IDIan Davison

Ian Davison

*This is an algorithmically generated author record based on publicly available information.

Ian Davison has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • About this title - The Basins, Orogens and Evolution of the Southern Gulf of Mexico and Northern Caribbean

    by I. Davison, J. N. F. Hull, J. Pindell

    This volume brings together 17 comprehensive, data-rich analyses to provide an updated perspective on the Mexican sector of the Gulf of Mexico, Florida and the northern Caribbean. The papers span a broad range of scales and disciplines from plate tectonic evolution to sub-basin-scale analysis. Papers are broadly categorized into three themes: (1) geological evolution of the basins of the southern Gulf of Mexico in Mexico, Bahamas and Florida and their hydrocarbon potential; (2) evolution of the region's Late Cretaceous to Neogene orogens and subsequent denudation history; and (3) geological evolution of the basins and crustal elements of the northern Caribbean. This book and its extensive datasets are essential for all academic and exploration geoscientists working in this area. The volume also includes two large maps detailing the Mexican Gulf of Mexico and the Northern Caribbean areas.


  • Open Access

    The basins, orogens and evolution of the southern Gulf of Mexico and Northern Caribbean

    by Ian Davison, James Pindell, Jonathan Hull

    Our introduction to this volume highlights the most important aspects of the geology and evolution of the southern Gulf of Mexico (GoM) and the Northern Caribbean. The onshore orogens of the Mexican and Chiapas fold and thrust belts and the northern Caribbean feature prominently in the book, along with a discussion of the tectonics of the Florida-Bahamas peninsula (Fig. 1 and separate Enclosure maps at the back of this volume, Steel and Davison 2020, show the area covered). This is a particularly opportune time to focus on these regions, which have seen a recent surge in geological research and hydrocarbon exploration. Large amounts of high-quality seismic reflection data have been acquired offshore, especially in Mexico, but also in Honduras, Cuba, Jamaica and the Dominican Republic. Deregulation of the Mexican energy sector and the introduction of a series of competitive licence rounds has resulted in a new phase of hydrocarbon exploration drilling which has only just begun. Several major hydrocarbon discoveries have been made recently, foretelling the region9s huge future potential. There have not been any offshore wells drilled in the northern Caribbean in the last four years, to our knowledge.


  • Salt tectonics in the Sureste Basin, SE Mexico: some implications for hydrocarbon exploration

    by Ian Davison

    The Sureste Basin salt became diapiric soon after deposition in the Bajocian (169 Ma). Salt ridges and diapirs grew throughout the Jurassic–Cretaceous. The Mexican Fold and Thrust Belt propagated into the Sureste Basin at 70–60 Ma, causing squeezing/extrusion of allochthonous salt sheets. The more intense Mid-Miocene ( c. 13–11 Ma) compression (‘Chiapaneco Event’) produced folding and thrusting over a north–south distance of 600 km. The Mid-Miocene–Recent bulk horizontal flow is indicated by anticline and thrust traces mapped from seismic data and bathymetry. In the SE sector of the salt basin, flow is towards N60°E, where thrusting is intense and the salt is thin. The flow swings to a northerly direction in the basin centre, where folding is important. A parabolic fold arc was produced due to drag on the edges of the salt basin. This indicates that both salt and overburden behaved in a ductile manner at a large scale. Mesozoic carbonate slabs were overthrusted up to 20 km during the Mid-Miocene. Intense fracturing and karstification produced potential reservoir rocks with many untested structures that are leaking hydrocarbons. Pre-Mid-Miocene clastic reservoirs may be trapped in folds below the allochthonous salt, which also have not been drilled.


