Sajjad Mohammadi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sajjad Mohammadi has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- James L. Kirtley
Massachusetts Institute of Technology, Cambridge, MA, USA
11 shared publications - Gholamreza Davarpanah
Department of Electrical Engineering, Amirkabir University of Technology, Tehran, Iran
6 shared publications - Jeffrey H. Lang
Department of Electrical Engineering and Computer Science, Massachusetts Institute of Technology, Cambridge, USA
6 shared publications James L. Kirtley
Massachusetts Institute of Technology Cambridge Massachusetts USA
2 shared publications- Jie Mei
Department of Electrical Engineering and Computer Science, Massachusetts Institute of Technology, Cambridge, MA, USA
2 shared publications William R. Benner
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 20 (1)
Modelling and Optimisation of a Halbach‐Array Linear Motor for Semiconductor Manufacturing Application
This paper presents the analytical modelling and design of a high‐acceleration double‐sided linear motor with an arbitrary Halbach array for lithography machines used in semiconductor manufacturing. The Halbach array, combined with a slotless stator, improves performance in terms of vibration, acoustic noise, and precision compared with slotted motors. Amperian current and magnetic charge models of permanent magnets are integrated into a hybrid analytical framework. Unlike conventional methods that treat magnets as source terms in Poisson's equations, the proposed approach reduces the problem to Laplace's equations by representing the magnets through boundary conditions. The magnetic fields and potentials in the different regions, along with machine quantities such as shear stress, force‐angle characteristics, force profile, attraction force, misalignment force, back‐EMF, and demagnetisation index are derived, comprehensively analysed, and validated against FEM results. To provide a broader modelling framework, two additional analytical models based on the solution of Poisson's equations in terms of scalar and vector potentials are also derived, compared, and analysed. Finally, the design optimisation and sensitivity analysis of a linear stage for lithography applications are discussed.
- 1 January 2026
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 20 (1)
Open AccessModelling and Optimisation of a Halbach‐Array Linear Motor for Semiconductor Manufacturing Application
This paper presents the analytical modelling and design of a high‐acceleration double‐sided linear motor with an arbitrary Halbach array for lithography machines used in semiconductor manufacturing. The Halbach array, combined with a slotless stator, improves performance in terms of vibration, acoustic noise, and precision compared with slotted motors. Amperian current and magnetic charge models of permanent magnets are integrated into a hybrid analytical framework. Unlike conventional methods that treat magnets as source terms in Poisson's equations, the proposed approach reduces the problem to Laplace's equations by representing the magnets through boundary conditions. The magnetic fields and potentials in the different regions, along with machine quantities such as shear stress, force‐angle characteristics, force profile, attraction force, misalignment force, back‐EMF, and demagnetisation index are derived, comprehensively analysed, and validated against FEM results. To provide a broader modelling framework, two additional analytical models based on the solution of Poisson's equations in terms of scalar and vector potentials are also derived, compared, and analysed. Finally, the design optimisation and sensitivity analysis of a linear stage for lithography applications are discussed.
- Open Access
Connected C-Core Hybrid SRMs for EV Applications
This paper proposes a new class of permanent magnet-assisted three-phase switched reluctance motors (PM-SRMs) designed to achieve significantly higher torque density for electric vehicle (EV) propulsion systems. Eight distinct motor topologies are systematically investigated, including a non-PM baseline design, three innovative PM arrangement strategies, and two optimized rotor/stator teeth configurations (22-pole and 26-pole variants). The study presents analytical models including magnetic equivalent circuits (MECs), detailed operating principles, and generalized design formulations that account for both electromagnetic and structural considerations. A key contribution is the introduction of the point-of-conversion (PoC) concept, which optimizes PM placement by minimizing magnetic path reluctance. Comparative analysis demonstrates torque density improvements over conventional SRMs and existing PM-assisted designs while maintaining structural robustness. Experimental validation confirms that the proposed 24/22 configuration with inter-phase PMs delivers higher torque per PM volume compared to state-of-the-art designs. The findings provide insights for EV motor designers seeking to balance performance, cost, and reliability.
