WNWladimir Neumann

Wladimir Neumann

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Wladimir Neumann has a total of 311 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    In-flight receiver calibration of the Ganymede Laser Altimeter (GALA) by passive Earth observations

    by Gaku Nishiyama, Alexander Stark, Klaus-Dieter Matz, Christian Hüttig, Kai Wickhusen, Livio Agostini, Christian Althaus, Jan Binger, Keigo Enya, Janot George, et al.

    Post-launch characterization of the receiver telescope of the laser altimeter is essential for achieving precise georeferenced planetary measurements and for radiometric calibration to passively measure surface reflectance. For the Ganymede Laser Altimeter (GALA) aboard the Jupiter Icy Moons Explorer (Juice), such in-flight calibration was originally planned during a lunar flyby but could not be performed due to an unexpected reboot of the instrument. Instead, this study reports a passive noise measurement acquired during the Earth-farewell campaign on 9 September 2024 as an alternative opportunity for in-flight calibration. Using temporal variations in the GALA noise level as a proxy for photon flux incident on the GALA detector, we combine a theoretical noise model with Earth images obtained by the Jovis Amorum ac Natorum Undique Scrutator (JANUS) imager to constrain the GALA receiver boresight direction. By comparing the timing, magnitude, and temporal pattern of noise variations between observations and simulations, we find that the pre-launch boresight vector is inconsistent with the Earth-farewell observations. Our results further suggest that the GALA receiver boresight may have experienced a post-launch offset over 700 µrad, although a definitive conclusion can be drawn only with additional cruise-phase data. The methodology developed in this study offers a framework for in-flight alignment calibration of GALA during future flybys, which is broadly applicable to other planetary laser altimeters. The radiometric calibration performed in study is also prerequisite for the interpretation of passive albedo measurements of Jupiter and the Galilean moons.


  • Open Access

    Radar Transponder Based Orbit Determination Around Enceladus

    by Wladimir Neumann, Sonasha Auer Wilkins, Jürgen Oberst, Letizia Gambacorta, Andreas Benedikter, Valentin Marx, Alexander Stark, Hauke Hussmann, Kai Wickhusen, Martin Vossiek

    Saturn’s icy moon Enceladus is one of the most compelling targets for future planetary exploration due to strong evidence for a global subsurface ocean, ongoing cryovolcanic activity, and the potential for habitable environments beneath its ice shell [1-3]. Future missions to Enceladus will require highly accurate spacecraft navigation to enable geophysical investigations, radar sounding, gravity-field recovery, and precise measurements of tidal deformation. Within the German Space Agency's Enceladus Explorer Initiative project RaTNOS (Radar Transponder based Navigation and Orbit determination for Satellites), we investigate advanced orbit determination strategies for spacecraft operating in Enceladus orbit using combinations of Earth-based radio tracking and local radar transponder measurements. An orbit determination framework was developed using open-source orbit estimation software Tudat(Py) (TU Delft Astrodynamics Toolbox in Python) [e.g., 4]. The framework estimates the spacecraft initial state vector together with additional dynamic and observational parameters. Simulations consider realistic dynamical perturbations, including higher-order gravity harmonics of Enceladus, perturbations from Saturn, and tracking noise from radar observations. Three tracking architectures are analysed: (1) classical communication between the spacecraft and Earth-based Deep Space Network (DSN) stations, (2) communication between the spacecraft and radar transponders deployed on the surface of Enceladus, and (3) a hybrid configuration combining DSN and transponder-based tracking. Our results demonstrate that local radar transponders improve orbit determination accuracy compared with DSN-only tracking. While a single transponder provides limited improvement because of short communication windows during orbital flyovers, configurations with multiple transponders yield significant gains. The analysis further shows that the number and spatial distribution of transponders exert a stronger influence on navigation performance than moderate variations in signal quality.Precise orbit determination contributes to constraining geophysical properties of Enceladus. In particular, accurate measurement of tidal deformation through repeated orbital observations may provide critical insight into the internal structure and habitability of the moon. Our findings demonstrate that radar-assisted orbit determination architectures offer a promising pathway toward high-precision navigation for future Enceladus missions. Our methodology supports both mission design optimisation and the scientific interpretation of future geodetic and geophysical measurements around icy ocean worlds.[1] Thomas et al. (2016) Enceladus’s measured physical libration requires a global subsurface ocean. Icarus, 264, 37-47.[2] Hansen et al. (2011) The composition and structure of the Enceladus plume. Geophysical Research Letters, 38, 6.[3] Xu et al. (2025) Enough Sulfur and Iron for Potential Life Make Enceladus’s Ocean Fully Habitable. The Astrophysical Journal Letters, 980, L10.[4] Dirkx et al. (2022). The open-source astrodynamics tudatpy software-overview for planetary mission design and science analysis. EPSC2022, (EPSC2022-253).

