Rodolfo Villamizar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Rodolfo Villamizar has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Luis Eduardo Mujica
Control, Data and Artificial Intelligence—CoDAlab, Escola d’Enginyeria de Barcelona Est, Universitat Politecnica de Catalunya, Barcelona, Spain
7 shared publications - Magda Ruiz
Departament de Matemàtiques, CoDAlab, Escola d’Enginyeria de Barcelona Est (EEBE), Universitat Politècnica de Catalunya, Campus Diagonal-Besòs. C, Eduard Maristany, 6-12, St. Adrià de Besòs, 08930 Barcelona, Spain
6 shared publications - Jabid Quiroga
Universidad Industrial de Santander, Bucaramanga, Colombia
4 shared publications - Josep Vehi
Modeling and Intelligent Control Engineering Laboratory, Institute of Informatics and Applications, University of Girona, Girona, Spain
4 shared publications Ningsu Luo
Department of Electronics, Computer Science and Automation, Universitat de Girona, 17071, Spain
4 shared publications- Shirley J. Dyke
Lyles School of Civil and Construction Engineering, Purdue University, 585 Purdue Mall, West Lafayette, IN 47907-2088, USA
3 shared publications
Latest Publications
- Open Access
- 26 January 2023
- Published by International University of Sarajevo in Periodicals of Engineering and Natural Sciences (PEN)
- Vol. 11 (1) , 64-73
Relationship between force signal and superficial electromyographic signals associated to hand movements
Relationship between force signal and superficial electromyographic signals associated to hand movements
- 26 January 2023
- Published by International University of Sarajevo in Periodicals of Engineering and Natural Sciences (PEN)
- Vol. 11 (1) , 64-73
Open AccessRelationship between force signal and superficial electromyographic signals associated to hand movements
Relationship between force signal and superficial electromyographic signals associated to hand movements
- Open Access
Implementation of a Piezo-diagnostics Approach for Damage Detection Based on PCA in a Linux-Based Embedded Platform
The implementation of damage-detection methods for continuously assessing structural integrity entails systems with attractive features such as storage capabilities, memory capacity, computational complexity and time-consuming processing. In this sense, embedded hardware platforms are a promising technology for developing integrated solutions in Structural Health Monitoring. In this paper, design, test, and specifications for a standalone inspection prototype are presented, which take advantage of piezo-diagnostics principle, statistical processing via Principal Component Analysis (PCA) and embedded systems. The equipment corresponds to a piezoelectric active system with the capability to detect defects in structures, by using a PCA-based algorithm embedded in the Odroid-U3 ARM Linux platform. The operation of the equipment consists of applying, at one side of the structure, wide guided waves by means of piezoelectric devices operated in actuation mode and to record the wave response in another side of the structure by using the same kind of piezoelectric devices operated in sensor mode. Based on the nominal response of the guide wave (no damages), represented by means of a PCA statistical model, the system can detect damages between the actuated/sensed points through squared prediction error (Q-statistical index). The system performance was evaluated in a pipe test bench where two kinds of damages were studied: first, a mass is added to the pipe surface, and then leaks are provoked to the pipe structure by means of a drill tool. The experiments were conducted on two lab structures: (i) a meter carbon-steel pipe section and (ii) a pipe loop structure. The wave response was recorded between the instrumented points for two conditions: (i) The pipe in nominal conditions, where several repetitions will be applied to build the nominal statistical model and (ii) when damage is caused to the pipe (mass adding or leak). Damage conditions were graphically recognized through the Q-statistic chart. Thus, the feasibility to implement an automated real-time diagnostic system is demonstrated with minimum processing resources and hardware flexibility.
