RHRokhani Hasbullah

Rokhani Hasbullah

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Rokhani Hasbullah has a total of 64 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect of blanching and freeze drying on the quality of salak pondoh fruit ( Salacca edulis Reinw. )

    by Rokhani Hasbullah, Dedin Junaedin

    This study aimed to investigate the effects of blanching and freeze-drying duration on the quality of salak pondoh fruit. The materials used were salak pondoh fruits obtained from the Sleman Regency, Yogyakarta. The fruits were peeled, cut horizontally, blanched for 3 and 6 min at 85°C, and then frozen at −50°C for 3 h. The frozen fruit was then freeze-dried for 24, 48, and 72 h, respectively. The quality parameters observed were drying rate, weight loss, hardness, total soluble solids, rehydration ratio, and organoleptic testing of the freeze-dried salak fruit. A completely randomized factorial design was used with two factors: blanching time (3 and 6 min) and freeze-drying time (24, 48, and 72 h). Data were analyzed using analysis of variance and Duncan’s multiple range test. The results showed that blanching time did not significantly affect the drying rate, moisture content, weight loss, hardness, total soluble solids, and rehydration ratio. However, it significantly affected the organoleptic taste test. Freeze-drying time significantly affected the drying rate, moisture content, weight loss, hardness, total soluble solids, and rehydration ratio. Blanching for 3 min and freeze-drying for 72 h produced the best freeze-dried salak with a drying rate of 13.13% db/h, moisture content of 5.76 %wb, hardness of 1.7 kgf, total dissolved solids of 23.04°Brix, and organoleptically produced a higher acceptance level for color, aroma, taste, texture, and overall quality with a score of 5 (liked).

  • Open Access

    Production process of butter avocado powder ( Persea americana Mill.) using spray-drying technology

    by Rokhani Hasbullah, Rizki Bagus Sambogo

    Butter avocado is a tropical fruit with high nutritional value; however, it is highly perishable, thus requiring postharvest processing to extend its shelf life. Spray drying is a potential method for producing stable and value-added avocado powders. This study aimed to examine the effects of filler type, filler concentration, and spray dryer inlet temperature on the physicochemical quality of avocado powders. The raw material used was butter avocado obtained from the Sukahati Farmers Group, Cibinong District, Bogor, with uniform ripeness and average weight of 500 g. The fruits were sorted, peeled, and the flesh was separated to produce a puree with the addition of water at a 1:1 ratio. The puree was then dried using a spray dryer at inlet temperatures of 110, 120, and 130°C, with maltodextrin and gum arabic as fillers at concentrations of 10% and 20%. The experimental design was a completely randomized factorial design with two factors: inlet temperature and filler concentration, with filler type as the group factor. The parameters observed included the yield, moisture content, color difference (ΔE), pH, and total soluble solids (TSS). The results showed that the filler type, concentration, and inlet temperature significantly influenced the yield, moisture content, color, and pH, but had no significant effect on the TSS. The best treatment combination was obtained using 10% maltodextrin as the carrier material with an inlet temperature of 130°C, resulting in the highest yield (7.35%), low moisture content (4.21%), stable pH (6.74), lowest color difference (9.77), and TSS (1.10°Brix).”

  • Open Access

    Modeling Sustainable Marketing Innovation Strategies in the Pharmaceutical Industry: A Systemic Approach from Indonesia

    by Zuldekra, Rokhani Hasbullah, Zenal Asikin, Tanti Novianti

    Innovation in the pharmaceutical industry is increasingly recognized as a systemic and interdependent process that requires holistic coordination across technological, organizational, and marketing domains. This study examines the structural interrelationships among six dimensions of marketing innovation—process, product, organization, price, promotion, and distribution—within Indonesia’s pharmaceutical sector. Using Fuzzy Interpretive Structural Modeling (Fuzzy ISM), expert evaluations from clinical, industrial, and regulatory professionals were analyzed to identify causal linkages and feedback loops that characterize sustainable innovation systems. The results show that marketing innovation functions not as a hierarchical structure but as a dynamic, circular configuration termed the Integrated Cycle Model of Sustainable Marketing Innovation. Each dimension simultaneously acts as both a driver and a dependent element, forming continuous reciprocal interactions that enhance adaptability, strategic resilience, and competitive advantage. The absence of a dominant driver highlights the need for systemic orchestration rather than isolated innovation initiatives. The study advances systemic innovation theory by demonstrating that sustainability in pharmaceutical marketing emerges from multidirectional feedback and balanced capability alignment across all innovation dimensions. The Integrated Cycle Model offers theoretical and managerial insights for designing coordinated innovation strategies and policy frameworks that support sustainable growth in emerging markets.

