Linda J. Broadbelt
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Linda J. Broadbelt has a total of 409 co-authors. Here are the top co-authors by number of shared publications:
- Keith E. J. Tyo
Department of Chemical and Biological Engineering, Northwestern University, Evanston, IL, USA
14 shared publications - Randall Q. Snurr
Northwestern University
11 shared publications - Pavlo Kostetskyy
Archer Daniels Midland Company, 1001 N Brush College Road, Decatur, IL, 62521, USA
9 shared publications Ivan A. Konstantinov
The Dow Chemical Company 2301 N. Brazosport Blvd. Freeport TX 77541
8 shared publications- Justin M. Notestein
Northwestern University 2145 Sheridan Road
8 shared publications - Xiaoyang Liu
Northwestern University
8 shared publications
Latest Publications
- 5 November 2026
- Published by American Chemical Society (ACS) in ACS Applied Catalysis
Deciphering the Role of Solution-Phase Species in the Ring-Opening of Unsymmetric Epoxides by Ammonia – A Combination of Experimental Analysis and DFT-Informed Microkinetic Modeling
Alkanolamines, a group of versatile chemicals in gas treatment, personal care, metalworking, and coatings, are commonly synthesized through the ring opening of epoxides by amines. For unsymmetric epoxides, such as propylene oxide, aminolysis can generate multiple regioisomers and sequential secondary or tertiary amine products. In aqueous systems, this reaction network may be further complicated by the participation of solution-phase species, including water, ammonium ions, and alkanolamine products, which could influence reaction rates and selectivity through hydrogen bonding interactions. Here, we combined flow reactor kinetic measurements, explicit-solvation DFT calculations, and microkinetic modeling to investigate the ring opening of propylene oxide by ammonia in water. Experimental measurements across a broad range of initial conditions revealed unusual kinetic behavior with respect to water, including a low apparent activation energy and an apparent water order greater than two, suggesting the participation of multiple water molecules. These observations were used to guide the development of a detailed microkinetic model in which elementary step rate coefficients were informed by DFT calculations including explicit solution-phase species. These results indicate that, during the reaction, multiple water molecules lower the apparent activation energy by stabilizing the PO ring and bridging NH3 during ring opening, while other solution-phase species, including alkanolamine products, can also stabilize PO and contribute to product-assisted catalysis. More broadly, this work establishes a framework for connecting flow reactor kinetics with molecular-scale modeling to understand complex liquid-phase reaction networks involving explicit solvent and product participation.
- 5 November 2026
- Published by American Chemical Society (ACS) in ACS Applied Catalysis
Deciphering the Role of Solution-Phase Species in the Ring-Opening of Unsymmetric Epoxides by Ammonia – A Combination of Experimental Analysis and DFT-Informed Microkinetic Modeling
Alkanolamines, a group of versatile chemicals in gas treatment, personal care, metalworking, and coatings, are commonly synthesized through the ring opening of epoxides by amines. For unsymmetric epoxides, such as propylene oxide, aminolysis can generate multiple regioisomers and sequential secondary or tertiary amine products. In aqueous systems, this reaction network may be further complicated by the participation of solution-phase species, including water, ammonium ions, and alkanolamine products, which could influence reaction rates and selectivity through hydrogen bonding interactions. Here, we combined flow reactor kinetic measurements, explicit-solvation DFT calculations, and microkinetic modeling to investigate the ring opening of propylene oxide by ammonia in water. Experimental measurements across a broad range of initial conditions revealed unusual kinetic behavior with respect to water, including a low apparent activation energy and an apparent water order greater than two, suggesting the participation of multiple water molecules. These observations were used to guide the development of a detailed microkinetic model in which elementary step rate coefficients were informed by DFT calculations including explicit solution-phase species. These results indicate that, during the reaction, multiple water molecules lower the apparent activation energy by stabilizing the PO ring and bridging NH3 during ring opening, while other solution-phase species, including alkanolamine products, can also stabilize PO and contribute to product-assisted catalysis. More broadly, this work establishes a framework for connecting flow reactor kinetics with molecular-scale modeling to understand complex liquid-phase reaction networks involving explicit solvent and product participation.
