Ali Abdul-Aziz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Ali Abdul-Aziz has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
Joseph E. Grady
NASA Glenn Research Center, Cleveland, Ohio, USA
5 shared publicationsRamakrishna T. Bhatt
NASA Glenn Research Center, Cleveland, Ohio, USA
5 shared publications- Mark Woike
NASA Glenn Research Ctr. (United States)
4 shared publications Frank Abdi
AlphaSTAR Corporation, Long Beach, CA 90804, USA
3 shared publicationsMark R. Woike
NASA Glenn Research Ctr. (United States)
3 shared publicationsD. Zhu
NASA Glenn Research Ctr. (United States)
2 shared publications
Latest Publications
- 1 November 2022
- Published by The American Society for Nondestructive Testing, Inc. in Materials Evaluation
- Vol. 80 (11) , 26-30
Digital Image Correlation and Its Role in NDE
Advancements in nondestructive evaluation (NDE) have represented a continuous process of technology achievements moving toward easier approaches, a wider range of applications, and better results outcomes. Materials and component characterization is done in many instances using destructive testing, which is effective but time-consuming, costly, and difficult to obtain feedback during manufacturing. Today, new, efficient, and noninvasive materials characterization technologies are becoming standard in industry, offering cost-effective applicability and quality benefits. In addition, newer inventions, state-of-the-art methodologies and instrumentations in NDE, and characterization technologies are offering ample support to industry to advance work and operations.
- 1 November 2022
- Published by The American Society for Nondestructive Testing, Inc. in Materials Evaluation
- Vol. 80 (11) , 26-30
Digital Image Correlation and Its Role in NDE
Advancements in nondestructive evaluation (NDE) have represented a continuous process of technology achievements moving toward easier approaches, a wider range of applications, and better results outcomes. Materials and component characterization is done in many instances using destructive testing, which is effective but time-consuming, costly, and difficult to obtain feedback during manufacturing. Today, new, efficient, and noninvasive materials characterization technologies are becoming standard in industry, offering cost-effective applicability and quality benefits. In addition, newer inventions, state-of-the-art methodologies and instrumentations in NDE, and characterization technologies are offering ample support to industry to advance work and operations.
- 1 November 2022
- Published by The American Society for Nondestructive Testing, Inc. in Materials Evaluation
- Vol. 80 (11) , 62-67
Damage Monitoring of Ceramic Matrix Composites Under Tension Loading Via NDE-based DIC Approach
- 1 November 2022
- Published by The American Society for Nondestructive Testing, Inc. in Materials Evaluation
- Vol. 80 (11) , 62-67
Damage Monitoring of Ceramic Matrix Composites Under Tension Loading Via NDE-based DIC Approach
- 22 March 2021
- Published by SPIE-Intl Soc Optical Eng
- p. 25
Analytical and experimental verification of environmental barrier coating (EBC) covering crack propagation, failure mechanisms, and life modeling
SPIE Digital Library Proceedings
- 22 March 2021
- Published by SPIE-Intl Soc Optical Eng
- p. 25
Analytical and experimental verification of environmental barrier coating (EBC) covering crack propagation, failure mechanisms, and life modeling
SPIE Digital Library Proceedings
- 16 July 2019
- Published by ASME International in Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems
- Vol. 2 (3)
Robust Localization and Classification of Barely Visible Indentations in Composite Structures by Fusion of Ultrasonic Damage Indices
This study aims to detect, localize, and assess the severity of barely visible indentation damage in a composite sandwich structure using ultrasonic guided waves. A quasistatic loading was gradually applied on a specimen of carbon fiber reinforced epoxy resulting in dents on the surface. Lamb-wave measurements, from a sensor network mounted on the panel's surface, were taken for the intact condition and three damage cases (0.2, 0.5, and 2.7-mm dents). Three approaches were adopted to define the damage indices (DIs) toward anomaly detection, namely, amplitude variation, symbolic dynamics, and root mean square deviation. Data fusion was performed between measurements from multiple excitation frequencies for single and multiple DIs, where the anomaly combination between all the frequencies and the DIs was called a total anomaly. An imaging algorithm was implemented for damage localization in conjunction with single and combined DIs. It was shown that combining the effects of different frequencies and/or different DIs increases the robustness and consistency of the damage detection and localization process. Moreover, a distance-based classification technique was applied using features from single DIs and the combined anomaly measure. Accuracies higher than 91% were attained for the majority of the cases tested.
