Andreas Neumann
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Andreas Neumann has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Kristoff Svensson
Rock characterization for storage and final disposal, Federal Institute for Geosciences and Natural Ressources (BGR), Stilleweg 2, 30655 Hannover, Germany
3 shared publications Stefan Stöber
Institute for Geosciences and Geography Martin‐Luther‐University Halle‐Wittenberg Halle (Saale) Germany
3 shared publications- Christiane Stephan‐Scherb
Institute for Geosciences and Geography Martin‐Luther‐University Halle‐Wittenberg Halle (Saale) Germany
2 shared publications - Christof Lempp
Martin-Luther-University Halle-Wittenberg, Institute for Geosciences and Geography, Von-Seckendorff-Platz 3, 06120 Halle (Saale), Germany
2 shared publications D. Bosbach
2 shared publicationsDirk. Bosbach
2 shared publications
Latest Publications
- Open Access
- 11 February 2026
- Published by Wiley in Advanced Science
- Vol. 13 (22) , e23988
Circular Potential of Lithium‐Ion Battery Recycling Slags: Quantifying Microstructure and Elemental Distribution for a Holistic Valorization
Extractive pyrometallurgy is an established process for recycling lithium‐ion batteries (LIB). One approach to recover lithium from slags produced by pyrometallurgical recycling of LIB involves accumulating lithium in an engineered artificial mineral (EnAM) facilitating recovery. β‐Eucryptite (LiAlSiO 4 ) is a promising EnAM‐candidate as it is chemically similar to the primary lithium ore spodumene (LiAlSi 2 O 6 ) making co‐processing a viable option. However, for economic recycling the β‐eucryptite must have a high lithium content, a high purity, and display a favorable microstructure. The presented work aims to quantify all three parameters. An industrial pyrometallurgical slag was analyzed using scanning electron microscopy (SEM), electron probe microanalysis (EPMA) and laser ablation inductively coupled plasma mass spectroscopy (LA‐ICP‐MS). The analyzed β‐eucryptite shows a high lithium content of 5.45 mass % while containing only low amounts of iron (0.64 mass %) and calcium (0.2 mass %). However, small mean grain sizes (< 21 µm) and unfavorable grain shapes impede the separation of β‐eucryptite. It was discovered that chromium and vanadium were accumulated in spinel phases of the chromite‐coulsonite solid solution series. Producing a Cr, V‐bearing spinel concentrate would enable the recycling of both metals as well as improving the quality of the residual lithium‐depleted slag as a by‐product.
- 11 February 2026
- Published by Wiley in Advanced Science
- Vol. 13 (22) , e23988
Open AccessCircular Potential of Lithium‐Ion Battery Recycling Slags: Quantifying Microstructure and Elemental Distribution for a Holistic Valorization
Extractive pyrometallurgy is an established process for recycling lithium‐ion batteries (LIB). One approach to recover lithium from slags produced by pyrometallurgical recycling of LIB involves accumulating lithium in an engineered artificial mineral (EnAM) facilitating recovery. β‐Eucryptite (LiAlSiO 4 ) is a promising EnAM‐candidate as it is chemically similar to the primary lithium ore spodumene (LiAlSi 2 O 6 ) making co‐processing a viable option. However, for economic recycling the β‐eucryptite must have a high lithium content, a high purity, and display a favorable microstructure. The presented work aims to quantify all three parameters. An industrial pyrometallurgical slag was analyzed using scanning electron microscopy (SEM), electron probe microanalysis (EPMA) and laser ablation inductively coupled plasma mass spectroscopy (LA‐ICP‐MS). The analyzed β‐eucryptite shows a high lithium content of 5.45 mass % while containing only low amounts of iron (0.64 mass %) and calcium (0.2 mass %). However, small mean grain sizes (< 21 µm) and unfavorable grain shapes impede the separation of β‐eucryptite. It was discovered that chromium and vanadium were accumulated in spinel phases of the chromite‐coulsonite solid solution series. Producing a Cr, V‐bearing spinel concentrate would enable the recycling of both metals as well as improving the quality of the residual lithium‐depleted slag as a by‐product.