- 22 October 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (43) , 22814-22824
Mechanistic Modeling of the Thermal Degradation of Hydroxyl-Containing Polymers: Part 2 – Product Distribution, Reaction Pathways, and Rates
In the first part of this series of manuscripts, the focus was on discovering and delineating families of elementary step reactions and describing how the method of moments and the use of deterministically arranged dyad probabilities can be implemented within a population balance model to describe the thermal deconstruction of hydroxy-containing polymers. In this part, the results from the simulation of the pyrolysis of poly(vinyl alcohol) (PVA) and ethylene vinyl alcohol (EVOH) are compared to experimental thermogravimetric analysis and pyrolysis data obtained by carrying out using a micropyrolyzer coupled to two-dimensional chromatography, along with flame ionization and time-of-flight mass spectrometer detectors (Py–GC×GC–FID/TOF–MS). Both the PVA and EVOH models, using a heating rate of 10 °C min–1, were able to replicate experimentally determined mass-loss curves. In doing so, the difference in onset temperatures between the thermal deconstruction of PVA and EVOH was revealed to be the result of ethyl comonomers in EVOH chains inhibiting the rapid end-chain unzipping chemistries observed in PVA. Additionally, at low pyrolysis isothermal temperatures (340 and 360 °C), the EVOH model was able to reproduce the partial conversion yields of four major linear products, ethanal, 2-butenal, propene, and acetone, identifying the underlying chemical reactions that govern the thermal degradations of these polymers. After validating the model, net rate analysis was used to identify the major pathways for degradation in the PVA and EVOH systems, namely, assisted 1,2-dehydration, Grob-type 1,3-diol fragmentation, retro-aldol and (non)-adjacent retro-ene reactions. Lastly, to highlight the capabilities of this novel methodological framework and the reaction families at the elementary step level that it contains, this work further quantified the sensitivity of the degradation systems to backbone impurities and differing comonomer concentrations. With the successful validation of these models, this study has demonstrated a novel method of tracking the evolution of midchain topology probabilistically, expanding the suite of polymer pyrolysis systems that can be modeled using the method of moments, and presents the most detailed models of PVA and EVOH pyrolysis to date.
- 22 October 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (43) , 22814-22824
Mechanistic Modeling of the Thermal Degradation of Hydroxyl-Containing Polymers: Part 2 – Product Distribution, Reaction Pathways, and Rates
In the first part of this series of manuscripts, the focus was on discovering and delineating families of elementary step reactions and describing how the method of moments and the use of deterministically arranged dyad probabilities can be implemented within a population balance model to describe the thermal deconstruction of hydroxy-containing polymers. In this part, the results from the simulation of the pyrolysis of poly(vinyl alcohol) (PVA) and ethylene vinyl alcohol (EVOH) are compared to experimental thermogravimetric analysis and pyrolysis data obtained by carrying out using a micropyrolyzer coupled to two-dimensional chromatography, along with flame ionization and time-of-flight mass spectrometer detectors (Py–GC×GC–FID/TOF–MS). Both the PVA and EVOH models, using a heating rate of 10 °C min–1, were able to replicate experimentally determined mass-loss curves. In doing so, the difference in onset temperatures between the thermal deconstruction of PVA and EVOH was revealed to be the result of ethyl comonomers in EVOH chains inhibiting the rapid end-chain unzipping chemistries observed in PVA. Additionally, at low pyrolysis isothermal temperatures (340 and 360 °C), the EVOH model was able to reproduce the partial conversion yields of four major linear products, ethanal, 2-butenal, propene, and acetone, identifying the underlying chemical reactions that govern the thermal degradations of these polymers. After validating the model, net rate analysis was used to identify the major pathways for degradation in the PVA and EVOH systems, namely, assisted 1,2-dehydration, Grob-type 1,3-diol fragmentation, retro-aldol and (non)-adjacent retro-ene reactions. Lastly, to highlight the capabilities of this novel methodological framework and the reaction families at the elementary step level that it contains, this work further quantified the sensitivity of the degradation systems to backbone impurities and differing comonomer concentrations. With the successful validation of these models, this study has demonstrated a novel method of tracking the evolution of midchain topology probabilistically, expanding the suite of polymer pyrolysis systems that can be modeled using the method of moments, and presents the most detailed models of PVA and EVOH pyrolysis to date.
