Lina Hasenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lina Hasenko has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Tetyana Lytvynenko
National University «Yu. Kondratyuk Poltava Polytechnic
8 shared publications - Iryna Tkachenko
National University «Yuri Kondratyuk Poltava Polytechnic
5 shared publications - Anton Hasenko
National University «Yuri Kondratyuk Poltava Polytechnic
3 shared publications - Mohamed Elgandour
National University “Yuri Kondratyuk Poltava Polytechnic
3 shared publications - Grygorii Sharyi
National University "Yuri Kondratyuk Poltava Polytechnic
2 shared publications - Nataliia Mahas
Slovak University of Technology in Bratislava
2 shared publications
Latest Publications
- Open Access
- 22 April 2025
- Published by Ukrainian State University of Railway Transport in Collection of scientific works of the Ukrainian State University of Railway Transport
- No. 211,p. 130-137
THE FIBERS OF THE STEEL REINFORCED CONCRETE SLAB STRAIN CHANGE FOR SHELTER OF THE CIVIL PROTECTION DURING THE TWO-STAGE TECHNOLOGY OF SLAB MANUFACTURING
There are often no technical specifications and technological maps for the installation of built-in shelters in existing structural and planning schemes of buildings. Atypical architectural and structural solutions for protective structures can be implemented using monolithic or precast concrete and steel-reinforced concrete structures. Due to the two-stage technology for the manufacture of precast steel reinforced concrete slabs, the geometric characteristics of their composite cross-sections change during the manufacturing process. Changes in cross-sections of building structure elements during the manufacturing process are commonly referred to as genetic nonlinearity. At the same time, in most cases, the change (increase due to the monolithic upper concrete shelf) of the cross-section of a steel-reinforced concrete slab element occurs under different deformations in its components: the existing deformations in the steel part from the dead weight of the monolithic concrete slab and the absence of deformations in the monolithic concrete slab. This fact is the reason for the bilinear appearance (discontinuity of the linear appearance at the border of the upper shelf of the steel I-beam and the bottom of the concrete slab) of the diagram of strains in the cross section of steel reinforced concrete slabs. It is possible to avoid the genetic nonlinearity of steel reinforced concrete slabs by installing temporary supports for steel beams during the concreting of the monolithic slab or by constructing the monolithic slab on inventory temporary formwork. By installing the above-mentioned temporary posts, it is possible, on the contrary, to achieve favorable pre-stresses in the components, which can be called self-stressing of such slabs. During the experimental loading of a fragment of a pre-stressing steel-reinforced concrete slab, the increase in relative deformations along the height of the cross-section, taking into account the pre-bending of steel beams, is similar to those predicted during the theoretical analysis of the stress-strain state of such beams. Taking into account the pre-stressing of the steel beams allowed us to reduce their cross-section from a rolled I-beam № 45 to an I-beam № 36 with a strip along the bottom girdle, which reduces steel consumption by 11.1 %.
- 22 April 2025
- Published by Ukrainian State University of Railway Transport in Collection of scientific works of the Ukrainian State University of Railway Transport
- No. 211,p. 130-137
Open AccessTHE FIBERS OF THE STEEL REINFORCED CONCRETE SLAB STRAIN CHANGE FOR SHELTER OF THE CIVIL PROTECTION DURING THE TWO-STAGE TECHNOLOGY OF SLAB MANUFACTURING
There are often no technical specifications and technological maps for the installation of built-in shelters in existing structural and planning schemes of buildings. Atypical architectural and structural solutions for protective structures can be implemented using monolithic or precast concrete and steel-reinforced concrete structures. Due to the two-stage technology for the manufacture of precast steel reinforced concrete slabs, the geometric characteristics of their composite cross-sections change during the manufacturing process. Changes in cross-sections of building structure elements during the manufacturing process are commonly referred to as genetic nonlinearity. At the same time, in most cases, the change (increase due to the monolithic upper concrete shelf) of the cross-section of a steel-reinforced concrete slab element occurs under different deformations in its components: the existing deformations in the steel part from the dead weight of the monolithic concrete slab and the absence of deformations in the monolithic concrete slab. This fact is the reason for the bilinear appearance (discontinuity of the linear appearance at the border of the upper shelf of the steel I-beam and the bottom of the concrete slab) of the diagram of strains in the cross section of steel reinforced concrete slabs. It is possible to avoid the genetic nonlinearity of steel reinforced concrete slabs by installing temporary supports for steel beams during the concreting of the monolithic slab or by constructing the monolithic slab on inventory temporary formwork. By installing the above-mentioned temporary posts, it is possible, on the contrary, to achieve favorable pre-stresses in the components, which can be called self-stressing of such slabs. During the experimental loading of a fragment of a pre-stressing steel-reinforced concrete slab, the increase in relative deformations along the height of the cross-section, taking into account the pre-bending of steel beams, is similar to those predicted during the theoretical analysis of the stress-strain state of such beams. Taking into account the pre-stressing of the steel beams allowed us to reduce their cross-section from a rolled I-beam № 45 to an I-beam № 36 with a strip along the bottom girdle, which reduces steel consumption by 11.1 %.
