Leteng Lin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Leteng Lin has a total of 78 co-authors. Here are the top co-authors by number of shared publications:
Yuzhuo Wang
4 shared publications- Michael Strand
School of Engineering, Bioenergy Technology, Linnæus University, SE-351 95 Växjö, Sweden
3 shared publications Wan Zhang
3 shared publications- Wanja Thelin3 shared publications
Akmaral Karamergenova
2 shared publications- Cong Wang
School of Chemistry and Chemical Engineering, Shihezi University, Shihezi 832003, China
2 shared publications
Latest Publications
- Open Access
- 21 September 2026
- Published by Elsevier in SSRN Electronic Journal
Thermogravimetric Kinetic Analysis and Interpretable Machine Learning Modeling of Lignocellulosic Biomass Pyrolysis Behavior
Biomass pyrolysis represents a pivotal thermochemical pathway for renewable energy utilization and high-value carbon resource transformation. However, accurate prediction of pyrolysis behavior remains challenging due to its multi-stage and highly non-linear reaction characteristics. In this study, three typical lignocellulosic biomasses-safflower stalk (SS), walnut branch (WB), and walnut shell (WS)-were investigated via thermogravimetric analysis (TGA) at heating rates ranging from 5 to 40 °C/min. By integrating isoconversional kinetic methods (FWO, KAS, Starink, and Friedman) and the Master plot method with machine learning models-specifically Multiple Linear Regression (MLR) and Gradient Boosting Regression (GBR)-this work systematically evaluated pyrolysis characteristics, kinetic evolution, and predictive performance. The results indicate that WB exhibits the highest average apparent activation energy (Ea≈ 192 kJ/mol), followed by WS and SS, suggesting superior thermal stability and higher pyrolytic resistance in WB. Thermodynamic analysis reveals that the pyrolysis of all three feedstocks is endothermic and non-spontaneous. Compared to the MLR model (R2= 0.777), the GBR model demonstrates significantly superior predictive precision, achieving a coefficient of determination (R2) of 0.999 and a Root Mean Square Error (RMSE) of only 0.77%. The GBR model accurately reproduces TG curve variations across diverse operating conditions. Furthermore, Partial Dependence Plot (PDP) analysis identifies pyrolysis temperature as the dominant factor affecting the mass loss rate, while the heating rate primarily influences the process through the thermal lag effect. This research establishes an integrated framework combining kinetic analysis with interpretable artificial intelligence, providing a theoretical foundation and technical support for the optimization and regulation of biomass pyrolysis processes.
- 21 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessThermogravimetric Kinetic Analysis and Interpretable Machine Learning Modeling of Lignocellulosic Biomass Pyrolysis Behavior
Biomass pyrolysis represents a pivotal thermochemical pathway for renewable energy utilization and high-value carbon resource transformation. However, accurate prediction of pyrolysis behavior remains challenging due to its multi-stage and highly non-linear reaction characteristics. In this study, three typical lignocellulosic biomasses-safflower stalk (SS), walnut branch (WB), and walnut shell (WS)-were investigated via thermogravimetric analysis (TGA) at heating rates ranging from 5 to 40 °C/min. By integrating isoconversional kinetic methods (FWO, KAS, Starink, and Friedman) and the Master plot method with machine learning models-specifically Multiple Linear Regression (MLR) and Gradient Boosting Regression (GBR)-this work systematically evaluated pyrolysis characteristics, kinetic evolution, and predictive performance. The results indicate that WB exhibits the highest average apparent activation energy (Ea≈ 192 kJ/mol), followed by WS and SS, suggesting superior thermal stability and higher pyrolytic resistance in WB. Thermodynamic analysis reveals that the pyrolysis of all three feedstocks is endothermic and non-spontaneous. Compared to the MLR model (R2= 0.777), the GBR model demonstrates significantly superior predictive precision, achieving a coefficient of determination (R2) of 0.999 and a Root Mean Square Error (RMSE) of only 0.77%. The GBR model accurately reproduces TG curve variations across diverse operating conditions. Furthermore, Partial Dependence Plot (PDP) analysis identifies pyrolysis temperature as the dominant factor affecting the mass loss rate, while the heating rate primarily influences the process through the thermal lag effect. This research establishes an integrated framework combining kinetic analysis with interpretable artificial intelligence, providing a theoretical foundation and technical support for the optimization and regulation of biomass pyrolysis processes.
