Francesco Amato
Francesco Amato has a total of 65 co-authors. Here are the top co-authors by number of shared publications:
Gregory D. Durgin
Propagation Group, Georgia Institute of Technology
9 shared publications- Giovanni Serafino
Scuola Superiore Sant’Anna, Pisa, Italy
8 shared publications Antonella Bogoni
Scuola Superiore Sant'Anna (Italy)
5 shared publications- Gregory D. Durgin
Georgia Institute of Technology, Atlanta, GA, USA
5 shared publications Paolo Ghelfi
CNIT (Italy)
5 shared publications- Gaetano Marrocco
University of Rome Tor Vergata
4 shared publications
Latest Publications
- 25 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 6, 629-636
Design and Experimental Characterization of On-Skin Loop Antenna for Next 5G Backscattering-Based Communications
Backscattering-based communications are promising solutions for large scale body-centric monitoring systems, for the low power requirements and the simple and lightweight electronics. Currently, UHF frequency band represents the golden standard, mainly thanks to the well assessed Radio Frequency IDentification (RFID) technology. However, early studies proposed the exploitation to the upcoming 5G communication infrastructures to overcome the limitations in bit-rate and bandwidth and the need of a dedicated reading platform to interact with the tags. The aim of the work is to experimentally verify, from the antenna perspective, the possibility to adopt the 5G 3.6 GHz frequency band also for the next generation body-centric backscattering systems. An epidermal loop antenna is hence designed and prototyped. Measurements in real conditions, e.g. on the human body and through a custom testbed emulating a real backscattering link, are presented as well as statistical analysis on human variability. Results over five volunteers confirm the possibility to read the epidermal tag up to 1.2 m, hence enabling monitoring within a medium-size room.
- 25 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 6, 629-636
Design and Experimental Characterization of On-Skin Loop Antenna for Next 5G Backscattering-Based Communications
Backscattering-based communications are promising solutions for large scale body-centric monitoring systems, for the low power requirements and the simple and lightweight electronics. Currently, UHF frequency band represents the golden standard, mainly thanks to the well assessed Radio Frequency IDentification (RFID) technology. However, early studies proposed the exploitation to the upcoming 5G communication infrastructures to overcome the limitations in bit-rate and bandwidth and the need of a dedicated reading platform to interact with the tags. The aim of the work is to experimentally verify, from the antenna perspective, the possibility to adopt the 5G 3.6 GHz frequency band also for the next generation body-centric backscattering systems. An epidermal loop antenna is hence designed and prototyped. Measurements in real conditions, e.g. on the human body and through a custom testbed emulating a real backscattering link, are presented as well as statistical analysis on human variability. Results over five volunteers confirm the possibility to read the epidermal tag up to 1.2 m, hence enabling monitoring within a medium-size room.
- 12 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 5 (4) , 397-406
Fine-Scale Phase-Based Ranging Through Walls and Obstructions Using Tunneling RFID Tags
Tunneling tags have already shown their long-range capability for communications and localization in line-of-sight (LoS) with a reader operating in the 5.8 GHz band. In this paper, a received signal phase-based positioning method is investigated using semi-passive and tunneling radio frequency identification (RFID) tags in various non-line-of-sight (NLoS) environments. Experimental results show that a tunneling tag achieves gains above 10.2 dB and 19.6 dB when communicating through a cinder block and a plaster wall, respectively. When using the tunneling tag, with proper calibration, an average distance estimation accuracy of 1.33% and 2.37% is achieved in a hallway and classroom environment with clear LoS. An average estimation error of 1.03% and 2.12% is observed in through-obstruction and through-wall NLOS conditions, respectively.
- 12 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 5 (4) , 397-406
Fine-Scale Phase-Based Ranging Through Walls and Obstructions Using Tunneling RFID Tags
Tunneling tags have already shown their long-range capability for communications and localization in line-of-sight (LoS) with a reader operating in the 5.8 GHz band. In this paper, a received signal phase-based positioning method is investigated using semi-passive and tunneling radio frequency identification (RFID) tags in various non-line-of-sight (NLoS) environments. Experimental results show that a tunneling tag achieves gains above 10.2 dB and 19.6 dB when communicating through a cinder block and a plaster wall, respectively. When using the tunneling tag, with proper calibration, an average distance estimation accuracy of 1.33% and 2.37% is achieved in a hallway and classroom environment with clear LoS. An average estimation error of 1.03% and 2.12% is observed in through-obstruction and through-wall NLOS conditions, respectively.
