Ibrahim Mustapha Alibe
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ibrahim Mustapha Alibe has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Khamirul Amin Matori
Department of Physics, Faculty of Science, Universiti Putra Malaysia, Serdang, Malaysia
6 shared publications - Haji Abdul Aziz Sidek
Department of Physics, University Putra Malaysia, Serdang 43400, Selangor, Malaysia
4 shared publications - Mohd Hafiz Mohd Zaid
Department of Physics, Faculty of Science, Universiti Putra Malaysia, UPM, Serdang, Malaysia
4 shared publications - Mohammad Zulhasif Ahmad Khiri
Department of Physics, Faculty of Science, Universiti Putra Malaysia (UPM), Serdang 43400, Selangor, Malaysia
2 shared publications - Umer Rashid
Department of Chemistry, COMSATS University Islamabad, Abbottabad Campus, Pakistan
2 shared publications - Alex See
Department of Physics, Faculty of Science, Universiti Putra Malaysia, Serdang, Malaysia
1 shared publication
Latest Publications
- Open Access
- 17 August 2025
- Published by Faculty of Engineering, Bayero University in BAYERO JOURNAL OF ENGINEERING AND TECHNOLOGY
- Vol. 20 (2) , 5-14
Valorization of Waste Soda Lime Silica Glass for the Fabrication of ZnO/SLS Glass System: Thermal and Compositional Analysis for Advanced Material Applications
In the 21st century, the demand for sustainable solutions in advanced technologies has intensified, prompting significant interest in the valorization of industrial and post-consumer waste streams. Among these, waste glass particularly soda lime silica (SLS) glass has emerged as a promising precursor material for the development of low-energy optoelectronic components. This study investigates the thermal, compositional, physical, structural, and optical properties of a novel ZnO/SLS glass system. The precursor glasses were successfully synthesized via the conventional melt-quenching technique. Energy Dispersive X-ray Fluorescence (EDXRF) analysis revealed that all elemental constituents were measured in their oxide forms. The major oxide components identified were ZnO, SiO₂, CaO, and Na₂O, collectively accounting for approximately 95 wt.% of the total glass composition. Minor constituents included K₂O and MgO, while trace oxides such as BaO, Cr₂O₃, Fe₂O₃, and B₂O₃ were present in amounts typically below 1 wt.%. An increase in ZnO content within the SLS glass matrix led to a corresponding decrease in the concentration of other major oxides such as SiO₂, CaO, and Na₂O. This compositional adjustment was optimized to enhance the physical and elastic properties of the glass system, with improved durability attributed to the reduced CaO content. Differential Thermal Analysis (DTA) conducted at a heating rate of 10 °C/min indicated a decrease in both the glass transition temperature (Tg) and crystallization temperature (Tc) with increasing ZnO content. This thermal behavior is ascribed to the reduction in melt viscosity caused by the higher ZnO concentration, resulting in a Tg and Tc decrease of approximately 50–60 °C. Density measurements, performed to assess molecular packing efficiency, showed that the glass density increased from 2.520 to 2.842 g/cm³ with increasing ZnO content. This trend is primarily attributed to the higher atomic mass of Zn (65.390 amu) compared to Si (28.086 amu), Ca (40.078 amu), and Na (22.989 amu). Additionally, the increase in density corresponds to variations in the cross-link density within the glass network. The resulting ZnO/SLS glass system demonstrates promising characteristics for potential use in advanced material applications.