  • Open Access

    Magnetic Field On Early Protoplanet Vesta

    by Jonas de Seriis, Jürgen Oberst, Wladimir Neumann

    IntroductionThe early Solar System is characterized by populations of protoplanets, which grew through accretion processes. Protoplanets of sufficient mass were fueled by short-lived radionuclides like 26Al, which caused widespread melting and led to chemical differentiation. Asteroid 4 Vesta is one of the best-preserved and studied examples of such a differentiated protoplanet from the early Solar System. Paleomagnetic analyses of HED (Howardite, Eucrite, Diogenite) meteorites - thought to be crustal samples from Vesta - reveal natural remanent magnetization, which implies the presence of an ancient internal magnetic field (Weiss et al. 2010; Fu et al. 2012). This magnetic field might have been powered by an internal core dynamo, driven by thermal convection within a liquid, electrically-conductive metallic core. Since NASA’s Dawn mission did not carry a magnetometer, we rely on a combination of numerical thermal evolution modeling and meteorite analysis to constrain Vesta’s magnetic history. Research question and methodologyThis study investigates the potential for an ancient, thermally driven core dynamo on the protoplanet Vesta to explain the natural remanent magnetization observed in HED meteorites. Because there are no direct measurements of Vesta’s magnetic field, the study performs investigations on modeled 1-dimensional radial temperature profiles, which represent the physical properties of the body’s interior. The datasets represent Vesta as a radially non-homogeneous, spherically symmetric body, and span a time interval of up to 4.5 Ga following the formation of Calcium-Aluminum-rich Inclusions (CAIs), which represent the earliest dated solids in the Solar System and are therefore commonly used as the reference time for Solar System formation. The profiles are generated following the modeling framework of Neumann et al. (2014), applying numerical solutions of coupled partial differential equations governing heat transfer and mass transport. The configurations vary based on the differentiation scenario - comparing a global magma ocean against a shallow magma ocean case - and the timing of the accretion, investigating an early accretion time (at the time of CAIs) against a late accretion time (1.5 Ma after CAIs). Furthermore, MAC (Magnetic, Archimedean and Coriolis forces) scaling laws are applied to estimate the magnetic Reynolds number and the resulting magnetic field strength inside the core and on the surface for each scenario. The results are compared to the remanent magnetization recorded in the HED meteorites. ResultsOur findings reveal that all four configurations meet the conditions for a thermally driven core dynamo at some point during the first hundred Ma of the protoplanet’s evolution. The onset, duration and intensity of the dynamo are dependent on the available heat budget from 26Al. Consequently, early accretion scenarios produce more vigorous and long-lasting dynamos, whereas late accretion results in delayed or marginal magnetic activity. Notably, for all modeled configurations the core dynamo terminates before 500 Ma after CAIs. This is consistent with the HED meteorite record preserving crustal remanence from an earlier active dynamo rather than an actively generated field (Fu et al. 2012; Weiss et al. 2010). However, the modeled surface field strengths of 200–300 μT are higher than the 2–5 μT recorded in HED meteorites, which is attributed to the known tendency of MAC scaling laws to overestimate field strengths in small convecting bodies (Christensen 2009; Formisano et al. 2016). The models of timing and occurrence of the dynamo are the more robust outcomes of this study and provide new quantitative support for an ancient core dynamo on Vesta consistent with the paleomagnetic evidence. References:Christensen, U. (2009). Dynamo scaling laws and applications to the planets. Space Science Reviews, 152:565– 590.Formisano, M. et al. (2016). A core dynamo in vesta? Monthly Notices of the Royal Astronomical Society, 458:695–707.Fu, R. et al. (2012). An ancient core dynamo in asteroid vesta. Science, 338:238–241.Neumann, W. et al. (2014). Differentiation of vesta: Implications for a shallow magma ocean. Earth and Planetary Science Letters, 395:267–280.Weiss, B. P. et al. (2010). Paleomagnetic records of meteorites and early planetesimal differentiation. Space Science Reviews, 152:341–390.

