Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zahra Lari has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A New Vegetation Segmentation Approach for Cropped Fields Based on Threshold Detection from Hue Histograms

    by Mohamed Hassanein, Zahra Lari, Naser El-Sheimy

    Over the last decade, the use of unmanned aerial vehicle (UAV) technology has evolved significantly in different applications as it provides a special platform capable of combining the benefits of terrestrial and aerial remote sensing. Therefore, such technology has been established as an important source of data collection for different precision agriculture (PA) applications such as crop health monitoring and weed management. Generally, these PA applications depend on performing a vegetation segmentation process as an initial step, which aims to detect the vegetation objects in collected agriculture fields’ images. The main result of the vegetation segmentation process is a binary image, where vegetations are presented in white color and the remaining objects are presented in black. Such process could easily be performed using different vegetation indexes derived from multispectral imagery. Recently, to expand the use of UAV imagery systems for PA applications, it was important to reduce the cost of such systems through using low-cost RGB cameras Thus, developing vegetation segmentation techniques for RGB images is a challenging problem. The proposed paper introduces a new vegetation segmentation methodology for low-cost UAV RGB images, which depends on using Hue color channel. The proposed methodology follows the assumption that the colors in any agriculture field image can be distributed into vegetation and non-vegetations colors. Therefore, four main steps are developed to detect five different threshold values using the hue histogram of the RGB image, these thresholds are capable to discriminate the dominant color, either vegetation or non-vegetation, within the agriculture field image. The achieved results for implementing the proposed methodology showed its ability to generate accurate and stable vegetation segmentation performance with mean accuracy equal to 87.29% and standard deviation as 12.5%.


  • Open Access

    A New Approach for Realistic 3D Reconstruction of Planar Surfaces from Laser Scanning Data and Imagery Collected Onboard Modern Low-Cost Aerial Mapping Systems

    by Zahra Lari, Naser El-Sheimy, Ayman Habib

    Over the past few years, accurate 3D surface reconstruction using remotely-sensed data has been recognized as a prerequisite for different mapping, modelling, and monitoring applications. To fulfill the needs of these applications, necessary data are generally collected using various digital imaging systems. Among them, laser scanners have been acknowledged as a fast, accurate, and flexible technology for the acquisition of high density 3D spatial data. Despite their quick accessibility, the acquired 3D data using these systems does not provide semantic information about the nature of scanned surfaces. Hence, reliable processing techniques are employed to extract the required information for 3D surface reconstruction. Moreover, the extracted information from laser scanning data cannot be effectively utilized due to the lack of descriptive details. In order to provide a more realistic and accurate perception of the scanned scenes using laser scanning systems, a new approach for 3D reconstruction of planar surfaces is introduced in this paper. This approach aims to improve the interpretability of the extracted planar surfaces from laser scanning data using spectral information from overlapping imagery collected onboard modern low-cost aerial mapping systems, which are widely adopted nowadays. In this approach, the scanned planar surfaces using laser scanning systems are initially extracted through a novel segmentation procedure, and then textured using the acquired overlapping imagery. The implemented texturing technique, which intends to overcome the computational inefficiency of the previously-developed 3D reconstruction techniques, is performed in three steps. In the first step, the visibility of the extracted planar surfaces from laser scanning data within the collected images is investigated and a list of appropriate images for texturing each surface is established. Successively, an occlusion detection procedure is carried out to identify the occluded parts of these surfaces in the field of view of captured images. In the second step, visible/non-occluded parts of the planar surfaces are decomposed into segments that will be textured using individual images. Finally, a rendering procedure is accomplished to texture these parts using available images. Experimental results from overlapping laser scanning data and imagery collected onboard aerial mapping systems verify the feasibility of the proposed approach for efficient realistic 3D surface reconstruction.


  • Open Access

    Design and Implementation of Foot-Mounted Inertial Sensor Based Wearable Electronic Device for Game Play Application

    by Qifan Zhou, Hai Zhang, Zahra Lari, Zhenbo Liu, Naser El-Sheimy

    Wearable electronic devices have experienced increasing development with the advances in the semiconductor industry and have received more attention during the last decades. This paper presents the development and implementation of a novel inertial sensor-based foot-mounted wearable electronic device for a brand new application: game playing. The main objective of the introduced system is to monitor and identify the human foot stepping direction in real time, and coordinate these motions to control the player operation in games. This proposed system extends the utilized field of currently available wearable devices and introduces a convenient and portable medium to perform exercise in a more compelling way in the near future. This paper provides an overview of the previously-developed system platforms, introduces the main idea behind this novel application, and describes the implemented human foot moving direction identification algorithm. Practical experiment results demonstrate that the proposed system is capable of recognizing five foot motions, jump, step left, step right, step forward, and step backward, and has achieved an over 97% accuracy performance for different users. The functionality of the system for real-time application has also been verified through the practical experiments.


