Shivani Pathania
Research Subjects
Research Interests
Shivani Pathania has a total of 86 co-authors. Here are the top co-authors by number of shared publications:
Brijesh K. Tiwari
Food Chemistry and Technology Department, Teagasc Food Research Centre, Ashtown, D15 DY05, Dublin, Ireland
5 shared publications- Brijesh Kumar Tiwari
Teagasc - The Irish Agriculture and Food Development Authority
4 shared publications Monjurul Hoque
Food Industry Development Department, Teagasc Food Research Centre, Ashtown, D15 DY05, Dublin, Ireland; Food Packaging and Material Science Group, School of Food and Nutritional Sciences, University College Cork, T12 R229, Ireland
4 shared publications- Carla Brites
National Institute for Agricultural and Veterinary Research (INIAV), I.P., Av. da República, Quinta do Marquês, 2780-157 Oeiras, Portugal
3 shared publications Ciara McDonagh
3 shared publications- Ciara McDonagh
Food Industry Development Department, Teagasc Food Research Centre, Ashtown, D15 KN3K Dublin, Ireland
3 shared publications
Latest Publications
- Open Access
- 23 June 2026
- Published by Wiley in Legume Science
- Vol. 8 (2) , e70133
Ultrasound‐Assisted Sequential Extraction of Water and Alkali Soluble Proteins From Faba Bean and Pea Varieties and Their Techno‐Functional Properties
Plant proteins have emerged as key components in modern food innovation. Protein extraction from legumes is well established commercially; however, studies on variations in crop varieties that can significantly affect extraction yields and functional properties are scarce. This study therefore investigates the impact of four pea (‘CARRINGTON’, ‘KARIOKA’, ‘ORCHESTRA’ and ‘MANTARA’) and eight faba bean varieties (‘AUGUSTA’, ‘IRENA’, ‘TUNDRA’, ‘VESPA’, ‘CARTOUCHE’, ‘FANFARE’, ‘LYNX’ and ‘TIFFANY’) on protein recovery and techno‐functional characteristics. It compares conventional extraction (CE) and ultrasound‐assisted extraction (UAE) using sequential isolation of water‐ and alkali‐soluble proteins. All faba bean varieties (25.29%–30.37%) had significantly higher protein content than the pea varieties (17.72%–19.99%). UAE resulted in higher average protein recovery (68.92%) than CE (58.50%). However, UAE water‐soluble extracts had lower average protein content (62.53%) than CE (76.56%), with the same pattern in alkali‐soluble extracts (UAE: 61.48%; CE: 76.16%). Functional properties improved with UAE: WAC and OAC of water‐soluble fractions increased 1.75‐ and 1.24‐fold over CE; alkali‐soluble WAC rose 1.52‐fold. In gelling, four UAE faba bean and three pea varieties gelled at 14% versus 16% for CE. UAE resulted in proteins with higher elastic (G′) and viscous (G″) modulus compared with CE. Second‐derivative FTIR analysis of the amide I region showed clear alterations in protein secondary structure. SEM imaging revealed ruptured, disintegrated surfaces in UAE residues versus CE. This study verifies that ultrasound promotes pea and faba bean protein extraction and functionality.
- 23 June 2026
- Published by Wiley in Legume Science
- Vol. 8 (2) , e70133
Open AccessUltrasound‐Assisted Sequential Extraction of Water and Alkali Soluble Proteins From Faba Bean and Pea Varieties and Their Techno‐Functional Properties
Plant proteins have emerged as key components in modern food innovation. Protein extraction from legumes is well established commercially; however, studies on variations in crop varieties that can significantly affect extraction yields and functional properties are scarce. This study therefore investigates the impact of four pea (‘CARRINGTON’, ‘KARIOKA’, ‘ORCHESTRA’ and ‘MANTARA’) and eight faba bean varieties (‘AUGUSTA’, ‘IRENA’, ‘TUNDRA’, ‘VESPA’, ‘CARTOUCHE’, ‘FANFARE’, ‘LYNX’ and ‘TIFFANY’) on protein recovery and techno‐functional characteristics. It compares conventional extraction (CE) and ultrasound‐assisted extraction (UAE) using sequential isolation of water‐ and alkali‐soluble proteins. All faba bean varieties (25.29%–30.37%) had significantly higher protein content than the pea varieties (17.72%–19.99%). UAE resulted in higher average protein recovery (68.92%) than CE (58.50%). However, UAE water‐soluble extracts had lower average protein content (62.53%) than CE (76.56%), with the same pattern in alkali‐soluble extracts (UAE: 61.48%; CE: 76.16%). Functional properties improved with UAE: WAC and OAC of water‐soluble fractions increased 1.75‐ and 1.24‐fold over CE; alkali‐soluble WAC rose 1.52‐fold. In gelling, four UAE faba bean and three pea varieties gelled at 14% versus 16% for CE. UAE resulted in proteins with higher elastic (G′) and viscous (G″) modulus compared with CE. Second‐derivative FTIR analysis of the amide I region showed clear alterations in protein secondary structure. SEM imaging revealed ruptured, disintegrated surfaces in UAE residues versus CE. This study verifies that ultrasound promotes pea and faba bean protein extraction and functionality.