- 19 December 2023
- Published by Springer Nature
- p. 121-132
Street and Urban Road Network Geospatial Analysis: Case Study of the Poltava City, Ukraine
- 19 December 2023
- Published by Springer Nature
- p. 121-132
Street and Urban Road Network Geospatial Analysis: Case Study of the Poltava City, Ukraine
- 9 March 2023
- Published by Springer Nature
- p. 433-440
Settlements Preparation to Future Transport Progress
- 9 March 2023
- Published by Springer Nature
- p. 433-440
Settlements Preparation to Future Transport Progress
- 22 February 2023
- Published by Springer Nature
- p. 576-585
Streets and Urban Roads Surface Runoff Problems: A Case Study in the Poltava City, Ukraine
- 22 February 2023
- Published by Springer Nature
- p. 576-585
Streets and Urban Roads Surface Runoff Problems: A Case Study in the Poltava City, Ukraine
- 29 November 2022
- Published by Springer Nature
- p. 854-864
Urban Street and Road Network Reconstruction Problems
- 29 November 2022
- Published by Springer Nature
- p. 854-864
Urban Street and Road Network Reconstruction Problems
- 30 June 2022
- Published by National Transport University in Automobile Roads and Road Construction
- No. 111,p. 45-54
PRINCIPLES OF STREET AND ROAD SPACE REDISTRIBUTION IN ACCORDANCE WITH MODERN URBAN PLANNING TRENDS
. The article analyzes the modern urban trends of street and road space redistribution, which in recent years are reflected in the regulations of Ukraine. The basic options for such redistribution are: narrowing of lanes for private transport (allowed by updated regulations in Ukraine); reducing the number of lanes for private transport (which does not always reduce the roadway capacity). As a result of foreign experience analysis the stages in which redistribution of street and road space can be carried out are revealed: pilot actions (temporary marking, road barriers and change of traffic organization); intermediate steps of reconstruction (application of new markings, installation of stationary and sliding columns, mobile flower beds, containers with young trees or bushes, large natural stones, lanterns, benches, etc.); comprehensive reorganization of streets and spaces (sidewalks widening, curbs moving, bike lanes allocating or separating, installing of elements to slow down traffic, organizational measures to optimize traffic lights, relocation of utilities, drainage and storm sewer systems, etc.). As a result of the analysis of modern tendencies in designing settlements’ streets and roads and world experience of these tendencies realization, the following principles of street and road space redistribution are formulated: the principle of equality in the right of use, based on space availability for people of any social class, age and state of health; the principle of security, which is to give citizens the opportunity to feel protected on the streets of their city; the principle of diversity of activities, which aims to provide all social groups with accessible and diverse types of recreation and leisure in public spaces; the principle of comfortable microclimate, which is to ensure the comfort of residents on the settlements streets, and the principle of aesthetics, ensuring an attractive appearance of urban spaces.
- 30 June 2022
- Published by National Transport University in Automobile Roads and Road Construction
- No. 111,p. 45-54
PRINCIPLES OF STREET AND ROAD SPACE REDISTRIBUTION IN ACCORDANCE WITH MODERN URBAN PLANNING TRENDS
. The article analyzes the modern urban trends of street and road space redistribution, which in recent years are reflected in the regulations of Ukraine. The basic options for such redistribution are: narrowing of lanes for private transport (allowed by updated regulations in Ukraine); reducing the number of lanes for private transport (which does not always reduce the roadway capacity). As a result of foreign experience analysis the stages in which redistribution of street and road space can be carried out are revealed: pilot actions (temporary marking, road barriers and change of traffic organization); intermediate steps of reconstruction (application of new markings, installation of stationary and sliding columns, mobile flower beds, containers with young trees or bushes, large natural stones, lanterns, benches, etc.); comprehensive reorganization of streets and spaces (sidewalks widening, curbs moving, bike lanes allocating or separating, installing of elements to slow down traffic, organizational measures to optimize traffic lights, relocation of utilities, drainage and storm sewer systems, etc.). As a result of the analysis of modern tendencies in designing settlements’ streets and roads and world experience of these tendencies realization, the following principles of street and road space redistribution are formulated: the principle of equality in the right of use, based on space availability for people of any social class, age and state of health; the principle of security, which is to give citizens the opportunity to feel protected on the streets of their city; the principle of diversity of activities, which aims to provide all social groups with accessible and diverse types of recreation and leisure in public spaces; the principle of comfortable microclimate, which is to ensure the comfort of residents on the settlements streets, and the principle of aesthetics, ensuring an attractive appearance of urban spaces.
