L. Robert Baker
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
L. Robert Baker has a total of 524 co-authors. Here are the top co-authors by number of shared publications:
- Somnath Biswas
Department of Chemical Sciences Tata Institute of Fundamental Research Mumbai Maharashtra India
19 shared publications - Quansong Zhu
Department of Chemistry and Biochemistry, The Ohio State University, Columbus, USA
11 shared publications - Jakub Husek
Department of Chemistry and Biochemistry, The Ohio State University, Columbus, Ohio 43210, United States
10 shared publications - Gabor A. Somorjai
Department of Chemistry
8 shared publications - Emily Hruska
Department of Chemistry and Biochemistry, The Ohio State University, Columbus, Ohio 43210, United States
7 shared publications - Jaclyn A. Rebstock
The Ohio State University Columbus OH 43210 USA
7 shared publications
Latest Publications
- 27 October 2026
- Published by Wiley in Angewandte Chemie International Edition
Ultrafast Charge, Spin, and Lattice Coupling Facilitates Spin Transport as Magnon–Polarons in Yttrium Iron Garnet
Low spin damping and long spin‐polarization lifetimes are essential for spintronic and spin‐based energy‐conversion technologies, yet their microscopic origin in magnetic insulators remains poorly understood. Yttrium iron garnet (YIG), a prototypical magnetic insulator exhibiting exceptionally low damping and long magnon lifetimes, provides an ideal platform to investigate how charge, spin, and lattice interactions stabilize spin‐polarized carriers. Here, we directly probe these coupled dynamics using ultrafast linearly and circularly polarized extreme‐ultraviolet (XUV) spectroscopy, which provides femtosecond time resolution together with element‐ and site‐specific sensitivity to electronic structure and spin polarization. Our measurements reveal the ultrafast formation of magnon–polaron quasiparticles mediated by strong charge–spin–lattice coupling. XUV magnetic circular dichroism (XUV‐MCD) directly resolves a transient spin reversal at the Fe tetrahedral (T d ) site on the sub‐picosecond timescale, removing the Pauli blocking that initially inhibits electron delocalization and thereby enabling efficient spin‐polarized transport. Coherent charge–lattice dynamics and phonon coherence transfer further indicate the formation of delocalized quasiparticles extending over several to tens of unit cells. These results establish a direct microscopic link between magnon–polaron formation, the long‐lived spin polarization and efficient spin transport in YIG, providing a framework for understanding how coupled spin–charge–lattice excitations govern spin transport in magnetic insulators.
- 27 October 2026
- Published by Wiley in Angewandte Chemie International Edition
Ultrafast Charge, Spin, and Lattice Coupling Facilitates Spin Transport as Magnon–Polarons in Yttrium Iron Garnet
Low spin damping and long spin‐polarization lifetimes are essential for spintronic and spin‐based energy‐conversion technologies, yet their microscopic origin in magnetic insulators remains poorly understood. Yttrium iron garnet (YIG), a prototypical magnetic insulator exhibiting exceptionally low damping and long magnon lifetimes, provides an ideal platform to investigate how charge, spin, and lattice interactions stabilize spin‐polarized carriers. Here, we directly probe these coupled dynamics using ultrafast linearly and circularly polarized extreme‐ultraviolet (XUV) spectroscopy, which provides femtosecond time resolution together with element‐ and site‐specific sensitivity to electronic structure and spin polarization. Our measurements reveal the ultrafast formation of magnon–polaron quasiparticles mediated by strong charge–spin–lattice coupling. XUV magnetic circular dichroism (XUV‐MCD) directly resolves a transient spin reversal at the Fe tetrahedral (T d ) site on the sub‐picosecond timescale, removing the Pauli blocking that initially inhibits electron delocalization and thereby enabling efficient spin‐polarized transport. Coherent charge–lattice dynamics and phonon coherence transfer further indicate the formation of delocalized quasiparticles extending over several to tens of unit cells. These results establish a direct microscopic link between magnon–polaron formation, the long‐lived spin polarization and efficient spin transport in YIG, providing a framework for understanding how coupled spin–charge–lattice excitations govern spin transport in magnetic insulators.
