Niklas Nilius
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Niklas Nilius has a total of 176 co-authors. Here are the top co-authors by number of shared publications:
Hans-Joachim Freund
Fritz-Haber-Institut der Max-Planck-Gesellschaft, Faradayweg 4-6, 14195 Berlin, Germany
30 shared publications- Jacek Goniakowski
CNRS, Sorbonne Université, Institut des NanoSciences de Paris, UMR 7588, 4 Place Jussieu, F-75005 Paris, France
17 shared publications - Gianfranco Pacchioni
Dipartimento Di Scienza dei Materiali Università Milano‐Bicocca Milano Italy
13 shared publications H.-J. Freund
Fritz-Haber-Institut der Max-Planck-Gesellschaft, Faradayweg 4-6, D-14195 Berlin, Germany
13 shared publications- Livia Giordano
Department of Materials Science, Università degli Studi di Milano-Bicocca, Via Cozzi 55, Milano 20125, Italy
13 shared publications Alexander Gloystein
Carl-von-Ossietzky University, Institute of Physics, D-26111 Oldenburg, Germany
10 shared publications
Latest Publications
- Open Access
- 29 September 2026
- Published by Wiley in Physica Status Solidi (b)
- Vol. 263 (10) , e70334
Preparation and Characterization of Gradient‐Index Copper‐Oxide Films
A copper oxide film with a gradual oxidation profile is produced by deposition and oxidation of Cu layers on glass at stepwise decreasing temperatures (650–450 K) and 25 mbar O 2 pressure. The oxidation process is monitored in situ by recording the integral and wavelength‐dependent optical transmission and ex situ by scanning transmission electron microscopy (STEM). While two oxidation steps are revealed above 550 K, Cu → Cu 2 O resulting in a rising transmission and Cu 2 O → CuO causing the transmission to decrease, only the Cu → Cu 2 O conversion takes place at 450 K. The Cu oxidation state can thus be controlled by the reaction temperature and a graded bandgap oxide can be produced. The film configuration is determined by modeling the measured transmission response with the transfer‐matrix and the Bruggeman formalisms. The fitting reveals a layered oxide composition, evolving from Cu 2 O at the surface to CuO at the interface, in good agreement with the STEM results. Our study thus demonstrates that the optical properties of CuO x films can be tuned via the oxidation parameters, opening a route to fabricate graded bandgap materials for photovoltaics and gradient‐refractive‐index (GRIN) optics.
- 29 September 2026
- Published by Wiley in Physica Status Solidi (b)
- Vol. 263 (10) , e70334
Open AccessPreparation and Characterization of Gradient‐Index Copper‐Oxide Films
A copper oxide film with a gradual oxidation profile is produced by deposition and oxidation of Cu layers on glass at stepwise decreasing temperatures (650–450 K) and 25 mbar O 2 pressure. The oxidation process is monitored in situ by recording the integral and wavelength‐dependent optical transmission and ex situ by scanning transmission electron microscopy (STEM). While two oxidation steps are revealed above 550 K, Cu → Cu 2 O resulting in a rising transmission and Cu 2 O → CuO causing the transmission to decrease, only the Cu → Cu 2 O conversion takes place at 450 K. The Cu oxidation state can thus be controlled by the reaction temperature and a graded bandgap oxide can be produced. The film configuration is determined by modeling the measured transmission response with the transfer‐matrix and the Bruggeman formalisms. The fitting reveals a layered oxide composition, evolving from Cu 2 O at the surface to CuO at the interface, in good agreement with the STEM results. Our study thus demonstrates that the optical properties of CuO x films can be tuned via the oxidation parameters, opening a route to fabricate graded bandgap materials for photovoltaics and gradient‐refractive‐index (GRIN) optics.
