Finn Box
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Finn Box has a total of 72 co-authors. Here are the top co-authors by number of shared publications:
- Draga Pihler-Puzović
University of Manchester
6 shared publications - Anne Juel
University of Manchester
4 shared publications - Christopher Thorogood
University of Oxford Botanic Garden, Oxford, United Kingdom
3 shared publications - Gunnar G. Peng
University College London
3 shared publications - Tom Mullin
University of Oxford
3 shared publications - Alain Goriely
Mathematical Institute, University of Oxford, Oxford, UK
2 shared publications
Latest Publications
- Open Access
- 8 October 2026
- Published by Wiley in New Phytologist
Humidity‐driven shape morphing enhances fog harvesting in porous cactus spines
Summary: Cacti develop spines instead of conventional leaves, which often serve as mechanical defence against herbivores. However, some cactus species grow porous and flexible spines, suggesting fundamentally different functions. Here we demonstrate that the porous spines of Turbinicarpus alonsoi , a cactus native to central Mexico, function as hygro‐morphing fog harvesters. Using experiments, we show that the spines are highly hygroscopic and straighten when exposed to fog, leading to increased fog‐water collection rates. Numerical simulations confirm that straightening is driven by swelling‐induced pressure in the cell walls of the spines. Swelling results from capillary imbibition of fog water and predominantly generates expansion in the transverse plane, which causes the pre‐curved spines to straighten. Despite their porosity and hygroscopicity, the spines prevent direct absorption of fog water into the living cortex due to the presence of a suberin‐rich tissue layer that instead promotes surface runoff towards the roots. Our work suggests that hygro‐morphing emerges from distinct structural, biochemical and geometric adaptations of cactus spines and enables a fine modulation of the flow dynamics on the spine surface. The increasing plant water supply from fog by shape morphing provides a potential advantage for survival in a hot, semi‐arid region with frequent fog formation.
- 8 October 2026
- Published by Wiley in New Phytologist
Open AccessHumidity‐driven shape morphing enhances fog harvesting in porous cactus spines
Summary: Cacti develop spines instead of conventional leaves, which often serve as mechanical defence against herbivores. However, some cactus species grow porous and flexible spines, suggesting fundamentally different functions. Here we demonstrate that the porous spines of Turbinicarpus alonsoi , a cactus native to central Mexico, function as hygro‐morphing fog harvesters. Using experiments, we show that the spines are highly hygroscopic and straighten when exposed to fog, leading to increased fog‐water collection rates. Numerical simulations confirm that straightening is driven by swelling‐induced pressure in the cell walls of the spines. Swelling results from capillary imbibition of fog water and predominantly generates expansion in the transverse plane, which causes the pre‐curved spines to straighten. Despite their porosity and hygroscopicity, the spines prevent direct absorption of fog water into the living cortex due to the presence of a suberin‐rich tissue layer that instead promotes surface runoff towards the roots. Our work suggests that hygro‐morphing emerges from distinct structural, biochemical and geometric adaptations of cactus spines and enables a fine modulation of the flow dynamics on the spine surface. The increasing plant water supply from fog by shape morphing provides a potential advantage for survival in a hot, semi‐arid region with frequent fog formation.
- Open Access
- 31 March 2026
- Published by Springer Nature in Communications Physics
- Vol. 9 (1) , 114
Sequential buckling in fluid-filled cylindrical shells
From oil drums to flying rockets, cylindrical shells are valued for their load-carrying capacity. When sufficiently compressed, they buckle, with the phenomenon taking many forms, from periodic diamond-shaped buckles to localized elephant footing. The precise physical mechanisms of buckling are different, for example, in empty shells and shells with a solid core. However, despite the abundance of liquid-filled shells in industry and everyday life, their buckling is largely overlooked. Here, we compress beverage cans and identify a sequential buckling instability that localizes circumferential rings above a critical level of compression. Combining measurements of the anisotropic material properties of the shell with modelling based on the nonlinear Swift-Hohenberg equations, we demonstrate that fluid-filled shells can support a multiplicity of localized solutions, which are induced by the nonlinear hoop stress of the shell and sequentialize through homoclinic snaking. This establishes a rare link between idealized mathematical studies of pattern formation and physical realizations of spatially-localized buckling phenomena. These findings serve as a blueprint for exploring localized patterns induced by material nonlinearities, near-incompressibility and pressurization in other physical systems.
