Hiroyuki Yoshida
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Hiroyuki Yoshida has a total of 360 co-authors. Here are the top co-authors by number of shared publications:
Naoki Sato
Institute for Chemical Research, Kyoto University, Gokasho, Uji, Kyoto 611-0011, Japan
20 shared publications- Jun’yA Tsutsumi
Core Electronics Technology Research Institute (CETRI), National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Ibaraki 305-8565, Japan
9 shared publications - Keisuke Tajima
RIKEN Center for Emergent Matter Science (CEMS), 2-1 Hirosawa, Wako, Saitama 351-0198, Japan
7 shared publications - Satoshi Kera
Institute for Molecular Science
7 shared publications - Itaru Osaka
Graduate School of Advanced Science and Engineering, Hiroshima University, 1-4-1 Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8527, Japan
6 shared publications - Kyohei Nakano
RIKEN Center for Emergent Matter Science (CEMS), 2-1 Hirosawa, Wako, Saitama 351-0198, Japan
6 shared publications
Latest Publications
- Open Access
- 29 October 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (45) , 15896-15906
Ionization Energies, Electron Affinities, Bandgaps, Exciton Binding Energies, and Polarization Energies of Orientation-Controlled Picene, [6]-Phenacene, and [7]-Phenacene Thin Films
Phenacenes, in which benzene rings are fused in a zigzag manner, are chemically robust π-conjugated hydrocarbons of interest for organic electronic applications and superconductivity. However, quantitative electronic parameters of phenacene thin films remain limited compared with those of acenes. Here, we determine the ionization energies (IEs), electron affinities (EAs), bandgaps, exciton binding energies, and polarization energies of orientation-controlled thin films of picene, [6]-phenacene, and [7]-phenacene using ultraviolet photoelectron spectroscopy and low-energy inverse photoelectron spectroscopy. The energy parameters depend only weakly on molecular size. In contrast, both IE and EA exhibit large orientation-dependent shifts of approximately 1 eV: lying films show IEs of 6.28–6.42 eV and EAs of 2.20–2.39 eV, whereas standing films show IEs of 5.54–5.74 eV and EAs of 1.46–1.73 eV. Nevertheless, the bandgaps of approximately 4 eV and exciton binding energies of approximately 1 eV remain nearly independent of molecular size and orientation. Analysis of polarization energies shows that the induction term is nearly orientation independent, whereas the electrostatic term strongly depends on orientation and originates primarily from molecular quadrupole moments. These results identify molecular orientation as a key factor governing frontier energy levels in phenacene thin films.
- 29 October 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (45) , 15896-15906
Open AccessIonization Energies, Electron Affinities, Bandgaps, Exciton Binding Energies, and Polarization Energies of Orientation-Controlled Picene, [6]-Phenacene, and [7]-Phenacene Thin Films
Phenacenes, in which benzene rings are fused in a zigzag manner, are chemically robust π-conjugated hydrocarbons of interest for organic electronic applications and superconductivity. However, quantitative electronic parameters of phenacene thin films remain limited compared with those of acenes. Here, we determine the ionization energies (IEs), electron affinities (EAs), bandgaps, exciton binding energies, and polarization energies of orientation-controlled thin films of picene, [6]-phenacene, and [7]-phenacene using ultraviolet photoelectron spectroscopy and low-energy inverse photoelectron spectroscopy. The energy parameters depend only weakly on molecular size. In contrast, both IE and EA exhibit large orientation-dependent shifts of approximately 1 eV: lying films show IEs of 6.28–6.42 eV and EAs of 2.20–2.39 eV, whereas standing films show IEs of 5.54–5.74 eV and EAs of 1.46–1.73 eV. Nevertheless, the bandgaps of approximately 4 eV and exciton binding energies of approximately 1 eV remain nearly independent of molecular size and orientation. Analysis of polarization energies shows that the induction term is nearly orientation independent, whereas the electrostatic term strongly depends on orientation and originates primarily from molecular quadrupole moments. These results identify molecular orientation as a key factor governing frontier energy levels in phenacene thin films.