- 11 September 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (38) , 13301-13310
Competition between Structural Phases in Mixed Cr/Fe Oxide Films on Pt(111): How Dimensionality Governs the Stability of Oxide Alloys
Low-temperature scanning tunneling microscopy (STM), combined with density functional theory (DFT), is employed to probe the atomic-scale mixing of Cr and Fe into ultrathin oxide films on Pt(111). The CrOx and FeOx parent bi-stacks are first identified via their specific (2×2) and (1×1) STM signatures, respectively. In Cr-rich mixed oxides, a (2×2) honeycomb surface remains the primary structural motif, although the presence of defects and ad-structures indicates partial Fe incorporation into the topmost oxide plane. With increasing Fe concentration, regions with characteristic (1×1) termination emerge, consistent with the formation of close-packed FeO ad-layers located above a Cr-rich oxide base. DFT calculations reveal two competing oxide phases under these preparation conditions. Whereas oxygen-rich, spinel-type bi-stacks dominate at Cr-rich compositions, Fe-rich films favor an oxygen-lean h-LuMnO3-type structure, not observed in bulk Cr/Fe oxides. The interplay between the two mixed oxide phases is governed by the availability of tetrahedrally versus octahedrally coordinated cation sites, as favored by the Fe and Cr ions, respectively. The structure of such low-dimensional oxide systems can thus be controlled by the Cr/Fe ratio and oxygen conditions during preparation, paving the way for phase engineering of oxide heterostructures and adaptive interfaces with potential for multifunctional, catalytic, and sensing applications.
- 11 September 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (38) , 13301-13310
Competition between Structural Phases in Mixed Cr/Fe Oxide Films on Pt(111): How Dimensionality Governs the Stability of Oxide Alloys
Low-temperature scanning tunneling microscopy (STM), combined with density functional theory (DFT), is employed to probe the atomic-scale mixing of Cr and Fe into ultrathin oxide films on Pt(111). The CrOx and FeOx parent bi-stacks are first identified via their specific (2×2) and (1×1) STM signatures, respectively. In Cr-rich mixed oxides, a (2×2) honeycomb surface remains the primary structural motif, although the presence of defects and ad-structures indicates partial Fe incorporation into the topmost oxide plane. With increasing Fe concentration, regions with characteristic (1×1) termination emerge, consistent with the formation of close-packed FeO ad-layers located above a Cr-rich oxide base. DFT calculations reveal two competing oxide phases under these preparation conditions. Whereas oxygen-rich, spinel-type bi-stacks dominate at Cr-rich compositions, Fe-rich films favor an oxygen-lean h-LuMnO3-type structure, not observed in bulk Cr/Fe oxides. The interplay between the two mixed oxide phases is governed by the availability of tetrahedrally versus octahedrally coordinated cation sites, as favored by the Fe and Cr ions, respectively. The structure of such low-dimensional oxide systems can thus be controlled by the Cr/Fe ratio and oxygen conditions during preparation, paving the way for phase engineering of oxide heterostructures and adaptive interfaces with potential for multifunctional, catalytic, and sensing applications.
- Open Access
- 29 June 2026
- Published by Springer Nature in Topics in Catalysis
- p. 1-9
Titanium-Doped Cu2O Thin Films: Oxide Alloying Versus Phase Separation
Reactive Ti/Cu co-deposition onto Pt(111) in 50 mbar O 2 is investigated with X-ray photoelectron spectroscopy (XPS), electron diffraction (LEED) and low-temperature scanning tunneling microscopy (STM). While as-grown films develop homogenous Ti/Cu/O mixtures without crystalline order, already moderate oxygen annealing at 560 K initiates a massive phase separation into surface TiO 2 and interface Cu 2 O layers. At low Ti content, Ti decorates the nano-pyramidal reconstruction of the Cu 2 O(111) surface, replacing the regular Cu 4 O pyramids with TiO x units. At higher concentration, raft-like TiO 2 crystallites, exposing a (4 × 2) added-row reconstruction, grow on top of the Cu 2 O films. A nearly equal Ti/Cu ratio triggers the formation of a pn -junction, made of n-type TiO 2 at the surface and p-type Cu 2 O at the interface. Our work rationalizes the absence of Ti/Cu mixed oxide phases and discusses the driving forces for phase separation into the binary oxide parents.