  • Deformation and sedimentation processes, and hydrocarbon accumulations on upturned salt diapir flanks in the Lusitanian Basin, Portugal

    by Ian Davison, Pedro Barreto

    The onshore Lusitanian Basin is dominated by two large diapiric salt walls which extend for up to 100 km. Seismic sections indicate that stratal onlap onto an intervening salt pillow initiated in Early Jurassic times. Well-exposed diapir flanks reveal three types of halokinetic-related unconformities (hook, low-angle wedge and high-angle flap-onlap – a new term) of Kimmeridgian to Turonian age, indicating that diapirism was active throughout this period. Stratal dip-fanning and wedge-thinning is predominantly caused by original sedimentary depositional processes with multiple low-angle unconformities (1°–5° pinchout angles) in both carbonate- and clastic-dominated sequences. No significant sedimentary slumping was observed in the clastic-dominated strata but important slumping of flank material is present in the carbonate-dominated sequences. Two tar accumulations are derived from oil trapped in sandstones on the flanks of the São Pedro de Moel and Santa Cruz salt diapirs. These are interpreted to be exhumed, but now biodegraded, oilfields. To our knowledge, these are the only exposed examples of salt-flank hydrocarbon accumulations that have been documented in the literature.


  • Sand pipe formation by liquefaction and sand injection: examples from Kodachrome Basin State Park, Utah, USA

    by Ian Davison

    The Kodachrome pipes were developed in a porous-sand host medium which is very unusual. The sub-vertical cylindrical sand pipes have previously been interpreted as injection structures with material derived from source beds near the base of the pipes. However, the large pipe formation (diameter >4 m) was probably caused by the disruption and partial liquefaction of the host sediments which have been broken into blocks by upward fluid streaming, with injection of only small amounts (<20% of pipe volume) of fluidized sand, derived from a source below. The strongest evidence for this mechanism is the sub-horizontal layering of large tabular blocks up to 4 m in length, which occurs in the largest pipes, and the preservation of traces of bedding extending from the host rock across the pipes. There is also a notable absence of rim synclines and upturned bedding around most of the pipes, which would be expected with local removal of highly viscous material containing large blocks derived from a source bed below the pipes.


  • Allochthonous salt sheet growth: Thermal implications for source rock maturation in the deepwater Burgos Basin and Perdido Fold Belt, Mexico

    by Ian Davison, Tiago Abreu Cunha

    A better understanding of suballochthonous salt petroleum systems can be achieved by thermal modeling a series of vertical pseudowell profiles that are positioned along ramps and flats identified at the base salt level. This allows the changing 2D shape of the highly conductive salt to be taken into account and assesses the physical parameters that control the thermal evolution. A case study of a typical cross section through the Burgos Basin and Perdido Fold Belt is analyzed in an area of very active oil exploration in northern Mexico. Numerical experiments indicated how the extrusion of salt cools the underlying basin and significantly prolongs the period of Tithonian source rock maturity. The rapid extrusion of thick allochthonous salt sheets, and the associated transient heat flow effects, can also cause peaks in oil generation, in places postdating the trap formation during the Oligo-Miocene folding event. The principal Tithonian source rock is predicted to have remained in the oil window since Paleogene times, despite being buried to present-day depths of approximately 8 km subsea. This upgrades the oil potential of some of the subsalt areas that are currently on offer in the CNH-R01-L04/2015 Mexico deepwater Licensing Round.


  • Review of Clastic Rift Plays along the Rift Borders of the Central South Atlantic Margins

    by Ian Davison, Paul J. Post, Jr. James Coleman, Norman C. Rosen, David E. Brown, Tina Roberts-Ashby, Peter Kahn, Mark Rowan

    The clastic fill of the rifted grabens in the central South Atlantic includes several fields containing over 1 billion barrels of oil in place. The largest fields are mainly hosted by continental fluvial and aeolian sandstones deposited near the base of the rift, before rift topography was fully developed. Footwall erosion progressively eroded back the main fault scarps, and normal faults propagated through the footwall to create terraces along the rift borders. This increased the potential drainage area on the footwall, so eventually, large alluvial fans developed in the hanging wall along the main rift border faults. The basement clast-supported conglomerates scatter seismic energy; and on seismic data, the top of the fan can appear to be the intact crystalline basement. Even when drilled, the top of the fan can still be mistaken for true basement due to the large size of the clasts. Some important oil fields are hidden below these marginal alluvial fans, within prerift and early rift fluvial and eolian sandstones and in lacustrine turbidite sandstone reservoirs. It is suggested that more fields may be found in West Africa using the model of the sub-fan terrace play. The large amount of footwall denudation of dense basement rocks can lead to unloading of the adjacent basin, as well as the footwall, when the crust has a finite flexural strength. The resulting uplift and erosion produce an ‘End of Rift’ unconformity, and it is suggested this process is likely to have caused the so called ‘Breakup’ unconformity on continental margins, rather than this being due to initiation of ocean spreading.

