Min-Chul Park
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Min-Chul Park has a total of 360 co-authors. Here are the top co-authors by number of shared publications:
Jung-Young Son
Biomedical Engineering Dept., Konyang University, Nonsan Korea
46 shared publications- Sungchul Mun
Jeonbuk National University
17 shared publications Kwang-Hoon Lee
Korea Photonics Technology Institute (Korea, Republic of)
12 shared publicationsSung-Kyu Kim
Imaging Media Research Center, Korea Institute of Science and Technology, Seoul, Korea
11 shared publications- Jung-Young Son
Public Safety Research Center, Konyang University, Nonsan 32992, Republic of Korea
10 shared publications Thibault Leportier
Korea Institute of Science and Technology
10 shared publications
Latest Publications
- Open Access
- 10 August 2026
- Published by Wiley in Advanced Science
- Vol. 13 (61) , e77017
Unipolar Barrier Near‐Infrared 2D Photodetectors for 3D Image Sensors
Photodetectors sensitive to the near‐infrared (NIR) range are of great importance for applications in machine vision, autonomous driving, and three‐dimensional (3D) imaging under low‐light or adverse weather conditions. Recently, two‐dimensional (2D) semiconductors have emerged as promising light‐absorbing materials for NIR detection. However, the inevitable majority‐carrier injection from the electrode fundamentally leads to high dark current and poor light‐detection capability, which has constrained the development of 2D semiconductor photodetectors so far. Here, we demonstrate a high‐detectivity NIR photodetector based on a MoTe 2 /WSe 2 /Cl–SnSe 2 unipolar barrier heterostructure. The WSe 2 layer acts as an efficient majority‐carrier‐blocking barrier, effectively suppressing dark current and achieving a room‐temperature specific detectivity of 6.75 × 10 8 Jones, a linear dynamic range of 62 dB, and an effective −3 dB bandwidth approaching 0.1 MHz under 1310 nm illumination. Using this device as an imager, we show 3D NIR imaging of real objects under low‐illumination conditions, highlighting its potential for applications such as vein visualization and material identification.
- 10 August 2026
- Published by Wiley in Advanced Science
- Vol. 13 (61) , e77017
Open AccessUnipolar Barrier Near‐Infrared 2D Photodetectors for 3D Image Sensors
Photodetectors sensitive to the near‐infrared (NIR) range are of great importance for applications in machine vision, autonomous driving, and three‐dimensional (3D) imaging under low‐light or adverse weather conditions. Recently, two‐dimensional (2D) semiconductors have emerged as promising light‐absorbing materials for NIR detection. However, the inevitable majority‐carrier injection from the electrode fundamentally leads to high dark current and poor light‐detection capability, which has constrained the development of 2D semiconductor photodetectors so far. Here, we demonstrate a high‐detectivity NIR photodetector based on a MoTe 2 /WSe 2 /Cl–SnSe 2 unipolar barrier heterostructure. The WSe 2 layer acts as an efficient majority‐carrier‐blocking barrier, effectively suppressing dark current and achieving a room‐temperature specific detectivity of 6.75 × 10 8 Jones, a linear dynamic range of 62 dB, and an effective −3 dB bandwidth approaching 0.1 MHz under 1310 nm illumination. Using this device as an imager, we show 3D NIR imaging of real objects under low‐illumination conditions, highlighting its potential for applications such as vein visualization and material identification.
- Open Access
- 12 June 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Self-filtering monolithic organic/PbS quantum dot photodetector for visible and short-wave infrared selective vision in low-light
Dual-mode photodetectors with vertically stacked photoactive layers enable bias-controlled, band-selective extraction from their constituent photoactive layers. While their applications ranging from non-invasive diagnostics to optical communication demand high-fidelity detection of faint light, performance is often limited by interlayer-derived structural complexity and noise. Here, we present an interlayer-free monolithic organic/PbS photodetector that achieves visible and short-wave infrared dual-mode operation with low noise and crosstalk. Inducing vertical and lateral phase-separation in the organic layer facilitates charge carrier dynamics that yield high specific detectivity without auxiliary interlayers, enabling simple device structures that detect small signals with high precision. This strategy can be utilized in a variety of photoactive layer combinations spectrally targeted for application-specific devices. Its practicality is demonstrated through single-pixel imaging, which reconstructs high-fidelity images across visible and SWIR bands even under light attenuation. Furthermore, its dual-mode capability enables silicon alignment through registration of front- and back-side features.