  • Open Access

    Stable High-Inclination Orbits around Enceladus for South Polar Coverage

    by Sonasha Auer Wilkins, Wladimir Neumann, Jürgen Oberst, Letizia Gambacorta, Andreas Benedikter, Valentin Marx, Alexander Stark, Hauke Hussmann, Kai Wickhusen, Martin Vossiek

    IntroductionAmong the icy moons of our Solar System, Saturn’s moon Enceladus has emerged as a prime target for astrobiological research. Its potentially habitable environment is characterized by a global subsurface liquid water ocean [1], ongoing geothermal activity at the ocean-core interface [2], and the presence of life-essential elements [3].To investigate the moon’s geophysical properties and search for biosignatures within its subsurface ocean, the German Space Agency at DLR has launched the Enceladus Explorer (EnEx) initiative. Within this framework, the EnEx-RaTNOS project (Radar Transponder based Navigation and Orbit Determination by Satellite) aims at geodetic mapping, enabled by precision orbit determination through a network of radar transponders deployed on Enceladus’ surface, effectively forming a local positioning system [4].Research QuestionA key prerequisite to achieving the EnEx mission objectives is the identification of stable science orbits. Such orbits should have high inclinations to ensure sufficient coverage of Enceladus’ south polar region, which is of particular scientific interest due to active cryovolcanic geysers [5] and locally reduced ice shell thickness [6]. Depending on the mission design, additional desirable orbital characteristics may include low eccentricity and low altitude to enable uniform global surface coverage, repeating ground tracks with short repeat periods to support Synthetic Aperture Radar (SAR) acquisitions [7, 8], and homogeneously distributed ground-tracks to reduce geographic variability in lander observation errors, thereby improving the quality of estimated geophysical parameters [9]. Highly elliptical orbits with low-altitude passes over the south polar region are also of interest [10]. The design of science orbits satisfying these constraints is especially challenging in the Saturn-Enceladus system, as the strong gravitational perturbations exerted by Saturn rapidly destabilize highly inclined orbits around the small moon, leading to impact timescales on the order of several days [11].MethodologyBuilding on previous work by Benedikter et al. (2022) [8] and Auer Wilkins et al. (2025) [12], who identified families of stable, near-circular, periodic orbits using a grid-search method, this study extends the search for viable science orbits in several ways. Firstly, the ephemeris model, previously consisting only of Enceladus’ non-spherical gravity terms [13] extrapolated to degree 85 assuming Airy Isostasy [14, 15] and Saturn’s non-spherical gravity terms [16], is extended by Enceladus’ rotational model described by Park et al. (2024) [13]. Furthermore, the grid-search methodology is expanded beyond near-circular orbit geometries to include highly eccentric trajectories with low-altitude passes over Enceladus’ south pole. While near-circular orbits are analyzed based on a periodicity metric which minimizes the angular deviation between initial and repeating state vectors after an estimated repeat period, highly eccentric orbits are evaluated using a metric which maximizes orbital stability and the quality of south polar coverage. The search for elliptical orbits is based on the translation of known orbital families, such as halo orbits associated with the Saturn-Enceladus Lagrange points [17], from the circular restricted three body problem (CR3BP) model to a high-fidelity ephemeris model.Preliminary ResultsCandidate orbits identified through the grid-search method are analyzed in a full-fidelity ephemeris model using the TU Delft Astrodynamics Toolbox (Tudat). As an initial result of this ongoing work, Figure 1 shows the south pole groundtrack of a candidate orbit identified through a grid-search initialized from the L1 Lagrange point near rectilinear halo orbit [17] and propagated over 5 days. The orbit achieves repeated low-altitude passes below 50 km over the south polar terrain. A broader selection of candidate orbits and a full analysis of their long-term stability will be presented and discussed at the conference.Figure 1: South pole groundtrack of a candidate elliptical orbit propagated over 5 days.References:[1] P.C. Thomas et al. Enceladus’s measured physical libration requires a global subsurface ocean. Icarus, 264:37–47, 1 2016.[2] C. J. Hansen et al. The composition and structure of the Enceladus plume. Geophysical Research Letters, 38(11):n/a, 6 2011.[3] Weiming Xu et al. Enough Sulfur and Iron for Potential Life Make Enceladus’s Ocean Fully Habitable. The Astrophysical Journal Letters, 980(1):L10, February 2025.[4] J. Oberst and M. Vossiek. Gesamtvorhabensbeschreibung EnEx-RaTNOS Radartransponder basierte Navigation und Orbitbestimmung von Satelliten. Technical report, 6 2023.[5] C. J. Mitchell et al. Tracking the geysers of Enceladus into Saturn’s E ring. The Astronomical Journal, 149(5):156, April 2015.[6] Ondrˇej Cˇadek et al. Enceladus’s internal ocean and ice shell constrained from Cassini gravity, shape, and libration data. Geophysical Research Letters, 43(11):5653–5660, June 2016.[7] Paul A. Rosen et al. Repeat Pass InSAR at Enceladus- A Geophysics Mission Concept to Understand Dynamics and Habitability. In EUSAR 2024; 15th European Conference on Synthetic Aperture Radar, pages 1318–1323, 2024.[8] Andreas Benedikter et al. Periodic orbits for interferometric and tomographic radar imaging of Saturn’s moon Enceladus. Acta Astronautica, 191:326–345, February 2022.[9] Mattia Contarini. Scientific performance analysis for a novel science mission to characterise Enceladus’ interior. Master thesis, Delft University of Technology, 2025.[10] Spencer Boone, Joan Pau Sanchez Cuartialles, and St´ephanie Lizy-Destrez. Catalog and Characterization of Science Orbit Configurations for an Enceladus Orbiter, 2025.[11] Ryan P. Russell and Martin Lara. On the design of an Enceladus science orbit. Acta...

