Bruno Azambre
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bruno Azambre has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
A. Roynette
2 shared publicationsB. Marcillaud
2 shared publicationsC. Monsanglant-Louvet
2 shared publicationsM. Chebbi
2 shared publications- Mouheb Chebbi
Autorité de Sûreté Nucléaire et de Radioprotection (ASNR), PSN-RES/SCA/LECEV, Saclay F-91400, France
2 shared publications - Alexandre Westermann
Université de Lyon, CNRS, Université Claude Bernard Lyon 1, IRCELYON, UMR 5256, 2 Avenue A. Einstein, 69626 Villeurbanne, France
1 shared publication
Latest Publications
- 1 March 2025
- Published by Elsevier in Journal of Nuclear Materials
- Vol. 608
Unravelling the potential of iodine isotopic exchange in CH3131I capture by K127I-impregnated activated carbons
- 1 March 2025
- Published by Elsevier in Journal of Nuclear Materials
- Vol. 608
Unravelling the potential of iodine isotopic exchange in CH3131I capture by K127I-impregnated activated carbons
- Open Access
- 14 May 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (5) , 1300
Structure–Activity Relationships between the State of Silver on Different Supports and Their I2 and CH3I Adsorption Properties
In this study, the performances of silver-impregnated adsorbents prepared from different host supports (SBA-15, alumina, ceria, and faujasite Y zeolite) and calcined or not at 500 °C (1 h) were compared for the capture of I2 and CH3I. By keeping the silver content rather similar (about 15–17 wt %) among the sorbents, it was possible to assess the effect of silver dispersion and speciation on the adsorption capacities measured for both adsorbates. In a first part, several characterization techniques (XRD, DRS-UV-Vis, TEM, etc.) were used to probe the state of silver in the calcined and non-calcined materials. It was found that the characteristics of silver species are strongly influenced by the thermal treatment, the presence or absence of exchange sites, and the stability of the supports. Silver agglomeration was enhanced after calcination at 500 °C especially for supports bearing no exchange sites (SBA-15) or no ordered pores (alumina and ceria). Then, the adsorption performances of the studied silver sorbents were discussed in relation with their physicochemical characteristics. After-test characterizations were useful to assess the proportion of silver species that have reacted with CH3I and I2 to yield AgI precipitates. Depending on the adsorbate, different trends were obtained. I2 adsorption/reaction with silver sites was found to be quantitative (I/Ag ≈1), whatever the silver speciation and dispersion on the support. By contrast, a high proportion of cationic silver species was found essential to increase CH3I adsorption (I/Ag about 0.6–0.7 against 0.2–0.3 for Ag agglomerated species).
- 14 May 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (5) , 1300
Open AccessStructure–Activity Relationships between the State of Silver on Different Supports and Their I2 and CH3I Adsorption Properties
In this study, the performances of silver-impregnated adsorbents prepared from different host supports (SBA-15, alumina, ceria, and faujasite Y zeolite) and calcined or not at 500 °C (1 h) were compared for the capture of I2 and CH3I. By keeping the silver content rather similar (about 15–17 wt %) among the sorbents, it was possible to assess the effect of silver dispersion and speciation on the adsorption capacities measured for both adsorbates. In a first part, several characterization techniques (XRD, DRS-UV-Vis, TEM, etc.) were used to probe the state of silver in the calcined and non-calcined materials. It was found that the characteristics of silver species are strongly influenced by the thermal treatment, the presence or absence of exchange sites, and the stability of the supports. Silver agglomeration was enhanced after calcination at 500 °C especially for supports bearing no exchange sites (SBA-15) or no ordered pores (alumina and ceria). Then, the adsorption performances of the studied silver sorbents were discussed in relation with their physicochemical characteristics. After-test characterizations were useful to assess the proportion of silver species that have reacted with CH3I and I2 to yield AgI precipitates. Depending on the adsorbate, different trends were obtained. I2 adsorption/reaction with silver sites was found to be quantitative (I/Ag ≈1), whatever the silver speciation and dispersion on the support. By contrast, a high proportion of cationic silver species was found essential to increase CH3I adsorption (I/Ag about 0.6–0.7 against 0.2–0.3 for Ag agglomerated species).
