Marie Babel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Marie Babel has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- Claudio Pacchierotti
CNRS, Univ Rennes, Inria, IRISA, Rennes, France
6 shared publications - Maud Marchal
Univ. Rennes, INSA, IRISA, Inria, Rennes, France
6 shared publications François Pasteau
INSA Rennes, Avenue du Général Leclerc, Rennes, Bretagne, 35708, FRANCE
5 shared publications- Pierre-Antoine Cabaret
Univ Rennes, INSA Rennes, IRISA, Inria, CNRS
5 shared publications - Bastien Fraudet
Pôle MPR St Hélier, Rennes Cedex, France
2 shared publications - Fabien Grzeskowiak
National Institute of Applied Sciences Rennes (INSA) and the National Institute for Research in Digital Science and Technology (Inria) Rennes, Rennes, France
2 shared publications
Latest Publications
- Open Access
- 26 November 2025
- Published by University of Szeged in Acta Cybernetica
- Vol. 27 (3) , 337-357
Ultra-Wideband Smart Wheelchair Pose Estimation Using Interval Analysis
In this paper, we introduce a reliable positioning method for a smart wheelchair by using ultra-wideband (UWB) technology. This method provides confidence domains of the pose by assuming bounded measurement errors and proprioceptive information, without any assumptions of independence. Exploiting interval analysis and constraint propagation techniques, we characterize the sets of all feasible poses that are consistent with the measurements. Our method has been validated through experiments with a smart power wheelchair equipped with UWB sensors in realistic conditions. The results demonstrate that our approach consistently provides guaranteed uncertainty domains with 100% integrity across the tested dataset, even when faced with inconsistent measurements. In addition, we compare our interval-based method with M-estimator approaches, and show that while achieving slightly worse positioning accuracy, our method offers superior consistency.
- 26 November 2025
- Published by University of Szeged in Acta Cybernetica
- Vol. 27 (3) , 337-357
Open AccessUltra-Wideband Smart Wheelchair Pose Estimation Using Interval Analysis
In this paper, we introduce a reliable positioning method for a smart wheelchair by using ultra-wideband (UWB) technology. This method provides confidence domains of the pose by assuming bounded measurement errors and proprioceptive information, without any assumptions of independence. Exploiting interval analysis and constraint propagation techniques, we characterize the sets of all feasible poses that are consistent with the measurements. Our method has been validated through experiments with a smart power wheelchair equipped with UWB sensors in realistic conditions. The results demonstrate that our approach consistently provides guaranteed uncertainty domains with 100% integrity across the tested dataset, even when faced with inconsistent measurements. In addition, we compare our interval-based method with M-estimator approaches, and show that while achieving slightly worse positioning accuracy, our method offers superior consistency.
- Open Access
- 24 January 2025
- Published by IOP Publishing in Journal of Neural Engineering
- Vol. 22 (1)
Depth-sensor-based shared control assistance for mobility and object manipulation: toward long-term home-use of BCI-controlled assistive robotic devices
Objective. Assistive robots can be developed to restore or provide more autonomy for individuals with motor impairments. In particular, power wheelchairs can compensate lower-limb impairments, while robotic manipulators can compensate upper-limbs impairments. Recent studies have shown that Brain-Computer Interfaces (BCI) can be used to operate this type of devices. However, activities of daily living and long-term use in real-life contexts such as home require robustness and adaptability to complex, changing and cluttered environments which can be problematic given the neural signals that do not always allow a safe and efficient use. Approach. This article describes assist-as-needed sensor-based shared control methods relying on the blending of BCI and depth-sensor-based control. The proposed assistance targets the BCI-teleoperation of effectors for tasks that answer mobility and manipulation needs in a at-home context. Main Results. The assistance provided by the proposed methods was evaluated through a wheelchair mobility and reach-and-grasp laboratory-based experiments in a controlled environment, as part of a clinical trial with a quadriplegic patient implanted with a wireless 64-channel ElectroCorticoGram (ECoG) recording implant named WIMAGINE. Results showed that the proposed methods can assist BCI users in both tasks. Indeed, the time to perform the tasks and the number of changes of mental tasks were reduced. Moreover, unwanted actions, such as wheelchair collisions with the environment, and gripper opening that could result in the fall of the object were avoided. Significance. The proposed methods are steps toward at-home use of BCI-teleoperated assistive robots. Indeed, the proposed shared control methods improved the performance of the two assistive devices. Clinical trial, registration number: NCT02550522.