- 16 July 2019
- Published by ASME International in Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems
- Vol. 2 (3)
Robust Localization and Classification of Barely Visible Indentations in Composite Structures by Fusion of Ultrasonic Damage Indices
This study aims to detect, localize, and assess the severity of barely visible indentation damage in a composite sandwich structure using ultrasonic guided waves. A quasistatic loading was gradually applied on a specimen of carbon fiber reinforced epoxy resulting in dents on the surface. Lamb-wave measurements, from a sensor network mounted on the panel's surface, were taken for the intact condition and three damage cases (0.2, 0.5, and 2.7-mm dents). Three approaches were adopted to define the damage indices (DIs) toward anomaly detection, namely, amplitude variation, symbolic dynamics, and root mean square deviation. Data fusion was performed between measurements from multiple excitation frequencies for single and multiple DIs, where the anomaly combination between all the frequencies and the DIs was called a total anomaly. An imaging algorithm was implemented for damage localization in conjunction with single and combined DIs. It was shown that combining the effects of different frequencies and/or different DIs increases the robustness and consistency of the damage detection and localization process. Moreover, a distance-based classification technique was applied using features from single DIs and the combined anomaly measure. Accuracies higher than 91% were attained for the majority of the cases tested.
- 20 March 2019
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10973, 109730Q-25
Propulsion health monitoring assessed by microwave sensor performance and blade tip timing
Gas turbine engine makers are always striving to implement newer technologies to help monitor the engine health and performance. Among these technologies is the employment of highly specialized sensors within the engine compartment. The sensors are to screen response of components such as rotor disk blades which are subjects to complex loading conditions and that includes combined thermal and mechanical loads. Detecting unexpected or excessive blade Vibration before failure is critical to ensure safety and to achieve expected apparatus life. Traditional detection methods have relied solely on component inspection during service or on the use of gage telemetry systems as well as other means of non-destructive evaluation. These methods require time and cost and do not provided an accurate feedback of the health when the engine is in operation. At NASA Glenn Research Center, an effort is underway to develop and test validate microwave based blade tip timing sensors in support of the latter concerns and for the purpose of investigating their application for propulsion health monitoring under the Transformational Tools and Technologies Project. This process involves working with prototype sensors to determine their applicability and assess their ability in making blade tip clearance measurements along with further refining a methodology required to extract deflection measurements from the raw data acquired from the sensors. The efforts focus specifically on the use and implementation of microwave based tip-timing sensors that are intended to be used for non-contact stress measurement application. The work includes an experimental task to define the optimum set-up of these sensors, determine their sensitivity in making blade tip deflection measurements and validate their performance against realistic geometries in a spin rig. This also includes analytical calculations to compare to the experimental results. Data pertaining to the findings obtained from the testing as well as the supportive analytical results are presented and discussed.
- 20 March 2019
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10973, 109730Q-25
Propulsion health monitoring assessed by microwave sensor performance and blade tip timing
Gas turbine engine makers are always striving to implement newer technologies to help monitor the engine health and performance. Among these technologies is the employment of highly specialized sensors within the engine compartment. The sensors are to screen response of components such as rotor disk blades which are subjects to complex loading conditions and that includes combined thermal and mechanical loads. Detecting unexpected or excessive blade Vibration before failure is critical to ensure safety and to achieve expected apparatus life. Traditional detection methods have relied solely on component inspection during service or on the use of gage telemetry systems as well as other means of non-destructive evaluation. These methods require time and cost and do not provided an accurate feedback of the health when the engine is in operation. At NASA Glenn Research Center, an effort is underway to develop and test validate microwave based blade tip timing sensors in support of the latter concerns and for the purpose of investigating their application for propulsion health monitoring under the Transformational Tools and Technologies Project. This process involves working with prototype sensors to determine their applicability and assess their ability in making blade tip clearance measurements along with further refining a methodology required to extract deflection measurements from the raw data acquired from the sensors. The efforts focus specifically on the use and implementation of microwave based tip-timing sensors that are intended to be used for non-contact stress measurement application. The work includes an experimental task to define the optimum set-up of these sensors, determine their sensitivity in making blade tip deflection measurements and validate their performance against realistic geometries in a spin rig. This also includes analytical calculations to compare to the experimental results. Data pertaining to the findings obtained from the testing as well as the supportive analytical results are presented and discussed.