- 29 June 2026
- Published by Springer Nature in Topics in Catalysis
- p. 1-9
Open AccessTitanium-Doped Cu2O Thin Films: Oxide Alloying Versus Phase Separation
Reactive Ti/Cu co-deposition onto Pt(111) in 50 mbar O 2 is investigated with X-ray photoelectron spectroscopy (XPS), electron diffraction (LEED) and low-temperature scanning tunneling microscopy (STM). While as-grown films develop homogenous Ti/Cu/O mixtures without crystalline order, already moderate oxygen annealing at 560 K initiates a massive phase separation into surface TiO 2 and interface Cu 2 O layers. At low Ti content, Ti decorates the nano-pyramidal reconstruction of the Cu 2 O(111) surface, replacing the regular Cu 4 O pyramids with TiO x units. At higher concentration, raft-like TiO 2 crystallites, exposing a (4 × 2) added-row reconstruction, grow on top of the Cu 2 O films. A nearly equal Ti/Cu ratio triggers the formation of a pn -junction, made of n-type TiO 2 at the surface and p-type Cu 2 O at the interface. Our work rationalizes the absence of Ti/Cu mixed oxide phases and discusses the driving forces for phase separation into the binary oxide parents.
- Open Access
- 13 March 2026
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 38 (10) , 103002
Nanoscale doping and mixing of binary oxide thin films: concepts, properties and applications
Oxide thin films are nowadays recognized as essential ingredients in many areas of modern technology. While binary oxides already exhibit a rich variety of structural, electronic, magnetic, and chemical properties, doping or mixing them with foreign cations allows further engineering to meet specific application requests. In this review, we first outline the fabrication and characterization techniques used to study mixed oxide thin films, both from an experimental and a theoretical viewpoint. We then provide a detailed overview of recent advances in the field, drawing on both experimental findings and theoretical insights. This section which is organized according to the dominant cation in doped films, focuses on systems with distinct thin film characteristics compared to the bulk, such as thickness-dependent properties and surface/interface effects. The subsequent section then explores the fundamental principles that govern cation mixing, addressing both solid solutions and ordered compounds within a unified framework. While these principles are relatively well understood in bulk materials, additional complexity exists in thin films due to finite size effects, as well as the interaction with the surrounding atmosphere (notably oxygen) and/or the substrate which supports the thin films. In several cases, these factors are shown to dramatically alter the mixing behavior, affecting the phase diagrams, the stability and composition of ordered phases, among others. The final section adopts a transversal perspective, and summarizes the benefits of cation mixing in oxide thin films for engineering their structural, electronic, magnetic, and reactivity properties, and expanding their potential for a use in a broad range of technological applications.
- 13 March 2026
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 38 (10) , 103002
Open AccessNanoscale doping and mixing of binary oxide thin films: concepts, properties and applications
Oxide thin films are nowadays recognized as essential ingredients in many areas of modern technology. While binary oxides already exhibit a rich variety of structural, electronic, magnetic, and chemical properties, doping or mixing them with foreign cations allows further engineering to meet specific application requests. In this review, we first outline the fabrication and characterization techniques used to study mixed oxide thin films, both from an experimental and a theoretical viewpoint. We then provide a detailed overview of recent advances in the field, drawing on both experimental findings and theoretical insights. This section which is organized according to the dominant cation in doped films, focuses on systems with distinct thin film characteristics compared to the bulk, such as thickness-dependent properties and surface/interface effects. The subsequent section then explores the fundamental principles that govern cation mixing, addressing both solid solutions and ordered compounds within a unified framework. While these principles are relatively well understood in bulk materials, additional complexity exists in thin films due to finite size effects, as well as the interaction with the surrounding atmosphere (notably oxygen) and/or the substrate which supports the thin films. In several cases, these factors are shown to dramatically alter the mixing behavior, affecting the phase diagrams, the stability and composition of ordered phases, among others. The final section adopts a transversal perspective, and summarizes the benefits of cation mixing in oxide thin films for engineering their structural, electronic, magnetic, and reactivity properties, and expanding their potential for a use in a broad range of technological applications.