- 11 September 2026
- Published by Springer Nature in Wood Science and Technology
- Vol. 60 (6) , 86
Influence of cryogenic cooling on Wood Plastic Composite machining characteristics: a systematic analysis of process parameters and surface quality
- 11 September 2026
- Published by Springer Nature in Wood Science and Technology
- Vol. 60 (6) , 86
Influence of cryogenic cooling on Wood Plastic Composite machining characteristics: a systematic analysis of process parameters and surface quality
- Open Access
- 10 August 2026
- Published by Elsevier in Biomass and Bioenergy
- Vol. 217
Assessment of heat, electricity, and biochar polygeneration potential in an existing biomass-fired moving grate boiler used for district heating
- 10 August 2026
- Published by Elsevier in Biomass and Bioenergy
- Vol. 217
Open AccessAssessment of heat, electricity, and biochar polygeneration potential in an existing biomass-fired moving grate boiler used for district heating
- Open Access
Synergistic Effects of Ni-Co Alloy Active Sites and Promoter Modification on Nickel-Based Catalysts for Enhanced Performance in Dry Reforming Reactions
Dry reforming of methane (DRM) enables the simultaneous conversion of CH4 and CO2, yet rapid coking severely restricts the stability of Ni-based catalysts. In this study, Co was incorporated into Ce-, La-, and Zr-promoted Ni catalysts to construct Ni-Co alloy active sites, and their catalytic behavior was systematically evaluated. While single-promoter modification partially suppressed coke deposition at the expense of activity, Ni-Co alloy formation maintained high reforming performance and significantly enhanced stable catalytic performance within the 20 h evaluation period, with the Ce-promoted Ni-Co catalyst exhibiting the most durable anti-coking performance. CO2-TPD and coke characterization results indicate that promoter species enhance medium-strength basicity and oxygen mobility, thereby facilitating CO2 adsorption and accelerating the oxidation of surface coke intermediates; in particular, Ce supplies mobile active oxygen species through its oxygen storage-release capacity. DFT calculations further reveal that Co incorporation modulates the electronic structure of Ni sites, optimizing the balance between CH4 dissociation and CO2 activation and thus suppressing excessive methane cracking. These findings elucidate the synergistic effect of Ni-Co alloying and promoter modification in DRM and provide mechanistic insight for the rational design of coke-resistant Ni-based catalysts.
Open AccessSynergistic Effects of Ni-Co Alloy Active Sites and Promoter Modification on Nickel-Based Catalysts for Enhanced Performance in Dry Reforming Reactions
Dry reforming of methane (DRM) enables the simultaneous conversion of CH4 and CO2, yet rapid coking severely restricts the stability of Ni-based catalysts. In this study, Co was incorporated into Ce-, La-, and Zr-promoted Ni catalysts to construct Ni-Co alloy active sites, and their catalytic behavior was systematically evaluated. While single-promoter modification partially suppressed coke deposition at the expense of activity, Ni-Co alloy formation maintained high reforming performance and significantly enhanced stable catalytic performance within the 20 h evaluation period, with the Ce-promoted Ni-Co catalyst exhibiting the most durable anti-coking performance. CO2-TPD and coke characterization results indicate that promoter species enhance medium-strength basicity and oxygen mobility, thereby facilitating CO2 adsorption and accelerating the oxidation of surface coke intermediates; in particular, Ce supplies mobile active oxygen species through its oxygen storage-release capacity. DFT calculations further reveal that Co incorporation modulates the electronic structure of Ni sites, optimizing the balance between CH4 dissociation and CO2 activation and thus suppressing excessive methane cracking. These findings elucidate the synergistic effect of Ni-Co alloying and promoter modification in DRM and provide mechanistic insight for the rational design of coke-resistant Ni-based catalysts.