- 24 January 2025
- Published by IOP Publishing in Journal of Neural Engineering
- Vol. 22 (1)
Open AccessDepth-sensor-based shared control assistance for mobility and object manipulation: toward long-term home-use of BCI-controlled assistive robotic devices
Objective. Assistive robots can be developed to restore or provide more autonomy for individuals with motor impairments. In particular, power wheelchairs can compensate lower-limb impairments, while robotic manipulators can compensate upper-limbs impairments. Recent studies have shown that Brain-Computer Interfaces (BCI) can be used to operate this type of devices. However, activities of daily living and long-term use in real-life contexts such as home require robustness and adaptability to complex, changing and cluttered environments which can be problematic given the neural signals that do not always allow a safe and efficient use. Approach. This article describes assist-as-needed sensor-based shared control methods relying on the blending of BCI and depth-sensor-based control. The proposed assistance targets the BCI-teleoperation of effectors for tasks that answer mobility and manipulation needs in a at-home context. Main Results. The assistance provided by the proposed methods was evaluated through a wheelchair mobility and reach-and-grasp laboratory-based experiments in a controlled environment, as part of a clinical trial with a quadriplegic patient implanted with a wireless 64-channel ElectroCorticoGram (ECoG) recording implant named WIMAGINE. Results showed that the proposed methods can assist BCI users in both tasks. Indeed, the time to perform the tasks and the number of changes of mental tasks were reduced. Moreover, unwanted actions, such as wheelchair collisions with the environment, and gripper opening that could result in the fall of the object were avoided. Significance. The proposed methods are steps toward at-home use of BCI-teleoperated assistive robots. Indeed, the proposed shared control methods improved the performance of the two assistive devices. Clinical trial, registration number: NCT02550522.
- 9 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (3) , 4261-4272
Parametric Foam-Like Capacitive Sensors for 3-D Printing of Deformable Parts With Sensing Capabilities
Additive manufacturing paves the way for augmenting parts with sensors fabricated in-situ, i.e. directly within the part, using functional materials deposited at the same time as the structural materials. However, achieving this goal at low cost remains challenging. This paper investigates the design of parametric capacitive sensors that can be embedded in complex designs. The sensors can be manufactured on multi-material extrusion 3D printers using commercially available non-conductive and conductive thermoplastic polyurethane. The proposed sensor consists of a parameterized foam-like structure sandwiched between two conductive plates. This allows the designer to tune both the mechanical and capacitive responses of the sensor. The effect of changing the parameters of the foam-like structure on the sensor behavior is investigated. The parametric sensors are embedded in complex parts, creating a pressure-sensitive push-button, a gamepad and an analog joystick. Conductive traces and shields are directly integrated within the components, alongside all the structural elements that form the designs. The devices are fully functional immediately after fabrication, requiring no additional processing or assembly.
- 9 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (3) , 4261-4272
Parametric Foam-Like Capacitive Sensors for 3-D Printing of Deformable Parts With Sensing Capabilities
Additive manufacturing paves the way for augmenting parts with sensors fabricated in-situ, i.e. directly within the part, using functional materials deposited at the same time as the structural materials. However, achieving this goal at low cost remains challenging. This paper investigates the design of parametric capacitive sensors that can be embedded in complex designs. The sensors can be manufactured on multi-material extrusion 3D printers using commercially available non-conductive and conductive thermoplastic polyurethane. The proposed sensor consists of a parameterized foam-like structure sandwiched between two conductive plates. This allows the designer to tune both the mechanical and capacitive responses of the sensor. The effect of changing the parameters of the foam-like structure on the sensor behavior is investigated. The parametric sensors are embedded in complex parts, creating a pressure-sensitive push-button, a gamepad and an analog joystick. Conductive traces and shields are directly integrated within the components, alongside all the structural elements that form the designs. The devices are fully functional immediately after fabrication, requiring no additional processing or assembly.
