Maryam Ranjbar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Maryam Ranjbar has a total of 69 co-authors. Here are the top co-authors by number of shared publications:
Abolghasem Moghimi
Tehran / Iran, Department of Chemistry, University of Imam Hossein
5 shared publicationsHossein Aghabozorg
Department of Chemistry, Teacher Training University
5 shared publicationsH. Aghabozorg
Department of Chemistry, Teacher Training University, P.O. Box 15614 Tehran, Iran
4 shared publicationsMostafa Yousefi
Iranian Research Organization for Science and Technology (IROST)
4 shared publicationsA. Moghimi
University of Imam Hossein, Department of Chemistry, Tehran, Iran
3 shared publications- Ardeshir Shokrollahi
Chemistry Department, Yasouj University, 75918-74831, Yasouj, Iran
3 shared publications
Latest Publications
- Open Access
- 10 May 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-15
Enhanced adsorption and removal of Cd(II) from aqueous solution by amino-functionalized ZIF-8
Zeolite imidazolate framework-8 (ZIF-8), which is a special subgroup of metal–organic frameworks (MOFs), was synthesized and modified by ethylenediamine (ZIF-8-EDA) to prepare an efficient adsorbent for the high sorption of Cd2+ions from solution. The synthesized and modified ZIF-8 (ZIF-8-EDA) were characterized by X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, Brunauer–Emmett–Teller (BET), field emission scanning electron microscopy (FE-SEM) with energy dispersive spectroscopy (EDS), and transmission electron microscopy (TEM) analysis. The optimum conditions for dosage of adsorbent, initial ion concentration, pH, and contact time were 0.05 g/l, 50 mg/l, 6, and 60 min, respectively, for cadmium ion sorption from aqueous solutions with a removal efficiency of 89.7% for ZIF-8 and 93.5% for ZIF-8-EDA. Adsorption kinetics and equilibrium data were analyzed using the Langmuir and Freundlich equations. The Langmuir model fitted the equilibrium data better than the Freundlich model. According to the Langmuir equation, the maximum uptake for the cadmium ions was 294.11(mg/g). The calculated thermodynamic parameters (ΔG°, ΔH°, and ΔS°) indicated that the adsorption process was feasible, spontaneous, and endothermic at 20–50 °C. Based on the results, the amino functionalized ZIF-8 had improved adsorption performance due to the replacing of the starting linker with organic ligands that had effective functional groups, leading to chemical coordination due to the interaction of metal ions with the non-bonding pair of electrons on the N atoms of the amino functional group. The selectivity toward metal ion adsorption by ZIF-8-EDA was Cd2+ > Pb2+ > Ni2+.
- 10 May 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-15
Open AccessEnhanced adsorption and removal of Cd(II) from aqueous solution by amino-functionalized ZIF-8
Zeolite imidazolate framework-8 (ZIF-8), which is a special subgroup of metal–organic frameworks (MOFs), was synthesized and modified by ethylenediamine (ZIF-8-EDA) to prepare an efficient adsorbent for the high sorption of Cd2+ions from solution. The synthesized and modified ZIF-8 (ZIF-8-EDA) were characterized by X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, Brunauer–Emmett–Teller (BET), field emission scanning electron microscopy (FE-SEM) with energy dispersive spectroscopy (EDS), and transmission electron microscopy (TEM) analysis. The optimum conditions for dosage of adsorbent, initial ion concentration, pH, and contact time were 0.05 g/l, 50 mg/l, 6, and 60 min, respectively, for cadmium ion sorption from aqueous solutions with a removal efficiency of 89.7% for ZIF-8 and 93.5% for ZIF-8-EDA. Adsorption kinetics and equilibrium data were analyzed using the Langmuir and Freundlich equations. The Langmuir model fitted the equilibrium data better than the Freundlich model. According to the Langmuir equation, the maximum uptake for the cadmium ions was 294.11(mg/g). The calculated thermodynamic parameters (ΔG°, ΔH°, and ΔS°) indicated that the adsorption process was feasible, spontaneous, and endothermic at 20–50 °C. Based on the results, the amino functionalized ZIF-8 had improved adsorption performance due to the replacing of the starting linker with organic ligands that had effective functional groups, leading to chemical coordination due to the interaction of metal ions with the non-bonding pair of electrons on the N atoms of the amino functional group. The selectivity toward metal ion adsorption by ZIF-8-EDA was Cd2+ > Pb2+ > Ni2+.
