DTDaniel Thomas William Toolan

Daniel Thomas William Toolan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Daniel Thomas William Toolan has a total of 253 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Discerning between Excimer and Singlet Fission Sites Using Modulated Magnetic Field Photoluminescence

    by Jessica R. Walton, Miles I. Collins, Rachel C. Kilbride, Daniel T. W. Toolan, Lars van Turnhout, Olivier Paré-Labrosse, Dane R. McCamey, Christiane Timmel, Murad J. Y. Tayebjee, Akshay Rao

    Magnetic field effects play a key role in the characterization of organic electronic materials. In particular, the microscopic processes underlying singlet fission and triplet–triplet annihilation have been clarified in recent years through the observation and subsequent theoretical explanation of magnetic field effects in these processes. Here, we study magnetic field effects on the luminescence of 5,12-bis((triisopropylsilyl)ethynyl)tetracene, a well-studied material in which both singlet fission and triplet–triplet annihilation occur. By performing highly sensitive modulated-field magneto-photoluminescence experiments we observe magnetic field effect lineshapes with rich detail, allowing a precise characterization of triplet exciton dynamics. By additionally filtering these magnetic field effects by luminescence wavelength, we can identify the excimer state by its unique magnetic field signature. Finally, we show that a theoretical explanation of these field effects requires a model that explicitly accounts for quantum coherences, which highlights the importance of detailed spin dynamics modeling in understanding magnetic field effects, even at room temperature.

  • Open Access

    2D Copper MOF Membranes with Precise Pores for Ionic Memory

    by Hiran Jyothilal, Raj Kumar Gogoi, Yuchen Liu, Vikas Sharma, Solleti Goutham, Michael Hutton, Rachel C. Kilbride, Daniel T.W. Toolan, Ashok Keerthi, Boya Radha

    Biological ion channels play a critical role in the complex physiological processes of living organisms. Inspired by these natural systems, we demonstrate the fabrication of ultrathin 2D copper‐based metal‐organic framework (CuMOF) films and their application to mimic key functionalities of biological membranes. Using a liquid–air interface synthesis technique, we synthesized CuMOF films with tunable thicknesses ranging from 1.4 nm to 20 nm over centimeter‐scale areas. These membranes exhibit well‐defined nanoporous structures of pore diameter 1.5 nm that facilitate nanofluidic ion transport. The ionic conductance of the CuMOF films strongly depends on both film thickness and electrolyte concentration, demonstrating surface‐charge‐dominated transport and Na + selective ion conduction at low ionic strengths. Moreover, this selective ion transport enables osmotic energy generation under a concentration gradient. Additionally, the CuMOF films exhibit ionic memristive behavior, including reversible synaptic potentiation and depression, closely resembling synaptic plasticity. This study presents a scalable, tunable platform for developing bioinspired ionic devices with potential applications in selective ion transport, nanofluidic energy harvesting, and neuromorphic computing.


  • Open Access

    Enhanced third-order optical nonlinearity in a dipolar carbene-metal-amide material with two-photon excited delayed fluorescence

    by Ikechukwu D. Nwosu, Lujo Matasović, Tárcius N. Ramos, Nguyen Le Phuoc, Giacomo Londi, Alexander J. Gillett, Daniel T. W. Toolan, Charles T. Smith, George F. S. Whitehead, Mireille Blanchard-Desce, et al.

    Advanced photonic materials showing two-photon absorption (2PA) have been widely explored to develop three-dimensional imaging, micro and nanofabrication, all-optical switching, lithography on a nanoscale and many other enabling technologies. These all require nonlinear absorption chromophores with intrinsic 2PA cross-sections and long-term photo- and thermal stability. Here, we disclose the very first example of the dipolar carbene-metal-amide (CMA) material showing a enhanced 2PA cross-section up to 105 GM. Overall molecular design considerations such as extended π-conjugation (to increase polarizability), minimizing the singlet-triplet energy gap (ΔE ST ), and using heavy metal atoms are the first design principles to obtain bright one- and two-photon excited thermally activated delayed fluorescence (TADF) material, showing one of the highest radiative rate of 2.18·10 6  s -1 across CMA materials. Bright red CMA 2P-TADF material shows excellent photostability (LT 50 = 3 h) to 20 mW femtosecond pulsed laser excitation at 1000 nm, encouraging further CMA exploration for future applications in advanced photonic technologies requiring third-order nonlinear optical properties.