- 3 November 2024
- Published by Springer Nature
- p. 251-263
Multi-actuator Haptic Handle Using Soft Material for Vibration Isolation
- 3 November 2024
- Published by Springer Nature
- p. 251-263
Multi-actuator Haptic Handle Using Soft Material for Vibration Isolation
- 3 November 2024
- Published by Springer Nature
- p. 391-404
Do Vibrotactile Patterns on both Hands Improve Guided Navigation with a Walker?
- 3 November 2024
- Published by Springer Nature
- p. 391-404
Do Vibrotactile Patterns on both Hands Improve Guided Navigation with a Walker?
- 3 November 2024
- Published by Springer Nature
- p. 224-236
Design of Haptic Rendering Techniques for Navigating with a Multi-actuator Vibrotactile Handle
- 3 November 2024
- Published by Springer Nature
- p. 224-236
Design of Haptic Rendering Techniques for Navigating with a Multi-actuator Vibrotactile Handle
- Open Access
- 9 October 2024
- Published by Association for Computing Machinery (ACM)
- p. 1-12
Wheelchair Proxemics: interpersonal behaviour between pedestrians and power wheelchair drivers in real and virtual environments
Immersive environments provide opportunities to learn and transfer skills to real life. This opens up new areas of application, such as rehabilitation, where people with neurological disabilities can learn to drive a power wheelchair (PWC) through the development of immersive simulators. To expose these specific users to daily-life study interaction situations, it is important to ensure realistic interactions with the virtual humans that populate the simulated environment, as PWC users should learn to drive and navigate under everyday conditions. While non-verbal pedestrian-pedestrian interactions have been extensively studied, understanding pedestrian-PWC user interactions during locomotion is still an open research area. Our study aimed to investigate the regulation of interpersonal distance (i.e., proxemics) between a pedestrian and a PWC user in real and virtual situations. We designed 2 experiments in which 1) participants had to reach a goal by walking (respectively driving a PWC) and avoid a static PWC confederate (respectively a standing confederate) and 2) participants had to walk to a goal and avoid a static confederate seated on a PWC in real and virtual conditions. Our results showed that interpersonal distances were significantly different whether the pedestrian avoided the PWC user or vice versa. We also showed an influence of the orientation of the person to be avoided. We discuss these findings with respect to pedestrian-pedestrian interactions, as well as their implications for the design of virtual humans interacting with PWC users for rehabilitation applications. In particular, we proposed a proof of concept by adapting existing microscopic crowd simulation algorithms to consider the specificity of pedestrian-PWC user interactions.
- 9 October 2024
- Published by Association for Computing Machinery (ACM)
- p. 1-12
Open AccessWheelchair Proxemics: interpersonal behaviour between pedestrians and power wheelchair drivers in real and virtual environments
Immersive environments provide opportunities to learn and transfer skills to real life. This opens up new areas of application, such as rehabilitation, where people with neurological disabilities can learn to drive a power wheelchair (PWC) through the development of immersive simulators. To expose these specific users to daily-life study interaction situations, it is important to ensure realistic interactions with the virtual humans that populate the simulated environment, as PWC users should learn to drive and navigate under everyday conditions. While non-verbal pedestrian-pedestrian interactions have been extensively studied, understanding pedestrian-PWC user interactions during locomotion is still an open research area. Our study aimed to investigate the regulation of interpersonal distance (i.e., proxemics) between a pedestrian and a PWC user in real and virtual situations. We designed 2 experiments in which 1) participants had to reach a goal by walking (respectively driving a PWC) and avoid a static PWC confederate (respectively a standing confederate) and 2) participants had to walk to a goal and avoid a static confederate seated on a PWC in real and virtual conditions. Our results showed that interpersonal distances were significantly different whether the pedestrian avoided the PWC user or vice versa. We also showed an influence of the orientation of the person to be avoided. We discuss these findings with respect to pedestrian-pedestrian interactions, as well as their implications for the design of virtual humans interacting with PWC users for rehabilitation applications. In particular, we proposed a proof of concept by adapting existing microscopic crowd simulation algorithms to consider the specificity of pedestrian-PWC user interactions.