Open AccessImplementation of a Piezo-diagnostics Approach for Damage Detection Based on PCA in a Linux-Based Embedded Platform
The implementation of damage-detection methods for continuously assessing structural integrity entails systems with attractive features such as storage capabilities, memory capacity, computational complexity and time-consuming processing. In this sense, embedded hardware platforms are a promising technology for developing integrated solutions in Structural Health Monitoring. In this paper, design, test, and specifications for a standalone inspection prototype are presented, which take advantage of piezo-diagnostics principle, statistical processing via Principal Component Analysis (PCA) and embedded systems. The equipment corresponds to a piezoelectric active system with the capability to detect defects in structures, by using a PCA-based algorithm embedded in the Odroid-U3 ARM Linux platform. The operation of the equipment consists of applying, at one side of the structure, wide guided waves by means of piezoelectric devices operated in actuation mode and to record the wave response in another side of the structure by using the same kind of piezoelectric devices operated in sensor mode. Based on the nominal response of the guide wave (no damages), represented by means of a PCA statistical model, the system can detect damages between the actuated/sensed points through squared prediction error (Q-statistical index). The system performance was evaluated in a pipe test bench where two kinds of damages were studied: first, a mass is added to the pipe surface, and then leaks are provoked to the pipe structure by means of a drill tool. The experiments were conducted on two lab structures: (i) a meter carbon-steel pipe section and (ii) a pipe loop structure. The wave response was recorded between the instrumented points for two conditions: (i) The pipe in nominal conditions, where several repetitions will be applied to build the nominal statistical model and (ii) when damage is caused to the pipe (mass adding or leak). Damage conditions were graphically recognized through the Q-statistic chart. Thus, the feasibility to implement an automated real-time diagnostic system is demonstrated with minimum processing resources and hardware flexibility.
- Open Access
Features of Cross-Correlation Analysis in a Data-Driven Approach for Structural Damage Assessment
This work discusses the advantage of using cross-correlation analysis in a data-driven approach based on principal component analysis (PCA) and piezodiagnostics to obtain successful diagnosis of events in structural health monitoring (SHM). In this sense, the identification of noisy data and outliers, as well as the management of data cleansing stages can be facilitated through the implementation of a preprocessing stage based on cross-correlation functions. Additionally, this work evidences an improvement in damage detection when the cross-correlation is included as part of the whole damage assessment approach. The proposed methodology is validated by processing data measurements from piezoelectric devices (PZT), which are used in a piezodiagnostics approach based on PCA and baseline modeling. Thus, the influence of cross-correlation analysis used in the preprocessing stage is evaluated for damage detection by means of statistical plots and self-organizing maps. Three laboratory specimens were used as test structures in order to demonstrate the validity of the methodology: (i) a carbon steel pipe section with leak and mass damage types, (ii) an aircraft wing specimen, and (iii) a blade of a commercial aircraft turbine, where damages are specified as mass-added. As the main concluding remark, the suitability of cross-correlation features combined with a PCA-based piezodiagnostic approach in order to achieve a more robust damage assessment algorithm is verified for SHM tasks.
Open AccessFeatures of Cross-Correlation Analysis in a Data-Driven Approach for Structural Damage Assessment
This work discusses the advantage of using cross-correlation analysis in a data-driven approach based on principal component analysis (PCA) and piezodiagnostics to obtain successful diagnosis of events in structural health monitoring (SHM). In this sense, the identification of noisy data and outliers, as well as the management of data cleansing stages can be facilitated through the implementation of a preprocessing stage based on cross-correlation functions. Additionally, this work evidences an improvement in damage detection when the cross-correlation is included as part of the whole damage assessment approach. The proposed methodology is validated by processing data measurements from piezoelectric devices (PZT), which are used in a piezodiagnostics approach based on PCA and baseline modeling. Thus, the influence of cross-correlation analysis used in the preprocessing stage is evaluated for damage detection by means of statistical plots and self-organizing maps. Three laboratory specimens were used as test structures in order to demonstrate the validity of the methodology: (i) a carbon steel pipe section with leak and mass damage types, (ii) an aircraft wing specimen, and (iii) a blade of a commercial aircraft turbine, where damages are specified as mass-added. As the main concluding remark, the suitability of cross-correlation features combined with a PCA-based piezodiagnostic approach in order to achieve a more robust damage assessment algorithm is verified for SHM tasks.