- Open Access
- 17 September 2026
- Published by Wiley in Advanced Optical Materials
- Vol. 14 (37) , e71807
Spatial Control of Spontaneous Orientation Polarization for Efficient Charge Separation in Organic Photovoltaics
Spontaneous orientation polarization (SOP) offers a unique approach to generating internal electric fields in organic photovoltaics (OPVs). However, in conventional high‐performance OPVs based on bulk heterojunction architectures, the complex nanoscale morphology makes it difficult to isolate the intrinsic role of SOP in charge dynamics. Herein, a planar heterojunction model is constructed using an acceptor pair with nearly identical electron affinities and molecular backbones but markedly different SOP magnitudes, enabling the selective evaluation of SOP‐induced electrostatic effects. An ultrathin SOP layer inserted directly at the donor/acceptor interface efficiently promotes exciton dissociation, significantly improving the fill factor and power conversion efficiency. Conversely, displacement current measurements quantitatively reveal the adverse effects of SOP: increasing the thickness of the SOP layer generates a massive potential change within the SOP layer, triggering low‐voltage hole accumulation at the interface. This accumulation promotes exciton–polaron quenching (EPQ)‐like deactivation, resulting in voltage‐dependent photocurrent loss and reduced device performance. By decoupling this dual nature of SOP, this study demonstrates that spatial arrangement of SOP, in which an ultrathin polar layer is localized near the charge‐separation interface while suppressing excessive interfacial charge accumulation, is a general design principle for utilizing local electric fields in high‐performance OPVs.
- 17 September 2026
- Published by Wiley in Advanced Optical Materials
- Vol. 14 (37) , e71807
Open AccessSpatial Control of Spontaneous Orientation Polarization for Efficient Charge Separation in Organic Photovoltaics
Spontaneous orientation polarization (SOP) offers a unique approach to generating internal electric fields in organic photovoltaics (OPVs). However, in conventional high‐performance OPVs based on bulk heterojunction architectures, the complex nanoscale morphology makes it difficult to isolate the intrinsic role of SOP in charge dynamics. Herein, a planar heterojunction model is constructed using an acceptor pair with nearly identical electron affinities and molecular backbones but markedly different SOP magnitudes, enabling the selective evaluation of SOP‐induced electrostatic effects. An ultrathin SOP layer inserted directly at the donor/acceptor interface efficiently promotes exciton dissociation, significantly improving the fill factor and power conversion efficiency. Conversely, displacement current measurements quantitatively reveal the adverse effects of SOP: increasing the thickness of the SOP layer generates a massive potential change within the SOP layer, triggering low‐voltage hole accumulation at the interface. This accumulation promotes exciton–polaron quenching (EPQ)‐like deactivation, resulting in voltage‐dependent photocurrent loss and reduced device performance. By decoupling this dual nature of SOP, this study demonstrates that spatial arrangement of SOP, in which an ultrathin polar layer is localized near the charge‐separation interface while suppressing excessive interfacial charge accumulation, is a general design principle for utilizing local electric fields in high‐performance OPVs.
- Open Access
- 14 March 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (27) , 17569-17584
A universal model for energy level alignment at interfaces of hole-collecting monolayers in p-i-n perovskite solar cells
A universal model is developed, which describes the energy level alignment at the interfaces of hole-collecting monolayers and perovskite layers.
- 14 March 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (27) , 17569-17584
Open AccessA universal model for energy level alignment at interfaces of hole-collecting monolayers in p-i-n perovskite solar cells
A universal model is developed, which describes the energy level alignment at the interfaces of hole-collecting monolayers and perovskite layers.