- 30 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 5 (2) , 163-173
A Phase-Based Ranging Method for Long-Range RFID Positioning With Quantum Tunneling Tags
This work demonstrates the ability to extend the positioning range of low-powered RFID tags to distances usually not achievable with other wireless or conventional RFID technologies. The technique is performed through a Received Signal Phase (RSP)-based method on a 5.8 GHz backscatter tunneling tag, in multipath-rich indoor and outdoor environments, at distances up to 35 meters from the reader. Distance errors as low as 0.1% of the total reader-to-tag distance were observed with average errors of 0.8% and 0.6% for indoor and outdoor environments, respectively. Compared to Received Signal Strength (RSS)-based techniques, the average distance estimation accuracy is improved by a factor of 51 and 38 for indoor and outdoor environments, respectively. Moreover, an Effective Isotropic Radiated Power (EIRP) of only 10.5 dBm and a biasing power for the tunneling tag of only 21.3 μW at 80 mV promise a low-power, long-range sub-meter scale positioning technique with a projected maximum range over 1 km.
- 30 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 5 (2) , 163-173
A Phase-Based Ranging Method for Long-Range RFID Positioning With Quantum Tunneling Tags
This work demonstrates the ability to extend the positioning range of low-powered RFID tags to distances usually not achievable with other wireless or conventional RFID technologies. The technique is performed through a Received Signal Phase (RSP)-based method on a 5.8 GHz backscatter tunneling tag, in multipath-rich indoor and outdoor environments, at distances up to 35 meters from the reader. Distance errors as low as 0.1% of the total reader-to-tag distance were observed with average errors of 0.8% and 0.6% for indoor and outdoor environments, respectively. Compared to Received Signal Strength (RSS)-based techniques, the average distance estimation accuracy is improved by a factor of 51 and 38 for indoor and outdoor environments, respectively. Moreover, an Effective Isotropic Radiated Power (EIRP) of only 10.5 dBm and a biasing power for the tunneling tag of only 21.3 μW at 80 mV promise a low-power, long-range sub-meter scale positioning technique with a projected maximum range over 1 km.
- 9 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Letters
- Vol. 4 (11) , 1-4
Experimental Assessment of Wireless Monitoring of Axilla Temperature by Means of Epidermal Battery-Less RFID Sensors
Wireless epidermal devices (WEDs), based on UHF radio frequency identification (RFID), enable a contactless and noninvasive human body monitoring through sampling of health parameters directly on the skin. With reference to body temperature, this letter reports an experimental campaign aimed at assessing the degree of agreement of a battery-less plaster-like WED, placed in the armpit region, with a standard axilla thermocouple thermometer. A measurement campaign over 10 volunteers, for overall 120 temperature outcomes, revealed a good correlation among the instruments (Person's coefficient p = 0.78) and a difference of less than 0.6 °C in the 95% of the measured cases, provided that a user-calibration is applied. RFID-WED enables a noncontacting reading up to 20 cm and direct connectivity with a cloud architecture. Envisaged applications are the periodic monitoring in clinical and domestic scenarios, as well as the screening of restricted communities related to COVID-19 control and recovery.
- 9 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Letters
- Vol. 4 (11) , 1-4
Experimental Assessment of Wireless Monitoring of Axilla Temperature by Means of Epidermal Battery-Less RFID Sensors
Wireless epidermal devices (WEDs), based on UHF radio frequency identification (RFID), enable a contactless and noninvasive human body monitoring through sampling of health parameters directly on the skin. With reference to body temperature, this letter reports an experimental campaign aimed at assessing the degree of agreement of a battery-less plaster-like WED, placed in the armpit region, with a standard axilla thermocouple thermometer. A measurement campaign over 10 volunteers, for overall 120 temperature outcomes, revealed a good correlation among the instruments (Person's coefficient p = 0.78) and a difference of less than 0.6 °C in the 95% of the measured cases, provided that a user-calibration is applied. RFID-WED enables a noncontacting reading up to 20 cm and direct connectivity with a cloud architecture. Envisaged applications are the periodic monitoring in clinical and domestic scenarios, as well as the screening of restricted communities related to COVID-19 control and recovery.
- Open Access
- 19 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 4 (3) , 170-175
IEEE Council on Radio-Frequency Identification: History, Present, and Future Vision
This article summarizes the history and present state of the IEEE Council on Radio-Frequency Identification (CRFID). The aim, scope, and achievement of CRFID on technical & academic activities, academic publications, and membership services & education are highlighted, which describe how CRFID commits and grows resources to achieve its goals for its technical communities. This article also provides the vision and path to the council’s future, and on this path, CRFID is broadening the technological frontiers of IoT, Blockchain, Cyber-Physical Systems (CPS), Cyber-Physical Social Systems (CPSS), Digital Twins, Parallel Systems, Parallel Intelligence, and many other related enabling and transformational techniques.