- 1 January 2020
- Published by Elsevier in Chemical Engineering Journal
- Vol. 379
Effects of the cation and Si/Al ratio on CH3I adsorption by faujasite zeolites
- 1 January 2020
- Published by Elsevier in Chemical Engineering Journal
- Vol. 379
Effects of the cation and Si/Al ratio on CH3I adsorption by faujasite zeolites
- 5 March 2018
- Published by ASME International in Journal of Nuclear Engineering and Radiation Science
- Vol. 4 (2)
Research Works on Iodine and Ruthenium Behavior in Severe Accident Conditions
This paper deals with near past, ongoing, and planned R&D works on fission products (FPs) behavior in reactor cooling system (RCS), containment building and in filtered containment venting systems (FCVS) for severe accident (SA) conditions. All the researches are collaborative works; the overall objective is to develop confident models to be implemented in simulation software. After being initiated in 2004, researches on iodine transport through the RCS are still ongoing and for containment, the last advances are linked to the source term (ST) evaluation and mitigation (STEM) OECD/NEA project. The objective is to improve the evaluation of ST for a SA on a nuclear power plant and to reduce uncertainties on specific phenomena dealing with the chemistry of two major FPs: iodine and ruthenium. For ruthenium attention has been paid to study the amount and nature (gas/aerosol partition) of ruthenium species along the RCS. A follow-up, called STEM2, has started to reduce some remaining issues and be closer to reactor conditions. For FCVS works, the efficiencies for trapping iodine covering scrubbers and dry filters are examined to get a clear view of their abilities in SA conditions. Another part is focused on specific porous materials able to trap volatile iodine. Influence of zeolite materials parameters (nature of the counter-ions, structure, Si/Al ratio…) are tested as well as new kind of porous materials constituted by Metal organic Frameworks will also be looked at.
- 5 March 2018
- Published by ASME International in Journal of Nuclear Engineering and Radiation Science
- Vol. 4 (2)
Research Works on Iodine and Ruthenium Behavior in Severe Accident Conditions
This paper deals with near past, ongoing, and planned R&D works on fission products (FPs) behavior in reactor cooling system (RCS), containment building and in filtered containment venting systems (FCVS) for severe accident (SA) conditions. All the researches are collaborative works; the overall objective is to develop confident models to be implemented in simulation software. After being initiated in 2004, researches on iodine transport through the RCS are still ongoing and for containment, the last advances are linked to the source term (ST) evaluation and mitigation (STEM) OECD/NEA project. The objective is to improve the evaluation of ST for a SA on a nuclear power plant and to reduce uncertainties on specific phenomena dealing with the chemistry of two major FPs: iodine and ruthenium. For ruthenium attention has been paid to study the amount and nature (gas/aerosol partition) of ruthenium species along the RCS. A follow-up, called STEM2, has started to reduce some remaining issues and be closer to reactor conditions. For FCVS works, the efficiencies for trapping iodine covering scrubbers and dry filters are examined to get a clear view of their abilities in SA conditions. Another part is focused on specific porous materials able to trap volatile iodine. Influence of zeolite materials parameters (nature of the counter-ions, structure, Si/Al ratio…) are tested as well as new kind of porous materials constituted by Metal organic Frameworks will also be looked at.
- 20 July 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (30) , 25194-25203
Evaluation of Silver Zeolites Sorbents Toward Their Ability to Promote Stable CH3I Storage as AgI Precipitates
In this study, up to 13 different silver zeolites sorbents were prepared by repeated ion exchange from their parent structures (FAU X and Y, MOR, *BEA, MFI, FER), characterized, and evaluated for their ability to capture methyl iodide in the context of a nuclear severe accident. A novel methodology was implemented to establish structure–activity relationships between sorbent properties and iodine trapping stability. After saturation of the zeolite bed with CH3I during a dynamic breakthrough experiment at 100 °C, a two-step quantitative desorption method was elaborated with the aim to quantify separately the CH3I fractions trapped by physisorption, chemisorption, or reacted as AgI precipitates. Besides, an analysis of the mechanisms involved in CH3I sorption and decomposition processes was also carried out. Overall, Ag/Y zeolites displayed the highest fractions trapped as stable AgI precipitates, thanks to the presence of high amounts of dispersed silver species at accessible locations in the large supercages, and their low sodium content.