- 1 February 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (2)
Peak separation methods for inverse photoelectron spectra: Comparing second derivative, curve fitting, and deconvolution analyses
Inverse photoelectron spectroscopy (IPES) is a powerful technique for probing the unoccupied electronic states of materials. It can be regarded as the inversion process of photoelectron spectroscopy (PES), which examines the occupied states. Recently developed low-energy inverse photoelectron spectroscopy (LEIPS) can significantly advance the study of unoccupied states, owing to minimal sample damage and suppressed dark counts compared to conventional IPES. However, the instrumental resolution remains at 0.2 eV, which is one order of magnitude lower than that of PES. Spectral broadening caused by the low instrumental resolution often results in overlapping peaks. Therefore, peak separation is crucial in the analysis of LEIPS spectra. In this study, we compared three peak separation methods—second derivative, curve fitting, and deconvolution. These methods were applied to modeled and experimental LEIPS spectra of the lowest unoccupied molecular orbital-derived band of pentacene, which consists of two splitting peaks due to the two inequivalent molecules in the unit cell. We systematically and quantitatively evaluated the performance of each method in terms of analysis parameters and discussed its robustness to noise as well as its peak separation capabilities as a function of peak energy spacing and intensity ratio. This work offers a practical framework for peak separation in LEIPS, with extensions to PES and a wide range of spectroscopies.
- 1 February 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (2)
Peak separation methods for inverse photoelectron spectra: Comparing second derivative, curve fitting, and deconvolution analyses
Inverse photoelectron spectroscopy (IPES) is a powerful technique for probing the unoccupied electronic states of materials. It can be regarded as the inversion process of photoelectron spectroscopy (PES), which examines the occupied states. Recently developed low-energy inverse photoelectron spectroscopy (LEIPS) can significantly advance the study of unoccupied states, owing to minimal sample damage and suppressed dark counts compared to conventional IPES. However, the instrumental resolution remains at 0.2 eV, which is one order of magnitude lower than that of PES. Spectral broadening caused by the low instrumental resolution often results in overlapping peaks. Therefore, peak separation is crucial in the analysis of LEIPS spectra. In this study, we compared three peak separation methods—second derivative, curve fitting, and deconvolution. These methods were applied to modeled and experimental LEIPS spectra of the lowest unoccupied molecular orbital-derived band of pentacene, which consists of two splitting peaks due to the two inequivalent molecules in the unit cell. We systematically and quantitatively evaluated the performance of each method in terms of analysis parameters and discussed its robustness to noise as well as its peak separation capabilities as a function of peak energy spacing and intensity ratio. This work offers a practical framework for peak separation in LEIPS, with extensions to PES and a wide range of spectroscopies.
- Open Access
- 7 January 2026
- Published by Elsevier in Journal of Electron Spectroscopy and Related Phenomena
- Vol. 284
Automated determination of ionization energy and electron affinity from UPS and LEIPS spectra based on piecewise polynomial fitting
- 7 January 2026
- Published by Elsevier in Journal of Electron Spectroscopy and Related Phenomena
- Vol. 284
Open AccessAutomated determination of ionization energy and electron affinity from UPS and LEIPS spectra based on piecewise polynomial fitting
- Open Access
- 29 December 2025
- Published by Elsevier in Journal of Electron Spectroscopy and Related Phenomena
- Vol. 284
Automated analysis of low-energy inverse photoelectron spectra using machine learning
- 29 December 2025
- Published by Elsevier in Journal of Electron Spectroscopy and Related Phenomena
- Vol. 284
Open AccessAutomated analysis of low-energy inverse photoelectron spectra using machine learning
- Open Access
- 4 December 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 112 (22)
Electron affinity and binding energy of excitons in disordered organic semiconductors. II. First-principles simulations and inverse photoemission studies for MADN
Key quantities for designing new opto-electronic devices that are based on disordered organic semiconductors, such as organic light-emitting diodes (OLEDs), are the frontier orbital energies, exciton energies, and exciton binding energies. Obtaining these quantities spectroscopically with a high accuracy is complicated by the nonadiabaticity of such experiments. Here, we present, for two isomers of the blue-emitting prototypical OLED material 2-methyl-9,10-bis(naphthalen-2-yl)anthracene (MADN), multiscale first-principles simulations of optical absorption spectra and of the electron affinity E A , a theoretical prediction and analysis of low-energy inverse photoemission spectroscopy (LEIPS) spectra that probe E A , and experimental LEIPS spectra. The simulations combine many-body Green's function theory, polarizable film embedding, and multimode electron-vibrational coupling. We show how the onset energy of LEIPS spectra, which is commonly used to estimate E A , can differ from the actual adiabatic value, depending on material parameters and the instrumental resolution. For the two isomers of MADN, the theoretical and experimental onset energies differ by about 0.20–0.25 eV, which is within the expected uncertainty margin. However, the experimental spectra are almost featureless, whereas the theoretical spectra show a clear peak structure. An extensive study is presented of the possible effects of thin-film charging on the spectra, including charging of deep trap states. The calculated optical absorption spectra agree excellently with experiment, with a peak energy difference of only about 0.05 eV. For the two isomers of MADN, the calculated adiabatic singlet exciton binding energies are 1.0–1.1 eV.