Open AccessConnected C-Core Hybrid SRMs for EV Applications
This paper proposes a new class of permanent magnet-assisted three-phase switched reluctance motors (PM-SRMs) designed to achieve significantly higher torque density for electric vehicle (EV) propulsion systems. Eight distinct motor topologies are systematically investigated, including a non-PM baseline design, three innovative PM arrangement strategies, and two optimized rotor/stator teeth configurations (22-pole and 26-pole variants). The study presents analytical models including magnetic equivalent circuits (MECs), detailed operating principles, and generalized design formulations that account for both electromagnetic and structural considerations. A key contribution is the introduction of the point-of-conversion (PoC) concept, which optimizes PM placement by minimizing magnetic path reluctance. Comparative analysis demonstrates torque density improvements over conventional SRMs and existing PM-assisted designs while maintaining structural robustness. Experimental validation confirms that the proposed 24/22 configuration with inter-phase PMs delivers higher torque per PM volume compared to state-of-the-art designs. The findings provide insights for EV motor designers seeking to balance performance, cost, and reliability.
- Open Access
Topology Optimization in Three-Phase C-Core SRMs
This paper investigates the optimized combination of rotor and stator teeth in a three-phase switched reluctance motor featuring a connected C-core topology to attain a larger winding area and, thus, a higher electrical loading capability, leading to a higher torque density. The general formulation is discussed. Additionally, the shorter flux path within the design leads to a reduced core loss. The finite element method is employed in the design and field analysis. A comparison with a conventional motor shows the superiority of the proposed configuration. The optimized design is prototyped and tested. Both static and dynamic torques are extracted. A good correlation between simulation and experimental results is observed.
Open AccessTopology Optimization in Three-Phase C-Core SRMs
This paper investigates the optimized combination of rotor and stator teeth in a three-phase switched reluctance motor featuring a connected C-core topology to attain a larger winding area and, thus, a higher electrical loading capability, leading to a higher torque density. The general formulation is discussed. Additionally, the shorter flux path within the design leads to a reduced core loss. The finite element method is employed in the design and field analysis. A comparison with a conventional motor shows the superiority of the proposed configuration. The optimized design is prototyped and tested. Both static and dynamic torques are extracted. A good correlation between simulation and experimental results is observed.
- Open Access
A Novel Radial-Flux IPM Eddy-Current Coupler for Wind Generator Applications
A novel radial-flux eddy-current coupler with interior permanent magnets (IPM) is proposed, providing higher demagnetization tolerance, making it well-suited for applications with limited accessibility, such as offshore wind generation. Finite element analysis is employed in the design and derivation of coupler quantities. Finally, the coupler is prototyped to experimentally validate the design and the simulation results.
Open AccessA Novel Radial-Flux IPM Eddy-Current Coupler for Wind Generator Applications
A novel radial-flux eddy-current coupler with interior permanent magnets (IPM) is proposed, providing higher demagnetization tolerance, making it well-suited for applications with limited accessibility, such as offshore wind generation. Finite element analysis is employed in the design and derivation of coupler quantities. Finally, the coupler is prototyped to experimentally validate the design and the simulation results.
- Open Access
An Actuator with Magnetic Restoration, Part II: Drive Circuit and Control Loops
In part II, an op-amp-based drive is proposed and designed. Subsequently, a very accurate model for the drive circuit and the current loop is developed as a simulation platform, while its simplified version is derived, tailored for efficient design purposes. Through a comprehensive evaluation, the accuracy and efficacy of both the actuator and drive circuit modeling is scrutinized, showcasing their superiorities over existing approaches. The importance of eddy current modeling is underscored. Also, the effectiveness of the designed current loop and its practical trade-offs are engineered and discussed. Then, three DSP-based position control techniques are implemented: pole placement with voltage drive, pole placement with current drive, and nonlinear control with feed linearization. Both full-order and reduced-order observers are leveraged to estimate the unmeasured states. The performance of control designs across various applications are evaluated through indices such as rise time, overshoot, steady-state error, and large-signal tracking in the step response as well as bandwidth, robustness, phase margin, sensitivity, disturbance rejection, and noise rejection in the frequency domain. The distinctive features of implemented control strategy are compared, offering a nuanced discussion of their respective advantages and drawbacks, shedding light on their potential applications.