  • Open Access

    Influence of film formation kinetics on the dispersion of colloidal quantum dots in organic small molecule matrices

    by Rachel C. Kilbride, Michael P. Weir, James Xiao, Simon A. Dowland, Jurjen F. Winkel, John E. Anthony, Akshay Rao, Richard A. L. Jones, Anthony J. Ryan, Daniel T. W. Toolan

    Improving the dispersion of colloidal quantum dots (QDs) within organic semiconductor (OSC) matrices remains critical for advancing hybrid nanocomposite optoelectronic technologies.

  • Open Access

    Designing for Dispersibility: How Crystallinity and Solubilizing Groups Affect Quantum Dot Dispersion in Diphenylhexatriene Matrices

    by Rachel C. Kilbride, Anastasia Leventis, Stephanie Montanaro, Ashish Sharma, James Xiao, Simon A. Dowland, Jurjen F. Winkel, Hugo Bronstein, Neil C. Greenham, Richard H. Friend, et al.

    Nanocomposite films combining organic semiconductors (OSCs) and colloidal quantum dots (QDs) are promising systems for next-generation optoelectronic technologies such as singlet-fission photon multiplication (SF-PM). Here, we show that tuning the solubilizing substituents on the high-triplet-energy SF-OSC (1E,3E,5E)-1,6-diphenylhexa-1,3,5-triene (DPH) enables precise control over film morphology and QD dispersibility. Grazing-incidence X-ray scattering reveals that PbS QDs ligated with oleic acid are poorly dispersed in all DPH derivatives, whereas hexanoic acid or DPH-carboxylic acid ligands significantly improve QD dispersibility. A clear design rule emerges: increasing solubilizing group volume relative to the DPH core enhances QD dispersibility, enabling well-dispersed QDs even in highly ordered DPH matrices. An exception arises in a derivative that forms an amorphous, nonequilibrium morphology that fully disperses QDs, but later crystallizes, resulting in QD aggregation. These findings show that OSC:QD nanocomposites require co-optimization of ligand-OSC chemistry and crystallization kinetics, providing a framework for designing efficient SF-PM and related technologies.


  • Open Access

    Triplet exciton recycling in organic solar cells enabled by an extrinsic triplet–triplet annihilation dopant

    by Darcy M. L. Unson, Rachel C. Kilbride, Jeannine Grüne, Daniel T. W. Toolan, Pascal Kaienburg, Subhrangsu Mukherjee, Sangcheol Yoon, Nakul Jain, Hanbo Yang, Jarvist M. Frost, et al.

    By doping the triplet–triplet annihilation material rubrene into a PM6:Y6 organic solar cell, the triplet excitons formed via non-geminate charge recombination can be recycled.

  • Time-Resolved Small-Angle X-ray Scattering Studies of pH-Induced PMPC–PDPA Diblock Copolymer Self-Assembly

    by Guoxing Liao, Daniel T. W. Toolan, Nicholas J. Warren, Paul D. Topham, Oleksandr O. Mykhaylyk, Yunjie Zhang, Nicholas J. Terrill, LinGe Wang

    Despite the potential of poly(2-methacryloyloxy ethyl phosphorylcholine)-poly(2-(diisopropylamino)ethyl methacrylate) (PMPC-PDPA) diblock copolymer nanoparticles for several biological applications, the exact mechanism of pH-induced self-assembly of the PMPC-PDPA chains into nanoparticles remains unclear, although it has been extensively studied by ex situ transmission electron microscopy. Here, we probe this process using time-resolved small-angle X-ray scattering (TR-SAXS) to gain an understanding of the phenomena that occur on the nanoscale. Modeling the TR-SAXS data indicated that spherical micelles and vesicles were formed at a pH as low as 3, and the spherical micelle and vesicle structures reformed at pH 5.5. At pH ∼5.5, insoluble PMPC25-PDPA70 diblock copolymer precipitation was also observed by SAXS. A huge soluble PMPC25-PDPA70 diblock copolymer reservoir might assist in PMPC25-PDPA70 vesicle construction. Additionally, a potential pathway of vesicle construction by spherical micelle fusion was supported by the SAXS evidence.