- 9 October 2025
- Published by Elsevier in Food Bioscience
- Vol. 73
Chitosan extraction by ultrasound-assisted extraction from acid- or pepsin-pretreated shrimp shells
- 9 October 2025
- Published by Elsevier in Food Bioscience
- Vol. 73
Chitosan extraction by ultrasound-assisted extraction from acid- or pepsin-pretreated shrimp shells
- 16 May 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 314, 144302
Banana sheath cellulose extraction and incorporation into pectin/carrageenan film employing linalool: fabrication and comprehensive characterisation of physical and antimicrobial properties as potential food packaging applications
- 16 May 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 314, 144302
Banana sheath cellulose extraction and incorporation into pectin/carrageenan film employing linalool: fabrication and comprehensive characterisation of physical and antimicrobial properties as potential food packaging applications
- 14 April 2025
- Published by Elsevier in Food Chemistry
- Vol. 483, 144347
Osborne fractionation and techno-functional properties of Faba bean flours from eight varieties grown under a temperate maritime climate
- 14 April 2025
- Published by Elsevier in Food Chemistry
- Vol. 483, 144347
Osborne fractionation and techno-functional properties of Faba bean flours from eight varieties grown under a temperate maritime climate
- 23 February 2025
- Published by Springer Nature
- p. 249-273
IoT and Digital Twins for Ssmart Food Supply Chains
- 23 February 2025
- Published by Springer Nature
- p. 249-273
IoT and Digital Twins for Ssmart Food Supply Chains
- Open Access
- 6 January 2025
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 60 (1)
Quality parameters and shelf life of strawberry (cv. Centenary) fruits as affected by active modified atmosphere packaging
Modified atmosphere packaging (MAP) has gained attention from commercial horticulturalists in extending the shelf life of bulk and retail packaged fresh produce such as strawberries. Storing strawberries in an atmosphere with optimised gas composition containing carbon dioxide concentration from 15% to 30% and the oxygen concentration from 7.5% to 10% can provide an optimised condition to maintain quality and extend shelf life of strawberries at low temperatures. Therefore this study aimed to investigate the effect of active MAP, 3 different gas mixes namely: MAP1 (10 O2, 15% CO2, 75% N2); MAP2 (7.5 O2, 17.5% CO2, 75% N2), MAP3 (30% CO2, 70% N2), and passive MAP as a control conventional packaging on changes in gas composition, total soluble solid, colour, electrolyte leakage and density of fresh strawberries during 15 days storage period at 4 °C and 99.9% RH. Strawberries packaged in commercial packaging polyethylene terephthalate (PET) punnet and PET lidding with macro perforated, a mix of 3, 8 mm diameter hole with four 5 mm × 15 mm rectangular holes on PET lidding film under normal atmosphere was studied as a control sample. Freshly harvested strawberries were packaged in a PET punnet with PET/polyethylene as lidding film using an automatic tray sealer. The packaged strawberries were stored at 4 °C. Storage studies revealed that significantly higher CO2 and negligible O2 concentration in MAP3 compared to the control packaging system. Greater electrolyte leakage was observed for the treatment with higher (30%) CO2 and commercial packaged sample with higher O2 concentration on 13th day of storage (p < .05). No significant difference in density value was observed for all the treatments. L* value showed a decreasing trend in strawberries stored in commercial package with higher O2 concentration for 13 days, while it was well maintained in the MAP2 and MAP1 treatments containing 7.5 and 10% O2 up to 15 days.