- 20 July 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (30) , 25194-25203
Evaluation of Silver Zeolites Sorbents Toward Their Ability to Promote Stable CH3I Storage as AgI Precipitates
In this study, up to 13 different silver zeolites sorbents were prepared by repeated ion exchange from their parent structures (FAU X and Y, MOR, *BEA, MFI, FER), characterized, and evaluated for their ability to capture methyl iodide in the context of a nuclear severe accident. A novel methodology was implemented to establish structure–activity relationships between sorbent properties and iodine trapping stability. After saturation of the zeolite bed with CH3I during a dynamic breakthrough experiment at 100 °C, a two-step quantitative desorption method was elaborated with the aim to quantify separately the CH3I fractions trapped by physisorption, chemisorption, or reacted as AgI precipitates. Besides, an analysis of the mechanisms involved in CH3I sorption and decomposition processes was also carried out. Overall, Ag/Y zeolites displayed the highest fractions trapped as stable AgI precipitates, thanks to the presence of high amounts of dispersed silver species at accessible locations in the large supercages, and their low sodium content.
- 4 November 2016
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 120 (45) , 25903-25914
Impact of the Zeolite Structure and Acidity on the Adsorption of Unburnt Hydrocarbons Relevant to Cold Start Conditions
- 4 November 2016
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 120 (45) , 25903-25914
Impact of the Zeolite Structure and Acidity on the Adsorption of Unburnt Hydrocarbons Relevant to Cold Start Conditions
- 7 April 2016
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 27 (10) , 1363-1375
Influence of modified mesoporous silica SBA‐15 on the flammability of intumescent high‐density polyethylene
This work aims to investigate the fire retardant properties of a novel type of high‐density polyethylene composites. Our intumescent system consists in using classical flame retardants such as ammonium polyphosphate, pentaerythritol in combination with porous mesostructured silica (SBA‐15) fillers. Prior to use, SBA‐15 was chemically modified using different organic and inorganic grafts in order to obtain some specific properties, such as an improved compatibility with the polymer, or different types of surface acidity in order to increase charring reactions. Limiting oxygen index, UL‐94, pyrolysis flow combustion calorimetry and thermogravimetric analysis were used to assess the burning behavior and thermal stability, respectively, of the processed composites. By keeping the total amount of additives always equal to 25 wt%, the better flammability characteristics were in general obtained at low SBA‐15 loadings (<2 wt%). X‐ray diffraction and Fourier transform infrared spectroscopy analyses of the residues showed that the formation of a barrier mainly constituted by crystalline silicon phosphates is probably a key to enhance the fire properties. Further slight improvements brought by the surface modification of SBA‐15 nanofillers are discussed according to type of incorporated particles. Copyright © 2016 John Wiley & Sons, Ltd.
- 7 April 2016
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 27 (10) , 1363-1375
Influence of modified mesoporous silica SBA‐15 on the flammability of intumescent high‐density polyethylene
This work aims to investigate the fire retardant properties of a novel type of high‐density polyethylene composites. Our intumescent system consists in using classical flame retardants such as ammonium polyphosphate, pentaerythritol in combination with porous mesostructured silica (SBA‐15) fillers. Prior to use, SBA‐15 was chemically modified using different organic and inorganic grafts in order to obtain some specific properties, such as an improved compatibility with the polymer, or different types of surface acidity in order to increase charring reactions. Limiting oxygen index, UL‐94, pyrolysis flow combustion calorimetry and thermogravimetric analysis were used to assess the burning behavior and thermal stability, respectively, of the processed composites. By keeping the total amount of additives always equal to 25 wt%, the better flammability characteristics were in general obtained at low SBA‐15 loadings (<2 wt%). X‐ray diffraction and Fourier transform infrared spectroscopy analyses of the residues showed that the formation of a barrier mainly constituted by crystalline silicon phosphates is probably a key to enhance the fire properties. Further slight improvements brought by the surface modification of SBA‐15 nanofillers are discussed according to type of incorporated particles. Copyright © 2016 John Wiley & Sons, Ltd.