- Open Access
- 9 March 2026
- Published by IOP Publishing in 2D Materials
- Vol. 13 (2) , 025016
Optical properties of Fermi polarons in a GaInP/MoSe 2 monolayer heterostructure
Engineering optical properties, such as luminescence purity and charge transfer, is crucial for harnessing the application potential of atomically thin transition metal dichalcogenides (TMDCs). While electrostatic gating is widely applied to gain charge control in TMDC monolayers, charge transfer can also be engineered via coupling of TMDC monolayers to semiconductor III/V, organic, or van der Waals interfaces. This confers great advantages, such as ease in implementation and compatibility in device integration. Here, we shed light on the optical properties of many-particle complexes emerging at the GaInP/MoSe 2 interface as a highly relevant material combination to manipulate the optical properties of TMDCs in integrated photonic devices. Our study verifies its nature as a type II hetero-interface, which bears the feasibility to display disorder-free photoluminescence (PL). Through optical absorption measurements, we verify that the charged complexes acquire substantial oscillator strength. Furthermore, temperature-dependent PL, supported by a microscopic theory framework, evidences the suppression of the characteristic carrier recoil effect that was previously observed in the PL of trions in TMDCs. These phenomena allow us to identify the optical signatures at the TMDC-GaInP interface as Fermi polaron quasiparticle resonances, which are of high importance in researching Bose–Fermi mixtures in condensed matter systems.
- 9 March 2026
- Published by IOP Publishing in 2D Materials
- Vol. 13 (2) , 025016
Open AccessOptical properties of Fermi polarons in a GaInP/MoSe 2 monolayer heterostructure
Engineering optical properties, such as luminescence purity and charge transfer, is crucial for harnessing the application potential of atomically thin transition metal dichalcogenides (TMDCs). While electrostatic gating is widely applied to gain charge control in TMDC monolayers, charge transfer can also be engineered via coupling of TMDC monolayers to semiconductor III/V, organic, or van der Waals interfaces. This confers great advantages, such as ease in implementation and compatibility in device integration. Here, we shed light on the optical properties of many-particle complexes emerging at the GaInP/MoSe 2 interface as a highly relevant material combination to manipulate the optical properties of TMDCs in integrated photonic devices. Our study verifies its nature as a type II hetero-interface, which bears the feasibility to display disorder-free photoluminescence (PL). Through optical absorption measurements, we verify that the charged complexes acquire substantial oscillator strength. Furthermore, temperature-dependent PL, supported by a microscopic theory framework, evidences the suppression of the characteristic carrier recoil effect that was previously observed in the PL of trions in TMDCs. These phenomena allow us to identify the optical signatures at the TMDC-GaInP interface as Fermi polaron quasiparticle resonances, which are of high importance in researching Bose–Fermi mixtures in condensed matter systems.
- Open Access
- 25 July 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (31) , 45026-45032
Chromium/Vanadium Mixed Oxide Films on Pt(111): Revealing Oxide Alloying Mechanisms in Two Dimensions
The mixing characteristics of oxide materials largely depend on the dimensionality of the system, and many oxide-alloy structures in three dimensions (3D) do not have a 2D analog. To unravel fundamental alloying mechanisms in 2D, V/Cr mixing into oxide thin films is investigated on Pt(111) by scanning tunneling microscopy and density functional theory. The experiments reveal flat, double-stack islands made of a compact bottom and a honeycomb top layer with a 4.5 Å total height. The energetically most favorable structure-match comprises an O-Cr-O trilayer at the interface to the Pt(111) capped by a mixed V/Cr honeycomb top layer. The structure is stabilized by strong interlayer adhesion, reinforced by a charge transfer toward the central trilayer from the metal support and the honeycomb plane. A negative V/Cr mixing enthalpy arises from the presence of two distinct surface sites that enable formation of tetrahedrally coordinated V5+ and octahedrally coordinated Cr3+ cations. The identified thin-film structure bears resemblance to a (111) cut of a hypothetical V/Cr spinel, a unique 2D configuration without bulk equivalent that is stabilized solely by its nanoscale thickness and a strong coupling to the Pt support.