- 6 January 2025
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 60 (1)
Open AccessQuality parameters and shelf life of strawberry (cv. Centenary) fruits as affected by active modified atmosphere packaging
Modified atmosphere packaging (MAP) has gained attention from commercial horticulturalists in extending the shelf life of bulk and retail packaged fresh produce such as strawberries. Storing strawberries in an atmosphere with optimised gas composition containing carbon dioxide concentration from 15% to 30% and the oxygen concentration from 7.5% to 10% can provide an optimised condition to maintain quality and extend shelf life of strawberries at low temperatures. Therefore this study aimed to investigate the effect of active MAP, 3 different gas mixes namely: MAP1 (10 O2, 15% CO2, 75% N2); MAP2 (7.5 O2, 17.5% CO2, 75% N2), MAP3 (30% CO2, 70% N2), and passive MAP as a control conventional packaging on changes in gas composition, total soluble solid, colour, electrolyte leakage and density of fresh strawberries during 15 days storage period at 4 °C and 99.9% RH. Strawberries packaged in commercial packaging polyethylene terephthalate (PET) punnet and PET lidding with macro perforated, a mix of 3, 8 mm diameter hole with four 5 mm × 15 mm rectangular holes on PET lidding film under normal atmosphere was studied as a control sample. Freshly harvested strawberries were packaged in a PET punnet with PET/polyethylene as lidding film using an automatic tray sealer. The packaged strawberries were stored at 4 °C. Storage studies revealed that significantly higher CO2 and negligible O2 concentration in MAP3 compared to the control packaging system. Greater electrolyte leakage was observed for the treatment with higher (30%) CO2 and commercial packaged sample with higher O2 concentration on 13th day of storage (p < .05). No significant difference in density value was observed for all the treatments. L* value showed a decreasing trend in strawberries stored in commercial package with higher O2 concentration for 13 days, while it was well maintained in the MAP2 and MAP1 treatments containing 7.5 and 10% O2 up to 15 days.
- Open Access
- 6 January 2025
- Published by Wiley in Journal of Food Processing and Preservation
- Vol. 2025 (1)
Ultrasonication‐Induced Modification of Finger Millet and Barnyard Millet Flours: Phytoconstituents and Antioxidant Capacity, Functional Properties, and Microstructural Arrangement
The current study is aimed at studying the effect of ultrasonication on finger millet and barnyard millet flours which were processed for 10, 15, and 20 min at a constant amplitude of 30% and 30 kHz frequency at a maximum power of 750 W and 220 V. Ultrasonication resulted in modification of functional, structural, color, thermal, and molecular interactions and bioactive properties of millet flours. Ultrasonication resulted in decrement of water absorption capacity (1.51–1.36 and 1.51–1.05 g/g), swelling power (7.68–5.34 and 5.87–4.50 g/g), and foaming stability, while an increment was observed in water solubility index (3.59–8.41% and 3.03–10.94%), oil absorption capacity (1.98–2.16 g/g and 1.93–2.07 g/g), foaming capacity (12.00–17.00% and 18.00–25.00%), and paste clarity (51.20–61.00%T and 58.50–63.60%T) in finger millet and barnyard flours. An increase in bioactive components was observed till 15 min was observed, followed by reduction on further treatment. Ultrasonication triggers cavitation, which causes cell wall fractures and subsequent breakdown, ultimately reducing particle size. The resulting particle size reduction increases the surface area, enhancing functional properties. Ultrasonication reduced the enthalpy of millet flours by disrupting amorphous regions. Concurrently, processing altered surface topography, modified functional groups, and changed crystal structure. Also, the antinutritional factors (phytates and tannins) were reduced linearly on an increase in the time period of ultrasonication. This study shows that ultrasonication improves the functional properties of finger millet and barnyard millet flours.
- 6 January 2025
- Published by Wiley in Journal of Food Processing and Preservation
- Vol. 2025 (1)
Open AccessUltrasonication‐Induced Modification of Finger Millet and Barnyard Millet Flours: Phytoconstituents and Antioxidant Capacity, Functional Properties, and Microstructural Arrangement
The current study is aimed at studying the effect of ultrasonication on finger millet and barnyard millet flours which were processed for 10, 15, and 20 min at a constant amplitude of 30% and 30 kHz frequency at a maximum power of 750 W and 220 V. Ultrasonication resulted in modification of functional, structural, color, thermal, and molecular interactions and bioactive properties of millet flours. Ultrasonication resulted in decrement of water absorption capacity (1.51–1.36 and 1.51–1.05 g/g), swelling power (7.68–5.34 and 5.87–4.50 g/g), and foaming stability, while an increment was observed in water solubility index (3.59–8.41% and 3.03–10.94%), oil absorption capacity (1.98–2.16 g/g and 1.93–2.07 g/g), foaming capacity (12.00–17.00% and 18.00–25.00%), and paste clarity (51.20–61.00%T and 58.50–63.60%T) in finger millet and barnyard flours. An increase in bioactive components was observed till 15 min was observed, followed by reduction on further treatment. Ultrasonication triggers cavitation, which causes cell wall fractures and subsequent breakdown, ultimately reducing particle size. The resulting particle size reduction increases the surface area, enhancing functional properties. Ultrasonication reduced the enthalpy of millet flours by disrupting amorphous regions. Concurrently, processing altered surface topography, modified functional groups, and changed crystal structure. Also, the antinutritional factors (phytates and tannins) were reduced linearly on an increase in the time period of ultrasonication. This study shows that ultrasonication improves the functional properties of finger millet and barnyard millet flours.