  • Open Access

    Sorting and recycling processes of early inner Solar System materials

    by Jinwei Xiang, Wladimir Neumann, Ye Li, Lei Jin, Yanlin Zhu, Ziliang Jin

    Context . Within pristine chondrites, chondrules and a fine-grained matrix are the dominant components; however, their genetic relationship remains unresolved. Specifically, during chondrule formation through multiple heating events, recycling of chondritic materials was inevitable, yet its influence on elemental distributions between chondrules and the residual material that ultimately became the matrix remains poorly understood. Aims . We aim to evaluate how recycling processes influence the chemical relationship between chondrules and matrix in unequilibrated ordinary chondrites and the parent body evolution. Methods . We performed systematic major and trace element analyses of silicate minerals, chondrule mesostasis, and matrix in nine unequilibrated ordinary chondrites using an in situ analytical technique, combined with numerical simulations to model recycling processes and parent body evolution. Results . Our analytical results show that chondrule mesostasis exhibits the lowest Mg/Si ratios, followed by the matrix and chondrule silicates. Both mesostasis and matrix display similar enrichment patterns in incompatible elements, although matrix compositions vary widely among samples. These observations suggest that recycling was accompanied by compositional sorting, leading to differential reincorporation of mesostasis- and silicate-derived fragments. Numerical simulations further reproduce (1) the chemical divergence between chondrules and matrix, (2) variable enrichment of incompatible elements in the matrix, and (3) heavy-isotope enrichment of moderately volatile elements. In addition, sorting during accretion likely resulted in variable Al abundances among chondrite parent bodies, thereby influencing the duration and extent of their thermal evolution. Conclusions . Early-stage recycling coupled with compositional sorting played a key role in establishing the chemical diversity of materials accreting to planetesimals and exerted a fundamental control on their thermal evolution in the early Solar System.