- Open Access
- 24 December 2021
- Published by Yuri Kondratyuk Poltava Polytechnic in Збірник наукових праць Галузеве машинобудування будівництво/ Academic journal Industrial Machine Building Civil Engineering
- Vol. 2 (57) , 47-52
Temperature-humidity regime in the operation of the roofs of historic buildings
The article presents the experience of developing engineering solutions for the restoration and preservation of cold pitched attic structures on the example of a historic building in Poltava. A preliminary design solution for the thermal modernization of the attic floor was analyzed, which included the placement of mineral wool insulation in the attic in accordance with requirements of DBN V.2.6-31:2016 with a thickness of 250 mm. Increasing the thickness of the insulation to modern requirements for energy efficiency on a reinforced concrete floor could lead to a decrease in the temperature in the attic, which, in turn, would not contribute to the melting of snow on the roof, which occurred in the last 70 years of the building's operation. A possible increase in snow load along with cooling of the steel truss elements to -20°C can cause brittle fracture of truss elements made of boiling steel. The thickness of the insulation along the attic floor should be taken no more than 100 mm in order to reduce transmission heat losses and maintain a positive temperature in the attic space.
- 24 December 2021
- Published by Yuri Kondratyuk Poltava Polytechnic in Збірник наукових праць Галузеве машинобудування будівництво/ Academic journal Industrial Machine Building Civil Engineering
- Vol. 2 (57) , 47-52
Open AccessTemperature-humidity regime in the operation of the roofs of historic buildings
The article presents the experience of developing engineering solutions for the restoration and preservation of cold pitched attic structures on the example of a historic building in Poltava. A preliminary design solution for the thermal modernization of the attic floor was analyzed, which included the placement of mineral wool insulation in the attic in accordance with requirements of DBN V.2.6-31:2016 with a thickness of 250 mm. Increasing the thickness of the insulation to modern requirements for energy efficiency on a reinforced concrete floor could lead to a decrease in the temperature in the attic, which, in turn, would not contribute to the melting of snow on the roof, which occurred in the last 70 years of the building's operation. A possible increase in snow load along with cooling of the steel truss elements to -20°C can cause brittle fracture of truss elements made of boiling steel. The thickness of the insulation along the attic floor should be taken no more than 100 mm in order to reduce transmission heat losses and maintain a positive temperature in the attic space.
- Open Access
- 30 December 2020
- Published by Yuri Kondratyuk Poltava Polytechnic in Збірник наукових праць Галузеве машинобудування будівництво/ Academic journal Industrial Machine Building Civil Engineering
- Vol. 2 (55) , 102-108
Considering the availability of cold bridges in the design of thermal insulation shell of sandwich panels element-by-element assembly
The work is devoted to the refinement of engineering methods for calculating heat loss through structures made of prefabricated sandwich panels. At buildings installation in places of steel structures adjunction "cold bridges" and, as a result, condensate and mildew are formed. Heat loss due to "cold bridges" can reach up to 50% of the total house heat loss and affect its energy efficiency class. The paper presents typical energy-efficient structural units of enclosing structures made of sandwich panels and the results of these nodes temperature field modelling, which allow by the DSTU ISO 10211: 2005 method to determine the linear heat transfer coefficients, which can be used in engineering calculations of relevant structures transfer resistance and supplement Annex G in DSTU B V.2.6-189: 2013. Calculation of the linear coefficient of thermal conductivity for different variants of structures adjacency will avoid thermal failures and increase the energy efficiency class of buildings
- 30 December 2020
- Published by Yuri Kondratyuk Poltava Polytechnic in Збірник наукових праць Галузеве машинобудування будівництво/ Academic journal Industrial Machine Building Civil Engineering
- Vol. 2 (55) , 102-108
Open AccessConsidering the availability of cold bridges in the design of thermal insulation shell of sandwich panels element-by-element assembly
The work is devoted to the refinement of engineering methods for calculating heat loss through structures made of prefabricated sandwich panels. At buildings installation in places of steel structures adjunction "cold bridges" and, as a result, condensate and mildew are formed. Heat loss due to "cold bridges" can reach up to 50% of the total house heat loss and affect its energy efficiency class. The paper presents typical energy-efficient structural units of enclosing structures made of sandwich panels and the results of these nodes temperature field modelling, which allow by the DSTU ISO 10211: 2005 method to determine the linear heat transfer coefficients, which can be used in engineering calculations of relevant structures transfer resistance and supplement Annex G in DSTU B V.2.6-189: 2013. Calculation of the linear coefficient of thermal conductivity for different variants of structures adjacency will avoid thermal failures and increase the energy efficiency class of buildings