- 19 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 4 (3) , 170-175
Open AccessIEEE Council on Radio-Frequency Identification: History, Present, and Future Vision
This article summarizes the history and present state of the IEEE Council on Radio-Frequency Identification (CRFID). The aim, scope, and achievement of CRFID on technical & academic activities, academic publications, and membership services & education are highlighted, which describe how CRFID commits and grows resources to achieve its goals for its technical communities. This article also provides the vision and path to the council’s future, and on this path, CRFID is broadening the technological frontiers of IoT, Blockchain, Cyber-Physical Systems (CPS), Cyber-Physical Social Systems (CPSS), Digital Twins, Parallel Systems, Parallel Intelligence, and many other related enabling and transformational techniques.
- 15 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 4 (4) , 398-405
Performance and Durability of Thread Antennas as Stretchable Epidermal UHF RFID Tags
Epidermal sensors based on battery-less Radiofrequency Identification (RFID) aim at collecting biophysical parameters with a high level of comfort for the user. This paper investigates the performance and durability of epidermal RFID tags, equipped with a self-tuning RFID IC, that are based either on copper wires or conductive yarns. The tags are deployed onto an ultra-thin stretchable and transparent substrate to achieve comformability to body discontinuities. A statistical analysis on volunteers showed that, in the whole UHF band (860-960 MHz), reliable read ranges of 1 m are easily achieved while up to 2 m can be reached in some favorable configurations. Both tags withstand wear, mechanical stress due to the movements of the body, sweating, and water. In particular, the tag made of conductive yarn lasts for more than 20 days. This new family of epidermal tags is moreover suitable for low-cost and large-scale manufacturing through the widely available machines used for wire-laying, bending, and shaping.
- 15 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 4 (4) , 398-405
Performance and Durability of Thread Antennas as Stretchable Epidermal UHF RFID Tags
Epidermal sensors based on battery-less Radiofrequency Identification (RFID) aim at collecting biophysical parameters with a high level of comfort for the user. This paper investigates the performance and durability of epidermal RFID tags, equipped with a self-tuning RFID IC, that are based either on copper wires or conductive yarns. The tags are deployed onto an ultra-thin stretchable and transparent substrate to achieve comformability to body discontinuities. A statistical analysis on volunteers showed that, in the whole UHF band (860-960 MHz), reliable read ranges of 1 m are easily achieved while up to 2 m can be reached in some favorable configurations. Both tags withstand wear, mechanical stress due to the movements of the body, sweating, and water. In particular, the tag made of conductive yarn lasts for more than 20 days. This new family of epidermal tags is moreover suitable for low-cost and large-scale manufacturing through the widely available machines used for wire-laying, bending, and shaping.
- 27 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 4 (3) , 176-185
Epidermal Backscattering Antennas in the 5G Framework: Performance and Perspectives
Epidermal RFIDs, if integrated within the nextgeneration (5G) wireless architecture, would enable low-cost healthcare applications for remote monitoring of patients, realtime telesurgery, and augmented sensing abilities. This paper explores, through simulations and preliminary experiments, epidermal 5G-RFIDs operating both at microwave and mmWave frequencies. In particular, it identifies the maximum gains of epidermal antennas at their optimal sizes, the achievable read ranges of passive 5G-RFID links, and their possible data-rates. Moreover, it demonstrates the compliance with electromagnetic exposure regulations and explores the benefits of epidermal arrays. Loop transponders at microwave frequencies (3.6 GHz) could provide the same read distance (one meter) of their UHF counterparts while having a smaller footprint (17 × 17 mm) and reaching a theoretical data-rate as high as 0.5 Gbps. At 28 GHz and 60 GHz, instead, arrays could be used to both achieve comparable performances and enable beamsteering.