- 27 October 2026
- Published by Wiley in Angewandte Chemie
- p. e6099356
Ultrafast Charge, Spin, and Lattice Coupling Facilitates Spin Transport as Magnon–Polarons in Yttrium Iron Garnet
Low spin damping and long spin‐polarization lifetimes are essential for spintronic and spin‐based energy‐conversion technologies, yet their microscopic origin in magnetic insulators remains poorly understood. Yttrium iron garnet (YIG), a prototypical magnetic insulator exhibiting exceptionally low damping and long magnon lifetimes, provides an ideal platform to investigate how charge, spin, and lattice interactions stabilize spin‐polarized carriers. Here, we directly probe these coupled dynamics using ultrafast linearly and circularly polarized extreme‐ultraviolet (XUV) spectroscopy, which provides femtosecond time resolution together with element‐ and site‐specific sensitivity to electronic structure and spin polarization. Our measurements reveal the ultrafast formation of magnon–polaron quasiparticles mediated by strong charge–spin–lattice coupling. XUV magnetic circular dichroism (XUV‐MCD) directly resolves a transient spin reversal at the Fe tetrahedral (T d ) site on the sub‐picosecond timescale, removing the Pauli blocking that initially inhibits electron delocalization and thereby enabling efficient spin‐polarized transport. Coherent charge–lattice dynamics and phonon coherence transfer further indicate the formation of delocalized quasiparticles extending over several to tens of unit cells. These results establish a direct microscopic link between magnon–polaron formation, the long‐lived spin polarization and efficient spin transport in YIG, providing a framework for understanding how coupled spin–charge–lattice excitations govern spin transport in magnetic insulators.
- 27 October 2026
- Published by Wiley in Angewandte Chemie
- p. e6099356
Ultrafast Charge, Spin, and Lattice Coupling Facilitates Spin Transport as Magnon–Polarons in Yttrium Iron Garnet
Low spin damping and long spin‐polarization lifetimes are essential for spintronic and spin‐based energy‐conversion technologies, yet their microscopic origin in magnetic insulators remains poorly understood. Yttrium iron garnet (YIG), a prototypical magnetic insulator exhibiting exceptionally low damping and long magnon lifetimes, provides an ideal platform to investigate how charge, spin, and lattice interactions stabilize spin‐polarized carriers. Here, we directly probe these coupled dynamics using ultrafast linearly and circularly polarized extreme‐ultraviolet (XUV) spectroscopy, which provides femtosecond time resolution together with element‐ and site‐specific sensitivity to electronic structure and spin polarization. Our measurements reveal the ultrafast formation of magnon–polaron quasiparticles mediated by strong charge–spin–lattice coupling. XUV magnetic circular dichroism (XUV‐MCD) directly resolves a transient spin reversal at the Fe tetrahedral (T d ) site on the sub‐picosecond timescale, removing the Pauli blocking that initially inhibits electron delocalization and thereby enabling efficient spin‐polarized transport. Coherent charge–lattice dynamics and phonon coherence transfer further indicate the formation of delocalized quasiparticles extending over several to tens of unit cells. These results establish a direct microscopic link between magnon–polaron formation, the long‐lived spin polarization and efficient spin transport in YIG, providing a framework for understanding how coupled spin–charge–lattice excitations govern spin transport in magnetic insulators.
- Open Access
- 22 August 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Real-Time Observation of Dynamic Spin Polarization in Copper Oxide by Carrier Scattering with Chiral Phonons
Despite extensive experimental and theoretical efforts, the underlying mechanism of chiral-induced spin selectivity (CISS) remains elusive. Although one emerging theory is that CISS results from angular momentum exchange between electrons and chiral phonons, there has been no direct observation of spin-dependent electron–phonon scattering rates in a chiral environment. Toward this goal, ultrafast extreme ultraviolet circular dichroism (XUV-CD) was developed to measure spin-dependent thermalization and transport of hot carriers in chiral CuO. Results indicate that spin polarization emerges on the ultrafast time scale of carrier-phonon interactions and is preserved during phonon-mediated carrier hopping. These observations reveal that CISS does not operate entirely by a spin-filtering mechanism; rather, angular momentum exchange between carriers and a chiral lattice results in dynamic spin polarization.