- Open Access
Support Stiffness Monitoring of Cylindrical Structures Using Magnetostrictive Transducers and the Torsional Mode T(0,1)
In this paper, a support stiffness monitoring scheme based on torsional guided waves for detecting loss of rigidity in a support of cylindrical structures is presented. Poor support performance in cylindrical specimens such as a pipeline setup located in a sloping terrain may produce a risky operation condition in terms of the installation integrity and the possibility of human casualties. The effects of changing the contact forces between support and the waveguide have been investigated by considering variations in the load between them. Fundamental torsional mode is produced and launched by a magnetostrictive collar in a pitch-catch configuration to study the support effect in the wavepacket propagation. Several scenarios are studied by emulating an abnormal condition in the support of a dedicated test bench. Numerical results revealed ultrasonic energy leakage in the form of bulk waves when a mechanical coupling between the cylindrical waveguide and support is yielded. Experimental results showed that the rate of ultrasonic energy leakage depends on the magnitude of the reaction forces between pipe and support; so different levels of attenuation of mode will be produced with different mechanical contact conditions. Thus, it is possible to relate a measured attenuation to variations in the supports condition. Results of each scenarios are presented and discussed demonstrating the feasibility and potential of tracking of the amplitude of the as an indicator of abnormal conditions in simple supports.Open AccessSupport Stiffness Monitoring of Cylindrical Structures Using Magnetostrictive Transducers and the Torsional Mode T(0,1)
In this paper, a support stiffness monitoring scheme based on torsional guided waves for detecting loss of rigidity in a support of cylindrical structures is presented. Poor support performance in cylindrical specimens such as a pipeline setup located in a sloping terrain may produce a risky operation condition in terms of the installation integrity and the possibility of human casualties. The effects of changing the contact forces between support and the waveguide have been investigated by considering variations in the load between them. Fundamental torsional mode is produced and launched by a magnetostrictive collar in a pitch-catch configuration to study the support effect in the wavepacket propagation. Several scenarios are studied by emulating an abnormal condition in the support of a dedicated test bench. Numerical results revealed ultrasonic energy leakage in the form of bulk waves when a mechanical coupling between the cylindrical waveguide and support is yielded. Experimental results showed that the rate of ultrasonic energy leakage depends on the magnitude of the reaction forces between pipe and support; so different levels of attenuation of mode will be produced with different mechanical contact conditions. Thus, it is possible to relate a measured attenuation to variations in the supports condition. Results of each scenarios are presented and discussed demonstrating the feasibility and potential of tracking of the amplitude of the as an indicator of abnormal conditions in simple supports. - Open Access
PCA Based Stress Monitoring of Cylindrical Specimens Using PZTs and Guided Waves
Since mechanical stress in structures affects issues such as strength, expected operational life and dimensional stability, a continuous stress monitoring scheme is necessary for a complete integrity assessment. Consequently, this paper proposes a stress monitoring scheme for cylindrical specimens, which are widely used in structures such as pipelines, wind turbines or bridges. The approach consists of tracking guided wave variations due to load changes, by comparing wave statistical patterns via Principal Component Analysis (PCA). Each load scenario is projected to the PCA space by means of a baseline model and represented using the Q-statistical indices. Experimental validation of the proposed methodology is conducted on two specimens: (i) a 12.7 mm ( ) diameter, 0.4 m length, AISI 1020 steel rod, and (ii) a 25.4 mm ( ) diameter, 6m length, schedule 40, A-106, hollow cylinder. Specimen 1 was subjected to axial loads, meanwhile specimen 2 to flexion. In both cases, simultaneous longitudinal and flexural guided waves were generated via piezoelectric devices (PZTs) in a pitch-catch configuration. Experimental results show the feasibility of the approach and its potential use as in-situ continuous stress monitoring application.Open AccessPCA Based Stress Monitoring of Cylindrical Specimens Using PZTs and Guided Waves
Since mechanical stress in structures affects issues such as strength, expected operational life and dimensional stability, a continuous stress monitoring scheme is necessary for a complete integrity assessment. Consequently, this paper proposes a stress monitoring scheme for cylindrical specimens, which are widely used in structures such as pipelines, wind turbines or bridges. The approach consists of tracking guided wave variations due to load changes, by comparing wave statistical patterns via Principal Component Analysis (PCA). Each load scenario is projected to the PCA space by means of a baseline model and represented using the Q-statistical indices. Experimental validation of the proposed methodology is conducted on two specimens: (i) a 12.7 mm ( ) diameter, 0.4 m length, AISI 1020 steel rod, and (ii) a 25.4 mm ( ) diameter, 6m length, schedule 40, A-106, hollow cylinder. Specimen 1 was subjected to axial loads, meanwhile specimen 2 to flexion. In both cases, simultaneous longitudinal and flexural guided waves were generated via piezoelectric devices (PZTs) in a pitch-catch configuration. Experimental results show the feasibility of the approach and its potential use as in-situ continuous stress monitoring application. - Open Access