- 27 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 4 (3) , 176-185
Epidermal Backscattering Antennas in the 5G Framework: Performance and Perspectives
Epidermal RFIDs, if integrated within the nextgeneration (5G) wireless architecture, would enable low-cost healthcare applications for remote monitoring of patients, realtime telesurgery, and augmented sensing abilities. This paper explores, through simulations and preliminary experiments, epidermal 5G-RFIDs operating both at microwave and mmWave frequencies. In particular, it identifies the maximum gains of epidermal antennas at their optimal sizes, the achievable read ranges of passive 5G-RFID links, and their possible data-rates. Moreover, it demonstrates the compliance with electromagnetic exposure regulations and explores the benefits of epidermal arrays. Loop transponders at microwave frequencies (3.6 GHz) could provide the same read distance (one meter) of their UHF counterparts while having a smaller footprint (17 × 17 mm) and reaching a theoretical data-rate as high as 0.5 Gbps. At 28 GHz and 60 GHz, instead, arrays could be used to both achieve comparable performances and enable beamsteering.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 380-383
Self-Tuning UHF Epidermal Antennas
Epidermal sensors based on Radiofrequency Identification are suitable to be attached onto the skin like a thin and flexible plaster and allow collecting biophysical parameters with a high level of comfort for the user. When working in the UHF band (860-960 MHz), the on-skin antenna performance (impedance matching and the corresponding read distance) is strongly dependent on the region of the human body where it is attached and by the body mass of the user. The self-tuning UHF epidermal RFID tag, based on a multi-state RFID IC, is a placement-robust RFID skin device that can automatically and dynamically modify its internal impedance depending of the boundary condition seen by the antenna. The epidermal sensor, also capable to measure skin temperature, preserves a realized gain variation of \pm 2.5 dB for applications in the same part of the body of some volunteers. It provides a read distance of more than 1 m in the whole worldwide RFID band (860-960MHz), with 60% of probability, for any considered positions and users and up to 90% of probability in case of application on abdomen or arms.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 380-383
Self-Tuning UHF Epidermal Antennas
Epidermal sensors based on Radiofrequency Identification are suitable to be attached onto the skin like a thin and flexible plaster and allow collecting biophysical parameters with a high level of comfort for the user. When working in the UHF band (860-960 MHz), the on-skin antenna performance (impedance matching and the corresponding read distance) is strongly dependent on the region of the human body where it is attached and by the body mass of the user. The self-tuning UHF epidermal RFID tag, based on a multi-state RFID IC, is a placement-robust RFID skin device that can automatically and dynamically modify its internal impedance depending of the boundary condition seen by the antenna. The epidermal sensor, also capable to measure skin temperature, preserves a realized gain variation of \pm 2.5 dB for applications in the same part of the body of some volunteers. It provides a read distance of more than 1 m in the whole worldwide RFID band (860-960MHz), with 60% of probability, for any considered positions and users and up to 90% of probability in case of application on abdomen or arms.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 244-247
The Harmonic Tunneling Tag: a Dual-Band Approach to Backscattering Communications
As an answer to the self-interference problem inherent to RFID systems, this work proposes a dual-band backscattering architecture. A dual-band RFID system architecture can bring several advantages to the RFID technology. In fact, a dual-band reader could operate without any self-interference cancellation circuit that currently limits its sensitivity; moreover, its dual-band architecture would be compatible with software defined radio-based cellphones. Dual-band readers will need to talk with low-powered dual-band tags that up-convert, modulate, and backscatter the impinging signal from the fundamental frequency to the 2 nd harmonic without weakening the communication link. This article reports on the UHF dual-band Harmonic Tunneling Tag capable of backscattering and amplifying a 900 MHz signal when receiving an input carrier at 450 MHz. The Harmonic Tunneling Tag provides positive conversion gains (+7 dB) that improve the communication link by a factor of 2 and operates under a very low bias voltage of 0.16 V.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 244-247
The Harmonic Tunneling Tag: a Dual-Band Approach to Backscattering Communications
As an answer to the self-interference problem inherent to RFID systems, this work proposes a dual-band backscattering architecture. A dual-band RFID system architecture can bring several advantages to the RFID technology. In fact, a dual-band reader could operate without any self-interference cancellation circuit that currently limits its sensitivity; moreover, its dual-band architecture would be compatible with software defined radio-based cellphones. Dual-band readers will need to talk with low-powered dual-band tags that up-convert, modulate, and backscatter the impinging signal from the fundamental frequency to the 2 nd harmonic without weakening the communication link. This article reports on the UHF dual-band Harmonic Tunneling Tag capable of backscattering and amplifying a 900 MHz signal when receiving an input carrier at 450 MHz. The Harmonic Tunneling Tag provides positive conversion gains (+7 dB) that improve the communication link by a factor of 2 and operates under a very low bias voltage of 0.16 V.
- Open Access
- 12 July 2019
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11180, 259
Photonic integrated circuits for ultra-fast steering in phased-array antennas
The envisioned next generation satellite communication networks will guarantee high throughput to the users, relying on the increased bandwidth available at higher frequencies, ranging from the Ku-band in the proposed OneWebb constellation, up to the V-band that is considered by the StarLink constellation.
- 12 July 2019
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11180, 259
Open AccessPhotonic integrated circuits for ultra-fast steering in phased-array antennas
The envisioned next generation satellite communication networks will guarantee high throughput to the users, relying on the increased bandwidth available at higher frequencies, ranging from the Ku-band in the proposed OneWebb constellation, up to the V-band that is considered by the StarLink constellation.