- 12 June 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessSelf-filtering monolithic organic/PbS quantum dot photodetector for visible and short-wave infrared selective vision in low-light
Dual-mode photodetectors with vertically stacked photoactive layers enable bias-controlled, band-selective extraction from their constituent photoactive layers. While their applications ranging from non-invasive diagnostics to optical communication demand high-fidelity detection of faint light, performance is often limited by interlayer-derived structural complexity and noise. Here, we present an interlayer-free monolithic organic/PbS photodetector that achieves visible and short-wave infrared dual-mode operation with low noise and crosstalk. Inducing vertical and lateral phase-separation in the organic layer facilitates charge carrier dynamics that yield high specific detectivity without auxiliary interlayers, enabling simple device structures that detect small signals with high precision. This strategy can be utilized in a variety of photoactive layer combinations spectrally targeted for application-specific devices. Its practicality is demonstrated through single-pixel imaging, which reconstructs high-fidelity images across visible and SWIR bands even under light attenuation. Furthermore, its dual-mode capability enables silicon alignment through registration of front- and back-side features.
- Open Access
- 30 April 2026
- Published by Wiley in Advanced Science
- Vol. 13 (38) , e75474
A Universal Approach to Enhancing Silicon Hot‐Carrier Photodetectors for CMOS‐Compatible SWIR Imaging
Silicon hot‐carrier photodetectors offer a CMOS‐compatible pathway for short‐wavelength infrared (SWIR) detection, yet their practical deployment in imaging systems has been constrained by intrinsically low quantum efficiency. Here, we present a universal approach to enhance the quantum efficiency of silicon hot‐carrier photodetectors through the use of a quasi‐generalized antireflection coating (QARC). The QARC design enhances optical absorption by several‐fold in ultrathin metal electrodes that form the metal–silicon Schottky junction, without degrading carrier injection, and is effective regardless of the metal type or electrode thickness. Consequently, a QARC‐integrated hot‐carrier photodetector achieves a responsivity of 7.8 mA/W and an external quantum efficiency of 0.82% at 1310 nm—nearly doubling that of devices without QARC—while maintaining comparable dark current and microsecond‐scale temporal response, as demonstrated using an ultrathin copper electrode. This enhanced quantum efficiency enables the first demonstration of SWIR imaging using a CMOS‐compatible silicon hot‐carrier photodetector, offering higher signal levels and sharper features under low illumination. The silicon hot‐carrier photodetector with QARC offers a promising route toward practical, CMOS‐compatible SWIR imaging sensors.
- 30 April 2026
- Published by Wiley in Advanced Science
- Vol. 13 (38) , e75474
Open AccessA Universal Approach to Enhancing Silicon Hot‐Carrier Photodetectors for CMOS‐Compatible SWIR Imaging
Silicon hot‐carrier photodetectors offer a CMOS‐compatible pathway for short‐wavelength infrared (SWIR) detection, yet their practical deployment in imaging systems has been constrained by intrinsically low quantum efficiency. Here, we present a universal approach to enhance the quantum efficiency of silicon hot‐carrier photodetectors through the use of a quasi‐generalized antireflection coating (QARC). The QARC design enhances optical absorption by several‐fold in ultrathin metal electrodes that form the metal–silicon Schottky junction, without degrading carrier injection, and is effective regardless of the metal type or electrode thickness. Consequently, a QARC‐integrated hot‐carrier photodetector achieves a responsivity of 7.8 mA/W and an external quantum efficiency of 0.82% at 1310 nm—nearly doubling that of devices without QARC—while maintaining comparable dark current and microsecond‐scale temporal response, as demonstrated using an ultrathin copper electrode. This enhanced quantum efficiency enables the first demonstration of SWIR imaging using a CMOS‐compatible silicon hot‐carrier photodetector, offering higher signal levels and sharper features under low illumination. The silicon hot‐carrier photodetector with QARC offers a promising route toward practical, CMOS‐compatible SWIR imaging sensors.