- 22 August 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Open AccessReal-Time Observation of Dynamic Spin Polarization in Copper Oxide by Carrier Scattering with Chiral Phonons
Despite extensive experimental and theoretical efforts, the underlying mechanism of chiral-induced spin selectivity (CISS) remains elusive. Although one emerging theory is that CISS results from angular momentum exchange between electrons and chiral phonons, there has been no direct observation of spin-dependent electron–phonon scattering rates in a chiral environment. Toward this goal, ultrafast extreme ultraviolet circular dichroism (XUV-CD) was developed to measure spin-dependent thermalization and transport of hot carriers in chiral CuO. Results indicate that spin polarization emerges on the ultrafast time scale of carrier-phonon interactions and is preserved during phonon-mediated carrier hopping. These observations reveal that CISS does not operate entirely by a spin-filtering mechanism; rather, angular momentum exchange between carriers and a chiral lattice results in dynamic spin polarization.
- Open Access
- 8 July 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (8) , 5627-5632
Electrochemical CO 2 Mineralization and H 2 Generation from Steel and Coal Waste
We introduce a process that electrochemically couples CO2 capture and mineralization (CCM) with water electrolysis (WE). Leveraging the exothermicity of CO2 mineralization to sustain a reverse pH gradient, this approach lowers the potential required for WE by up to 0.39 V. Demonstration in a three-chamber reactor yields a steady-state pH gradient of 4.4, enabling WE at an onset of 1.30 V and Faradaic efficiency for CO2 fixation of 93%, corresponding to a net energy cost of < 0.5 kWh (kg CO2)–1. Abundant waste streams, including steel slag and coal ash, serve as CO2 sorbents, resulting in waste valorization to synthetic calcite. Accounting for the value of calcite, estimated H2 production costs are < 1 USD kg–1. Because CO2 fixation exceeds grid emissions for the equivalent electrical energy consumption, this process produces carbon-negative H2 using immediately available electricity. At scale, this process has the potential to mitigate > 500 Mt CO2 emissions annually.
- 8 July 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (8) , 5627-5632
Open AccessElectrochemical CO 2 Mineralization and H 2 Generation from Steel and Coal Waste
We introduce a process that electrochemically couples CO2 capture and mineralization (CCM) with water electrolysis (WE). Leveraging the exothermicity of CO2 mineralization to sustain a reverse pH gradient, this approach lowers the potential required for WE by up to 0.39 V. Demonstration in a three-chamber reactor yields a steady-state pH gradient of 4.4, enabling WE at an onset of 1.30 V and Faradaic efficiency for CO2 fixation of 93%, corresponding to a net energy cost of < 0.5 kWh (kg CO2)–1. Abundant waste streams, including steel slag and coal ash, serve as CO2 sorbents, resulting in waste valorization to synthetic calcite. Accounting for the value of calcite, estimated H2 production costs are < 1 USD kg–1. Because CO2 fixation exceeds grid emissions for the equivalent electrical energy consumption, this process produces carbon-negative H2 using immediately available electricity. At scale, this process has the potential to mitigate > 500 Mt CO2 emissions annually.
- Open Access
- 26 March 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (14) , 5258-5267
Carbonate-Enhanced Photoelectrochemical Corrosion Limits the CO 2 Reduction Reactivity on CuFeO 2 Delafossite Photocathodes
CuFeO2 delafossite materials have been researched for their promising photoactivity for CO2 reduction (CO2R) due to their intrinsic p-type conductivity. However, its practical application is limited by its poor stability and low photocurrent densities. In this work, we investigated the mechanistic origin of CuFeO2 degradation under CO2R conditions. Through photoelectrochemical measurements combined with ex situ X-ray photoelectron spectroscopy and in situ surface-enhanced Raman spectroscopy, we show that CO2-saturated sodium bicarbonate electrolytes enhance photoelectrochemical corrosion by facilitating iron leaching from the catalyst. Systematic control experiments reveal that this instability is not governed solely by thermodynamic surface stability but arises from a nonequilibrium interfacial speciation of CO2, bicarbonate, and carbonate. The presence of carbonate species at the catalyst interface facilitates iron(II) complexation and degrades the CuFeO2 surface. These findings establish carbonate-driven photoelectrochemical corrosion as a key degradation pathway for CuFeO2 and underscore the importance of speciation at the interface-electrolyte in dictating the long-term performance of a catalyst for CO2R.