  • Open Access

    Prioritizing Sustainable Marketing Innovation for Pharmaceutical Firms in Indonesia

    by Zuldekra, Rokhani Hasbullah, Zenal Asikin, Tanti Novianti

    The Indonesian pharmaceutical industry faces increasing pressure to achieve sustainable performance amid regulatory constraints and evolving healthcare demands. This study aims to identify and prioritize strategic dimensions of sustainable marketing innovation using the Fuzzy Analytic Hierarchy Process (Fuzzy AHP). Expert judgments were collected from eight senior professionals across academia, industry, and government through structured online questionnaires and digital interviews. Six innovation dimensions (product, process, organization, price, promotion, and distribution) were evaluated. The analysis produced normalized priority weights, revealing that promotion (0.2384) and process (0.2253) innovations ranked highest, followed by product (0.1790) and price (0.1699), while distribution (0.1202) and organization (0.0672) held lower importance. These results highlight the critical role of ethical promotion, digital engagement, and operational excellence in strengthening competitive and sustainable market performance. A sensitivity analysis confirmed the stability of these rankings across varying fuzzification scales. By integrating the Resource-Based View (RBV) with Fuzzy AHP, this study contributes a reproducible framework for transforming expert knowledge into strategic priorities under uncertainty. The findings offer practical guidance for pharmaceutical firms to allocate innovation resources more effectively and enhance long-term sustainability.


  • Open Access

    Biodegradable Packaging Fillers Reduce Mechanical Damage and Preserve Postharvest Quality of Cherry Tomatoes

    by Safira Fergiana, Rokhani Hasbullah

    Cherry tomato (Lycopersicum esculentum Mill.) is a perishable commodity due to its delicate texture. Consequently, it necessitates effective postharvest handling. Cherry tomatoes frequently incur mechanical damage during transit due to the voids in the packaging, leading to friction and collisions with the packaging material. This study evaluates the impact of packaging fillers on mechanical damage to tomatoes during transportation and identifies the optimal packaging fillers for cherry tomatoes. This study included plastic fruit crate packaging with dimensions of 38 cm x 26 cm x 12 cm. This study included filler materials consisting of long shredded newsprint and banana leaves and a control group without filler. Transportation simulation was conducted at 3,9 Hz, amplitude 4,2 cm for 90 minutes, equivalent to 108,9 km of transportation. The results showed that packaging with filler significantly reduced fruit damage compared to the control. The highest reduction was observed in the combined filler treatment, which decreased mechanical damage by 62.5% relative to the control. Banana leaf filler also provided good protection, reducing weight loss by 45.8% and maintaining fruit firmness (1.63 kg cm⁻²) compared to control (1.08 kg cm⁻²). However, newsprint filler minimized color change, maintaining the red index 34.15 compared to 41.22 in the control. Overall, the combined filler treatment performed best in preserving postharvest quality. These findings suggest that biodegradable packaging fillers, particularly banana leaves and their combination with newsprint, are effective and environmentally friendly alternatives for extending the shelf life of cherry tomatoes during transportation.

  • Open Access

    The Use of Chitosan Coating to Maintain the Quality of Cherry Tomatoes (Lycopersicum esculentum var. cerasiforme)

    by Salsa Nurfadhillah, Rokhani Hasbullah

    Cherry tomatoes are prone to deteriorate during storage. Proper post-harvest technology is needed to maintain the quality of cherry tomatoes. This research aims to examine the effect of chitosan coating and storage temperature on the quality of cherry tomatoes and determine the optimal treatment. Cherry tomatoes of the Fortesta variety were used for experiment. Cherry tomatoes were dipped in chitosan solution with concentrations of 1% and 2%, and control. Each group of cherry tomatoes was then stored at temperatures of 15°C and 25°C. The research was arranged under a factorial completely randomized design with three replications. Measurement was performed on respiration rate, weight loss, firmness, total soluble solids, and organoleptic tests (freshness, color, and aroma) of cherry tomatoes. The results showed that chitosan coating affects the respiration rate, weight loss, firmness, total soluble solids, and organoleptic tests. Storage temperature affects respiration rate, weight loss, firmness, total soluble solids, and organoleptic tests. Chitosan coating of 2% concentration and storage temperature of 15°C were the best treatments that were able to suppress respiration rate, weight loss, firmness, total soluble solids, and were still accepted by panelists on the 21st day of storage. In contrast, the control only lasted until the 12th day of storage. Keywords: Cherry tomatoes, Chitosan, Cold storage, Edible coating, Quality.