- Open Access
Early-Stage Investigation of Potential Phosphorus Recovery Pathway from Dredged Sediments: Case of Malmfjärden Bay, Kalmar
Metal and nutrients can be extracted and recovered from sediments for beneficial use. The aim of the current study is to extract phosphorus (P) from dredged sediments from Malmfjärden bay through chemical extraction, targeting the determination of the best conditions to extract P from the studied sediments with minimal contamination from metals. The chemicals used for the extractions include citric acid (C6H8O7), sulphuric acid (H2SO4), sodium hydroxide (NaOH) and ethylenediaminetetraacetic acid (EDTA) at 0.01 M or 0.1 M. The acids were at pH 5, and NaOH at pH 12. The pH was also varied for 0.01 M EDTA at pH 2, and 0.1 M H2SO4 at pH 1. A single extraction was carried out with each reagent at the varying concentrations and pH. One test had a sequential two-step extraction of EDTA as the first step, followed by H2SO4 as the second step. The elements were analysed using inductively coupled plasma sector field mass spectrometry (ICP-SFMS). The results showed that the extraction efficiencies were significantly higher at 0.1 M than 0.01 M of the reagents, as well as at more acidic conditions for the reagents with a varied pH, in most cases. H2SO4 at pH 1 extracted the most P (46.4%), together with most of the other elements. EDTA also exhibited a high extraction efficiency for the elements and can be used as a pre-step to remove metal before extraction with H2SO4. Alternatively, although it had lower P extraction efficiencies, NaOH can be used as the extractant, since it extracted less of the other elements. The P/metal extraction ratios further indicated that NaOH achieved high selectivity, as well as the second step sequential extraction H2SO4. Hence, the recovered P will be less contaminated. P extraction from sediments can indeed become one way of recovering the finite element, which would otherwise be normally lost as waste with the sediments.
Open AccessEarly-Stage Investigation of Potential Phosphorus Recovery Pathway from Dredged Sediments: Case of Malmfjärden Bay, Kalmar
Metal and nutrients can be extracted and recovered from sediments for beneficial use. The aim of the current study is to extract phosphorus (P) from dredged sediments from Malmfjärden bay through chemical extraction, targeting the determination of the best conditions to extract P from the studied sediments with minimal contamination from metals. The chemicals used for the extractions include citric acid (C6H8O7), sulphuric acid (H2SO4), sodium hydroxide (NaOH) and ethylenediaminetetraacetic acid (EDTA) at 0.01 M or 0.1 M. The acids were at pH 5, and NaOH at pH 12. The pH was also varied for 0.01 M EDTA at pH 2, and 0.1 M H2SO4 at pH 1. A single extraction was carried out with each reagent at the varying concentrations and pH. One test had a sequential two-step extraction of EDTA as the first step, followed by H2SO4 as the second step. The elements were analysed using inductively coupled plasma sector field mass spectrometry (ICP-SFMS). The results showed that the extraction efficiencies were significantly higher at 0.1 M than 0.01 M of the reagents, as well as at more acidic conditions for the reagents with a varied pH, in most cases. H2SO4 at pH 1 extracted the most P (46.4%), together with most of the other elements. EDTA also exhibited a high extraction efficiency for the elements and can be used as a pre-step to remove metal before extraction with H2SO4. Alternatively, although it had lower P extraction efficiencies, NaOH can be used as the extractant, since it extracted less of the other elements. The P/metal extraction ratios further indicated that NaOH achieved high selectivity, as well as the second step sequential extraction H2SO4. Hence, the recovered P will be less contaminated. P extraction from sediments can indeed become one way of recovering the finite element, which would otherwise be normally lost as waste with the sediments.
- 14 January 2026
- Published by Springer Nature in Catalysis Letters
- Vol. 156 (2) , 51
Optimizing Ce-La-Co Synergy in Ni/MgO-MgAl2O4 Catalysts for Efficient CH4-CO2 Dry Reforming with Improved Stability and Coke Resistance
- 14 January 2026
- Published by Springer Nature in Catalysis Letters
- Vol. 156 (2) , 51
Optimizing Ce-La-Co Synergy in Ni/MgO-MgAl2O4 Catalysts for Efficient CH4-CO2 Dry Reforming with Improved Stability and Coke Resistance
- Open Access
- 29 December 2025
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 14 (1)
Fabrication and functionalisation of poly(ε-caprolactone)-based materials for water treatment: A comprehensive review
- 29 December 2025
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 14 (1)
Open AccessFabrication and functionalisation of poly(ε-caprolactone)-based materials for water treatment: A comprehensive review
- Open Access
- 20 November 2025
- Published by Elsevier in Materials & Design
- Vol. 260
Integration of image processing and artificial neural networks (ANN) modeling for prediction of electrospun poly(ε-caprolactone) fibre diameters
- 20 November 2025
- Published by Elsevier in Materials & Design
- Vol. 260
Open AccessIntegration of image processing and artificial neural networks (ANN) modeling for prediction of electrospun poly(ε-caprolactone) fibre diameters
- Open Access
- 17 September 2025
- Published by Elsevier in Materials Today Communications
- Vol. 49
Fabrication and application of polycaprolactone-based composite scaffolds in tissue engineering: A review
- 17 September 2025
- Published by Elsevier in Materials Today Communications
- Vol. 49
Open AccessFabrication and application of polycaprolactone-based composite scaffolds in tissue engineering: A review