Open AccessAn Actuator with Magnetic Restoration, Part II: Drive Circuit and Control Loops
In part II, an op-amp-based drive is proposed and designed. Subsequently, a very accurate model for the drive circuit and the current loop is developed as a simulation platform, while its simplified version is derived, tailored for efficient design purposes. Through a comprehensive evaluation, the accuracy and efficacy of both the actuator and drive circuit modeling is scrutinized, showcasing their superiorities over existing approaches. The importance of eddy current modeling is underscored. Also, the effectiveness of the designed current loop and its practical trade-offs are engineered and discussed. Then, three DSP-based position control techniques are implemented: pole placement with voltage drive, pole placement with current drive, and nonlinear control with feed linearization. Both full-order and reduced-order observers are leveraged to estimate the unmeasured states. The performance of control designs across various applications are evaluated through indices such as rise time, overshoot, steady-state error, and large-signal tracking in the step response as well as bandwidth, robustness, phase margin, sensitivity, disturbance rejection, and noise rejection in the frequency domain. The distinctive features of implemented control strategy are compared, offering a nuanced discussion of their respective advantages and drawbacks, shedding light on their potential applications.
- Open Access
An Actuator with Magnetic Restoration, Part I: Electromechanical Model and Identification
Electromechanical models are crucial in the design and control of motors and actuators. Modeling, identification, drive, and current control loop of a limited-rotation actuator with magnetic restoration is presented. New nonlinear and linearized electromechanical models are developed for the design of the drive as well as small and large signal controls of the actuator. To attain a higher accuracy and an efficient design, and the eddy-currents in the laminations and magnet are modeled. This involves analytically solving 1-D and 2-D diffusion equations, leading to the derivation of a lumped-element circuit for system-level analyses, such as control system design. Additionally, the study analyzes and incorporates the impact of pre-sliding friction. The actuator is prototyped, and the paper delves into the identification of the model, presenting a procedure for parameter extraction. A close agreement is observed between the results obtained from the model, finite element analysis, and experimental results. The superiority of the proposed model over previous approaches is highlighted. Part II of the paper is dedicated to the drive circuit, the current control, as well as linear and nonlinear position control system designs.
Open AccessAn Actuator with Magnetic Restoration, Part I: Electromechanical Model and Identification
Electromechanical models are crucial in the design and control of motors and actuators. Modeling, identification, drive, and current control loop of a limited-rotation actuator with magnetic restoration is presented. New nonlinear and linearized electromechanical models are developed for the design of the drive as well as small and large signal controls of the actuator. To attain a higher accuracy and an efficient design, and the eddy-currents in the laminations and magnet are modeled. This involves analytically solving 1-D and 2-D diffusion equations, leading to the derivation of a lumped-element circuit for system-level analyses, such as control system design. Additionally, the study analyzes and incorporates the impact of pre-sliding friction. The actuator is prototyped, and the paper delves into the identification of the model, presenting a procedure for parameter extraction. A close agreement is observed between the results obtained from the model, finite element analysis, and experimental results. The superiority of the proposed model over previous approaches is highlighted. Part II of the paper is dedicated to the drive circuit, the current control, as well as linear and nonlinear position control system designs.
- 11 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 39 (4) , 2529-2542
An Actuator With Magnetic Restoration, Part I: Electromechanical Model and Identification
electromechanical models are crucial in the design and control of motors and actuators. Modeling, identification, drive, and current control loop of a limited-rotation actuator with magnetic restoration is presented. New nonlinear and linearized electromechanical models are developed for the design of the drive as well as small and large signal controls of the actuator. To attain a higher accuracy and an efficient design, and the eddy-currents in the laminations and magnet are modeled. This involves analytically solving 1-D and 2-D diffusion equations, leading to the derivation of a lumped-element circuit for system-level analyses, such as control system design. Additionally, the study analyzes and incorporates the impact of pre-sliding friction. The actuator is prototyped, and the paper delves into the identification of the model, presenting a procedure for parameter extraction. A close agreement is observed between the results obtained from the model, finite element analysis, and experimental results. The superiority of the proposed model over previous approaches is highlighted. Part II of the paper is dedicated to the drive circuit, the current control, as well as linear and nonlinear position control system designs.