- 31 March 2026
- Published by Springer Nature in Communications Physics
- Vol. 9 (1) , 114
Open AccessSequential buckling in fluid-filled cylindrical shells
From oil drums to flying rockets, cylindrical shells are valued for their load-carrying capacity. When sufficiently compressed, they buckle, with the phenomenon taking many forms, from periodic diamond-shaped buckles to localized elephant footing. The precise physical mechanisms of buckling are different, for example, in empty shells and shells with a solid core. However, despite the abundance of liquid-filled shells in industry and everyday life, their buckling is largely overlooked. Here, we compress beverage cans and identify a sequential buckling instability that localizes circumferential rings above a critical level of compression. Combining measurements of the anisotropic material properties of the shell with modelling based on the nonlinear Swift-Hohenberg equations, we demonstrate that fluid-filled shells can support a multiplicity of localized solutions, which are induced by the nonlinear hoop stress of the shell and sequentialize through homoclinic snaking. This establishes a rare link between idealized mathematical studies of pattern formation and physical realizations of spatially-localized buckling phenomena. These findings serve as a blueprint for exploring localized patterns induced by material nonlinearities, near-incompressibility and pressurization in other physical systems.
- Open Access
- 23 October 2025
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 22 (1) , 44-55
Dynamics of evaporating, interconnected droplets
We consider two sessile droplets that are connected by a microchannel. As they evaporate, they can exchange fluid via a pumping flow. Depending on the droplet volumes and footprints, the flow may be either absent, unidirectional or reverse in time.
- 23 October 2025
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 22 (1) , 44-55
Open AccessDynamics of evaporating, interconnected droplets
We consider two sessile droplets that are connected by a microchannel. As they evaporate, they can exchange fluid via a pumping flow. Depending on the droplet volumes and footprints, the flow may be either absent, unidirectional or reverse in time.
- Open Access
Humidity-driven shape morphing enhances fog harvesting in porous cactus spines
Cacti develop spines instead of conventional leaves, which often serve as mechanical defence against herbivores and protection from excess sunlight. However, some cactus species grow porous and flexible spines, suggesting fundamentally different functions. Here we demonstrate that the porous spines of Turbinicarpus alonsoi , a cactus native to central Mexico, function as hygro-morphing fog harvesters. We discovered that the spines are highly hygroscopic and straighten when exposed to fog, leading to increased fog water collection rates. Experiments and numerical simulations confirm that straightening is driven by swelling-induced pressure in the cell walls of the spine tissue. Swelling results from capillary imbibition of fog water and predominantly generates expansion in the transverse plane, which causes the pre-curved spines to straighten. Despite their porosity and hygroscopicity, the spines prevent direct absorption of fog water into the living cortex due to the presence of a suberin-rich tissue layer at the spine base that instead promotes surface runoff towards the roots. Our work suggests that hygro-morphing emerges from distinct structural, biochemical and geometric adaptations of cactus spines, and enables a fine modulation of the flow dynamics on the surface of spines. The increasing plant water supply from fog by shape morphing provides a potential advantage for survival in a hot, semi-arid region with frequent fog formation. Significance statement: In many arid regions of the world, fog is a critical source of fresh water. Plants display striking ways to harvest this fog water. For cacti with porous spines, it has long been assumed that they collect fog water directly by capillary imbibition. However, we demonstrate that, in Turbinicarpus alonsoi , water-impermeable tissue at the spine base prevents direct transport of water into the living cortex. Instead, a dual process increases fog water collection: the curved spines initially imbibe fog water, which causes them to swell and straighten, and a thin liquid film then forms on the spine and runs off along the plant surface down to the roots. Hygro-morphing spines therefore enhance the capacity of cacti to collect fog water.
Open AccessHumidity-driven shape morphing enhances fog harvesting in porous cactus spines
Cacti develop spines instead of conventional leaves, which often serve as mechanical defence against herbivores and protection from excess sunlight. However, some cactus species grow porous and flexible spines, suggesting fundamentally different functions. Here we demonstrate that the porous spines of Turbinicarpus alonsoi , a cactus native to central Mexico, function as hygro-morphing fog harvesters. We discovered that the spines are highly hygroscopic and straighten when exposed to fog, leading to increased fog water collection rates. Experiments and numerical simulations confirm that straightening is driven by swelling-induced pressure in the cell walls of the spine tissue. Swelling results from capillary imbibition of fog water and predominantly generates expansion in the transverse plane, which causes the pre-curved spines to straighten. Despite their porosity and hygroscopicity, the spines prevent direct absorption of fog water into the living cortex due to the presence of a suberin-rich tissue layer at the spine base that instead promotes surface runoff towards the roots. Our work suggests that hygro-morphing emerges from distinct structural, biochemical and geometric adaptations of cactus spines, and enables a fine modulation of the flow dynamics on the surface of spines. The increasing plant water supply from fog by shape morphing provides a potential advantage for survival in a hot, semi-arid region with frequent fog formation. Significance statement: In many arid regions of the world, fog is a critical source of fresh water. Plants display striking ways to harvest this fog water. For cacti with porous spines, it has long been assumed that they collect fog water directly by capillary imbibition. However, we demonstrate that, in Turbinicarpus alonsoi , water-impermeable tissue at the spine base prevents direct transport of water into the living cortex. Instead, a dual process increases fog water collection: the curved spines initially imbibe fog water, which causes them to swell and straighten, and a thin liquid film then forms on the spine and runs off along the plant surface down to the roots. Hygro-morphing spines therefore enhance the capacity of cacti to collect fog water.