- Open Access
Durability Modeling Review of Thermal- and Environmental-Barrier-Coated Fiber-Reinforced Ceramic Matrix Composites Part I
This paper is a Part I of a literature review documentation describing the currently available and used techniques that are being explored by material scientists and researchers in the field of materials characterizations and testing for both thermal and environmental barrier coatings (TBCs and EBCs, respectively). This review contains relevant information regarding the most common coating applications and their impact on the durability and life of both the coatings and the substrate materials. It also includes a description of the methodologies of coating applications and their pros and cons. A discussion of the applicability, failure modes and modeling approaches that are presently available and utilized by active researchers in the field is also included. Part II will illustrate an in-depth assessment of various aspects of the available and developing life prediction models for both TBC and EBC and the influence of intrinsic and extrinsic factors on their thermal and mechanical stability.
Open AccessDurability Modeling Review of Thermal- and Environmental-Barrier-Coated Fiber-Reinforced Ceramic Matrix Composites Part I
This paper is a Part I of a literature review documentation describing the currently available and used techniques that are being explored by material scientists and researchers in the field of materials characterizations and testing for both thermal and environmental barrier coatings (TBCs and EBCs, respectively). This review contains relevant information regarding the most common coating applications and their impact on the durability and life of both the coatings and the substrate materials. It also includes a description of the methodologies of coating applications and their pros and cons. A discussion of the applicability, failure modes and modeling approaches that are presently available and utilized by active researchers in the field is also included. Part II will illustrate an in-depth assessment of various aspects of the available and developing life prediction models for both TBC and EBC and the influence of intrinsic and extrinsic factors on their thermal and mechanical stability.
- 19 April 2017
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10171, 101710
Data collection and analysis software development for rotor dynamics testing in spin laboratory
Gas turbine engine components undergo high rotational loading another complex environmental conditions. Such operating environment leads these components to experience damages and cracks that can cause catastrophic failure during flights. There are traditional crack detections and health monitoring methodologies currently being used which rely on periodic routine maintenances, nondestructive inspections that often times involve engine and components dis-assemblies. These methods do not also offer adequate information about the faults, especially, if these faults at subsurface or not clearly evident. At NASA Glenn research center, the rotor dynamics laboratory is presently involved in developing newer techniques that are highly dependent on sensor technology to enable health monitoring and prediction of damage and cracks in rotor disks. These approaches are noninvasive and relatively economical. Spin tests are performed using a subscale test article mimicking turbine rotor disk undergoing rotational load. Non-contact instruments such as capacitive and microwave sensors are used to measure the blade tip gap displacement and blade vibrations characteristics in an attempt develop a physics based model to assess/predict the faults in the rotor disk. Data collection is a major component in this experimental-analytical procedure and as a result, an upgrade to an older version of the data acquisition software which is based on LabVIEW program has been implemented to support efficiently running tests and analyze the results. Outcomes obtained from the tests data and related experimental and analytical rotor dynamics modeling including key features of the updated software are presented and discussed. © (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
- 19 April 2017
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10171, 101710
Data collection and analysis software development for rotor dynamics testing in spin laboratory
Gas turbine engine components undergo high rotational loading another complex environmental conditions. Such operating environment leads these components to experience damages and cracks that can cause catastrophic failure during flights. There are traditional crack detections and health monitoring methodologies currently being used which rely on periodic routine maintenances, nondestructive inspections that often times involve engine and components dis-assemblies. These methods do not also offer adequate information about the faults, especially, if these faults at subsurface or not clearly evident. At NASA Glenn research center, the rotor dynamics laboratory is presently involved in developing newer techniques that are highly dependent on sensor technology to enable health monitoring and prediction of damage and cracks in rotor disks. These approaches are noninvasive and relatively economical. Spin tests are performed using a subscale test article mimicking turbine rotor disk undergoing rotational load. Non-contact instruments such as capacitive and microwave sensors are used to measure the blade tip gap displacement and blade vibrations characteristics in an attempt develop a physics based model to assess/predict the faults in the rotor disk. Data collection is a major component in this experimental-analytical procedure and as a result, an upgrade to an older version of the data acquisition software which is based on LabVIEW program has been implemented to support efficiently running tests and analyze the results. Outcomes obtained from the tests data and related experimental and analytical rotor dynamics modeling including key features of the updated software are presented and discussed. © (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
- Open Access
Durability Analysis and Experimental Validation of Environmental Barrier Coating (EBC) Performance Using Combined Digital Image Correlation and NDE
To understand the failure mechanism or to predict the spallation life of environmental barrier coatings (EBC) on fiber reinforced ceramic matrix composites, the fracture strength of EBC and the process of the crack growth in EBC layers need to be experimentally determined under standard or simulated engine operating conditions. The current work considers a multi layered barium strontium aluminum silicate (BSAS)-based EBC-coated, melt infiltrated silicon carbide fiber reinforced silicon carbide matrix composite (MI SiC/SiC) specimen that was tensile tested at room temperature. Numerous tests were performed under tensile loading conditions, and the specimen was loaded until failure under pre-determined stress levels. The specimen was examined with optical microscopy, scanning electron microscopy (SEM), computed tomography (CT) scan, and digital image correlation (DIC) camera. Observation from the computed tomography scanning, the SEM, and the optical microscopy did not offer conclusive information concerning the cracks that spawned during the tests. However, inspection with the DIC camera offered some indication that cracks had developed and allowed their detection and the location of their initiation site. Thus, this study provides detailed discussion of the results obtained from the experimental investigation and the nondestructive evaluation (NDE), and it also includes assessment of the stress response predicted by analytical modeling and their impact on EBC durability and crack growth formation under complex loading settings.