- 11 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 39 (4) , 2529-2542
An Actuator With Magnetic Restoration, Part I: Electromechanical Model and Identification
electromechanical models are crucial in the design and control of motors and actuators. Modeling, identification, drive, and current control loop of a limited-rotation actuator with magnetic restoration is presented. New nonlinear and linearized electromechanical models are developed for the design of the drive as well as small and large signal controls of the actuator. To attain a higher accuracy and an efficient design, and the eddy-currents in the laminations and magnet are modeled. This involves analytically solving 1-D and 2-D diffusion equations, leading to the derivation of a lumped-element circuit for system-level analyses, such as control system design. Additionally, the study analyzes and incorporates the impact of pre-sliding friction. The actuator is prototyped, and the paper delves into the identification of the model, presenting a procedure for parameter extraction. A close agreement is observed between the results obtained from the model, finite element analysis, and experimental results. The superiority of the proposed model over previous approaches is highlighted. Part II of the paper is dedicated to the drive circuit, the current control, as well as linear and nonlinear position control system designs.
- 11 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 39 (4) , 2543-2558
An Actuator With Magnetic Restoration, Part II: Drive Circuit and Control Loops
In part II, an op-amp-based drive is proposed and designed. Subsequently, a very accurate model for the drive circuit and the current loop is developed as a simulation platform, while its simplified version is derived, tailored for efficient design purposes. Through a comprehensive evaluation, the accuracy and efficacy of both the actuator and drive circuit modeling is scrutinized, showcasing their superiorities over existing approaches. The importance of eddy current modeling is underscored. Also, the effectiveness of the designed current loop and its practical trade-offs are engineered and discussed. Then, three DSP-based position control techniques are implemented: pole placement with voltage drive, pole placement with current drive, and nonlinear control with feed linearization. Both full-order and reduced-order observers are leveraged to estimate the unmeasured states. The performance of control designs across various applications are evaluated through indices such as rise time, overshoot, steady-state error, and large-signal tracking in the step response as well as bandwidth, robustness, phase margin, sensitivity, disturbance rejection, and noise rejection in the frequency domain. The distinctive features of implemented control strategy are compared, offering a nuanced discussion of their respective advantages and drawbacks, shedding light on their potential applications.
- 11 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 39 (4) , 2543-2558
An Actuator With Magnetic Restoration, Part II: Drive Circuit and Control Loops
In part II, an op-amp-based drive is proposed and designed. Subsequently, a very accurate model for the drive circuit and the current loop is developed as a simulation platform, while its simplified version is derived, tailored for efficient design purposes. Through a comprehensive evaluation, the accuracy and efficacy of both the actuator and drive circuit modeling is scrutinized, showcasing their superiorities over existing approaches. The importance of eddy current modeling is underscored. Also, the effectiveness of the designed current loop and its practical trade-offs are engineered and discussed. Then, three DSP-based position control techniques are implemented: pole placement with voltage drive, pole placement with current drive, and nonlinear control with feed linearization. Both full-order and reduced-order observers are leveraged to estimate the unmeasured states. The performance of control designs across various applications are evaluated through indices such as rise time, overshoot, steady-state error, and large-signal tracking in the step response as well as bandwidth, robustness, phase margin, sensitivity, disturbance rejection, and noise rejection in the frequency domain. The distinctive features of implemented control strategy are compared, offering a nuanced discussion of their respective advantages and drawbacks, shedding light on their potential applications.