- Open Access
- 15 December 2024
- Published by Wiley in Advanced Energy and Sustainability Research
- Vol. 6 (5)
Lithium‐Phase Identification in an Industrial Lithium‐Ion‐Battery Recycling Slag: Implications for the Recovery of Lithium
The recycling of lithium‐ion batteries (LIBs) through extractive pyrometallurgy is widely used, but a significant drawback is the loss of lithium to the slag. To address this, lithium‐bearing slag from an industrial LIB recycling plant is analyzed using wavelength dispersive X‐ray fluorescence, inductively coupled plasma optical emission spectroscopy, X‐ray diffraction (XRD), and thermogravimetry coupled infrared. The slag's chemical composition is complex, best described by the ternary system CaO–SiO2–Al2O3, with additional major components being Na2O, Fe2O3, MgO, V2O5, Mn2O3, and Cr2O3. The slag cone shows little chemical zonation and a relatively constant lithium content of Ø 0.82 mass%. The recycling slag shows a mineralogical composition typical of nonferrous slags (e.g., melilite, clinopyroxene, nepheline). Lithium is either bound in β‐eucryptite or, to a lesser extent, in lithium metasilicate. β‐eucryptite contains up to 5.51 mass% lithium stoichiometrically, which is more than typical lithium ores contain. Moreover, β‐eucryptite has potential for the engineering of artificial minerals strategy as an easily implementable lithium phase. β‐eucryptite forms in slags with lower overall lithium content, allowing for the use of slag modifiers that reduce the process temperature. Hence, β‐eucryptite could prove as efficient and feasible option for improving lithium recovery from smelting processes.
- 15 December 2024
- Published by Wiley in Advanced Energy and Sustainability Research
- Vol. 6 (5)
Open AccessLithium‐Phase Identification in an Industrial Lithium‐Ion‐Battery Recycling Slag: Implications for the Recovery of Lithium
The recycling of lithium‐ion batteries (LIBs) through extractive pyrometallurgy is widely used, but a significant drawback is the loss of lithium to the slag. To address this, lithium‐bearing slag from an industrial LIB recycling plant is analyzed using wavelength dispersive X‐ray fluorescence, inductively coupled plasma optical emission spectroscopy, X‐ray diffraction (XRD), and thermogravimetry coupled infrared. The slag's chemical composition is complex, best described by the ternary system CaO–SiO2–Al2O3, with additional major components being Na2O, Fe2O3, MgO, V2O5, Mn2O3, and Cr2O3. The slag cone shows little chemical zonation and a relatively constant lithium content of Ø 0.82 mass%. The recycling slag shows a mineralogical composition typical of nonferrous slags (e.g., melilite, clinopyroxene, nepheline). Lithium is either bound in β‐eucryptite or, to a lesser extent, in lithium metasilicate. β‐eucryptite contains up to 5.51 mass% lithium stoichiometrically, which is more than typical lithium ores contain. Moreover, β‐eucryptite has potential for the engineering of artificial minerals strategy as an easily implementable lithium phase. β‐eucryptite forms in slags with lower overall lithium content, allowing for the use of slag modifiers that reduce the process temperature. Hence, β‐eucryptite could prove as efficient and feasible option for improving lithium recovery from smelting processes.
- Open Access
- 17 June 2024
- Published by Elsevier in Construction and Building Materials
- Vol. 438
Properties of low sulfur leached spodumene as supplementary cementitious material in ordinary Portland cement
- 17 June 2024
- Published by Elsevier in Construction and Building Materials
- Vol. 438
Open AccessProperties of low sulfur leached spodumene as supplementary cementitious material in ordinary Portland cement
- Open Access
- 25 March 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (14) , 15781-15803
Synthesis and Characterization of Single Crystal Zircon-Hafnon Zr(1–x)Hf(x)SiO4 Solid Solutions and the Comparison with the Reaction Products of a TEOS-Based Hydrothermal Route
Two synthesis routes of the zircon–hafnon solid solution series were carried out. The high-temperature route uses the growth of single crystals via a flux mixture that has been cooled down slowly from 1400 °C over 4 weeks. The reaction products were colorless and idiomorphic without byproducts. The hydrothermal tetraethoxysilane (TEOS)-based route represents the low-temperature method at 200 °C for approximately 7 days. The hydrothermal route yielded a white powder and scanning electron microscopy analysis thereof did not reveal any specific idiomorphic properties. However, the synthesis also featured some byproducts besides the zircon–hafnon solid solutions. Thermogravimetric analysis coupled with differential scanning calorimetry, and mass spectroscopy indicated, that hydrothermal reaction products feature the presence of organic residues originating from the starting materials. However, a specific dependency on the hafnium content could not be observed due to the data scatter. Infrared (IR) analysis revealed the presence of Zr/Hf-oxides. The structural characterization demonstrated that properties change constantly with the hafnium amount, however, gradual variations of some properties related to the composition of the solid solution series depend in part on the synthesis route, considering the c/a ratio and IR modes. Furthermore, analyses of the single crystals by Raman spectroscopy and μXRF suggested a nonequilibrated crystal growth based on the starting composition.