Open AccessDurability Analysis and Experimental Validation of Environmental Barrier Coating (EBC) Performance Using Combined Digital Image Correlation and NDE
To understand the failure mechanism or to predict the spallation life of environmental barrier coatings (EBC) on fiber reinforced ceramic matrix composites, the fracture strength of EBC and the process of the crack growth in EBC layers need to be experimentally determined under standard or simulated engine operating conditions. The current work considers a multi layered barium strontium aluminum silicate (BSAS)-based EBC-coated, melt infiltrated silicon carbide fiber reinforced silicon carbide matrix composite (MI SiC/SiC) specimen that was tensile tested at room temperature. Numerous tests were performed under tensile loading conditions, and the specimen was loaded until failure under pre-determined stress levels. The specimen was examined with optical microscopy, scanning electron microscopy (SEM), computed tomography (CT) scan, and digital image correlation (DIC) camera. Observation from the computed tomography scanning, the SEM, and the optical microscopy did not offer conclusive information concerning the cracks that spawned during the tests. However, inspection with the DIC camera offered some indication that cracks had developed and allowed their detection and the location of their initiation site. Thus, this study provides detailed discussion of the results obtained from the experimental investigation and the nondestructive evaluation (NDE), and it also includes assessment of the stress response predicted by analytical modeling and their impact on EBC durability and crack growth formation under complex loading settings.
- 24 April 2015
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 22 (12) , 1039-1047
Criteria for Crack Deflection-Penetration in EBC Coated Ceramics: A Parametric Study
This article discusses results obtained from a parametric study to analytically evaluate the impingement of a crack at the interface of an environmental barrier coating (EBC) and a monolithic Silicon nitride (Si3N4) layered ceramics substrate. The study establishes a correlation that leads to determine if the crack is arrested or advanced by either penetrating or deflecting along the EBC/substrate interface. A finite-element-based fracture mechanics methodology is utilized to perform these calculations. Critical parameters determining penetration-deflection conditions in relation to EBC's physical characteristics, such as porosity level, voids, and mini cracks, are determined for a single layer and multi-layered coating system coordinating the interactions between the EBCs (Mullite, Mullite mixture, Silicon nitride, etc.) and the substrate structure. Results showing thermo-mechanical stresses and stress/strain energy release relations with respect to crack penetration-deflection are presented and discussed as the crack is advanced.
- 24 April 2015
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 22 (12) , 1039-1047
Criteria for Crack Deflection-Penetration in EBC Coated Ceramics: A Parametric Study
This article discusses results obtained from a parametric study to analytically evaluate the impingement of a crack at the interface of an environmental barrier coating (EBC) and a monolithic Silicon nitride (Si3N4) layered ceramics substrate. The study establishes a correlation that leads to determine if the crack is arrested or advanced by either penetrating or deflecting along the EBC/substrate interface. A finite-element-based fracture mechanics methodology is utilized to perform these calculations. Critical parameters determining penetration-deflection conditions in relation to EBC's physical characteristics, such as porosity level, voids, and mini cracks, are determined for a single layer and multi-layered coating system coordinating the interactions between the EBCs (Mullite, Mullite mixture, Silicon nitride, etc.) and the substrate structure. Results showing thermo-mechanical stresses and stress/strain energy release relations with respect to crack penetration-deflection are presented and discussed as the crack is advanced.
- 27 March 2015
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9436, 94360A-94360A-8
Engine rotor health monitoring: an experimental approach to fault detection and durability assessment
- 27 March 2015
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9436, 94360A-94360A-8
Engine rotor health monitoring: an experimental approach to fault detection and durability assessment