- 12 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 59 (2) , 1-14
Modeling of a Rotary Actuator Using Elliptical Coordinates and Differential Flux Tubes
Analytical models are useful in the design of electromagnetic devices. In this article, a model is developed for a rotary actuator whose stator curvature is elliptically shaped to have a reluctance torque that restores the rotor to the maximum torque per ampere position. The total torque is decomposed into the coil torque and a reluctance torque. The rotor is a permanent magnet represented by equivalent Amperian currents. The stator geometry is simplified to an ellipse having surface current densities at the interpolar regions that are equivalent to the stator currents. Then, the field solution within the ellipse is obtained using Laplace’s equation in elliptical coordinates so that the coil torque can be obtained by the Lorentz force. The reluctance torque is derived by the energy method and an approach referred to here as differential flux tubes, which is similar to the use of conventional flux tubes in magnetic equivalent circuits. A rotating reference frame on the rotor is also adopted to simplify the mathematics. The finite element method (FEM) is also used in the field analysis and development of the proposed model. Finally, the actuator is prototyped, and experimental results are employed to evaluate the results obtained from the analytical model and FEM.
- 12 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 59 (2) , 1-14
Modeling of a Rotary Actuator Using Elliptical Coordinates and Differential Flux Tubes
Analytical models are useful in the design of electromagnetic devices. In this article, a model is developed for a rotary actuator whose stator curvature is elliptically shaped to have a reluctance torque that restores the rotor to the maximum torque per ampere position. The total torque is decomposed into the coil torque and a reluctance torque. The rotor is a permanent magnet represented by equivalent Amperian currents. The stator geometry is simplified to an ellipse having surface current densities at the interpolar regions that are equivalent to the stator currents. Then, the field solution within the ellipse is obtained using Laplace’s equation in elliptical coordinates so that the coil torque can be obtained by the Lorentz force. The reluctance torque is derived by the energy method and an approach referred to here as differential flux tubes, which is similar to the use of conventional flux tubes in magnetic equivalent circuits. A rotating reference frame on the rotor is also adopted to simplify the mathematics. The finite element method (FEM) is also used in the field analysis and development of the proposed model. Finally, the actuator is prototyped, and experimental results are employed to evaluate the results obtained from the analytical model and FEM.
- 18 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 37 (2) , 1314-1323
A Self-Starting Technique for Two-Phase Switched Reluctance Motors
Special attention has been paid to two-phase switched reluctance motors (SRMs) as they have fewer power electronics components compared to three- or multi-phase ones. However, their main drawbacks are the lack of starting torque and a predetermined direction of rotation. This paper proposes a new self-starting technique for two-phase SRMs, which has superiorities over the previous approaches. In the proposed topology, the flux paths are shorter, and thus the required magnetomotive force is smaller, which reduces losses. The design procedure is explained. Two- and three-dimensional finite element method (FEM) is employed in the analysis. Also, the motor is prototyped, and two test setups for torque-angle measurement and control study are used. The dynamic behavior of the motor is studied applying single-pulse control and current hysteresis control strategies. The experimental results confirm the results obtained by FEM. Both simulation and experiment results confirm that the proposed topology offers higher efficiency, higher mean torque, and better dynamic behavior compared to two conventional SRMs.
- 18 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 37 (2) , 1314-1323
A Self-Starting Technique for Two-Phase Switched Reluctance Motors
Special attention has been paid to two-phase switched reluctance motors (SRMs) as they have fewer power electronics components compared to three- or multi-phase ones. However, their main drawbacks are the lack of starting torque and a predetermined direction of rotation. This paper proposes a new self-starting technique for two-phase SRMs, which has superiorities over the previous approaches. In the proposed topology, the flux paths are shorter, and thus the required magnetomotive force is smaller, which reduces losses. The design procedure is explained. Two- and three-dimensional finite element method (FEM) is employed in the analysis. Also, the motor is prototyped, and two test setups for torque-angle measurement and control study are used. The dynamic behavior of the motor is studied applying single-pulse control and current hysteresis control strategies. The experimental results confirm the results obtained by FEM. Both simulation and experiment results confirm that the proposed topology offers higher efficiency, higher mean torque, and better dynamic behavior compared to two conventional SRMs.