- 25 March 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (14) , 15781-15803
Open AccessSynthesis and Characterization of Single Crystal Zircon-Hafnon Zr(1–x)Hf(x)SiO4 Solid Solutions and the Comparison with the Reaction Products of a TEOS-Based Hydrothermal Route
Two synthesis routes of the zircon–hafnon solid solution series were carried out. The high-temperature route uses the growth of single crystals via a flux mixture that has been cooled down slowly from 1400 °C over 4 weeks. The reaction products were colorless and idiomorphic without byproducts. The hydrothermal tetraethoxysilane (TEOS)-based route represents the low-temperature method at 200 °C for approximately 7 days. The hydrothermal route yielded a white powder and scanning electron microscopy analysis thereof did not reveal any specific idiomorphic properties. However, the synthesis also featured some byproducts besides the zircon–hafnon solid solutions. Thermogravimetric analysis coupled with differential scanning calorimetry, and mass spectroscopy indicated, that hydrothermal reaction products feature the presence of organic residues originating from the starting materials. However, a specific dependency on the hafnium content could not be observed due to the data scatter. Infrared (IR) analysis revealed the presence of Zr/Hf-oxides. The structural characterization demonstrated that properties change constantly with the hafnium amount, however, gradual variations of some properties related to the composition of the solid solution series depend in part on the synthesis route, considering the c/a ratio and IR modes. Furthermore, analyses of the single crystals by Raman spectroscopy and μXRF suggested a nonequilibrated crystal growth based on the starting composition.
- 10 November 2020
- Published by Elsevier in Construction and Building Materials
- Vol. 260, 119831
Carbonation of CEM III mortar - Influence of impure CO2 (with SO2 and NO2) and chloride rich brine
- 10 November 2020
- Published by Elsevier in Construction and Building Materials
- Vol. 260, 119831
Carbonation of CEM III mortar - Influence of impure CO2 (with SO2 and NO2) and chloride rich brine
- Open Access
- 26 March 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (6) , 1259
Carbonation of Natural Wollastonite at Non-Ambient Conditions Relevant for CCS—the Possible Use as Cementitious Material in Wellbores
The reaction of wollastonite with CO2 accompanied by SO2 and NO2 in the presence of a chloride-rich brine (230 g/L NaCl, 15 g/L CaCl2, 5 g/L MgCl2) at temperatures relevant to injection conditions (333 K) in carbon capture and storage (CCS) were investigated within the joint BMWi (Federal Ministry for Economic Affairs and Energy) research project CLUSTER. The reaction which describes the formation of wollastonite during metamorphism is reversed and shows a strong temperature dependence. Wollastonite reacts in the presence of CO2 ( ) in aqueous conditions to form calcium carbonate and amorphous silicon oxide. At 333 K and 2 MPa the carbonation reaction of wollastonite ( ) is fast (<24 h). To determine the conversion rate of the reaction quantitatively different methods were used and compared: Powder X-ray diffraction (PXRD) with the Rietveld method and differential scanning calorimetry with thermogravimetry, coupled with a mass spectrometer (DSC-TG/MS) for quantitative phase analysis and for determination of the carbonation. The carbonation (CO2 accompanied by SO2 and NO2) of natural wollastonite at 333 K in presence of chloride-rich brine was rather fast (almost complete after 24 h reaction time).- 26 March 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (6) , 1259
Open AccessCarbonation of Natural Wollastonite at Non-Ambient Conditions Relevant for CCS—the Possible Use as Cementitious Material in Wellbores
The reaction of wollastonite with CO2 accompanied by SO2 and NO2 in the presence of a chloride-rich brine (230 g/L NaCl, 15 g/L CaCl2, 5 g/L MgCl2) at temperatures relevant to injection conditions (333 K) in carbon capture and storage (CCS) were investigated within the joint BMWi (Federal Ministry for Economic Affairs and Energy) research project CLUSTER. The reaction which describes the formation of wollastonite during metamorphism is reversed and shows a strong temperature dependence. Wollastonite reacts in the presence of CO2 ( ) in aqueous conditions to form calcium carbonate and amorphous silicon oxide. At 333 K and 2 MPa the carbonation reaction of wollastonite ( ) is fast (<24 h). To determine the conversion rate of the reaction quantitatively different methods were used and compared: Powder X-ray diffraction (PXRD) with the Rietveld method and differential scanning calorimetry with thermogravimetry, coupled with a mass spectrometer (DSC-TG/MS) for quantitative phase analysis and for determination of the carbonation. The carbonation (CO2 accompanied by SO2 and NO2) of natural wollastonite at 333 K in presence of chloride-rich brine was rather fast (almost complete after 24 h reaction time). - Open Access
Analysis of the Secondary Phases Formed by Corrosion of U3Si2-Al Research Reactor Fuel Elements in the Presence of Chloride Rich Brines
Corrosion experiments with non-irradiated U3Si2-Al research reactor fuel samples were carried out in synthetic MgCl2-rich brine to identify and quantify the secondary phases because depending on their composition and on their amount, such compounds can act as a sink for the radionuclide release in final repositories. Within the experimental period of 100 days at 90 °C and anoxic conditions the U3Si2-Al fuel sample was completely disintegrated. The obtained solids were subdivided into different grain size fractions and non-ambient X-ray diffraction (XRD) was applied for their qualitative and quantitative phase analysis. The secondary phases consist of lesukite (aluminum chloro hydrate) and layered double hydroxides (LDH) with varying chemical compositions. Furthermore, iron, residues of non-corroded nuclear fuel (U3Si2), iron oxy hydroxides and chlorides were also observed. In addition to high amorphous contents (>45 wt %) hosting the uranium, the quantitative phase analysis showed, that LDH compounds and lesukite were the major crystalline phases. Scanning electron microscopy (SEM) and energy dispersive -Xray spectroscopy (EDS) confirmed the results of the XRD analysis. Elemental analysis revealed that U and Al were concentrated in the solids. However, most of the iron, added as Fe(II) aqueous species, remained in solution.