- 4 December 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 112 (22)
Open AccessElectron affinity and binding energy of excitons in disordered organic semiconductors. II. First-principles simulations and inverse photoemission studies for MADN
Key quantities for designing new opto-electronic devices that are based on disordered organic semiconductors, such as organic light-emitting diodes (OLEDs), are the frontier orbital energies, exciton energies, and exciton binding energies. Obtaining these quantities spectroscopically with a high accuracy is complicated by the nonadiabaticity of such experiments. Here, we present, for two isomers of the blue-emitting prototypical OLED material 2-methyl-9,10-bis(naphthalen-2-yl)anthracene (MADN), multiscale first-principles simulations of optical absorption spectra and of the electron affinity E A , a theoretical prediction and analysis of low-energy inverse photoemission spectroscopy (LEIPS) spectra that probe E A , and experimental LEIPS spectra. The simulations combine many-body Green's function theory, polarizable film embedding, and multimode electron-vibrational coupling. We show how the onset energy of LEIPS spectra, which is commonly used to estimate E A , can differ from the actual adiabatic value, depending on material parameters and the instrumental resolution. For the two isomers of MADN, the theoretical and experimental onset energies differ by about 0.20–0.25 eV, which is within the expected uncertainty margin. However, the experimental spectra are almost featureless, whereas the theoretical spectra show a clear peak structure. An extensive study is presented of the possible effects of thin-film charging on the spectra, including charging of deep trap states. The calculated optical absorption spectra agree excellently with experiment, with a peak energy difference of only about 0.05 eV. For the two isomers of MADN, the calculated adiabatic singlet exciton binding energies are 1.0–1.1 eV.
- Open Access
Peak separation methods for inverse photoelectron spectra: Comparing second derivative, curve fitting, and deconvolution analyses
Inverse photoelectron spectroscopy (IPES) is a powerful technique for probing the unoccupied electronic states of materials. It can be regarded as the inversion process of photoelectron spectroscopy (PES), which examines the occupied states. Recently developed low-energy inverse photoelectron spectroscopy (LEIPS) can significantly advance the study of unoccupied states, owing to an improved signal-to-noise ratio and minimal sample damage compared to conventional IPES. However, the instrumental resolution remains at 0.2 eV, which is one order of magnitude lower than that of PES. Spectral broadening caused by the low instrumental resolution often results in overlapping peaks. Peak separation is therefore crucial in the analysis of LEIPS spectra. In this study, we compared three peak separation methods: second derivative, curve fitting, and deconvolution. These methods were applied to modeled and experimental LEIPS spectra of the lowest unoccupied molecular orbital-derived band of pentacene, which consists of two splitting peaks due to the two inequivalent molecules in the unit cell. We systematically and quantitatively evaluated the performance of each method in terms of analysis parameters and discussed its robustness to noise as well as its peak separation capability. This work offers a practical framework for peak separation in LEIPS, with extensions to PES and a wide range of spectroscopies.