- Open Access
- 21 October 2026
- Published by American Chemical Society (ACS) in ACS Engineering Au
- Vol. 6 (5) , 578-579
AI and Machine Learning: Fundamental and Applied Breakthroughs
- 21 October 2026
- Published by American Chemical Society (ACS) in ACS Engineering Au
- Vol. 6 (5) , 578-579
Open AccessAI and Machine Learning: Fundamental and Applied Breakthroughs
- 13 October 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (42) , 22472-22485
Mechanistic Modeling of the Thermal Degradation of Hydroxyl-Containing Polymers. Part 1: Mechanism and Model Development
In part one of this two-part series, the method of moments (MoM) modeling framework for describing the complex chemistry of polymer decomposition is expanded to capture the evolving mid-chain topology of functionalized polymers, expanding the suite of depolymerization chemistries that can be described with MoM. This has been achieved by tracking the evolution of deterministically arranged dyad (DAD) concentrations as reactions consume and produce functional groups stoichiometrically. Additionally, reaction site probabilities are calculated using the ratios of concentrations of different DAD types, allowing reaction rates to be a function of the average structure in addition to temperature and species concentration. Two models were constructed, one for the pyrolysis of a homopolymer, poly(vinyl alcohol) (PVA), and another for the pyrolysis of a related copolymer, ethylene vinyl alcohol (EVOH), to demonstrate the robustness of this approach. This work demonstrates both the wide applicability of this methodology as well as the importance of including the influence of evolving polymer structure on the competing degradation chemistries that govern the depolymerization of these systems. This first installment focuses on uncovering the specific mechanistic pathways by which PVA and EVOH decompose under pyrolytic conditions, the generalized method for initializing and tracking the evolution of DADs, and the calculation of the expected concentrations of the reaction sites.
- 13 October 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (42) , 22472-22485
Mechanistic Modeling of the Thermal Degradation of Hydroxyl-Containing Polymers. Part 1: Mechanism and Model Development
In part one of this two-part series, the method of moments (MoM) modeling framework for describing the complex chemistry of polymer decomposition is expanded to capture the evolving mid-chain topology of functionalized polymers, expanding the suite of depolymerization chemistries that can be described with MoM. This has been achieved by tracking the evolution of deterministically arranged dyad (DAD) concentrations as reactions consume and produce functional groups stoichiometrically. Additionally, reaction site probabilities are calculated using the ratios of concentrations of different DAD types, allowing reaction rates to be a function of the average structure in addition to temperature and species concentration. Two models were constructed, one for the pyrolysis of a homopolymer, poly(vinyl alcohol) (PVA), and another for the pyrolysis of a related copolymer, ethylene vinyl alcohol (EVOH), to demonstrate the robustness of this approach. This work demonstrates both the wide applicability of this methodology as well as the importance of including the influence of evolving polymer structure on the competing degradation chemistries that govern the depolymerization of these systems. This first installment focuses on uncovering the specific mechanistic pathways by which PVA and EVOH decompose under pyrolytic conditions, the generalized method for initializing and tracking the evolution of DADs, and the calculation of the expected concentrations of the reaction sites.
- 30 September 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (40) , 21460-21499
Atoms to Processes: The Role of Artificial Intelligence and Machine Learning in Chemical Engineering
The rapid maturation of artificial intelligence (AI) and machine learning (ML) has catalyzed a profound shift in how chemical engineering problems are formulated, analyzed, and solved. Advances in computing, data availability, and learning algorithms have enabled AI/ML methods to impact applications spanning atomic-scale simulations, materials and catalyst discovery, transport and thermodynamics, separations, process systems engineering, and industrial operations. This Perspective provides an account of recent methodological developments and representative applications, emphasizing how AI/ML tools are being integrated with first-principles models to address challenges of predictive accuracy, data scarcity, extrapolation, interpretability, and model life cycle management. Across domains, a unifying trend is the move away from purely black-box approaches toward hybrid and physics-informed frameworks that explicitly respect conservation laws, thermodynamic consistency, and known structural constraints. These approaches not only improve robustness and reliability but also enable meaningful human–AI collaboration by providing information at an appropriate level of abstraction for the task and decision context. We conclude that AI and ML are not replacing the core principles of chemical engineering; rather, they are amplifying them. As the field advances toward increasingly autonomous, adaptive, and sustainable systems, the thoughtful integration of AI/ML with first-principles understanding and domain expertise will be essential to realizing their full potential across both research and industrial practice.