- 25 July 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (31) , 45026-45032
Open AccessChromium/Vanadium Mixed Oxide Films on Pt(111): Revealing Oxide Alloying Mechanisms in Two Dimensions
The mixing characteristics of oxide materials largely depend on the dimensionality of the system, and many oxide-alloy structures in three dimensions (3D) do not have a 2D analog. To unravel fundamental alloying mechanisms in 2D, V/Cr mixing into oxide thin films is investigated on Pt(111) by scanning tunneling microscopy and density functional theory. The experiments reveal flat, double-stack islands made of a compact bottom and a honeycomb top layer with a 4.5 Å total height. The energetically most favorable structure-match comprises an O-Cr-O trilayer at the interface to the Pt(111) capped by a mixed V/Cr honeycomb top layer. The structure is stabilized by strong interlayer adhesion, reinforced by a charge transfer toward the central trilayer from the metal support and the honeycomb plane. A negative V/Cr mixing enthalpy arises from the presence of two distinct surface sites that enable formation of tetrahedrally coordinated V5+ and octahedrally coordinated Cr3+ cations. The identified thin-film structure bears resemblance to a (111) cut of a hypothetical V/Cr spinel, a unique 2D configuration without bulk equivalent that is stabilized solely by its nanoscale thickness and a strong coupling to the Pt support.
- Open Access
- 7 July 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 16 (28) , 7222-7228
Unraveling the Inner Electronic Structure of Chromium-Oxide Films by Probing the Layer-by-Layer Evolution of Their Workfunction
Low-temperature tunneling spectroscopy has been employed to probe the workfunction ϕ of atomically flat Cr-oxide single- and double-stack films grown on Pt(111). While the single-stack Cr3O6 trilayer has a ϕ value of ∼7.0 eV, it decreases to ∼5.0 eV for a Cr6O11 double-stack. The charge redistribution underlying this workfunction drop has been analyzed by density functional theory. The remarkably high ϕ value of the Cr3O6/Pt trilayer, making it a highly electronegative substrate, originates from a massive electron transfer from the Pt(111) into empty Cr-states that reduces 2/3 of the oxide cations from their formal 4+ to a 3+ charge state. The negative surface dipole diminishes upon growing a Cr-O honeycomb layer on top of the trilayer, forming a Cr6O11 double-stack. The adlayer acts as electron donor, enabling the charge transfer from the Pt support to decrease substantially. The charge redistribution not only triggers the detected workfunction drop but also stabilizes the double-stack with respect to a single-stack geometry. A comparison of the observed CrOx/Pt behavior to that of hypothetical double-stack films, made of an interfacial TMO2 trilayer (TM = Ti, V, Mn, Fe) and a capping Cr-O honeycomb plane, allows us to correlate the charge transfer between the individual oxide layers and the substrate to the overall stability of the metal-oxide system.
- 7 July 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 16 (28) , 7222-7228
Open AccessUnraveling the Inner Electronic Structure of Chromium-Oxide Films by Probing the Layer-by-Layer Evolution of Their Workfunction
Low-temperature tunneling spectroscopy has been employed to probe the workfunction ϕ of atomically flat Cr-oxide single- and double-stack films grown on Pt(111). While the single-stack Cr3O6 trilayer has a ϕ value of ∼7.0 eV, it decreases to ∼5.0 eV for a Cr6O11 double-stack. The charge redistribution underlying this workfunction drop has been analyzed by density functional theory. The remarkably high ϕ value of the Cr3O6/Pt trilayer, making it a highly electronegative substrate, originates from a massive electron transfer from the Pt(111) into empty Cr-states that reduces 2/3 of the oxide cations from their formal 4+ to a 3+ charge state. The negative surface dipole diminishes upon growing a Cr-O honeycomb layer on top of the trilayer, forming a Cr6O11 double-stack. The adlayer acts as electron donor, enabling the charge transfer from the Pt support to decrease substantially. The charge redistribution not only triggers the detected workfunction drop but also stabilizes the double-stack with respect to a single-stack geometry. A comparison of the observed CrOx/Pt behavior to that of hypothetical double-stack films, made of an interfacial TMO2 trilayer (TM = Ti, V, Mn, Fe) and a capping Cr-O honeycomb plane, allows us to correlate the charge transfer between the individual oxide layers and the substrate to the overall stability of the metal-oxide system.
