by mass transport of ions. Minimizing the number of ions required to actuate is thus key to enabling useful “straintronic” devices. Here, it is shown that the electrochemical intercalation of exceptionally few lithium ions into WTe2 causes large anisotropic in‐plane strain: 5% in one in‐plane direction and 0.1% in the other. This efficient stretching of the 2D WTe2 layers contrasts to intercalation‐induced strains in related materials which are predominantly in the out‐of‐plane direction. The unusual actuation of LixWTe2 is linked to the formation of a newly discovered crystallographic phase, referred to as Td', with an exotic atomic arrangement. On‐chip low‐voltage (<0.2 V) control is demonstrated over the transition to the novel phase and its composition. Within the Td'‐Li0.5−δWTe2 phase, a uniaxial in‐plane strain of 1.4% is achieved with a change of δ of only 0.075. This makes the in‐plane chemical expansion coefficient of Td'‐Li0.5−δWTe2 far greater than of any other single‐phase material, enabling fast and efficient planar electrochemical actuation.
- 31 July 2021
- Published by Wiley in Advanced Materials
- Vol. 33 (37) , 2101875
Highly Efficient Uniaxial In‐Plane Stretching of a 2D Material via Ion Insertion
On‐chip dynamic strain engineering requires efficient micro‐actuators that can generate large in‐plane strains. Inorganic electrochemical actuators are unique in that they are driven by low voltages (≈1 V) and produce considerable strains (≈1%). However, actuation speed and efficiency are limited by mass transport of ions. Minimizing the number of ions required to actuate is thus key to enabling useful “straintronic” devices. Here, it is shown that the electrochemical intercalation of exceptionally few lithium ions into WTe2 causes large anisotropic in‐plane strain: 5% in one in‐plane direction and 0.1% in the other. This efficient stretching of the 2D WTe2 layers contrasts to intercalation‐induced strains in related materials which are predominantly in the out‐of‐plane direction. The unusual actuation of LixWTe2 is linked to the formation of a newly discovered crystallographic phase, referred to as Td', with an exotic atomic arrangement. On‐chip low‐voltage (<0.2 V) control is demonstrated over the transition to the novel phase and its composition. Within the Td'‐Li0.5−δWTe2 phase, a uniaxial in‐plane strain of 1.4% is achieved with a change of δ of only 0.075. This makes the in‐plane chemical expansion coefficient of Td'‐Li0.5−δWTe2 far greater than of any other single‐phase material, enabling fast and efficient planar electrochemical actuation.
- Top Cited Papers
- 16 July 2021
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 373 (6552) , 352-355
Universal phase dynamics in VO 2 switches revealed by ultrafast operando diffraction
A transient metal: Vanadium dioxide is known to have a coupled structural and electronic transition that can be accessed through light, thermal, or electrical excitation. Ultrafast optical studies of this insulator-to-metal transition indicate that it is mediated by the formation of a transient metallic phase that retains the structure of the original insulating phase. Sood et al. show that a similar sequence occurs when the material is electrically excited with a series of voltage pulses. Using ultrafast electron diffraction, the researchers monitored the structure of a vanadium dioxide sample after excitation and found evidence of a metastable metallic phase that appears during the transition. Science , abc0652, this issue p. 352
- 16 July 2021
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 373 (6552) , 352-355
Top Cited PapersUniversal phase dynamics in VO 2 switches revealed by ultrafast operando diffraction
A transient metal: Vanadium dioxide is known to have a coupled structural and electronic transition that can be accessed through light, thermal, or electrical excitation. Ultrafast optical studies of this insulator-to-metal transition indicate that it is mediated by the formation of a transient metallic phase that retains the structure of the original insulating phase. Sood et al. show that a similar sequence occurs when the material is electrically excited with a series of voltage pulses. Using ultrafast electron diffraction, the researchers monitored the structure of a vanadium dioxide sample after excitation and found evidence of a metastable metallic phase that appears during the transition. Science , abc0652, this issue p. 352
- 23 June 2021
- Published by IOP Publishing in 2D Materials
- Vol. 8 (3) , 035055
Graphene-based electromechanical thermal switches
Thermal management is an important challenge in modern electronics, avionics, automotive, and energy storage systems. While passive thermal solutions (like heat sinks or heat spreaders) are often used, actively modulating heat flow (e.g. via thermal switches or diodes) would offer additional degrees of control over the management of thermal transients and system reliability. Here we report the first thermal switch based on flexible, collapsible graphene membranes with low operating voltage (∼2 V) and thermal switching ratio up to ∼1.3. We also employ active-mode scanning thermal microscopy to measure the device behavior and switching in real time. A compact analytical thermal model is developed for the general case of a thermal switch based on a double-clamped suspended membrane, highlighting the thermal and electrical design challenges. System-level modeling demonstrates the thermal trade-offs between modulating temperature swing and average temperature as a function of switching ratio. These graphene-based thermal switches present new opportunities for active control of fast (even nanosecond) thermal transients in densely integrated systems.
- 23 June 2021
- Published by IOP Publishing in 2D Materials
- Vol. 8 (3) , 035055
Graphene-based electromechanical thermal switches
Thermal management is an important challenge in modern electronics, avionics, automotive, and energy storage systems. While passive thermal solutions (like heat sinks or heat spreaders) are often used, actively modulating heat flow (e.g. via thermal switches or diodes) would offer additional degrees of control over the management of thermal transients and system reliability. Here we report the first thermal switch based on flexible, collapsible graphene membranes with low operating voltage (∼2 V) and thermal switching ratio up to ∼1.3. We also employ active-mode scanning thermal microscopy to measure the device behavior and switching in real time. A compact analytical thermal model is developed for the general case of a thermal switch based on a double-clamped suspended membrane, highlighting the thermal and electrical design challenges. System-level modeling demonstrates the thermal trade-offs between modulating temperature swing and average temperature as a function of switching ratio. These graphene-based thermal switches present new opportunities for active control of fast (even nanosecond) thermal transients in densely integrated systems.
- 24 May 2021
- Published by Springer Nature in Nature Reviews Materials
- Vol. 6 (9) , 847-867
Electrochemical ion insertion from the atomic to the device scale
- 24 May 2021
- Published by Springer Nature in Nature Reviews Materials
- Vol. 6 (9) , 847-867
Electrochemical ion insertion from the atomic to the device scale