- 26 March 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (14) , 5258-5267
Open AccessCarbonate-Enhanced Photoelectrochemical Corrosion Limits the CO 2 Reduction Reactivity on CuFeO 2 Delafossite Photocathodes
CuFeO2 delafossite materials have been researched for their promising photoactivity for CO2 reduction (CO2R) due to their intrinsic p-type conductivity. However, its practical application is limited by its poor stability and low photocurrent densities. In this work, we investigated the mechanistic origin of CuFeO2 degradation under CO2R conditions. Through photoelectrochemical measurements combined with ex situ X-ray photoelectron spectroscopy and in situ surface-enhanced Raman spectroscopy, we show that CO2-saturated sodium bicarbonate electrolytes enhance photoelectrochemical corrosion by facilitating iron leaching from the catalyst. Systematic control experiments reveal that this instability is not governed solely by thermodynamic surface stability but arises from a nonequilibrium interfacial speciation of CO2, bicarbonate, and carbonate. The presence of carbonate species at the catalyst interface facilitates iron(II) complexation and degrades the CuFeO2 surface. These findings establish carbonate-driven photoelectrochemical corrosion as a key degradation pathway for CuFeO2 and underscore the importance of speciation at the interface-electrolyte in dictating the long-term performance of a catalyst for CO2R.
- Open Access
- 25 March 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Electrochemical CO2 Mineralization and H2 Generation from Steel and Coal Waste
This work introduces a novel electrochemical strategy that couples CO 2 capture and mineralization (CCM) with water electrolysis (WE). Leveraging the exothermicity of CO 2 mineralization, this process sustains a reverse pH gradient, reducing the potential required for water splitting by up to 0.39 V. Experimental validation using a three-chamber reactor achieved a steady state pH gradient of 4.4 between cathode and anode. Under this condition we demonstrate WE at an onset potential of 1.30 V and a Faradaic efficiency for CO 2 fixation of 93%. This equates to an energy efficiency for CCM of 2 when considering the energy content of the generated H 2 . By combining water electrolysis with high CO 2 fixation efficiency, more CO 2 is captured than is emitted by the equivalent energy consumption from the electrical grid. Consequently, deploying this process using available electricity will immediately result in H 2 production at 500M tonnes CO 2 emissions annually.
- 25 March 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessElectrochemical CO2 Mineralization and H2 Generation from Steel and Coal Waste
This work introduces a novel electrochemical strategy that couples CO 2 capture and mineralization (CCM) with water electrolysis (WE). Leveraging the exothermicity of CO 2 mineralization, this process sustains a reverse pH gradient, reducing the potential required for water splitting by up to 0.39 V. Experimental validation using a three-chamber reactor achieved a steady state pH gradient of 4.4 between cathode and anode. Under this condition we demonstrate WE at an onset potential of 1.30 V and a Faradaic efficiency for CO 2 fixation of 93%. This equates to an energy efficiency for CCM of 2 when considering the energy content of the generated H 2 . By combining water electrolysis with high CO 2 fixation efficiency, more CO 2 is captured than is emitted by the equivalent energy consumption from the electrical grid. Consequently, deploying this process using available electricity will immediately result in H 2 production at 500M tonnes CO 2 emissions annually.
- Open Access
- 12 March 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (6) , 2904-2912
Understanding the Effects of Tensile Strain on the Structure and Magnetism of Stoichiometric LaCoO 3 Films
Despite numerous reports of an insulating ferromagnetic state in epitaxial LaCoO3 thin films, no consensus has been reached on the details of ferromagnetism in these films. To better understand the origins of magnetic order in such films, stoichiometric LaCoO3 films have been deposited on SrTiO3(001) and LaAlO3(001) substrates using off-axis sputtering. This technique allows growth to occur in conditions that minimize deviations from the ideal stoichiometry. SQUID magnetometry shows that ferromagnetism is stabilized only in films grown under tensile strain on SrTiO3. The magnetic properties of these films (T C ≈ 70 K, M sat ≈ 0.3 μB/Co, and H C ≈ 5 kOe) are essentially independent of thickness, consistent with nearly uniform magnetization. At room temperature, strain induced by the SrTiO3 substrate breaks the rhombohedral symmetry of the bulk structure, leading to a – a – c 0 octahedral tilting and an anisotropic distortion of the Co-centered octahedra. Low-temperature (T = 36 K) X-ray absorption spectroscopy reveals that tensile strain inherent to the SrTiO3 substrate stabilizes a substantial fraction of high- or intermediate-spin Co3+ ions, facilitating magnetic order, whereas films grown on LaAlO3 are made up nearly entirely of low-spin Co3+ ions.