  • Open Access

    Comment on egusphere-2026-520

    by Gaku Nishiyama, Alexander Stark, Klaus-Dieter Matz, Christian Hüttig, Kai Wickhusen, Livio Agostini, Christian Althaus, Jan Binger, Keigo Enya, Janot George, et al.

    Post-launch characterization of the receiver telescope of the laser altimeter is essential for achieving precise georeferenced planetary measurements and for radiometric calibration to passively measure surface reflectance. For the Ganymede Laser Altimeter (GALA) aboard the Jupiter Icy Moons Explorer (Juice), such in-flight calibration was originally planned during a lunar flyby but could not be performed due to an unexpected reboot of the instrument. Instead, this study reports a passive noise measurement acquired during the Earth-farewell campaign on 9 September 2024 as an alternative opportunity for in-flight calibration. Using temporal variations in the GALA noise level as a proxy for photon flux incident on the GALA detector, we combine a theoretical noise model with Earth images obtained by the Jovis Amorum ac Natorum Undique Scrutator (JANUS) imager to constrain the GALA receiver boresight direction. By comparing the timing, magnitude, and temporal pattern of noise variations between observations and simulations, we find that the pre-launch boresight vector is inconsistent with the Earth-farewell observations. Our results further suggest that the GALA receiver boresight may have experienced a post-launch offset over 700 μrad, although a definitive conclusion can be drawn only with additional cruise-phase data. The methodology developed in this study offers a framework for in-flight alignment calibration of GALA during future flybys, which is also broadly applicable to other planetary laser altimeters. The radiometric calibration performed in study is also prerequisite for the interpretation of passive albedo measurements of Jupiter and the Galilean moons.

  • Open Access

    In-flight receiver calibration of the Ganymede Laser Altimeter (GALA) by passive Earth observations

    by Gaku Nishiyama, Alexander Stark, Klaus-Dieter Matz, Christian Hüttig, Kai Wickhusen, Livio Agostini, Christian Althaus, Jan Binger, Keigo Enya, Janot George, et al.

    Post-launch characterization of the receiver telescope of the laser altimeter is essential for achieving precise georeferenced planetary measurements and for radiometric calibration to passively measure surface reflectance. For the Ganymede Laser Altimeter (GALA) aboard the Jupiter Icy Moons Explorer (Juice), such in-flight calibration was originally planned during a lunar flyby but could not be performed due to an unexpected reboot of the instrument. Instead, this study reports a passive noise measurement acquired during the Earth-farewell campaign on 9 September 2024 as an alternative opportunity for in-flight calibration. Using temporal variations in the GALA noise level as a proxy for photon flux incident on the GALA detector, we combine a theoretical noise model with Earth images obtained by the Jovis Amorum ac Natorum Undique Scrutator (JANUS) imager to constrain the GALA receiver boresight direction. By comparing the timing, magnitude, and temporal pattern of noise variations between observations and simulations, we find that the pre-launch boresight vector is inconsistent with the Earth-farewell observations. Our results further suggest that the GALA receiver boresight may have experienced a post-launch offset over 700 μrad, although a definitive conclusion can be drawn only with additional cruise-phase data. The methodology developed in this study offers a framework for in-flight alignment calibration of GALA during future flybys, which is also broadly applicable to other planetary laser altimeters. The radiometric calibration performed in study is also prerequisite for the interpretation of passive albedo measurements of Jupiter and the Galilean moons.