- 1 May 2017
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 842 (1) , 012017
Damages detection in cylindrical metallic specimens by means of statistical baseline models and updated daily temperature profiles
In previous works, damage detection of metallic specimens exposed to temperature changes has been achieved by using a statistical baseline model based on Principal Component Analysis (PCA), piezodiagnostics principle and taking into account temperature effect by augmenting the baseline model or by using several baseline models according to the current temperature. In this paper a new approach is presented, where damage detection is based in a new index that combine Q and T2 statistical indices with current temperature measurements. Experimental tests were achieved in a carbon-steel pipe of 1m length and 1.5 inches diameter, instrumented with piezodevices acting as actuators or sensors. A PCA baseline model was obtained to a temperature of 21º and then T2 and Q statistical indices were obtained for a 24h temperature profile. Also, mass adding at different points of pipe between sensor and actuator was used as damage. By using the combined index the temperature contribution can be separated and a better differentiation of damages respect to undamaged cases can be graphically obtained.
- 1 May 2017
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 842 (1) , 012017
Open AccessDamages detection in cylindrical metallic specimens by means of statistical baseline models and updated daily temperature profiles
In previous works, damage detection of metallic specimens exposed to temperature changes has been achieved by using a statistical baseline model based on Principal Component Analysis (PCA), piezodiagnostics principle and taking into account temperature effect by augmenting the baseline model or by using several baseline models according to the current temperature. In this paper a new approach is presented, where damage detection is based in a new index that combine Q and T2 statistical indices with current temperature measurements. Experimental tests were achieved in a carbon-steel pipe of 1m length and 1.5 inches diameter, instrumented with piezodevices acting as actuators or sensors. A PCA baseline model was obtained to a temperature of 21º and then T2 and Q statistical indices were obtained for a 24h temperature profile. Also, mass adding at different points of pipe between sensor and actuator was used as damage. By using the combined index the temperature contribution can be separated and a better differentiation of damages respect to undamaged cases can be graphically obtained.
- Open Access
- 1 May 2017
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 842 (1) , 012018
Structural damage continuous monitoring by using a data driven approach based on principal component analysis and cross-correlation analysis
Continuous monitoring for damage detection in structural assessment comprises implementation of low cost equipment and efficient algorithms. This work describes the stages involved in the design of a methodology with high feasibility to be used in continuous damage assessment. Specifically, an algorithm based on a data-driven approach by using principal component analysis and pre-processing acquired signals by means of cross-correlation functions, is discussed. A carbon steel pipe section and a laboratory tower were used as test structures in order to demonstrate the feasibility of the methodology to detect abrupt changes in the structural response when damages occur. Two types of damage cases are studied: crack and leak for each structure, respectively. Experimental results show that the methodology is promising in the continuous monitoring of real structures.
- 1 May 2017
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 842 (1) , 012018
Open AccessStructural damage continuous monitoring by using a data driven approach based on principal component analysis and cross-correlation analysis
Continuous monitoring for damage detection in structural assessment comprises implementation of low cost equipment and efficient algorithms. This work describes the stages involved in the design of a methodology with high feasibility to be used in continuous damage assessment. Specifically, an algorithm based on a data-driven approach by using principal component analysis and pre-processing acquired signals by means of cross-correlation functions, is discussed. A carbon steel pipe section and a laboratory tower were used as test structures in order to demonstrate the feasibility of the methodology to detect abrupt changes in the structural response when damages occur. Two types of damage cases are studied: crack and leak for each structure, respectively. Experimental results show that the methodology is promising in the continuous monitoring of real structures.