- Open Access
- 15 April 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (16) , 12236-12249
Event-Driven Neuromorphic Gaze Decoding via e-Skin Electrooculography
Wearable eye-tracking technologies remain constrained by bulky optics, high power consumption, and reliance on external computation. We present a hardware–software codesigned electrooculography (EOG) interface that integrates ultrathin conformal e-skin sensors with resistive random-access memory (RRAM) crossbar, used to implement synaptic vector-matrix multiplication within a neuromorphic processing pipeline for real-time gaze decoding. Conformal e-skin sensors provide stable and continuous acquisition of both vertical and horizontal oculomotor signals, which are transformed into attention-guided spike features for classification by a lightweight spiking neural network (SNN). Implemented on an RRAM array with quantized weights after noise-aware training, the system achieves robust inference while substantially lowering latency and energy demand. The proposed framework is designed for local edge-level computation, thereby preserving user privacy and eliminating the need for cloud-based inference. By eliminating head-mounted optics, this glassless architecture enables unobtrusive and energy-efficient wearable interfaces. These results establish flexible bioelectronics with neuromorphic processors to advance immersive computing, assistive interfaces, and mobile health monitoring.
- 15 April 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (16) , 12236-12249
Open AccessEvent-Driven Neuromorphic Gaze Decoding via e-Skin Electrooculography
Wearable eye-tracking technologies remain constrained by bulky optics, high power consumption, and reliance on external computation. We present a hardware–software codesigned electrooculography (EOG) interface that integrates ultrathin conformal e-skin sensors with resistive random-access memory (RRAM) crossbar, used to implement synaptic vector-matrix multiplication within a neuromorphic processing pipeline for real-time gaze decoding. Conformal e-skin sensors provide stable and continuous acquisition of both vertical and horizontal oculomotor signals, which are transformed into attention-guided spike features for classification by a lightweight spiking neural network (SNN). Implemented on an RRAM array with quantized weights after noise-aware training, the system achieves robust inference while substantially lowering latency and energy demand. The proposed framework is designed for local edge-level computation, thereby preserving user privacy and eliminating the need for cloud-based inference. By eliminating head-mounted optics, this glassless architecture enables unobtrusive and energy-efficient wearable interfaces. These results establish flexible bioelectronics with neuromorphic processors to advance immersive computing, assistive interfaces, and mobile health monitoring.
- Open Access
- 20 March 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (22) , e20984
High‐Gain Ag 2 Te/MoS 2 Hybrid Photodetectors for Short‐Wave Infrared Imaging
Physical artificial intelligence has emerged as a pivotal component in next‐generation humanoid technologies, including advanced optical sensors, as it enables autonomous acquisition of sensory information. This study reports a high‐performance 0D/2D hybrid photodetector using a high‐gain Ag 2 Te/MoS 2 hybrid structure for visible to short‐wave infrared (SWIR) photodetection, achieved by the absorption of Ag 2 Te quantum dots in the infrared region (∼1450 nm). The Ag 2 Te/MoS 2 photodetector exhibits a high photoresponsivity of around 7.5 × 10 5 AW −1 and a specific detectivity of over 9.9 × 10 8 Jones at 1 µW/cm 2 illumination power with a 0.2 V drain bias voltage. Furthermore, depending on the gain of the photodetector, a fast response speed can also be achieved, with rise and decay times as short as 13 and 23 ms. The 0D/2D hybrid devices were successfully implemented in a 32 × 32 array format for infrared imaging, with the results demonstrating spatially resolved pattern reconstruction and real‐time photoresponse acquisition. By hybridizing quantum dots and 2D materials, the developed photodetector has broad potential applications, including use in highly integrated SWIR image sensors.
- 20 March 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (22) , e20984
Open AccessHigh‐Gain Ag 2 Te/MoS 2 Hybrid Photodetectors for Short‐Wave Infrared Imaging
Physical artificial intelligence has emerged as a pivotal component in next‐generation humanoid technologies, including advanced optical sensors, as it enables autonomous acquisition of sensory information. This study reports a high‐performance 0D/2D hybrid photodetector using a high‐gain Ag 2 Te/MoS 2 hybrid structure for visible to short‐wave infrared (SWIR) photodetection, achieved by the absorption of Ag 2 Te quantum dots in the infrared region (∼1450 nm). The Ag 2 Te/MoS 2 photodetector exhibits a high photoresponsivity of around 7.5 × 10 5 AW −1 and a specific detectivity of over 9.9 × 10 8 Jones at 1 µW/cm 2 illumination power with a 0.2 V drain bias voltage. Furthermore, depending on the gain of the photodetector, a fast response speed can also be achieved, with rise and decay times as short as 13 and 23 ms. The 0D/2D hybrid devices were successfully implemented in a 32 × 32 array format for infrared imaging, with the results demonstrating spatially resolved pattern reconstruction and real‐time photoresponse acquisition. By hybridizing quantum dots and 2D materials, the developed photodetector has broad potential applications, including use in highly integrated SWIR image sensors.