  • Tectonics and Sedimentation in Extensional Rifts

    by Ian Davison, John R. Underhill, Dengliang Gao

    Extensional rifts and their overlying sag basins host prolific hydrocarbon provinces in many parts of the world. This chapter reviews the development of rifts and the controls of tectonics on sedimentation patterns and hydrocarbon prospectivity. Rift tectonics exert the most important control on sedimentation and trap formation, and subsidence rate controls the geometry and facies of the rift fill. Rifting also controls the heat flow and burial history that determine the source rock maturation. Many rifts commence with evenly distributed small extensional faults when they are commonly characterized by closed drainage and continental sedimentation with localized lacustrine facies. As continental rifts develop, source rocks commonly accumulate in deep lakes, especially when the rifting is rapid, and organic shales are commonly located in the bottom third of the rift. Fault displacements increase and faults grow laterally to produce linked normal fault arrays. Marine deposits commonly replace the early rift continental deposition (e.g., North Sea) as the rift propagates to reach the world ocean system. Extremely prolific source rocks may be produced during rapid rifting in the marine phase, especially if half-graben depocenters are starved and oceanographic circulation is poor (e.g., Kimmeridge Clay Formation of northwestern Europe). As rifting wanes the rift fills, and fluvial sedimentation predominates, or in a passive margin, the basins enter into an extensional sag and/or postrift thermal sag phases when shallow-marine to deep-marine sediments infill and bury the former half grabens as sedimentation catches up and exceeds basin subsidence. Recent studies in western Australia, Brazil, and west Africa indicate that thick (unfaulted) sag basins can develop very rapidly above rifted continental crust. The subsidence is too rapid to be produced by normal thermal conductive cooling and is believed to be caused by stretching of the lower/middle crust with no observable faulting (depth-dependent stretching; Driscoll and Karner, 1998). The stretching process can produce a broad passive margin (100-500 km [62-311 mi]) where the continental crust is only 5 km (3.1 mi) thick (β = 7). The sag basin in southern Brazil reaches about 1 to 2 km (0.6–1.2 mi) in thickness and drapes over the earlier rifted blocks to produce some of the largest oil fields discovered in the last 30 yr (e.g., Lula with 20 to 30 billion bbl of oil in place). These fields are trapped in lacustrine algal-bacterial carbonates that pinch out onto the fault block crests. Many rift basins remain unexploredin remote or inaccessible areas, and new future hydrocarbon provinces are anticipated in the African, Southeast Asian, Arctic, and Atlantic margin rift basins.


  • Sub-basalt hydrocarbon prospectivity in the Rockall, Faroe–Shetland and Møre basins, NE Atlantic

    by I. Davison, S. Stasiuk, P. Nuttall, P. Keane, B. A. Vining, S. C. Pickering

    The seismic imaging below the basalts in the NE Atlantic basins is generally poor and the thickness of the basalts is difficult to predict. Two recent wells (William, 6005/13-1 and Brugdan, 6104/21-1) drilled in Faroes waters were suspended before reaching the main sub-basalt reservoir targets, because the basalts were thicker than expected. New deep-tow (18 m) seismic reflection data has now allowed more detailed imaging of the sub-basalt Mesozoic strata. The base of the basalt is not always reflective and is probably a transitional contact, with low acoustic impedance. The underlying Mesozoic strata produce coherent reflectivity. Large structural closures produced by Cretaceous rifting and Cenozoic folding have been imaged in the Rockall and Faroe–Shetland basins and these may contain Cretaceous and Paleocene clastic reservoirs at drillable depths of about 4 km. The Rockall Trough contains 4–7 km thickness of Mesozoic strata and appears to be floored by stretched continental crust throughout. The lower section may contain Jurassic source rocks similar to the areas to the south, east and north of the basin. Large Cenozoic age folds are present which produce potential traps at Late Cretaceous level, where sandstones equivalent to the Upper Cretaceous Nise Formation may occur. These folds represent some of the largest undrilled structures in NW Europe.