- 31 October 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 49, 1469-1477
Crystal structures and thermal analyses of three new high-energy hydrazinium hydro-closo-borates
- 31 October 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 49, 1469-1477
Crystal structures and thermal analyses of three new high-energy hydrazinium hydro-closo-borates
- Open Access
- 27 June 2023
- Published by Metallurgy and Materials Science Research Institute, Chulalongkorn University in Journal of Metals, Materials and Minerals
- Vol. 33 (2) , 88-102
Synthesis, characterization, and application of ZIF-8 for removal of Cd, Ni, and Pb ions from aqueous solutions: Optimization of the process by Response Surface Methodology (RSM) based on Central Composite Design (CCD) technique
A Zeolitic imidazolate framework-8 (ZIF-8) was synthesized by the solvothermal method of zinc nitrate hexahydrate and 2-methylimidazole in DMF to remove Cd(II), Ni(II), and Pb(II) ions from aqueous solutions. The synthesized ZIF-8 was distinguished by XRD, FT-IR, BET, SEM, EDX, TEM methods. Several significant variables were optimized with response surface methodology (RSM) to obtain the highest removal of metal ions. According to the achieved results, the aqueous solution pH values of 6.5, 6.5, and 6.0, ZIF-8 dosages of 0.05, 0.06, and 0.05 g⸳L-1, and metal ions initial concentrations of 50, 60, and 60 mg⸳L-1 were chosen as the optimum amount of these variables for Cd(II), Ni(II), and Pb(II) ions adsorption from solution, respectively. The equilibrium time for metal ions adsorption was found at 50 min. Three-dimensional plots demonstrate relationships between the metal ion uptakes with the paired factors, which illustrate the behavior of the sorption system in a batch process. Based on the experimental results and model parameters, maximum adsorption efficiencies were achieved 89.76, 72 and 68.43% for Cd(II), Ni(II) and Pb(II), respectively. It can be suggested that the synthetized ZIF-8 has excellent potential as an effective adsorbent and used for heavy metal sorption from water environment.
- 27 June 2023
- Published by Metallurgy and Materials Science Research Institute, Chulalongkorn University in Journal of Metals, Materials and Minerals
- Vol. 33 (2) , 88-102
Open AccessSynthesis, characterization, and application of ZIF-8 for removal of Cd, Ni, and Pb ions from aqueous solutions: Optimization of the process by Response Surface Methodology (RSM) based on Central Composite Design (CCD) technique
A Zeolitic imidazolate framework-8 (ZIF-8) was synthesized by the solvothermal method of zinc nitrate hexahydrate and 2-methylimidazole in DMF to remove Cd(II), Ni(II), and Pb(II) ions from aqueous solutions. The synthesized ZIF-8 was distinguished by XRD, FT-IR, BET, SEM, EDX, TEM methods. Several significant variables were optimized with response surface methodology (RSM) to obtain the highest removal of metal ions. According to the achieved results, the aqueous solution pH values of 6.5, 6.5, and 6.0, ZIF-8 dosages of 0.05, 0.06, and 0.05 g⸳L-1, and metal ions initial concentrations of 50, 60, and 60 mg⸳L-1 were chosen as the optimum amount of these variables for Cd(II), Ni(II), and Pb(II) ions adsorption from solution, respectively. The equilibrium time for metal ions adsorption was found at 50 min. Three-dimensional plots demonstrate relationships between the metal ion uptakes with the paired factors, which illustrate the behavior of the sorption system in a batch process. Based on the experimental results and model parameters, maximum adsorption efficiencies were achieved 89.76, 72 and 68.43% for Cd(II), Ni(II) and Pb(II), respectively. It can be suggested that the synthetized ZIF-8 has excellent potential as an effective adsorbent and used for heavy metal sorption from water environment.
- Open Access
- 12 December 2022
- Published by MDPI AG in Fermentation
- Vol. 8 (12) , 730
Evaluation of the Thermal Processes on Changing the Phenotypic Characteristics of Escherichia coli Strains from Ice Cream Compared to Non-Pasteurized Milk
Escherichia coli (E. coli) is shocked by various temperature processes in milk, which forces the organism to make proteins as a result of changes in the synthesis of enzymes that might give the strain special characteristics. The purpose of this study was to investigate the effects of the heat shock factor on changing the results of biochemical and molecular tests among E. coli strains obtained from ice cream and non-pasteurized milk when compared to a reference strain from the American-type culture collection (ATCC) in order to determine the phenotypic variation caused by the temperature conditions of the manufacturing process. Furthermore, isolates with characteristics similar to E. coli were discovered, but they were not E. coli and caused some ambiguity. To test the E. coli contamination of traditional and industrial ice cream, 82 samples were chosen at random. SDS-PAGE and 16S rDNA sequencing were carried out, as well as phenotypic testing. Isolated strains did not exactly match the reference strain. The results of biochemical testing and protein analysis revealed that the isolates were diverse. Samples E. coli phenons were classified. In the electrophoresis, the ice cream strain had two protein bands in the 20.75 and 23.59 kDa ranges that were distinct from the reference strain. These isolates appear to experience alterations in enzyme characteristics and structural proteins as a result of being exposed to various temperature conditions, such as pasteurization and frigidity. When compared to the reference strain, the calculated similarity percentage of the elicited isolate varied from 60 to 70%. The electrophoretic patterns of E. coli isolated elicited from milk samples differed from E. coli isolated obtained from the ice cream. The distinctions were in the intensity or position of the bands. The results also revealed that when isolates are subjected to thermal stresses, they exhibit a pattern similar to that of ice cream isolates. These considerations are made because a change in protein composition might result in a change in biochemical features, resulting in uncertainty in its identification. Sequences revealed that the sequences were related to E. coli 16S rDNA, despite differences in phenotypic and electrophoretic features between the isolated bacteria and the reference strain E. coli ATCC 25922. Our findings revealed that 16S rDNA could potentially be used to instantly implement an appropriate preventive measure for the purpose of identifying this type of bacteria and avoid some ambiguity.
