Lorna A. Everall
Research Subjects
Lorna A. Everall has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
I. Bennion
16 shared publications- John A. R. Williams
Aston Institute of Photonic Technologies, Aston University, Aston Triangle, Birmingham B4 7ET, UK
9 shared publications L. Zhang
7 shared publicationsJ.A.R. Williams
6 shared publicationsIan Bennion
Aston Univ. (United Kingdom)
4 shared publications- Kate Sugden
Aston Institute of Photonic Technologies, Aston University, Birmingham, U.K.
4 shared publications
Latest Publications
- 24 August 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 11, 390-391
Design and fabrication of specific filter responses in photosensitive fiber gratings produced by UV holographic exposure
- 24 August 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 11, 390-391
Design and fabrication of specific filter responses in photosensitive fiber gratings produced by UV holographic exposure
- 23 May 2005
- Published by SPIE-Intl Soc Optical Eng
- Vol. 5855, 218-221
Re-configurable multi-channel high-speed FBG strain sensing system for vibration analysis in oil risers
Eight re-configurable, synchronized resonant cavity time-division-multiplexed FBG sensor interrogators provide 16,800 high-resolution measurements-per-second from 280 axially embedded strain sensors, for the analysis of vortex-shedding-induced vibration and bending in a composite oil riser pipe.© (2005) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.
- 23 May 2005
- Published by SPIE-Intl Soc Optical Eng
- Vol. 5855, 218-221
Re-configurable multi-channel high-speed FBG strain sensing system for vibration analysis in oil risers
Eight re-configurable, synchronized resonant cavity time-division-multiplexed FBG sensor interrogators provide 16,800 high-resolution measurements-per-second from 280 axially embedded strain sensors, for the analysis of vortex-shedding-induced vibration and bending in a composite oil riser pipe.© (2005) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.
- 3 January 2005
- Published by Elsevier in Optics Communications
- Vol. 244 (1-6) , 193-197
Resonant cavity based fibre Bragg grating sensor interrogation using ratiometric detection
- 3 January 2005
- Published by Elsevier in Optics Communications
- Vol. 244 (1-6) , 193-197
Resonant cavity based fibre Bragg grating sensor interrogation using ratiometric detection
- 27 September 2004
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 16 (10) , 2323-2325
Resonant Cavity Time-Division-Multiplexed Fiber Bragg Grating Sensor Interrogator
The first resonant-cavity time-division-multiplexed (TDM) fiber Bragg grating sensor interrogation system is reported. This novel design uses a pulsed semiconductor optical amplifier in a cyclic manner to function as the optical source, amplifier, and modulator. Compatible with a range of standard wavelength detection techniques, this optically gated TDM system allows interrogation of low reflectivity "commodity" sensors spaced just 2 m apart, using a single active component. Results demonstrate an exceptional optical signal-to-noise ratio of 36 dB, a peak signal power of over +7 dBm, and no measurable crosstalk between sensors. Temperature tuning shows that the system is fully stable with a highly linear response.
- 27 September 2004
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 16 (10) , 2323-2325
Resonant Cavity Time-Division-Multiplexed Fiber Bragg Grating Sensor Interrogator
The first resonant-cavity time-division-multiplexed (TDM) fiber Bragg grating sensor interrogation system is reported. This novel design uses a pulsed semiconductor optical amplifier in a cyclic manner to function as the optical source, amplifier, and modulator. Compatible with a range of standard wavelength detection techniques, this optically gated TDM system allows interrogation of low reflectivity "commodity" sensors spaced just 2 m apart, using a single active component. Results demonstrate an exceptional optical signal-to-noise ratio of 36 dB, a peak signal power of over +7 dBm, and no measurable crosstalk between sensors. Temperature tuning shows that the system is fully stable with a highly linear response.
- 1 September 2004
- Published by SPIE-Intl Soc Optical Eng
- Vol. 5459, 145-156
A high-performance miniaturized time division multiplexed sensor system for remote structural health monitoring
We report for the first time the design, implementation and commercial application of a hand-held optical time division multiplexed, distributed fibre Bragg grating sensor system. A unique combination of state-of-the art electronic and optical components enables system miniaturization whilst maintaining exceptional performance. Supporting more than 100 low-cost sensors per channel, the battery-powered system operates remotely via a wireless GSM link, making it ideal for real-time structural health monitoring in harsh environments. Driven by highly configurable timing electronics, an off-the-shelf telecommunications semiconductor optical amplifier performs combined amplification and gating. This novel optical configuration boasts a spatial resolution of less than 20cm and an optical signal to noise ratio of better than 30dB, yet utilizes sensors with reflectivity of only a few percent and does not require RF speed signal processing devices. This paper highlights the performance and cost advantages of a system that utilizes TDM-style mass manufactured commodity FBGs. Created in continual lengths, these sensors reduce stock inventory, eradicate application-specific array design and simplify system installation and expansion. System analysis from commercial installations in oil exploration, wind energy and vibration measurement will be presented, with results showing kilohertz interrogation speed and microstrain resolution.© (2004) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.