  • Open Access

    A novel quality control procedure for the evaluation of laser scanning data segmentation

    by Z. Lari, K. Al-Durgham, A. Habib

    Over the past few years, laser scanning systems have been acknowledged as the leading tools for the collection of high density 3D point cloud over physical surfaces for many different applications. However, no interpretation and scene classification is performed during the acquisition of these datasets. Consequently, the collected data must be processed to extract the required information. The segmentation procedure is usually considered as the fundamental step in information extraction from laser scanning data. So far, various approaches have been developed for the segmentation of 3D laser scanning data. However, none of them is exempted from possible anomalies due to disregarding the internal characteristics of laser scanning data, improper selection of the segmentation thresholds, or other problems during the segmentation procedure. Therefore, quality control procedures are required to evaluate the segmentation outcome and report the frequency of instances of expected problems. A few quality control techniques have been proposed for the evaluation of laser scanning segmentation. These approaches usually require reference data and user intervention for the assessment of segmentation results. In order to resolve these problems, a new quality control procedure is introduced in this paper. This procedure makes hypotheses regarding potential problems that might take place in the segmentation process, detects instances of such problems, quantifies the frequency of these problems, and suggests possible actions to remedy them. The feasibility of the proposed approach is verified through quantitative evaluation of planar and linear/cylindrical segmentation outcome from two recently-developed parameter-domain and spatial-domain segmentation techniques.


  • Open Access

    Performance of parameter-domain and spatial-domain pole-like feature segmentation using single and multiple terrestrial laser scans

    by Z. Lari, K. Al-Durgham, A. Habib

    Terrestrial laser scanning (TLS) systems have been established as a leading tool for the acquisition of high density three-dimensional point clouds from physical objects. The collected point clouds by these systems can be utilized for a wide spectrum of object extraction, modelling, and monitoring applications. Pole-like features are among the most important objects that can be extracted from TLS data especially those acquired in urban areas and industrial sites. However, these features cannot be completely extracted and modelled using a single TLS scan due to significant local point density variations and occlusions caused by the other objects. Therefore, multiple TLS scans from different perspectives should be integrated through a registration procedure to provide a complete coverage of the pole-like features in a scene. To date, different segmentation approaches have been proposed for the extraction of pole-like features from either single or multiple-registered TLS scans. These approaches do not consider the internal characteristics of a TLS point cloud (local point density variations and noise level in data) and usually suffer from computational inefficiency. To overcome these problems, two recently-developed PCA-based parameter-domain and spatial-domain approaches for the segmentation of pole-like features are introduced, in this paper. Moreover, the performance of the proposed segmentation approaches for the extraction of pole-like features from a single or multiple-registered TLS scans is investigated in this paper. The alignment of the utilized TLS scans is implemented using an Iterative Closest Projected Point (ICPP) registration procedure. Qualitative and quantitative evaluation of the extracted pole-like features from single and multiple-registered TLS scans, using both of the proposed segmentation approaches, is conducted to verify the extraction of more complete pole-like features using multipleregistered TLS scans.


  • Open Access

    A novel hybrid approach for the extraction of linear/cylindrical features from laser scanning data

    by Z. Lari, A. Habib

    Keywords: Laser scanning, Point cloud, Feature extraction, Modelling, Segmentation, Performance However, the collected point cloud should undergo manipulation approaches to be utilized for diverse civil, industrial, and military applications. Different processing techniques have consequently been implemented for the extraction of low-level features from this data. Linear/cylindrical features are among the most important primitives that could be extracted from laser scanning data, especially those collected in industrial sites and urban areas. This paper presents a novel approach for the identification, parameterization, and segmentation of these features in a laser point cloud. In the first step of the proposed approach, the points which belong to linear/cylindrical features are detected and their appropriate representation models are chosen based on the principal component analysis of their local neighborhood. The approximate direction and position parameters of the identified linear/cylindrical features are then refined using an iterative line/cylinder fitting procedure. A parameter-domain segmentation method is finally applied to isolate the points which belong to individual linear/cylindrical features in direction and position attribute spaces, respectively. Experimental results from real datasets will demonstrate the feasibility of the proposed approach for the extraction of linear/cylindrical features from laser scanning data.