- 12 December 2022
- Published by MDPI AG in Fermentation
- Vol. 8 (12) , 730
Open AccessEvaluation of the Thermal Processes on Changing the Phenotypic Characteristics of Escherichia coli Strains from Ice Cream Compared to Non-Pasteurized Milk
Escherichia coli (E. coli) is shocked by various temperature processes in milk, which forces the organism to make proteins as a result of changes in the synthesis of enzymes that might give the strain special characteristics. The purpose of this study was to investigate the effects of the heat shock factor on changing the results of biochemical and molecular tests among E. coli strains obtained from ice cream and non-pasteurized milk when compared to a reference strain from the American-type culture collection (ATCC) in order to determine the phenotypic variation caused by the temperature conditions of the manufacturing process. Furthermore, isolates with characteristics similar to E. coli were discovered, but they were not E. coli and caused some ambiguity. To test the E. coli contamination of traditional and industrial ice cream, 82 samples were chosen at random. SDS-PAGE and 16S rDNA sequencing were carried out, as well as phenotypic testing. Isolated strains did not exactly match the reference strain. The results of biochemical testing and protein analysis revealed that the isolates were diverse. Samples E. coli phenons were classified. In the electrophoresis, the ice cream strain had two protein bands in the 20.75 and 23.59 kDa ranges that were distinct from the reference strain. These isolates appear to experience alterations in enzyme characteristics and structural proteins as a result of being exposed to various temperature conditions, such as pasteurization and frigidity. When compared to the reference strain, the calculated similarity percentage of the elicited isolate varied from 60 to 70%. The electrophoretic patterns of E. coli isolated elicited from milk samples differed from E. coli isolated obtained from the ice cream. The distinctions were in the intensity or position of the bands. The results also revealed that when isolates are subjected to thermal stresses, they exhibit a pattern similar to that of ice cream isolates. These considerations are made because a change in protein composition might result in a change in biochemical features, resulting in uncertainty in its identification. Sequences revealed that the sequences were related to E. coli 16S rDNA, despite differences in phenotypic and electrophoretic features between the isolated bacteria and the reference strain E. coli ATCC 25922. Our findings revealed that 16S rDNA could potentially be used to instantly implement an appropriate preventive measure for the purpose of identifying this type of bacteria and avoid some ambiguity.
- 9 May 2021
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 32 (11) , 15143-15150
Incorporating MOF-235 in lead iodide perovskite solar cell and investigating its efficiency and stability
- 9 May 2021
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 32 (11) , 15143-15150
Incorporating MOF-235 in lead iodide perovskite solar cell and investigating its efficiency and stability
- 4 July 2017
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions A: Science
- Vol. 42 (4) , 1969-1976
Study the Properties of Gadolinium-Doped Ceria Nano-Powders Synthesized Via Sol–Gel Method with New Precursors
- 4 July 2017
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions A: Science
- Vol. 42 (4) , 1969-1976
Study the Properties of Gadolinium-Doped Ceria Nano-Powders Synthesized Via Sol–Gel Method with New Precursors
- 16 September 2016
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 81 (1) , 236-246
Preparation and characterization of nanopowder nickel oxide/gadolinium-doped ceria via the sol-gel method by NiLH2 precursor
- 16 September 2016
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 81 (1) , 236-246
Preparation and characterization of nanopowder nickel oxide/gadolinium-doped ceria via the sol-gel method by NiLH2 precursor
- 1 May 2016
- Published by Elsevier in Journal of Photochemistry and Photobiology A: Chemistry
- Vol. 321, 110-121
Sonochemical synthesis and characterization of a Zn(II) supramolecule, bis(2,6 diaminopyridinium)bis(pyridine-2,6-dicarboxylato)zincate(II), as a novel precursor for the ZnO-based dye sensitizer solar cell
- 1 May 2016
- Published by Elsevier in Journal of Photochemistry and Photobiology A: Chemistry
- Vol. 321, 110-121
Sonochemical synthesis and characterization of a Zn(II) supramolecule, bis(2,6 diaminopyridinium)bis(pyridine-2,6-dicarboxylato)zincate(II), as a novel precursor for the ZnO-based dye sensitizer solar cell