- 1 September 2004
- Published by SPIE-Intl Soc Optical Eng
- Vol. 5459, 145-156
A high-performance miniaturized time division multiplexed sensor system for remote structural health monitoring
We report for the first time the design, implementation and commercial application of a hand-held optical time division multiplexed, distributed fibre Bragg grating sensor system. A unique combination of state-of-the art electronic and optical components enables system miniaturization whilst maintaining exceptional performance. Supporting more than 100 low-cost sensors per channel, the battery-powered system operates remotely via a wireless GSM link, making it ideal for real-time structural health monitoring in harsh environments. Driven by highly configurable timing electronics, an off-the-shelf telecommunications semiconductor optical amplifier performs combined amplification and gating. This novel optical configuration boasts a spatial resolution of less than 20cm and an optical signal to noise ratio of better than 30dB, yet utilizes sensors with reflectivity of only a few percent and does not require RF speed signal processing devices. This paper highlights the performance and cost advantages of a system that utilizes TDM-style mass manufactured commodity FBGs. Created in continual lengths, these sensors reduce stock inventory, eradicate application-specific array design and simplify system installation and expansion. System analysis from commercial installations in oil exploration, wind energy and vibration measurement will be presented, with results showing kilohertz interrogation speed and microstrain resolution.© (2004) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.
- 1 January 2004
- Published by Optica Publishing Group in Applied Optics
- Vol. 43 (1) , 33-40
Optical sensor interrogation with a blazed fiber Bragg grating and a charge-coupled device linear array
We present what is to our knowledge the first comprehensive investigation of the use of blazed fiber Bragg gratings (BFBGs) to interrogate wavelength division multiplexed (WDM) in-fiber optical sensor arrays. We show that the light outcoupled from the core of these BFBGs is radiated with sufficient optical power that it may be detected with a low-cost charge-coupled device (CCD) array. We present thorough system performance analysis that shows sufficient spectral–spatial resolution to decode sensors with a WDM separation of 75 ρm, signal-to-noise ratio greater than 45-dB bandwidth of 70 nm, and drift of only 0.1 ρm. We show the system to be polarization-state insensitive, making the BFBG–CCD spectral analysis technique a practical, extremely low-cost, alternative to traditional tunable filter approaches.
- 1 January 2004
- Published by Optica Publishing Group in Applied Optics
- Vol. 43 (1) , 33-40
Optical sensor interrogation with a blazed fiber Bragg grating and a charge-coupled device linear array
We present what is to our knowledge the first comprehensive investigation of the use of blazed fiber Bragg gratings (BFBGs) to interrogate wavelength division multiplexed (WDM) in-fiber optical sensor arrays. We show that the light outcoupled from the core of these BFBGs is radiated with sufficient optical power that it may be detected with a low-cost charge-coupled device (CCD) array. We present thorough system performance analysis that shows sufficient spectral–spatial resolution to decode sensors with a WDM separation of 75 ρm, signal-to-noise ratio greater than 45-dB bandwidth of 70 nm, and drift of only 0.1 ρm. We show the system to be polarization-state insensitive, making the BFBG–CCD spectral analysis technique a practical, extremely low-cost, alternative to traditional tunable filter approaches.
- 20 January 2003
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 33, 132-134
Fast and widely tunable Bragg grating reflection filter
- 20 January 2003
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 33, 132-134
Fast and widely tunable Bragg grating reflection filter
- 20 January 2003
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 133-134
Investigation of fibre grating single sideband filtering in a radio-fibre system
We have investigated the effect of chromatic dispersion on radio frequency response of both fibre link and fibre optic RF filter. By using Bragg grating single sideband filtering we could remove the power degradation in the fibre link. And the response of fibre optic RF filter was improved by fibre grating sideband filtering.
- 20 January 2003
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 133-134
Investigation of fibre grating single sideband filtering in a radio-fibre system
We have investigated the effect of chromatic dispersion on radio frequency response of both fibre link and fibre optic RF filter. By using Bragg grating single sideband filtering we could remove the power degradation in the fibre link. And the response of fibre optic RF filter was improved by fibre grating sideband filtering.
- 27 November 2002
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 399-400
Apodised fibre Bragg grating arrays for quasi-distributed strain sensing
Apodised fibre grating arrays are fabricated in order to implement a quasi-distributed strain sensor. Design limitations of such a system are discussed including channel crosstalk, grating bandwidth, and sensor resolution for different apodisation profiles.
- 27 November 2002
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 399-400
Apodised fibre Bragg grating arrays for quasi-distributed strain sensing
Apodised fibre grating arrays are fabricated in order to implement a quasi-distributed strain sensor. Design limitations of such a system are discussed including channel crosstalk, grating bandwidth, and sensor resolution for different apodisation profiles.