- Open Access
- 3 April 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (18) , 185306
Titanium deposition onto Cu2O/Pt(111) films: violent redox-chemistry at a metal-oxide interface
Metal-oxide interactions are pivotal for the functionality of supported-metal catalysts. In this work, x-ray photoelectron spectroscopy and scanning tunneling microscopy (STM) are employed to study the interface reaction between Ti metal and crystalline Cu2O/Pt(111) films. Already at room-temperature, deposited Ti spontaneously oxidizes to predominately +4 and +2 charge states at low and high coverage, respectively. The electron transfer is accompanied by oxygen migration towards the Ti ad-layer, whereby Cu2O gradually reduces to Cu and Ti converts to TiO2. The process gets reinforced by heating the system to 450 K. The local nature of the interface reaction is derived from STM conductance spectroscopy. At low Ti load, electron transfer out of the ad-layer leads to a downward bending of the Cu2O electronic bands. With increasing coverage, the band bending ceases and formation of a Cu x O/TiO x hetero-junction is revealed in the spectra. The signature of metallic ad-particles is only detected at high Ti load, when electron tunneling into Ti deposits bound to the oxide spacer leads to Coulomb-charging effects. The observed strength of the redox reaction at the Ti/Cu2O interface impressively demonstrates the high reductive power of titanium.
- 3 April 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (18) , 185306
Open AccessTitanium deposition onto Cu2O/Pt(111) films: violent redox-chemistry at a metal-oxide interface
Metal-oxide interactions are pivotal for the functionality of supported-metal catalysts. In this work, x-ray photoelectron spectroscopy and scanning tunneling microscopy (STM) are employed to study the interface reaction between Ti metal and crystalline Cu2O/Pt(111) films. Already at room-temperature, deposited Ti spontaneously oxidizes to predominately +4 and +2 charge states at low and high coverage, respectively. The electron transfer is accompanied by oxygen migration towards the Ti ad-layer, whereby Cu2O gradually reduces to Cu and Ti converts to TiO2. The process gets reinforced by heating the system to 450 K. The local nature of the interface reaction is derived from STM conductance spectroscopy. At low Ti load, electron transfer out of the ad-layer leads to a downward bending of the Cu2O electronic bands. With increasing coverage, the band bending ceases and formation of a Cu x O/TiO x hetero-junction is revealed in the spectra. The signature of metallic ad-particles is only detected at high Ti load, when electron tunneling into Ti deposits bound to the oxide spacer leads to Coulomb-charging effects. The observed strength of the redox reaction at the Ti/Cu2O interface impressively demonstrates the high reductive power of titanium.
- Open Access
- 8 March 2025
- Published by Elsevier in Thin Solid Films
- Vol. 816
OPPROMUS: A software tool to analyze optical properties of flat multilayer systems with arbitrarily shaped nanoscale inclusions
- 8 March 2025
- Published by Elsevier in Thin Solid Films
- Vol. 816
Open AccessOPPROMUS: A software tool to analyze optical properties of flat multilayer systems with arbitrarily shaped nanoscale inclusions
- 26 October 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 128 (44) , 18923-18932
Segregation Effects in 2D Mixed Oxide Nano-Islands: Edge Structure and Composition in V2-xFexO3 Monolayers
- 26 October 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 128 (44) , 18923-18932
Segregation Effects in 2D Mixed Oxide Nano-Islands: Edge Structure and Composition in V2-xFexO3 Monolayers