  • Open Access

    Insights into Enceladus’ Interior: Structural Modeling from Moment of Inertia

    by Delaram Darivasi, Jürgen Oberst, Wladimir Neumann

    IntroductionEnceladus, Saturn’s sixth-largest moon with a radius of 252.0 ± 0.2 km [1], was visited by NASA’s Cassini spacecraft in 2005. During close flybys, Cassini used backlighting techniques to detect plumes erupting from the South Polar Terrain (SPT) [2], identifying Enceladus as the source of fine icy particles that replenish Saturn’s E ring [3]. These observations suggest the presence of a subsurface liquid water ocean [2].With a density of 1608 ± 5 kg/m³ and an icy surface [2], Enceladus appears to have an ice-rich bulk composition. Its moment of inertia (MOI) coefficient, initially estimated at 0.33–0.34 [4] and later refined to 0.336–0.339 [5], indicates a differentiated interior, likely composed of a rocky core beneath an H₂O mantle [6].In this study, we investigate a range of internal structure models and their corresponding MOI values to determine which configurations are most consistent with the spacecraft-derived MOI constraints. MethodologyThis study builds upon the internal structure models developed by [6] (called henceforth "Neumann-Kruse models"), which explored Enceladus’ thermal and differentiation evolution driven by radiogenic heating and tidal dissipation. Their models considered three rheologies for the rocky core: wet olivine, dry olivine, and antigorite. The resulting internal structures featured a differentiated body with a core radius of ~185–205 km, a porous core layer of ~2–80 km, a subsurface ocean of ~10–27 km, and an ice-rock crust of ~30–40 km. Notably, the crust was assumed to be undifferentiated, composed of a mixture of ice and rock.In this study, we refine these models by introducing rock subduction from the crust to the core, leading to core enlargement and a corresponding change in crust density. We evaluate three crust densities: 850 kg/m³ [1], 918 kg/m³, and 925 kg/m³ [7,8]. We calculated the MOI for nearly 500 internal structure models, including both the original and adjusted cases, to assess their compatibility with spacecraft-derived values. Results Figure 1 presents the calculated MOI coefficients for the differentiated Neumann-Kruse models and the adjusted models incorporating a differentiated crust with densities of 850 kg/m³ [1], 918 kg/m³, and 925 kg/m³ [7,8], for both dry and wet olivine core rheologies.Models with a crust density of 850 kg/m³ show no agreement with the MOI range derived from gravity data [5]. Similarly, models with an undifferentiated crust (1609 kg/m³) yield the lowest agreement, approximately 5% for dry olivine and 18% for wet olivine.In contrast, models with crust densities of 918 and 925 kg/m³ show significantly better alignment. For dry olivine, both densities yield about 39.5% agreement with the observed MOI. For wet olivine, the model with a crust density of 925 kg/m³ provides the highest overall agreement. In general, wet olivine models exhibit better consistency with the observed MOI range than dry olivine models.A key observation is that wet olivine models require higher core densities to match the observed MOI, whereas dry olivine models align better with lower core densities. Accepted dry olivine models typically have a porous outer core thickness ranging from ~3 to 73 km, with 55% of these models having a porous layer thinner than 5 km. For wet olivine, the range is ~2 to 80 km, and only 41% of accepted models feature a porous outer core under 5 km. This indicates that wet olivine rheology generally requires a thicker porous outer core than dry olivine. ConclusionsOur study builds upon the differentiated internal structure models proposed by [6], initially based on a rock-ice crust model. We further refined these models by incorporating a differentiated crust with varying densities. Our analysis indicates that most models, with a crust density of 925 kg/m³, align with the MOI range of [0.336–0.339] [5]. This trend persists regardless of whether the core rheology is dry or wet olivine. As expected, lower crust densities result in lower average MOI coefficients. In contrast, antigorite rheology predicts a higher MOI than the observed range, suggesting inconsistency with gravity data. Overall, our models support compatibility with spacecraft-derived constraints.AcknowledgmentThis work was supported by the Berlin University Alliance (BUA), by the Deutsche Forschungsgemeinschaft (DFG), and by the International Space Science Institute (ISSI) in Bern and Beijing, through ISSI/ISSI-BJ International Team project “Timing and Processes of Planetesimal Formation and Evolution”. References[1] P.C. Thomas. et al., Icarus 264, 37 (2016).[2] C.C. Porco. et al., Science 311, 1393 (2006).[3] F. Spahn. et al., Science 311, 1416 (2006).[4] L. Iess. et al., Science 344, 78 (2014).[5] R. S. Park et al., J. Geophys. Res. Planets 129 (2024).[6] W. Neumann and A. Kruse, The Astrophysical Journal 882, 47 (2019).[7] W.B. McKinnon, Geophysical Research Letters 42, 2137 (2015).[8] D.J. Hemingway and T. Mittal, Icarus 332, 111 (2019).