- 5 February 2025
- Published by Springer Nature in Nature Electronics
- Vol. 8 (4) , 298-308
Conductive-bridge interlayer contacts for two-dimensional optoelectronic devices
- 5 February 2025
- Published by Springer Nature in Nature Electronics
- Vol. 8 (4) , 298-308
Conductive-bridge interlayer contacts for two-dimensional optoelectronic devices
- Top Cited Papers
- 27 November 2023
- Published by Springer Nature in Nature Materials
- Vol. 22 (12) , 1470-1477
Monolithic 3D integration of 2D materials-based electronics towards ultimate edge computing solutions
Three-dimensional (3D) hetero-integration technology is poised to revolutionize the field of electronics by stacking functional layers vertically, thereby creating novel 3D circuity architectures with high integration density and unparalleled multifunctionality. However, the conventional 3D integration technique involves complex wafer processing and intricate interlayer wiring. Here we demonstrate monolithic 3D integration of two-dimensional, material-based artificial intelligence (AI)-processing hardware with ultimate integrability and multifunctionality. A total of six layers of transistor and memristor arrays were vertically integrated into a 3D nanosystem to perform AI tasks, by peeling and stacking of AI processing layers made from bottom-up synthesized two-dimensional materials. This fully monolithic-3D-integrated AI system substantially reduces processing time, voltage drops, latency and footprint due to its densely packed AI processing layers with dense interlayer connectivity. The successful demonstration of this monolithic-3D-integrated AI system will not only provide a material-level solution for hetero-integration of electronics, but also pave the way for unprecedented multifunctional computing hardware with ultimate parallelism.
- 27 November 2023
- Published by Springer Nature in Nature Materials
- Vol. 22 (12) , 1470-1477
Top Cited PapersMonolithic 3D integration of 2D materials-based electronics towards ultimate edge computing solutions
Three-dimensional (3D) hetero-integration technology is poised to revolutionize the field of electronics by stacking functional layers vertically, thereby creating novel 3D circuity architectures with high integration density and unparalleled multifunctionality. However, the conventional 3D integration technique involves complex wafer processing and intricate interlayer wiring. Here we demonstrate monolithic 3D integration of two-dimensional, material-based artificial intelligence (AI)-processing hardware with ultimate integrability and multifunctionality. A total of six layers of transistor and memristor arrays were vertically integrated into a 3D nanosystem to perform AI tasks, by peeling and stacking of AI processing layers made from bottom-up synthesized two-dimensional materials. This fully monolithic-3D-integrated AI system substantially reduces processing time, voltage drops, latency and footprint due to its densely packed AI processing layers with dense interlayer connectivity. The successful demonstration of this monolithic-3D-integrated AI system will not only provide a material-level solution for hetero-integration of electronics, but also pave the way for unprecedented multifunctional computing hardware with ultimate parallelism.
- Open Access
- 10 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 78623-78643
Recurrent DETR: Transformer-Based Object Detection for Crowded Scenes
Recent Transformer-based object detectors have achieved remarkable performance on benchmark datasets, but few have addressed the real-world challenge of object detection in crowded scenes using transformers. This limitation stems from the fixed query set size of the transformer decoder, which restricts the model’s inference capacity. To overcome this challenge, we propose Recurrent Detection Transformer (Recurrent DETR), an object detector that iterates the decoder block to render more predictions with a finite number of query tokens. Recurrent DETR can adaptively control the number of decoder block iterations based on the image’s crowdedness or complexity, resulting in a variable-size prediction set. This is enabled by our novel Pondering Hungarian Loss, which helps the model to learn when additional computation is required to identify all the objects in a crowded scene. We demonstrate the effectiveness of Recurrent DETR on two datasets: COCO 2017, which represents a standard setting, and CrowdHuman, which features a crowded setting. Our experiments on both datasets show that Recurrent DETR achieves significant performance gains of 0.8 AP and 0.4 AP, respectively, over its base architectures. Moreover, we conduct comprehensive analyses under different query set size constraints to provide a thorough evaluation of our proposed method.