- 7 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Letters
- Vol. 8 (9) , 1-4
Multi-Material Torque Sensor Embedding One-Shot 3D-Printed Deformable Capacitive Structures
Measuring interaction forces between robots and humans is a major challenge in physical human–robot interactions. Nowadays, conventional force/torque sensors suffer from bulkiness, high cost, and stiffness, which limit their use in soft robotics. Thus, we introduce a novel torque sensor manufactured with material extrusion technology. Our approach relies on capacitive structures, which are at the same time the deformable and sensing parts of the sensor, making it very compact. These structures are made in one single print, simplifying the manufacturing process compared to traditional torque sensors. The sensor characteristics can be modulated thanks to material extrusion technology. We conduct experiments in a dedicated test bench to characterize the proposed torque sensor. From the characterization results, we implement a torque estimator based on the deformation angle estimate calculated from capacitance changes. The proposed torque sensor is able to measure torques within a $\pm$ 2.5 N $\cdot$ m range with a maximum error of 6% up to a deformation angle velocity of $\text {35}^{\circ }/\text{s}$ . It is also able to measure its deformation angle with a maximum error of $\text {0.4}^{\circ }$ . The accuracy of our sensor makes it suitable to ensure fine control in physical human–robot interaction applications.
- 7 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Letters
- Vol. 8 (9) , 1-4
Multi-Material Torque Sensor Embedding One-Shot 3D-Printed Deformable Capacitive Structures
Measuring interaction forces between robots and humans is a major challenge in physical human–robot interactions. Nowadays, conventional force/torque sensors suffer from bulkiness, high cost, and stiffness, which limit their use in soft robotics. Thus, we introduce a novel torque sensor manufactured with material extrusion technology. Our approach relies on capacitive structures, which are at the same time the deformable and sensing parts of the sensor, making it very compact. These structures are made in one single print, simplifying the manufacturing process compared to traditional torque sensors. The sensor characteristics can be modulated thanks to material extrusion technology. We conduct experiments in a dedicated test bench to characterize the proposed torque sensor. From the characterization results, we implement a torque estimator based on the deformation angle estimate calculated from capacitance changes. The proposed torque sensor is able to measure torques within a $\pm$ 2.5 N $\cdot$ m range with a maximum error of 6% up to a deformation angle velocity of $\text {35}^{\circ }/\text{s}$ . It is also able to measure its deformation angle with a maximum error of $\text {0.4}^{\circ }$ . The accuracy of our sensor makes it suitable to ensure fine control in physical human–robot interaction applications.
- 8 September 2023
- Published by Taylor & Francis in Disability and Rehabilitation: Assistive Technology
- Vol. 19 (5) , 1907-1915
SWADAPT2: benefits of a collision avoidance assistance for powered wheelchair users in driving difficulty
In France, tens of thousands of people use a wheelchair. Driving powered wheelchairs (PWCs) present risks for users and their families. The risk of collision in PWC driver increases with severity of disability and may reduce their independence to drive. The European ADAPT project has developed a robotic assistance add-on for PWCs to prevent collisions and improve their driving performance. The aim of the SWADAPT2 study is to assess the benefit of this robotic assistance add-on arranged on a Standard Quickie Salsa M2 PWC in a population of PWC drivers with neurological disorders and driving difficulties. Eighteen (18) participants tested the system on three circuits of increasing difficulty, with and without the robotic assistance add-on. The benefit of the robotic assistance add-on was important especially on the more difficult circuits without impacting cognitive load or driving speed. The number of collisions was significantly reduced when using robotic assistance add-on from 2.16 to 0.36 on circuit 2 (p = 0.009) and from 7.3 to 1.33 on circuit 3 (p = 0.0009). Task load demand was not increased with the assistance. Finally, this system seems to be indicated to assist and improve driving safety for PWC drivers in driving difficulty. Evaluation was performed in controlled environments; therefore, further evaluation in real-world scenarios is needed to reach technology readiness.