- 17 August 2025
- Published by Faculty of Engineering, Bayero University in BAYERO JOURNAL OF ENGINEERING AND TECHNOLOGY
- Vol. 20 (2) , 5-14
Open AccessValorization of Waste Soda Lime Silica Glass for the Fabrication of ZnO/SLS Glass System: Thermal and Compositional Analysis for Advanced Material Applications
In the 21st century, the demand for sustainable solutions in advanced technologies has intensified, prompting significant interest in the valorization of industrial and post-consumer waste streams. Among these, waste glass particularly soda lime silica (SLS) glass has emerged as a promising precursor material for the development of low-energy optoelectronic components. This study investigates the thermal, compositional, physical, structural, and optical properties of a novel ZnO/SLS glass system. The precursor glasses were successfully synthesized via the conventional melt-quenching technique. Energy Dispersive X-ray Fluorescence (EDXRF) analysis revealed that all elemental constituents were measured in their oxide forms. The major oxide components identified were ZnO, SiO₂, CaO, and Na₂O, collectively accounting for approximately 95 wt.% of the total glass composition. Minor constituents included K₂O and MgO, while trace oxides such as BaO, Cr₂O₃, Fe₂O₃, and B₂O₃ were present in amounts typically below 1 wt.%. An increase in ZnO content within the SLS glass matrix led to a corresponding decrease in the concentration of other major oxides such as SiO₂, CaO, and Na₂O. This compositional adjustment was optimized to enhance the physical and elastic properties of the glass system, with improved durability attributed to the reduced CaO content. Differential Thermal Analysis (DTA) conducted at a heating rate of 10 °C/min indicated a decrease in both the glass transition temperature (Tg) and crystallization temperature (Tc) with increasing ZnO content. This thermal behavior is ascribed to the reduction in melt viscosity caused by the higher ZnO concentration, resulting in a Tg and Tc decrease of approximately 50–60 °C. Density measurements, performed to assess molecular packing efficiency, showed that the glass density increased from 2.520 to 2.842 g/cm³ with increasing ZnO content. This trend is primarily attributed to the higher atomic mass of Zn (65.390 amu) compared to Si (28.086 amu), Ca (40.078 amu), and Na (22.989 amu). Additionally, the increase in density corresponds to variations in the cross-link density within the glass network. The resulting ZnO/SLS glass system demonstrates promising characteristics for potential use in advanced material applications.
- Open Access
Polymer Thermal Treatment Production of Cerium Doped Willemite Nanoparticles: An Analysis of Structure, Energy Band Gap and Luminescence Properties
The contemporary market needs for enhanced solid–state lighting devices has led to an increased demand for the production of willemite based phosphors using low-cost techniques. In this study, Ce3+ doped willemite nanoparticles were fabricated using polymer thermal treatment method. The special effects of the calcination temperatures and the dopant concentration on the structural and optical properties of the material were thoroughly studied. The XRD analysis of the samples treated at 900 °C revealed the development and or materialization of the willemite phase. The increase in the dopant concentration causes an expansion of the lattice owing to the replacement of larger Ce3+ ions for smaller Zn2+ ions. Based on the FESEM and TEM micrographs, the nanoparticles size increases with the increase in the cerium ions. The mean particles sizes were estimated to be 23.61 nm at 1 mol% to 34.02 nm at 5 mol% of the cerium dopant. The optical band gap energy of the doped samples formed at 900 °C decreased precisely by 0.21 eV (i.e., 5.21 to 5.00 eV). The PL analysis of the doped samples exhibits a strong emission at 400 nm which is ascribed to the transition of an electron from localized Ce2f state to the valence band of O2p. The energy level of the Ce3+ ions affects the willemite crystal lattice, thus causing a decrease in the intensity of the green emission at 530 nm and the blue emission at 485 nm. The wide optical band gap energy of the willemite produced is expected to pave the way for exciting innovations in solid–state lighting applications.
Open AccessPolymer Thermal Treatment Production of Cerium Doped Willemite Nanoparticles: An Analysis of Structure, Energy Band Gap and Luminescence Properties
The contemporary market needs for enhanced solid–state lighting devices has led to an increased demand for the production of willemite based phosphors using low-cost techniques. In this study, Ce3+ doped willemite nanoparticles were fabricated using polymer thermal treatment method. The special effects of the calcination temperatures and the dopant concentration on the structural and optical properties of the material were thoroughly studied. The XRD analysis of the samples treated at 900 °C revealed the development and or materialization of the willemite phase. The increase in the dopant concentration causes an expansion of the lattice owing to the replacement of larger Ce3+ ions for smaller Zn2+ ions. Based on the FESEM and TEM micrographs, the nanoparticles size increases with the increase in the cerium ions. The mean particles sizes were estimated to be 23.61 nm at 1 mol% to 34.02 nm at 5 mol% of the cerium dopant. The optical band gap energy of the doped samples formed at 900 °C decreased precisely by 0.21 eV (i.e., 5.21 to 5.00 eV). The PL analysis of the doped samples exhibits a strong emission at 400 nm which is ascribed to the transition of an electron from localized Ce2f state to the valence band of O2p. The energy level of the Ce3+ ions affects the willemite crystal lattice, thus causing a decrease in the intensity of the green emission at 530 nm and the blue emission at 485 nm. The wide optical band gap energy of the willemite produced is expected to pave the way for exciting innovations in solid–state lighting applications.