Open AccessPeak separation methods for inverse photoelectron spectra: Comparing second derivative, curve fitting, and deconvolution analyses
Inverse photoelectron spectroscopy (IPES) is a powerful technique for probing the unoccupied electronic states of materials. It can be regarded as the inversion process of photoelectron spectroscopy (PES), which examines the occupied states. Recently developed low-energy inverse photoelectron spectroscopy (LEIPS) can significantly advance the study of unoccupied states, owing to an improved signal-to-noise ratio and minimal sample damage compared to conventional IPES. However, the instrumental resolution remains at 0.2 eV, which is one order of magnitude lower than that of PES. Spectral broadening caused by the low instrumental resolution often results in overlapping peaks. Peak separation is therefore crucial in the analysis of LEIPS spectra. In this study, we compared three peak separation methods: second derivative, curve fitting, and deconvolution. These methods were applied to modeled and experimental LEIPS spectra of the lowest unoccupied molecular orbital-derived band of pentacene, which consists of two splitting peaks due to the two inequivalent molecules in the unit cell. We systematically and quantitatively evaluated the performance of each method in terms of analysis parameters and discussed its robustness to noise as well as its peak separation capability. This work offers a practical framework for peak separation in LEIPS, with extensions to PES and a wide range of spectroscopies.
- 17 September 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (10) , 4983-4994
Interfacial Dipole Engineering via Boronic Acid-Based Self-Assembled Monolayers in Inverted Tin–Lead Perovskite Solar Cells with Ideal Band Gap
- 17 September 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (10) , 4983-4994
Interfacial Dipole Engineering via Boronic Acid-Based Self-Assembled Monolayers in Inverted Tin–Lead Perovskite Solar Cells with Ideal Band Gap
- Open Access
- 1 August 2025
- Published by American Chemical Society (ACS) in ChemRxiv
A Universal Model for Energy Level Alignment at Interfaces of Hole-Collecting Monolayers in p-i-n Perovskite Solar Cells
Hole-collecting monolayers (HCMs) have attracted considerable attention in p-i-n (inverted structure) perovskite solar cells. Although HCMs show superior performance to widely used polymers, there is confusion in the understanding of energy level alignment at electrode/HCM/perovskite interfaces, which is crucial to hole collection efficiency through HCM. In this work, ultraviolet photoelectron spectroscopy, low-energy inverse photoelectron spectroscopy, and metastable atom electron spectroscopy are employed to investigate prototypical HCMs: 2PACz, MeO-2PACz, and 3PATAT-C3. In addition, a model to describe energy level alignment at the HCM/perovskite interface is proposed, applying the semiconductor heterojunction theory to treat both layers as semiconductors. The origins of key energy parameters in the model are analyzed to establish design rules for HCM development. Particular attention is given to the oft-overlooked work function of the transparent conductive electrode. The results impart a unified understanding of energy level alignment at electrode/HCM/perovskite interfaces and provide guidelines for the rational selection and design of HCM materials.
- 1 August 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessA Universal Model for Energy Level Alignment at Interfaces of Hole-Collecting Monolayers in p-i-n Perovskite Solar Cells
Hole-collecting monolayers (HCMs) have attracted considerable attention in p-i-n (inverted structure) perovskite solar cells. Although HCMs show superior performance to widely used polymers, there is confusion in the understanding of energy level alignment at electrode/HCM/perovskite interfaces, which is crucial to hole collection efficiency through HCM. In this work, ultraviolet photoelectron spectroscopy, low-energy inverse photoelectron spectroscopy, and metastable atom electron spectroscopy are employed to investigate prototypical HCMs: 2PACz, MeO-2PACz, and 3PATAT-C3. In addition, a model to describe energy level alignment at the HCM/perovskite interface is proposed, applying the semiconductor heterojunction theory to treat both layers as semiconductors. The origins of key energy parameters in the model are analyzed to establish design rules for HCM development. Particular attention is given to the oft-overlooked work function of the transparent conductive electrode. The results impart a unified understanding of energy level alignment at electrode/HCM/perovskite interfaces and provide guidelines for the rational selection and design of HCM materials.