- Open Access
- 7 August 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1016, R6
Choking the flow in soft Hele-Shaw cells: the role of elastomer geometry
We investigate flow-induced choking in soft Hele-Shaw cells comprising a fluid-filled gap in between a rigid plate and a confined block of elastomer. Fluid injected from the centre of the circular rigid plate flows radially outwards, causing the elastomeric block to deform, before exiting through the cell rim. The pressure in the fluid deforms the elastomer, increasing the size of the gap near the inlet, and decreasing the gap near the cell rim, because of volume conservation of the solid. At a critical injection flow rate, the magnitude of the deformation becomes large enough that the flow is occluded entirely at the rim. Here, we explore the influence of elastomer geometry on flow-induced choking and, in particular, the case of a thick block with radius smaller than its depth. We show that choking can still occur with small-aspect-ratio elastomers, even though the confining influence of the back wall that bounds the elastomer becomes negligible; in this case, the deformation length scale is set by the radial size of the cell rather than the depth of the block. Additionally, we reveal a distinction between flow-induced choking in flow-rate-controlled flows and flow-rate-limiting behaviour in pressure-controlled flows.
- 7 August 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1016, R6
Open AccessChoking the flow in soft Hele-Shaw cells: the role of elastomer geometry
We investigate flow-induced choking in soft Hele-Shaw cells comprising a fluid-filled gap in between a rigid plate and a confined block of elastomer. Fluid injected from the centre of the circular rigid plate flows radially outwards, causing the elastomeric block to deform, before exiting through the cell rim. The pressure in the fluid deforms the elastomer, increasing the size of the gap near the inlet, and decreasing the gap near the cell rim, because of volume conservation of the solid. At a critical injection flow rate, the magnitude of the deformation becomes large enough that the flow is occluded entirely at the rim. Here, we explore the influence of elastomer geometry on flow-induced choking and, in particular, the case of a thick block with radius smaller than its depth. We show that choking can still occur with small-aspect-ratio elastomers, even though the confining influence of the back wall that bounds the elastomer becomes negligible; in this case, the deformation length scale is set by the radial size of the cell rather than the depth of the block. Additionally, we reveal a distinction between flow-induced choking in flow-rate-controlled flows and flow-rate-limiting behaviour in pressure-controlled flows.
- Open Access
- 2 July 2025
- Published by Springer Nature in The European Physical Journal E
- Vol. 48 (6-7) , 1-12
Droplet-on-demand using a positive pressure pulse
Droplet generation under steady conditions is a common microfluidic method for producing biphasic systems. However, this process works only over a limited range of imposed pressure: beyond a critical value, a stable liquid jet can instead form. Furthermore, for a given geometry, the pressure conditions set both the generation rate of droplets and their volume. Here, we report on-demand droplet production using a positive pressure pulse to the dispersed-phase inlet of a flow-focusing geometry. This strategy enables confined droplet generation within and beyond the pressure range observed under steady conditions, and decouples volume and production rate. In particular, elongated plugs not possible under steady conditions may be formed when the maximal pressure during the pulse reaches the jet regime. The measured volume of droplets-on-demand as well as the onset of droplet generation are both captured with a simple model that considers hydraulic resistances. This work provides a strategy and design rules for processes that require individual droplets or elongated plugs in a simple microfluidic chip design. Graphic
- 2 July 2025
- Published by Springer Nature in The European Physical Journal E
- Vol. 48 (6-7) , 1-12
Open AccessDroplet-on-demand using a positive pressure pulse
Droplet generation under steady conditions is a common microfluidic method for producing biphasic systems. However, this process works only over a limited range of imposed pressure: beyond a critical value, a stable liquid jet can instead form. Furthermore, for a given geometry, the pressure conditions set both the generation rate of droplets and their volume. Here, we report on-demand droplet production using a positive pressure pulse to the dispersed-phase inlet of a flow-focusing geometry. This strategy enables confined droplet generation within and beyond the pressure range observed under steady conditions, and decouples volume and production rate. In particular, elongated plugs not possible under steady conditions may be formed when the maximal pressure during the pulse reaches the jet regime. The measured volume of droplets-on-demand as well as the onset of droplet generation are both captured with a simple model that considers hydraulic resistances. This work provides a strategy and design rules for processes that require individual droplets or elongated plugs in a simple microfluidic chip design. Graphic
- Open Access
- 25 November 2024