- Open Access
- 14 November 2018
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 136 (6) , 2249-2268
Effects of polyvinylpyrrolidone on structural and optical properties of willemite semiconductor nanoparticles by polymer thermal treatment method
- 14 November 2018
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 136 (6) , 2249-2268
Open AccessEffects of polyvinylpyrrolidone on structural and optical properties of willemite semiconductor nanoparticles by polymer thermal treatment method
- Open Access
Effects of Calcination Holding Time on Properties of Wide Band Gap Willemite Semiconductor Nanoparticles by the Polymer Thermal Treatment Method
Willemite is a wide band gap semiconductor used in modern day technology for optoelectronics application. In this study, a new simple technique with less energy consumption is proposed. Willemite nanoparticles (NPs) were produced via a water–based solution consisting of a metallic precursor, polyvinylpyrrolidone (PVP), and underwent a calcination process at 900 °C for several holding times between 1–4 h. The FT–IR and Raman spectra indicated the presence of metal oxide bands as well as the effective removal of PVP. The degree of the crystallization and formation of the NPs were determined by XRD. The mean crystallite size of the NPs was between 18.23–27.40 nm. The morphology, particle shape and size distribution were viewed with HR-TEM and FESEM analysis. The willemite NPs aggregate from the smaller to larger particles with an increase in calcination holding time from 1–4 h with the sizes ranging between 19.74–29.71 nm. The energy values obtained from the experimental band gap decreased with increasing the holding time over the range of 5.39 eV at 1 h to at 5.27 at 4 h. These values match well with band gap obtained from the Mott and Davis model for direct transition. The findings in this study are very promising and can justify the use of these novel materials as a potential candidate for green luminescent optoelectronic applications.
Open AccessEffects of Calcination Holding Time on Properties of Wide Band Gap Willemite Semiconductor Nanoparticles by the Polymer Thermal Treatment Method
Willemite is a wide band gap semiconductor used in modern day technology for optoelectronics application. In this study, a new simple technique with less energy consumption is proposed. Willemite nanoparticles (NPs) were produced via a water–based solution consisting of a metallic precursor, polyvinylpyrrolidone (PVP), and underwent a calcination process at 900 °C for several holding times between 1–4 h. The FT–IR and Raman spectra indicated the presence of metal oxide bands as well as the effective removal of PVP. The degree of the crystallization and formation of the NPs were determined by XRD. The mean crystallite size of the NPs was between 18.23–27.40 nm. The morphology, particle shape and size distribution were viewed with HR-TEM and FESEM analysis. The willemite NPs aggregate from the smaller to larger particles with an increase in calcination holding time from 1–4 h with the sizes ranging between 19.74–29.71 nm. The energy values obtained from the experimental band gap decreased with increasing the holding time over the range of 5.39 eV at 1 h to at 5.27 at 4 h. These values match well with band gap obtained from the Mott and Davis model for direct transition. The findings in this study are very promising and can justify the use of these novel materials as a potential candidate for green luminescent optoelectronic applications.
- 25 October 2017
- Published by Springer Nature in Journal of the Australian Ceramic Society
- Vol. 54 (2) , 307-316
Structural, electrical conductivity and dielectric relaxation behavior of LiHf2(PO4)3 ceramic powders
- 25 October 2017
- Published by Springer Nature in Journal of the Australian Ceramic Society
- Vol. 54 (2) , 307-316
Structural, electrical conductivity and dielectric relaxation behavior of LiHf2(PO4)3 ceramic powders
- 1 October 2016
- Published by Elsevier in Journal of Non-Crystalline Solids
- Vol. 449, 107-112
Comprehensive study on compositional dependence of optical band gap in zinc soda lime silica glass system for optoelectronic applications
- 1 October 2016
- Published by Elsevier in Journal of Non-Crystalline Solids
- Vol. 449, 107-112
Comprehensive study on compositional dependence of optical band gap in zinc soda lime silica glass system for optoelectronic applications
- 24 June 2016
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 27 (11) , 11158-11167
Synthesis and characterization of low cost willemite based glass–ceramic for opto-electronic applications
- 24 June 2016
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 27 (11) , 11158-11167
Synthesis and characterization of low cost willemite based glass–ceramic for opto-electronic applications