- 12 March 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (6) , 2904-2912
Open AccessUnderstanding the Effects of Tensile Strain on the Structure and Magnetism of Stoichiometric LaCoO 3 Films
Despite numerous reports of an insulating ferromagnetic state in epitaxial LaCoO3 thin films, no consensus has been reached on the details of ferromagnetism in these films. To better understand the origins of magnetic order in such films, stoichiometric LaCoO3 films have been deposited on SrTiO3(001) and LaAlO3(001) substrates using off-axis sputtering. This technique allows growth to occur in conditions that minimize deviations from the ideal stoichiometry. SQUID magnetometry shows that ferromagnetism is stabilized only in films grown under tensile strain on SrTiO3. The magnetic properties of these films (T C ≈ 70 K, M sat ≈ 0.3 μB/Co, and H C ≈ 5 kOe) are essentially independent of thickness, consistent with nearly uniform magnetization. At room temperature, strain induced by the SrTiO3 substrate breaks the rhombohedral symmetry of the bulk structure, leading to a – a – c 0 octahedral tilting and an anisotropic distortion of the Co-centered octahedra. Low-temperature (T = 36 K) X-ray absorption spectroscopy reveals that tensile strain inherent to the SrTiO3 substrate stabilizes a substantial fraction of high- or intermediate-spin Co3+ ions, facilitating magnetic order, whereas films grown on LaAlO3 are made up nearly entirely of low-spin Co3+ ions.
- 27 August 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (45) , 41404-41412
Specifically Adsorbed Carbonate Ions and Copper Surface Reconstruction: The Effect of Double Layer Charging Revealed by Time-Resolved Sum Frequency Generation Spectroscopy
Understanding the surface interaction of adsorbed CO on Cu electrodes during electrochemical CO2R is crucial to understand the C2+ product selectivity unique to Cu. However, a significant overpotential is required to achieve the CO surface coverages on Cu necessary for CO dimerization, which is often attributed to site blocking by specific anion adsorption. Performing time-resolved vibrational sum frequency generation with spectral collection sufficiently fast to resolve electrochemical double layer (EDL) charging, the time-resolved frequency shift of CO is measured following a potential jump. Prior to CO desorption, frequency shifts specific to EDL reconstruction and the associated electric field change (Stark tuning response) are isolated from the competing effects of dipolar coupling and CO coverage-induced surface reconstruction. This enables the first measurement of a Stark tuning slope in the potential region where specific anion adsorption has been predicted to occur on Cu. The results reveal a surprising potential-dependent frequency profile with a 4-fold lower Stark tuning slope than expected for a clean Cu surface based on Gouy-Chapman-Stern theory. From this, we determine the absolute surface charge density of the Cu electrode as a function of potential and show that specific anion adsorption cannot account for CO site blocking. Rather, results reveal that Cu is at least 50% oxidized at potentials as negative as -0.2 V vs RHE, indicating that CO desorption occurs by Cu reconstruction to a malachite-like surface on the millisecond time scale mediated by EDL charging.
- 27 August 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (45) , 41404-41412
Specifically Adsorbed Carbonate Ions and Copper Surface Reconstruction: The Effect of Double Layer Charging Revealed by Time-Resolved Sum Frequency Generation Spectroscopy
Understanding the surface interaction of adsorbed CO on Cu electrodes during electrochemical CO2R is crucial to understand the C2+ product selectivity unique to Cu. However, a significant overpotential is required to achieve the CO surface coverages on Cu necessary for CO dimerization, which is often attributed to site blocking by specific anion adsorption. Performing time-resolved vibrational sum frequency generation with spectral collection sufficiently fast to resolve electrochemical double layer (EDL) charging, the time-resolved frequency shift of CO is measured following a potential jump. Prior to CO desorption, frequency shifts specific to EDL reconstruction and the associated electric field change (Stark tuning response) are isolated from the competing effects of dipolar coupling and CO coverage-induced surface reconstruction. This enables the first measurement of a Stark tuning slope in the potential region where specific anion adsorption has been predicted to occur on Cu. The results reveal a surprising potential-dependent frequency profile with a 4-fold lower Stark tuning slope than expected for a clean Cu surface based on Gouy-Chapman-Stern theory. From this, we determine the absolute surface charge density of the Cu electrode as a function of potential and show that specific anion adsorption cannot account for CO site blocking. Rather, results reveal that Cu is at least 50% oxidized at potentials as negative as -0.2 V vs RHE, indicating that CO desorption occurs by Cu reconstruction to a malachite-like surface on the millisecond time scale mediated by EDL charging.