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 121 (50)
Uncovering the mechanical secrets of the squirting cucumber
Rapid movement is rare in the plant kingdom, but a prerequisite for ballistic seed dispersal. A particularly dramatic example of rapid motion in plants is the squirting cucumber ( Ecballium elaterium ) which launches its seeds explosively via a high-pressure jet. Despite intriguing scientists for centuries, the exact mechanism of seed dispersal and its effect on subsequent generations remain poorly understood. Here, through a combination of experimentation, high-speed videography, quantitative image analysis, and mathematical modeling, we develop a full mechanical description of the process. We quantify the turgor pressure driving ballistic ejection, and uncover key mechanical interactions between the fruit and stem both prior to and during seed ejection, including the unique feature that fluid is redistributed from fruit to stem prior to ejection, a developmental event that goes against the paradigm of rapid seed ejection but which is of key importance in successful dispersal for Ecballium . Combining modeling elements, we quantify and simulate the ballistic trajectories of seeds, which are dispersed over distances greater than 2,000 times their length. We demonstrate how together these mechanical features contribute to a nearly uniform distribution of seeds away from the parent plant. Parametric variation of key developmental events in the modeling framework indicates how a suite of adaptive features in combination drives the spatial distribution of offspring over consecutive generations, and suggests that ballistic seed dispersal has a stabilizing effect on population dynamics by reducing intraspecific competition.
- 25 November 2024
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 121 (50)
Open AccessUncovering the mechanical secrets of the squirting cucumber
Rapid movement is rare in the plant kingdom, but a prerequisite for ballistic seed dispersal. A particularly dramatic example of rapid motion in plants is the squirting cucumber ( Ecballium elaterium ) which launches its seeds explosively via a high-pressure jet. Despite intriguing scientists for centuries, the exact mechanism of seed dispersal and its effect on subsequent generations remain poorly understood. Here, through a combination of experimentation, high-speed videography, quantitative image analysis, and mathematical modeling, we develop a full mechanical description of the process. We quantify the turgor pressure driving ballistic ejection, and uncover key mechanical interactions between the fruit and stem both prior to and during seed ejection, including the unique feature that fluid is redistributed from fruit to stem prior to ejection, a developmental event that goes against the paradigm of rapid seed ejection but which is of key importance in successful dispersal for Ecballium . Combining modeling elements, we quantify and simulate the ballistic trajectories of seeds, which are dispersed over distances greater than 2,000 times their length. We demonstrate how together these mechanical features contribute to a nearly uniform distribution of seeds away from the parent plant. Parametric variation of key developmental events in the modeling framework indicates how a suite of adaptive features in combination drives the spatial distribution of offspring over consecutive generations, and suggests that ballistic seed dispersal has a stabilizing effect on population dynamics by reducing intraspecific competition.
- Open Access
Swelling and evaporation determine surface morphology of grafted hydrogel thin films
We experimentally study the formation of surface patterns in grafted hydrogel films of nanometer-to-micrometer thicknesses during imbibition-driven swelling followed by evaporation-driven shrinking. Creases are known to form at the hydrogel surface during swelling; the wavelength of the creasing pattern is proportional to the initial thickness of the hydrogel film with a logarithmic correction that depends on microscopic properties of the hydrogel. We find that, although the characteristic wavelength of the pattern is determined during swelling, the surface morphology can be significantly influenced by evaporation-induced shrinking. We observe that the elastocapillary length based on swollen mechanical properties gives a threshold thickness for a surface pattern formation, and consequently an important change in morphology.
Open AccessSwelling and evaporation determine surface morphology of grafted hydrogel thin films
We experimentally study the formation of surface patterns in grafted hydrogel films of nanometer-to-micrometer thicknesses during imbibition-driven swelling followed by evaporation-driven shrinking. Creases are known to form at the hydrogel surface during swelling; the wavelength of the creasing pattern is proportional to the initial thickness of the hydrogel film with a logarithmic correction that depends on microscopic properties of the hydrogel. We find that, although the characteristic wavelength of the pattern is determined during swelling, the surface morphology can be significantly influenced by evaporation-induced shrinking. We observe that the elastocapillary length based on swollen mechanical properties gives a threshold thickness for a surface pattern formation, and consequently an important change in morphology.