  • Open Access

    Shelf life prediction of cacao powder using isothermic sorption approach

    by Rokhani Hasbullah, Nadya Fazira Islah Mahdania

    Tujuan dari penelitian ini adalah menentukan model kurva sorpsi isotermis bubuk kakao dan menduga umur simpan bubuk kakao pada kemasan standing pouch aluminium foil dan kraft dengan pendekatan sorpsi isotermis. Penelitian ini diawali dengan pembuatan bubuk kakao, penentuan kadar air bubuk kakao pada berbagai kelembaban relatif (RH) penyimpanan dan pendugaan umur simpan bubuk kakao pada kemasan standing pouch aluminium foil dan kraft dengan pendekatan sorpsi isotermis . Bubuk kakao diperoleh dengan cara menggiling menggunakan mesin pembubuk kakao dan mengayaknya menggunakan ayakan Tyler dengan ukuran mesh 60. Kadar air kesetimbangan (KAK) bubuk kakao diperoleh dengan menyimpan bubuk kakao pada berbagai kelembaban relative (RH) menggunakan larutan garam jenuh MgCl2, K2CO3, NaNO2, NaCl dan KCl. Model sorpsi isotermis diperoleh dengan memplotkan KAK dengan nilai aktivitas air (aw) (RH/100). Hasil penelitian menunjukkan bahwa model Hasley merupakan model paling tepat untuk menggambarkan fenomena sorpsi isotermis bubuk kakao dengan nilai Mean Relative Determination (MRD) paling kecil yaitu 2.007. Umur simpan bubuk kakao yang simpan dengan kemasan standing pouch aluminium foil pada penyimpanan suhu 30 °C dan kelembaban relatif (RH) 75% dan 80% berturut-turut adalah 665 hari dan 514 hari. Sedangkan dengan kemasan standing pouch kraft selama 293 hari dan 227 hari.


  • Open Access

    Pendugaan Umur Simpan Bubuk Daun Torbangun Dalam Berbagai Jenis Kemasan

    by Lydia Ariani, Rokhani Hasbullah, Usman Ahmad

    Torbangun leaf powder can improve the quality and quantity of breast milk in pregnant and lactating women because it contains bioactive compounds from phenol group, especially thymol and carvacrol. The purpose of this study was to examine parameters change of torbangun leaf powder (moisture content, free fatty acids, antioxidant activity and total phenol), and estimate shelf life of torbangun leaf powder in various packaging. Accelerated Shelf-Life Testing method based on Arrhenius approach was used to estimate shelf life of torbangun leaf powder. 100 g of torbangun leaf powder were stored in three packaging materials, namely HDPE, PP and aluminum foil at 30oC, 35oC, 40oC, 45oC and 50oC. The results showed that temperatures affect moisture content, free fatty acids, antioxidant activity and total phenol of torbangun leaf powder. Arrhenius model describes total phenol change, where ln k= 28.29 × -9746.8/T, ln k= 30,866 × -10565/T and ln k= 29,162 × -10019/T for HDPE, PP and aluminum packaging. foil. Thus, shelf life of torbangun leaf powder at 15oC and 28oC for HDPE is 691 days and 160 days, followed by PP is 899 days and 184 days, and aluminium foil is 807 days and 173 days.


  • Open Access

    Karakteristik dan kelayakan Finansial Usahatani Mangga Gedong Gincu Di Kabupaten Indramayu

    by Khoirul Umam, Rokhani Hasbullah, Mohamad Solahudin

    Gedong gincu mango is one of the mango varieties that is excellent for local and foreign people because it has its own uniqueness when compared to other types of mango. The aims of this study were to analyze: 1) the characteristics of gedong gincu mango farming in Indramayu district, 2) the financial feasibility of gedong gincu mango farming, and 3) the sensitivity of gedong gincu mango farming to changes in production costs, selling prices, production quantities and land rent. Data collection was carried out by means of observation and interviews with 16 respondent farmers in October-November 2019. The results showed that the gedong gincu mango has great potential to continue to be developed. The initial investment cost required is Rp. 52,226,667, -/ha and for subsequent maintenance an average of Rp. 8,284,000 -/ha/month. At an interest rate of 8.75%, it shows that mango gedong gincu farming is feasible to be developed with an NPV value of Rp. 39,289.514, IRR 91.00% and B/C 1.43. Based on the sensitivity analysis, the most determining factors in income (profit/loss) for mango gedong gincu farmers in Indramayu district are a decrease in the selling price and the amount of production, and if there is an increase in production costs, selling prices and the amount of production at once.


  • Open Access

    Modeling Sorption Isotherm of Parboiled Rice and Shelf-life Study on Plastic Film Packaging

    by Hasniar Hasniar, Departemen Teknik Mesin Dan Biosistem Program Studi Teknologi Pascapanen, Rokhani Hasbullah, I Wayan Astika, Institut Pertanian Bogor. Departemen Teknik Mesin Dan Biosistem

    Pemodelan Sorpsi Isotermi dan Pendugaan Umur Simpan Beras Pratanak pada Kemasan Plastik Film