- 13 October 2015
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 91 (9) , 2462-2473
Reactivity of ceria–zirconia catalysts for the catalytic wet peroxidative oxidation of azo dyes: reactivity and quantification of surface Ce(IV)‐peroxo species
BACKGROUND: Doping nanoceria with zirconia often leads to improved catalytic properties due to enhanced concentration of structural defects in the resulting materials. This study aims to identify the parameters and mechanisms governing the reactivity of well‐characterized commercial ceria–zirconia (CexZr1‐xO2) nanocatalysts with various Ce contents (x = 1, 0.80, 0.50, 0.21, 0) or surface area towards the degradation of Orange II dye in the presence of H2O2.RESULTS: Discoloration and mineralization kinetics were found to be strongly related both to the composition and surface area of the single or mixed oxides. Under standard conditions (23 °C, dark, stoichiometric concentration in H2O2), the best discoloration and mineralization performances were achieved for pure ceria (100% of color removal in 2 h and 65% mineralization in 8 h), but this arises mainly from its higher specific area by comparison with Zr‐doped materials.For the first time, the amount of CeIV(O2)2− surface species, intermediates in the production of hydroxyl radicals and generated from the reaction of H2O2 with Ce(III) sites, was quantitated using TPD‐MS in order to provide a rational basis to explain the catalytic performance.CONCLUSION: Doping ceria with Zr increases the surface density of defective Ce(III) sites that can be converted to CeIV(O2)2− species in the presence of H2O2, but other parameters, such as the specific surface area and surface Ce content of the catalysts, are also important. An in‐depth mechanism for the reaction of H2O2 on the ceria–zirconia surface is discussed based on the experimental results. © 2015 Society of Chemical Industry
- 13 October 2015
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 91 (9) , 2462-2473
Reactivity of ceria–zirconia catalysts for the catalytic wet peroxidative oxidation of azo dyes: reactivity and quantification of surface Ce(IV)‐peroxo species
BACKGROUND: Doping nanoceria with zirconia often leads to improved catalytic properties due to enhanced concentration of structural defects in the resulting materials. This study aims to identify the parameters and mechanisms governing the reactivity of well‐characterized commercial ceria–zirconia (CexZr1‐xO2) nanocatalysts with various Ce contents (x = 1, 0.80, 0.50, 0.21, 0) or surface area towards the degradation of Orange II dye in the presence of H2O2.RESULTS: Discoloration and mineralization kinetics were found to be strongly related both to the composition and surface area of the single or mixed oxides. Under standard conditions (23 °C, dark, stoichiometric concentration in H2O2), the best discoloration and mineralization performances were achieved for pure ceria (100% of color removal in 2 h and 65% mineralization in 8 h), but this arises mainly from its higher specific area by comparison with Zr‐doped materials.For the first time, the amount of CeIV(O2)2− surface species, intermediates in the production of hydroxyl radicals and generated from the reaction of H2O2 with Ce(III) sites, was quantitated using TPD‐MS in order to provide a rational basis to explain the catalytic performance.CONCLUSION: Doping ceria with Zr increases the surface density of defective Ce(III) sites that can be converted to CeIV(O2)2− species in the presence of H2O2, but other parameters, such as the specific surface area and surface Ce content of the catalysts, are also important. An in‐depth mechanism for the reaction of H2O2 on the ceria–zirconia surface is discussed based on the experimental results. © 2015 Society of Chemical Industry