- Open Access
- 16 July 2024
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 8 (7) , 075605
Impacting metamaterials: The threshold for wave propagation in holey columns
We study the dynamic deformation of columns containing a periodic array of holes subject to impact loading. When compressed slowly, holey columns buckle beyond a critical compressive strain, and global pattern switching (from circular holes to orthogonal ellipses) occurs instantaneously. In contrast, the dynamic deformation of holey columns is driven by wave propagation; impact induces a compressive wave that buckles the ligaments surrounding a hole, nucleating a sequential pattern switching process. Subsequent void collapse, which ultimately leads to self-contact and topological modification, is driven by the moving boundary. Here, we identify the critical impact velocity above which the compression can no longer be considered quasistatic, and we show that it depends on system size. For dynamic deformations, we show that internal displacements are independent of impact velocity and propagate at the material sound speed, whereas the topological transition wave propagates at a speed that depends on the impact velocity. Published by the American Physical Society 2024
- 16 July 2024
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 8 (7) , 075605
Open AccessImpacting metamaterials: The threshold for wave propagation in holey columns
We study the dynamic deformation of columns containing a periodic array of holes subject to impact loading. When compressed slowly, holey columns buckle beyond a critical compressive strain, and global pattern switching (from circular holes to orthogonal ellipses) occurs instantaneously. In contrast, the dynamic deformation of holey columns is driven by wave propagation; impact induces a compressive wave that buckles the ligaments surrounding a hole, nucleating a sequential pattern switching process. Subsequent void collapse, which ultimately leads to self-contact and topological modification, is driven by the moving boundary. Here, we identify the critical impact velocity above which the compression can no longer be considered quasistatic, and we show that it depends on system size. For dynamic deformations, we show that internal displacements are independent of impact velocity and propagate at the material sound speed, whereas the topological transition wave propagates at a speed that depends on the impact velocity. Published by the American Physical Society 2024
- Open Access
- 5 September 2023
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 8 (9) , 094001
Propagation of air fingers into an elastorigid Y-bifurcation
We study experimentally the propagation of an air finger through the Y-bifurcation of an elastic, liquid-filled Hele-Shaw channel as a benchtop model of airway reopening. With channel compliance provided by an elastic upper boundary, we can impose collapsed channel configurations into which we inject air with constant volumetric flow rate. We typically observe steady finger propagation in the main channel, which is lost ahead of the Y-bifurcation but subsequently recovered in the daughter channels. At low levels of initial collapse, steady finger shapes and bubble pressure in the daughter channels map onto those in the main channel. However, at higher levels of initial collapse where the elastic sheet almost touches the bottom boundary of the channel, experimentally indistinguishable fingers in the main channel can lead to multiple states of reopening of the daughter channels. The downstream distance at which steady propagation is recovered in the daughter channels also varies considerably with injection flow rate and initial collapse because of a transition in the mechanics regulating finger propagation. We find that the characteristic time and length scales of this recovery are largest in the regime where viscous and surface tension forces dominate finger propagation and that they decrease towards a constant plateau in the limit where elastic forces supersede viscous forces. Our findings suggest that practical networks are unlikely to comprise long-enough channels for steady-state propagation to be recovered between bifurcations.
- 5 September 2023
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 8 (9) , 094001
Open AccessPropagation of air fingers into an elastorigid Y-bifurcation
We study experimentally the propagation of an air finger through the Y-bifurcation of an elastic, liquid-filled Hele-Shaw channel as a benchtop model of airway reopening. With channel compliance provided by an elastic upper boundary, we can impose collapsed channel configurations into which we inject air with constant volumetric flow rate. We typically observe steady finger propagation in the main channel, which is lost ahead of the Y-bifurcation but subsequently recovered in the daughter channels. At low levels of initial collapse, steady finger shapes and bubble pressure in the daughter channels map onto those in the main channel. However, at higher levels of initial collapse where the elastic sheet almost touches the bottom boundary of the channel, experimentally indistinguishable fingers in the main channel can lead to multiple states of reopening of the daughter channels. The downstream distance at which steady propagation is recovered in the daughter channels also varies considerably with injection flow rate and initial collapse because of a transition in the mechanics regulating finger propagation. We find that the characteristic time and length scales of this recovery are largest in the regime where viscous and surface tension forces dominate finger propagation and that they decrease towards a constant plateau in the limit where elastic forces supersede viscous forces. Our findings suggest that practical networks are unlikely to comprise long-enough channels for steady-state propagation to be recovered between bifurcations.