Aqeel A. Qureshi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Aqeel A. Qureshi has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Waqas Mazhar
Department of Electrical and Computer Engineering, University of Saskatchewan, Saskatoon, Saskatchewan, Canada
4 shared publications David M. Klymyshyn
Univ Saskatchewan, Saskatoon, SK S7N 5A9, Canada
3 shared publicationsGarth Wells
Canadian Light Source Inc., Saskatoon, SK, Canada
2 shared publicationsMichael Jacobs
Canadian Light Source Inc., Saskatoon, SK, Canada
2 shared publicationsDavid Klymyshyn
University of Saskatchewan, Saskatoon, SK, Canada
1 shared publicationJurgen Mohr
Institute for Microstructure Technologies, Karlsruhe Institute of Technology Karlsruhe, Germany
1 shared publication
Latest Publications
- 11 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 18 (6) , 1109-1113
60 GHz Substrate Integrated Waveguide-Fed Monolithic Grid Dielectric Resonator Antenna Arrays
Artificial grid dielectric resonator antenna (GDRA) arrays integrated with longitudinal slot-fed substrate integrated waveguide networks are demonstrated at V-band for wideband and high-gain applications. The effective permittivity of a 500 μm thick, low-permittivity polymethyl methacrylate substrate is locally increased by a factor of 22.4 by embedding groups of micro-sized rectangular metal inclusions, each group functioning as antenna elements and collectively functioning as an antenna array. The monolithic GDRA array mitigates the problem of individual element misalignment over the feed slots while providing precise interelement spacing. GDRA prototypes with 4 × 4 and 8 × 8 array elements fabricated and tested at 60 GHz demonstrate a −10 dB impedance bandwidth of 10.4% and 12.0% with broadside peak realized gain of 15.2 and 19.4 dBi.
- 11 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 18 (6) , 1109-1113
60 GHz Substrate Integrated Waveguide-Fed Monolithic Grid Dielectric Resonator Antenna Arrays
Artificial grid dielectric resonator antenna (GDRA) arrays integrated with longitudinal slot-fed substrate integrated waveguide networks are demonstrated at V-band for wideband and high-gain applications. The effective permittivity of a 500 μm thick, low-permittivity polymethyl methacrylate substrate is locally increased by a factor of 22.4 by embedding groups of micro-sized rectangular metal inclusions, each group functioning as antenna elements and collectively functioning as an antenna array. The monolithic GDRA array mitigates the problem of individual element misalignment over the feed slots while providing precise interelement spacing. GDRA prototypes with 4 × 4 and 8 × 8 array elements fabricated and tested at 60 GHz demonstrate a −10 dB impedance bandwidth of 10.4% and 12.0% with broadside peak realized gain of 15.2 and 19.4 dBi.
- 26 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 67 (7) , 4406-4417
Low-Profile Artificial Grid Dielectric Resonator Antenna Arrays for mm-Wave Applications
Wideband artificial grid dielectric resonator antenna (GDRA) arrays at 32 GHz for mm-wave applications are presented. The antenna array is comprised of a GDRA layer and a substrate integrated waveguide feeding layer. The GDRA array layer is built by embedding small rectangular metal grid structures in low permittivity dielectric polymethyl methacrylate (PMMA) using deep-X-ray lithography (DXRL) and electroforming. The rectangular metallic inclusions significantly increase the effective permittivity of the base material up to 17 by creating high electric flux density regions inside. Low loss SIW feeding with longitudinal slots is utilized to excite the GDRA array layer. A 200.... thin perforated layer of PMMA is applied between the rectangular grid structures and the SIW feedlines to avoid shorting the metal inclusions to the excitation slots, while improving broadband energy coupling to the GDRA layer. The size of the single GDRA array element is only 2.7mm × 2.7mm × 0.5mm (0.29.o λ 0.29.o λ 0.05.o). Four element (1×4) and eight element (1×8) GDRA arrays have been fabricated and measured. A measured impedance bandwidth of 6 GHz with a broadside peak gain of 12 dBi and 76% measured radiation efficiency is obtained at 32 GHz for the 1×8 GDRA array.
- 26 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 67 (7) , 4406-4417
Low-Profile Artificial Grid Dielectric Resonator Antenna Arrays for mm-Wave Applications
Wideband artificial grid dielectric resonator antenna (GDRA) arrays at 32 GHz for mm-wave applications are presented. The antenna array is comprised of a GDRA layer and a substrate integrated waveguide feeding layer. The GDRA array layer is built by embedding small rectangular metal grid structures in low permittivity dielectric polymethyl methacrylate (PMMA) using deep-X-ray lithography (DXRL) and electroforming. The rectangular metallic inclusions significantly increase the effective permittivity of the base material up to 17 by creating high electric flux density regions inside. Low loss SIW feeding with longitudinal slots is utilized to excite the GDRA array layer. A 200.... thin perforated layer of PMMA is applied between the rectangular grid structures and the SIW feedlines to avoid shorting the metal inclusions to the excitation slots, while improving broadband energy coupling to the GDRA layer. The size of the single GDRA array element is only 2.7mm × 2.7mm × 0.5mm (0.29.o λ 0.29.o λ 0.05.o). Four element (1×4) and eight element (1×8) GDRA arrays have been fabricated and measured. A measured impedance bandwidth of 6 GHz with a broadside peak gain of 12 dBi and 76% measured radiation efficiency is obtained at 32 GHz for the 1×8 GDRA array.
- 6 April 2018
- Published by Springer Nature in Microsystem Technologies
- Vol. 24 (9) , 3893-3900
On the application of micro hot embossing for mass fabrication of template-based dielectric resonator antenna arrays
- 6 April 2018
- Published by Springer Nature in Microsystem Technologies
- Vol. 24 (9) , 3893-3900
On the application of micro hot embossing for mass fabrication of template-based dielectric resonator antenna arrays
- 11 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 65 (9) , 4576-4584
Template-Based Dielectric Resonator Antenna Arrays for Millimeter-Wave Applications
An approach suitable for millimeter-wave dielectric resonator antenna (DRA) arrays is presented. The methodology involves fabricating precise cavities in acrylic templates and filling them with composite dielectric materials to create a monolithic polymer-based DRA (PRA) array layer. The excitation feed lines are fabricated on a separate substrate layer and the two layers are aligned and bonded together to form the PRA antenna array module. The impact of the acrylic frame on the PRA performance is analyzed through simulations. A four-element array operating at 60 GHz is realized to demonstrate the approach. The performance is characterized through simulation and also experimentally verified. The array offers a wide 12% impedance bandwidth at 60 GHz and broadside radiation with 10.5-dBi realized gain and stable radiation patterns. The use of polymer-based materials provides opportunities for cost-effective volume fabrication using molding techniques.
- 11 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 65 (9) , 4576-4584
Template-Based Dielectric Resonator Antenna Arrays for Millimeter-Wave Applications
An approach suitable for millimeter-wave dielectric resonator antenna (DRA) arrays is presented. The methodology involves fabricating precise cavities in acrylic templates and filling them with composite dielectric materials to create a monolithic polymer-based DRA (PRA) array layer. The excitation feed lines are fabricated on a separate substrate layer and the two layers are aligned and bonded together to form the PRA antenna array module. The impact of the acrylic frame on the PRA performance is analyzed through simulations. A four-element array operating at 60 GHz is realized to demonstrate the approach. The performance is characterized through simulation and also experimentally verified. The array offers a wide 12% impedance bandwidth at 60 GHz and broadside radiation with 10.5-dBi realized gain and stable radiation patterns. The use of polymer-based materials provides opportunities for cost-effective volume fabrication using molding techniques.