- Open Access
The Effects of Preharvest Silicon Treatment and Passive MAP on Quality and Shelf Life of White Button Mushrooms in Thermoformed Recycled PET Packaging System
A crop pretreatment with silicon was combined with passive modified atmosphere packaging (PMAP) in a thermoformed recycled PET packaging format as a novel approach to minimize the quality degradation in mushrooms. This study was aimed to evaluate the effects of (a) two preharvest treatments, namely preharvest control (PHTC) and preharvest silicon treatment (PHTS) and (b) four packaging lid formats, namely PMAP1: a single hole of 1.1 mm size, PMAP2: two holes of 0.53 mm size, PMAP3: three holes of 0.53 mm size, and PMAPC: OMNI-PW micro perforated cling film as a control on the quality and shelf life of mushrooms during five days of storage at 4 °C and 99.9% RH. The results of the analysis of variance showed that packaging type, storage days, and the double interaction effects of storage days × packaging type had significant effects (p < 0.0001) on the changes in O2, CO2, colour L* and a* values, ΔE, total soluble solids (TSS), and the density of mushrooms. Density, electrolyte leakage (EL), and TSS were significantly affected by the double interaction effects of preharvest treatment × packaging type. Overall, PMAP1, PMAP2, and PMAP3 resulted in lower O2 + higher CO2 within packages compared with the conventional control. A preharvest silicon treatment had little overall effect. PMAP 1, 2 and 3 had a significantly lower ΔE (=better quality) after 5 days storage compared to PMAPC which had the highest ΔE (lowest quality) overall. PMAP1 and PMAP2 had the lowest EL values compared to PMAP3 and PMAPC. PMAP1, PMAP2, and PMAP3 all gave better TSS levels and density compared to PMAPC. Notably, this study proved that a perforation-mediated MAP design for mushrooms packaged in a thermoformed recycled PET packaging format maintained improved CO2, lowered O2, and reduced EL while maintaining TSS and the density of the mushrooms during the storage period.
Open AccessThe Effects of Preharvest Silicon Treatment and Passive MAP on Quality and Shelf Life of White Button Mushrooms in Thermoformed Recycled PET Packaging System
A crop pretreatment with silicon was combined with passive modified atmosphere packaging (PMAP) in a thermoformed recycled PET packaging format as a novel approach to minimize the quality degradation in mushrooms. This study was aimed to evaluate the effects of (a) two preharvest treatments, namely preharvest control (PHTC) and preharvest silicon treatment (PHTS) and (b) four packaging lid formats, namely PMAP1: a single hole of 1.1 mm size, PMAP2: two holes of 0.53 mm size, PMAP3: three holes of 0.53 mm size, and PMAPC: OMNI-PW micro perforated cling film as a control on the quality and shelf life of mushrooms during five days of storage at 4 °C and 99.9% RH. The results of the analysis of variance showed that packaging type, storage days, and the double interaction effects of storage days × packaging type had significant effects (p < 0.0001) on the changes in O2, CO2, colour L* and a* values, ΔE, total soluble solids (TSS), and the density of mushrooms. Density, electrolyte leakage (EL), and TSS were significantly affected by the double interaction effects of preharvest treatment × packaging type. Overall, PMAP1, PMAP2, and PMAP3 resulted in lower O2 + higher CO2 within packages compared with the conventional control. A preharvest silicon treatment had little overall effect. PMAP 1, 2 and 3 had a significantly lower ΔE (=better quality) after 5 days storage compared to PMAPC which had the highest ΔE (lowest quality) overall. PMAP1 and PMAP2 had the lowest EL values compared to PMAP3 and PMAPC. PMAP1, PMAP2, and PMAP3 all gave better TSS levels and density compared to PMAPC. Notably, this study proved that a perforation-mediated MAP design for mushrooms packaged in a thermoformed recycled PET packaging format maintained improved CO2, lowered O2, and reduced EL while maintaining TSS and the density of the mushrooms during the storage period.