- 10 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 78623-78643
Open AccessRecurrent DETR: Transformer-Based Object Detection for Crowded Scenes
Recent Transformer-based object detectors have achieved remarkable performance on benchmark datasets, but few have addressed the real-world challenge of object detection in crowded scenes using transformers. This limitation stems from the fixed query set size of the transformer decoder, which restricts the model’s inference capacity. To overcome this challenge, we propose Recurrent Detection Transformer (Recurrent DETR), an object detector that iterates the decoder block to render more predictions with a finite number of query tokens. Recurrent DETR can adaptively control the number of decoder block iterations based on the image’s crowdedness or complexity, resulting in a variable-size prediction set. This is enabled by our novel Pondering Hungarian Loss, which helps the model to learn when additional computation is required to identify all the objects in a crowded scene. We demonstrate the effectiveness of Recurrent DETR on two datasets: COCO 2017, which represents a standard setting, and CrowdHuman, which features a crowded setting. Our experiments on both datasets show that Recurrent DETR achieves significant performance gains of 0.8 AP and 0.4 AP, respectively, over its base architectures. Moreover, we conduct comprehensive analyses under different query set size constraints to provide a thorough evaluation of our proposed method.
- Top Cited Papers
- 19 August 2022
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 377 (6608) , 859-864
Chip-less wireless electronic skins by remote epitaxial freestanding compound semiconductors
Recent advances in flexible and stretchable electronics have led to a surge of electronic skin (e-skin)–based health monitoring platforms. Conventional wireless e-skins rely on rigid integrated circuit chips that compromise the overall flexibility and consume considerable power. Chip-less wireless e-skins based on inductor-capacitor resonators are limited to mechanical sensors with low sensitivities. We report a chip-less wireless e-skin based on surface acoustic wave sensors made of freestanding ultrathin single-crystalline piezoelectric gallium nitride membranes. Surface acoustic wave–based e-skin offers highly sensitive, low-power, and long-term sensing of strain, ultraviolet light, and ion concentrations in sweat. We demonstrate weeklong monitoring of pulse. These results present routes to inexpensive and versatile low-power, high-sensitivity platforms for wireless health monitoring devices.
- 19 August 2022
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 377 (6608) , 859-864
Top Cited PapersChip-less wireless electronic skins by remote epitaxial freestanding compound semiconductors
Recent advances in flexible and stretchable electronics have led to a surge of electronic skin (e-skin)–based health monitoring platforms. Conventional wireless e-skins rely on rigid integrated circuit chips that compromise the overall flexibility and consume considerable power. Chip-less wireless e-skins based on inductor-capacitor resonators are limited to mechanical sensors with low sensitivities. We report a chip-less wireless e-skin based on surface acoustic wave sensors made of freestanding ultrathin single-crystalline piezoelectric gallium nitride membranes. Surface acoustic wave–based e-skin offers highly sensitive, low-power, and long-term sensing of strain, ultraviolet light, and ion concentrations in sweat. We demonstrate weeklong monitoring of pulse. These results present routes to inexpensive and versatile low-power, high-sensitivity platforms for wireless health monitoring devices.
- 8 February 2022
- Published by Optica Publishing Group in Optics Letters
- Vol. 47 (4) , 866-869
Integral imaging using a MoS2 Schottky diode
We report the performance of a MoS2 Schottky diode on three-dimensional (3D) integral imaging. The MoS2 Schottky diode has asymmetric Pt electrodes for the Schottky contact and Ti/Au electrodes for the ohmic contact. Such a Schottky diode exhibits an excellent rectification ratio of 103, a broad spectral photoresponse in the 450–700 nm range, an almost ideal linearity of 1, and a wide linear dynamic range of 106 dB. We successfully conduct object pickup experiments using integral imaging and validate the feasibility of a single-pixel imager as a 3D image sensor.
- 8 February 2022
- Published by Optica Publishing Group in Optics Letters
- Vol. 47 (4) , 866-869
Integral imaging using a MoS2 Schottky diode
We report the performance of a MoS2 Schottky diode on three-dimensional (3D) integral imaging. The MoS2 Schottky diode has asymmetric Pt electrodes for the Schottky contact and Ti/Au electrodes for the ohmic contact. Such a Schottky diode exhibits an excellent rectification ratio of 103, a broad spectral photoresponse in the 450–700 nm range, an almost ideal linearity of 1, and a wide linear dynamic range of 106 dB. We successfully conduct object pickup experiments using integral imaging and validate the feasibility of a single-pixel imager as a 3D image sensor.