  • Open Access

    Discerning Between Excimer and Singlet Fission Sites in TIPS-tetracene using Modulated Magnetic Field Photoluminescence

    by Jessica Walton, Miles Collins, Rachel Kilbride, Daniel Toolan, Lars van Turnhout, Olivier Paré-Labrosse, Dane McCamey, Murad Tayebjee, Christiane Timmel, Akshay Rao

    Magnetic field effects play a key role in the characterisation of organic electronic materials. In particular, the microscopic processes underlying singlet fission and triplet-triplet annihilation have been clarified in recent years, through the observation and subsequent theoretical explanation of magnetic field effects in these processes. Here, we study magnetic field effects on the luminescence of 5,12-Bis((triisopropylsilyl)ethynyl) tetracene: a quintessential material in which both singlet fission and triplet-triplet annihilation occur. By performing highly sensitive modulated-field magneto-photoluminescence experiments, we find magnetic field effect lineshapes of unprecedented detail, allowing a precise characterisation of triplet exciton dynamics. By additionally filtering these magnetic field effects by luminescence wavelength, we can identify the historically elusive excimer state by its unique magnetic field signatures. Finally, we show that a theoretical explanation of these field effects requires a model that explicitly accounts for quantum coherences, which highlights the importance of detailed spin dynamics modelling in understanding magnetic field effects, even at room temperature.

  • Open Access

    Fast, slow and reverse polymorph transformations in thin films of a 5,10-dihydroindolo[3,2-b]indole derivative

    by Niklas J. Herrmann, Oleksandra Korychenska, Ngoc Phi Ta, Guy E. Mayneord, Xabier Rodríguez-Martínez, Daniel T. W. Toolan, Craig C. Robertson, Ahmed Iraqi, Jenny Clark, Jana Zaumseil

    The polymorph transformation dynamics of a new, strongly fluorescent, organic p-type semiconductor (C8-C-inin) are explored. Depending on deposition method, film morphology and annealing, metastable polymorphs are stabilized or induced.


  • Open Access

    A green solvent enables precursor phase engineering of stable formamidinium lead triiodide perovskite solar cells

    by Benjamin M. Gallant, Philippe Holzhey, Joel A. Smith, Saqlain Choudhary, Karim A. Elmestekawy, Pietro Caprioglio, Igal Levine, Alexandra A. Sheader, Esther Y-H. Hung, Fengning Yang, et al.

    Perovskite solar cells (PSCs) offer an efficient, inexpensive alternative to current photovoltaic technologies, with the potential for manufacture via high-throughput coating methods. However, challenges for commercial-scale solution-processing of metal-halide perovskites include the use of harmful solvents, the expense of maintaining controlled atmospheric conditions, and the inherent instabilities of PSCs under operation. Here, we address these challenges by introducing a high volatility, low toxicity, biorenewable solvent system to fabricate a range of 2D perovskites, which we use as highly effective precursor phases for subsequent transformation to α-formamidinium lead triiodide (α-FAPbI3), fully processed under ambient conditions. PSCs utilising our α-FAPbI3 reproducibly show remarkable stability under illumination and elevated temperature (ISOS-L-2) and “damp heat” (ISOS-D-3) stressing, surpassing other state-of-the-art perovskite compositions. We determine that this enhancement is a consequence of the 2D precursor phase crystallisation route, which simultaneously avoids retention of residual low-volatility solvents (such as DMF and DMSO) and reduces the rate of degradation of FA+ in the material. Our findings highlight both the critical role of the initial crystallisation process in determining the operational stability of perovskite materials, and that neat FA+-based perovskites can be competitively stable despite the inherent metastability of the α-phase.