Open AccessAnalysis of the Secondary Phases Formed by Corrosion of U3Si2-Al Research Reactor Fuel Elements in the Presence of Chloride Rich Brines
Corrosion experiments with non-irradiated U3Si2-Al research reactor fuel samples were carried out in synthetic MgCl2-rich brine to identify and quantify the secondary phases because depending on their composition and on their amount, such compounds can act as a sink for the radionuclide release in final repositories. Within the experimental period of 100 days at 90 °C and anoxic conditions the U3Si2-Al fuel sample was completely disintegrated. The obtained solids were subdivided into different grain size fractions and non-ambient X-ray diffraction (XRD) was applied for their qualitative and quantitative phase analysis. The secondary phases consist of lesukite (aluminum chloro hydrate) and layered double hydroxides (LDH) with varying chemical compositions. Furthermore, iron, residues of non-corroded nuclear fuel (U3Si2), iron oxy hydroxides and chlorides were also observed. In addition to high amorphous contents (>45 wt %) hosting the uranium, the quantitative phase analysis showed, that LDH compounds and lesukite were the major crystalline phases. Scanning electron microscopy (SEM) and energy dispersive -Xray spectroscopy (EDS) confirmed the results of the XRD analysis. Elemental analysis revealed that U and Al were concentrated in the solids. However, most of the iron, added as Fe(II) aqueous species, remained in solution.
- Open Access
- 20 February 2018
- Published by MDPI AG in Applied Sciences
- Vol. 8 (2) , 304
The Conversion of Wollastonite to CaCO3 Considering Its Use for CCS Application as Cementitious Material
The reaction of wollastonite (CaSiO3) with CO2 in the presence of aqueous solutions (H2O) and varied temperature conditions (296 K, 323 K, and 333 K) was investigated. The educts (CaSiO3) and the products (CaCO3 and SiO2) were analyzed by scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), and differential scanning calorimetry with thermogravimetry coupled with a mass spectrometer and infrared spectrometer (DSC TG/MS/IR). The reaction rate increased significantly at higher temperatures and seemed less dependent on applied pressure. It could be shown that under the defined conditions wollastonite can be applied as a cementitious material for sealing wells considering CCS applications, because after 24 h the degree of conversion from CaSiO3 to CaCO3 at 333 K was very high (>90%). As anticipated, the most likely application of wollastonite as a cementitious material in CCS would be for sealing the well after injection of CO2 in the reservoir.
- 20 February 2018
- Published by MDPI AG in Applied Sciences
- Vol. 8 (2) , 304
Open AccessThe Conversion of Wollastonite to CaCO3 Considering Its Use for CCS Application as Cementitious Material
The reaction of wollastonite (CaSiO3) with CO2 in the presence of aqueous solutions (H2O) and varied temperature conditions (296 K, 323 K, and 333 K) was investigated. The educts (CaSiO3) and the products (CaCO3 and SiO2) were analyzed by scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), and differential scanning calorimetry with thermogravimetry coupled with a mass spectrometer and infrared spectrometer (DSC TG/MS/IR). The reaction rate increased significantly at higher temperatures and seemed less dependent on applied pressure. It could be shown that under the defined conditions wollastonite can be applied as a cementitious material for sealing wells considering CCS applications, because after 24 h the degree of conversion from CaSiO3 to CaCO3 at 333 K was very high (>90%). As anticipated, the most likely application of wollastonite as a cementitious material in CCS would be for sealing the well after injection of CO2 in the reservoir.
- 1 January 2017
- Published by Elsevier in Journal of Solid State Chemistry
- Vol. 245, 82-88
Structural, vibrational, and thermochemical properties of the monazite-type solid solution La1–Pr PO4
- 1 January 2017
- Published by Elsevier in Journal of Solid State Chemistry
- Vol. 245, 82-88
Structural, vibrational, and thermochemical properties of the monazite-type solid solution La1–Pr PO4