- 8 September 2023
- Published by Taylor & Francis in Disability and Rehabilitation: Assistive Technology
- Vol. 19 (5) , 1907-1915
SWADAPT2: benefits of a collision avoidance assistance for powered wheelchair users in driving difficulty
In France, tens of thousands of people use a wheelchair. Driving powered wheelchairs (PWCs) present risks for users and their families. The risk of collision in PWC driver increases with severity of disability and may reduce their independence to drive. The European ADAPT project has developed a robotic assistance add-on for PWCs to prevent collisions and improve their driving performance. The aim of the SWADAPT2 study is to assess the benefit of this robotic assistance add-on arranged on a Standard Quickie Salsa M2 PWC in a population of PWC drivers with neurological disorders and driving difficulties. Eighteen (18) participants tested the system on three circuits of increasing difficulty, with and without the robotic assistance add-on. The benefit of the robotic assistance add-on was important especially on the more difficult circuits without impacting cognitive load or driving speed. The number of collisions was significantly reduced when using robotic assistance add-on from 2.16 to 0.36 on circuit 2 (p = 0.009) and from 7.3 to 1.33 on circuit 3 (p = 0.0009). Task load demand was not increased with the assistance. Finally, this system seems to be indicated to assist and improve driving safety for PWC drivers in driving difficulty. Evaluation was performed in controlled environments; therefore, further evaluation in real-world scenarios is needed to reach technology readiness.
- 24 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Visualization and Computer Graphics
- Vol. 30 (8) , 4767-4779
Does Multi-Actuator Vibrotactile Feedback Within Tangible Objects Enrich VR Manipulation?
Rich, informative and realistic haptic feedback is key to enhancing Virtual Reality (VR) manipulation. Tangible objects provide convincing grasping and manipulation interactions with haptic feedback of e.g., shape, mass and texture properties. But these properties are static, and cannot respond to interactions in the virtual environment. On the other hand, vibrotactile feedback provides the opportunity for delivering dynamic cues rendering many different contact properties, such as impacts, object vibrations or textures. Handheld objects or controllers in VR are usually restricted to vibrating in a monolithic fashion. In this article, we investigate how spatialiazing vibrotactile cues within handheld tangibles could enable a wider range of sensations and interactions. We conduct a set of perception studies, investigating the extent to which spatialization of vibrotactile feedback within tangible objects is possible as well as the benefits of proposed rendering schemes leveraging multiple actuators in VR. Results show that vibrotactile cues from localized actuators can be discriminated and are beneficial for certain rendering schemes.
- 24 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Visualization and Computer Graphics
- Vol. 30 (8) , 4767-4779
Does Multi-Actuator Vibrotactile Feedback Within Tangible Objects Enrich VR Manipulation?
Rich, informative and realistic haptic feedback is key to enhancing Virtual Reality (VR) manipulation. Tangible objects provide convincing grasping and manipulation interactions with haptic feedback of e.g., shape, mass and texture properties. But these properties are static, and cannot respond to interactions in the virtual environment. On the other hand, vibrotactile feedback provides the opportunity for delivering dynamic cues rendering many different contact properties, such as impacts, object vibrations or textures. Handheld objects or controllers in VR are usually restricted to vibrating in a monolithic fashion. In this article, we investigate how spatialiazing vibrotactile cues within handheld tangibles could enable a wider range of sensations and interactions. We conduct a set of perception studies, investigating the extent to which spatialization of vibrotactile feedback within tangible objects is possible as well as the benefits of proposed rendering schemes leveraging multiple actuators in VR. Results show that vibrotactile cues from localized actuators can be discriminated and are beneficial for certain rendering schemes.