- Top Cited Papers
- 18 February 2025
- Published by Springer Nature in Nature Nanotechnology
- Vol. 20 (4) , 515-522
Molecular-scale CO spillover on a dual-site electrocatalyst enhances methanol production from CO2 reduction
Cobalt phthalocyanine (CoPc) is recognized for catalysing electrochemical CO2 reduction into methanol at high Faradaic efficiency but is subject to deactivation. Cobalt tetraaminophthalocyanine (CoPc-NH2) shows improved stability, but its methanol Faradaic efficiency is below 30%. This study addresses these limitations in selectivity, reactivity and stability by rationally designing a dual-site cascade catalyst. Here we quantify the local concentration of CO, a key intermediate of the reaction, near a working CoPc-NH2 catalyst and show that co-loading nickel tetramethoxyphthalocyanine (NiPc-OCH3) with CoPc-NH2 on multiwalled carbon nanotubes increases the generation and local concentration of CO. This dual-site cascade catalyst exhibits substantially higher performance than the original single-site CoPc-NH2/carbon nanotube catalyst, reaching a partial current density of 150 mA cm−2 and a Faradaic efficiency of 50% for methanol production. Kinetic analysis and in situ sum-frequency generation vibrational spectroscopy attribute this notable performance improvement to molecular-scale CO spillover from NiPc-OCH3 sites to methanol-active CoPc-NH2 sites.
- 18 February 2025
- Published by Springer Nature in Nature Nanotechnology
- Vol. 20 (4) , 515-522
Top Cited PapersMolecular-scale CO spillover on a dual-site electrocatalyst enhances methanol production from CO2 reduction
Cobalt phthalocyanine (CoPc) is recognized for catalysing electrochemical CO2 reduction into methanol at high Faradaic efficiency but is subject to deactivation. Cobalt tetraaminophthalocyanine (CoPc-NH2) shows improved stability, but its methanol Faradaic efficiency is below 30%. This study addresses these limitations in selectivity, reactivity and stability by rationally designing a dual-site cascade catalyst. Here we quantify the local concentration of CO, a key intermediate of the reaction, near a working CoPc-NH2 catalyst and show that co-loading nickel tetramethoxyphthalocyanine (NiPc-OCH3) with CoPc-NH2 on multiwalled carbon nanotubes increases the generation and local concentration of CO. This dual-site cascade catalyst exhibits substantially higher performance than the original single-site CoPc-NH2/carbon nanotube catalyst, reaching a partial current density of 150 mA cm−2 and a Faradaic efficiency of 50% for methanol production. Kinetic analysis and in situ sum-frequency generation vibrational spectroscopy attribute this notable performance improvement to molecular-scale CO spillover from NiPc-OCH3 sites to methanol-active CoPc-NH2 sites.
- Open Access
- 6 January 2025
- Published by American Chemical Society (ACS) in ACS Central Science
- Vol. 11 (1) , 12-18
NSF NeXUS: A New Model for Accessing the Frontiers of Ultrafast Science
NSF NeXUS is an open-access user facility that enables observation of electron motion with sub-femtosecond time resolution, angstrom spatial resolution, and element-specific spectral resolution.
- 6 January 2025
- Published by American Chemical Society (ACS) in ACS Central Science
- Vol. 11 (1) , 12-18
Open AccessNSF NeXUS: A New Model for Accessing the Frontiers of Ultrafast Science
NSF NeXUS is an open-access user facility that enables observation of electron motion with sub-femtosecond time resolution, angstrom spatial resolution, and element-specific spectral resolution.