- Open Access
- 1 May 2017
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 842 (1) , 012019
Ensemble learning as approach for pipeline condition assessment
The algorithms commonly used for damage condition monitoring present several drawbacks related to unbalanced data, optimal training requirements, low capability to manage feature diversity and low tolerance to errors. In this work, an approach based on ensemble learning is discussed as alternative to obtain more efficient diagnosis. The main advantage of ensemble learning is the use of several algorithms at the same time for a better proficiency. Thereby, combining simplest tree decision algorithms in bagging scheme, the accuracy of damage detection is improved. It takes advantage by combining prediction of preliminary algorithms based on regression models. The methodology is experimentally validated on a carbon steel pipe section, where mass adding conditions are studied as possible failures. Data from an active system based on piezoelectric sensors are stored and characterized through the T2 and Q statistical indexes. Then, they are the inputs to the ensemble learning. The proposed methodology allows determining the condition assessment and damage localizations in the structure. The results of the studied cases show the feasibility of ensemble learning for detecting occurrence of structural damages with successful results.
- 1 May 2017
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 842 (1) , 012019
Open AccessEnsemble learning as approach for pipeline condition assessment
The algorithms commonly used for damage condition monitoring present several drawbacks related to unbalanced data, optimal training requirements, low capability to manage feature diversity and low tolerance to errors. In this work, an approach based on ensemble learning is discussed as alternative to obtain more efficient diagnosis. The main advantage of ensemble learning is the use of several algorithms at the same time for a better proficiency. Thereby, combining simplest tree decision algorithms in bagging scheme, the accuracy of damage detection is improved. It takes advantage by combining prediction of preliminary algorithms based on regression models. The methodology is experimentally validated on a carbon steel pipe section, where mass adding conditions are studied as possible failures. Data from an active system based on piezoelectric sensors are stored and characterized through the T2 and Q statistical indexes. Then, they are the inputs to the ensemble learning. The proposed methodology allows determining the condition assessment and damage localizations in the structure. The results of the studied cases show the feasibility of ensemble learning for detecting occurrence of structural damages with successful results.
- 1 February 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
A robust to PVT variations low-voltage low-power current mirror
In this paper the design of a very low-voltage current mirror with an enhanced output resistance is presented. The mirror is designed using transistors in weak-inversion region, which allows operating with reduced supply voltage. With the use of multiple feedback loops, parameters such as minimum output voltage and output resistance are kept constant with respect to supply voltage, temperature and fabrication process variations (PVT variations). The mirror is biased at 0.5 V and is designed in a standard 0.18 μm technology. As a result, the circuit needs only 60 mV and 80 mV to saturate for NMOS and PMOS implementations respectively, with a maximum variation of 10 mV for all process corners and temperatures between -40 °C and 120 °C, and supply voltages between 0.45 V and 0.55 V. Finally, the mirror was used in a one-stage fully-differential OTA, for which a gain of 75 dB was achieved.
- 1 February 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
A robust to PVT variations low-voltage low-power current mirror
In this paper the design of a very low-voltage current mirror with an enhanced output resistance is presented. The mirror is designed using transistors in weak-inversion region, which allows operating with reduced supply voltage. With the use of multiple feedback loops, parameters such as minimum output voltage and output resistance are kept constant with respect to supply voltage, temperature and fabrication process variations (PVT variations). The mirror is biased at 0.5 V and is designed in a standard 0.18 μm technology. As a result, the circuit needs only 60 mV and 80 mV to saturate for NMOS and PMOS implementations respectively, with a maximum variation of 10 mV for all process corners and temperatures between -40 °C and 120 °C, and supply voltages between 0.45 V and 0.55 V. Finally, the mirror was used in a one-stage fully-differential OTA, for which a gain of 75 dB was achieved.
- 1 January 2014
- Published by Springer Nature
- p. 347-356
Automatic Sintonization of SOM Neural Network Using Evolutionary Algorithms: An Application in the SHM Problem
- 1 January 2014
- Published by Springer Nature
- p. 347-356
Automatic Sintonization of SOM Neural Network Using Evolutionary Algorithms: An Application in the SHM Problem