  • Open Access

    High-resolution Shape Modeling of Ryugu from an Improved Neural Implicit Method

    by Hao Chen, Philipp Gläser, Wladimir Neumann, Jürgen Oberst

    The Hayabusa-2 mission, conducted by JAXA, orbited and returned samples from asteroid (162173) Ryugu in 2018 (Watanabe et al., 2017). The Optical Navigation Camera Telescope (ONC-T) was designed to capture high-resolution images for modeling the shape of Ryugu (Watanabe et al., 2017). Currently, the publicly available shape models of Ryugu have been generated from two approaches: structure-from-motion combined with multi-view stereo (SfM-MVS; Watanabe et al., 2019), and a neural implicit method (NIM) based on neural radiance fields (NeRF; Chen et al., 2024). While these methods effectively reconstruct the asteroid’s overall geometry, they fail to accurately resolve fine surface details, highlighting the need for enhanced modeling techniques. Fortunately, the NIM shows significant promise in achieving high-fidelity 3D scene representation, even with limited image input.In this study, we used an improved NIM to perform detailed shape modeling of Ryugu and accurately reconstruct its surface morphology (Chen et al., 2025). To capture fine-scale surface features, including boulders of varying sizes and shapes, our approach introduces a multi-scale deformable grid representation that flexibly incorporates neighborhood information with different receptive fields. In addition, the 3D points generated by the SfM-MVS method are used to provide explicit geometric supervision during training, enhancing the accuracy of surface reconstruction.To evaluate the reconstruction performance, we used 61 ONC-T images acquired during the 'Box-C' operations, with a spatial resolution of approximately 0.6 to 0.7 meters. We demonstrate that our proposed NIM is capable of reliably reconstructing Ryugu’s shape from a limited number of images, yielding volume and surface area estimates that are more consistent with the SfM-MVS reference than those produced by the NIM model of Chen et al. (2024). Compared to the SfM-MVS model and the NIM model proposed by Chen et al. (2024), our method more effectively reconstructs both small-scale and large, irregularly shaped boulders, as evidenced by comparisons between real and synthetic images from 3D models. In addition, it successfully recovers terrain features in the polar regions, despite the limited coverage of the ONC-T imagery. Owing to its reduced dependency on dense image inputs, our approach also presents the potential to simplify mission planning for global shape modeling by relaxing image acquisition requirements.References:Chen et al., 2024. Neural implicit shape modeling for small planetary bodies from multi-view images using a mask-based classification sampling strategy. ISPRS Journal of Photogrammetry and Remote Sensing, 212, pp.122-145.Chen et al., 2025. Modeling the global shape and surface morphology of the Ryugu asteroid using an improved neural implicit method. Astronomy & Astrophysics, 696, p.A212.Watanabe et al., 2017. Hayabusa2 mission overview. Space Science Reviews, 208, pp.3-16.Watanabe et al., 2019. Hayabusa2 arrives at the carbonaceous asteroid 162173 Ryugu—A spinning top–shaped rubble pile. Science, 364(6437), pp.268-272.

  • Open Access

    Search for Stable Orbits around Saturn’s Moon Enceladus using Numerical Modeling

    by Sonasha Auer Wilkins, Jürgen Oberst, Alexander Stark, Hauke Hussmann, Andreas Benedikter, Wladimir Neumann

    Enceladus, a small icy moon orbiting Saturn, has become a key focus in the search for extraterrestrial life within our Solar System. Composed primarily of water ice, rock and other icy volatiles, Enceladus is part of a class of icy moons believed to harbor global oceans of liquid water underneath their crusts. With the presence of liquid water, the detection of life essential elements such as carbon, hydrogen, nitrogen, oxygen, phosphor and sulfur [1] (CHNOPS elements), and evidence of ongoing geothermal activity between the ocean and the rocky core of Enceladus [2], the moon meets the basic requirements for the existence of life and has therefore become a prime candidate for astrobiological research. To this end, the German Space Agency at DLR has launched the Enceladus Explorer (EnEx) initiative, a collaborative research project with the goal of studying Enceladus’ geophysical characteristics and searching for biosignatures by sampling the moon’s liquid subsurface water. As part of this initiative, the EnEx-RaTNOS (Radar Transponder based Navigation and Orbit Determination by Satellite) project aims to achieve precise orbit determination using radar transponders placed on Enceladus’ surface [3].The determination of stable orbits is a fundamental prerequisite for precise orbit determination and is also of high importance for topographic mapping and measuring surface deformationhrough synthetic aperture radar (SAR) imaging, as proposed in above mentioned EnEx [4] [5]. A satellite orbiting Enceladus should have a low altitude, low eccentricity and a high inclination to provide global coverage with a focus on the south polar region. However, orbits with such properties around planetary satellites are notoriously unstable, with the planet’s gravitational perturbations causing the orbiting vehicle to impact the moon within short time periods [6]. The acquisition of SAR measurements imposes additional constraints on a satellite orbit [7]. For repeat-pass SAR, the SAR image acquisition is performed over two or more time instances by a single receiver, requiring a periodic orbit in which the ground track between an initial and a repeating orbit is parallel and repeats in a body-fixed reference frame. The distance between two consecutive ground tracks is constrained by the critical baseline B, which is in the range of several hundred meters for ka-band (26-40 GHz) and several kilometers for P-band (around 300 MHz) frequencies [8]. Short repeat periods are preferable due to the risk of decorrelation caused by surface changes occurring in the time interval between two image acquisitions.This study focuses on determining stable and periodic orbits around Enceladus which fulfill the previously outlined requirements and includes a comparative evaluation of the orbit integration tools provided by the TU Delft Astrodynamics Toolbox (Tudat) and the DLR’s Particle Integrator (pInt), in order to verify the similarity of propagation results produced by both integration tools. Building on prior research by Benedikter et al. (2022) [8], a grid-search method is implemented with the goal of identifying combinations of initial values within a defined parameter space for semi-major axis, inclination and eccentricity which lead to stable and long-term repeating orbits around Enceladus. In contrast to Benedikter et al. (2022), the orbit integration is achieved using the integration method of Tudat rather than pInt and uses the more recent non-spherical gravity terms of Enceladus published by Park et al. (2024) [9]. In addition to the higher gravity terms of Enceladus, Saturn’s higher gravity terms are included as perturbing factors acting on the orbiting satellite.In order to determine likely candidates for periodic orbits, the grid-search method looks for orbits that minimize the angle between the initial orbital state vector and the state vectors within a time window after an estimated repeat period. Results of the grid-search method show range of possible solutions for periodic orbits around Enceladus which are further analyzed for long-term stability and optimized towards higher inclinations. Three example orbits, K1′, K2′ and K3′, with short repeat periods of 1.2, 2.5 and 3.8 days and mean inclinations of 56.4, 52.5 and 57.8 degrees respectively are discussed in detail and compared to the orbits with similar repeat periods identified by Benedikter et al. (2022). The K3′ orbit shows the best long-term periodicity, with no visible differences between the orbit after 80 days and the orbit after 200 days. The identified orbits are promising candidates for stable and repeating satellite trajectories as required for the EnEx mission concept and can be used as a foundation for further analysis. Results from this study will be demonstrated and discussed at the conference.References[1] Weiming Xu et al. Enough sulfur and iron for potential life make enceladus’s ocean fully habitable. The Astrophysical Journal Letters, 980(1):L10, February 2025.[2] Ligia F. Coelho and Zita Martins. The geochemistry of icy moons, pages 207–216. Elsevier, 2021.[3] J. Oberst and M. Vossiek. Gesamtvorhabensbeschreibung EnEx-RaTNOS Radartransponder basierte Navigation und Orbitbestimmung von Satelliten. Technical report, 6 2023.[4] Mark Simons et al. Crustal deformation derived from repeat-pass Interferometric SAR at Enceladus – why and how? In AAS/Division for Planetary Sciences Meeting Abstracts #55, volume 55 of AAS/Division for Planetary Sciences Meeting Abstracts, page 210.07, October 2023.[5] Andreas Benedikter et al. Performance analysis of a repeat-pass insar mission for deformation and topography mapping of Saturn’s moon Enceladus. In IGARSS 2023 - 2023 IEEE International Geoscience and Remote Sensing Symposium, pages 4177–4180. IEEE, July 2023.[6] Ryan P. Russell and Martin Lara. On the design of an enceladus science orbit. Acta...