- 30 September 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (40) , 21460-21499
Atoms to Processes: The Role of Artificial Intelligence and Machine Learning in Chemical Engineering
The rapid maturation of artificial intelligence (AI) and machine learning (ML) has catalyzed a profound shift in how chemical engineering problems are formulated, analyzed, and solved. Advances in computing, data availability, and learning algorithms have enabled AI/ML methods to impact applications spanning atomic-scale simulations, materials and catalyst discovery, transport and thermodynamics, separations, process systems engineering, and industrial operations. This Perspective provides an account of recent methodological developments and representative applications, emphasizing how AI/ML tools are being integrated with first-principles models to address challenges of predictive accuracy, data scarcity, extrapolation, interpretability, and model life cycle management. Across domains, a unifying trend is the move away from purely black-box approaches toward hybrid and physics-informed frameworks that explicitly respect conservation laws, thermodynamic consistency, and known structural constraints. These approaches not only improve robustness and reliability but also enable meaningful human–AI collaboration by providing information at an appropriate level of abstraction for the task and decision context. We conclude that AI and ML are not replacing the core principles of chemical engineering; rather, they are amplifying them. As the field advances toward increasingly autonomous, adaptive, and sustainable systems, the thoughtful integration of AI/ML with first-principles understanding and domain expertise will be essential to realizing their full potential across both research and industrial practice.
- 9 September 2026
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (18) , 9986-9998
Understanding Polymer Zip Length through the Lens of Mechanistic Modeling
Zip length, or the number of monomers released between initiation of depolymerization and loss of the depropagating radical species via termination and/or transfer, is a key metric for assessing the kinetic recyclability of a polymer, with higher values indicating greater potential for monomer recovery. In the context of radical depolymerization, mechanism-dependent analytical zip length expressions have been derived as a function of kinetic rate coefficients, molecular weight, density, and temperature; continuum models based on the method of moments (MoM) reproduce these expressions because they share the same underlying assumptions. However, we demonstrate that these analytical expressions do not accurately reflect the true zip length under typical conditions due to the accumulation of monomer radicals that cannot undergo further depropagation. To investigate this phenomenon, we compared two kinetic modeling approaches, kinetic Monte Carlo (KMC) and population balance modeling with the MoM, across a broad parameter space spanning two initiation mechanisms, multiple kinetic parameter sets, and a range of initial chain lengths and dispersities. The relationship between initial chain length and simulated zip length is not a simple threshold comparison but rather depends on the ratio of the initial degree of polymerization to zip length, the initiation mechanism, and the kinetic parameter set, which we have quantified using a dimensionless value we term “scaled kinetics of zip length”, or the Skoz number. We then apply an expanded KMC model with kinetic parameters derived from DFT calculations to poly(diethyl muconate), a recently developed recyclable polyolefin system with a mechanism akin to those analyzed, demonstrating how a mechanistically grounded understanding of zip length, including its evolution during depolymerization and its dependence on initiation barrier, can guide the rational design of kinetically recyclable polymers.
- 9 September 2026
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (18) , 9986-9998
Understanding Polymer Zip Length through the Lens of Mechanistic Modeling
Zip length, or the number of monomers released between initiation of depolymerization and loss of the depropagating radical species via termination and/or transfer, is a key metric for assessing the kinetic recyclability of a polymer, with higher values indicating greater potential for monomer recovery. In the context of radical depolymerization, mechanism-dependent analytical zip length expressions have been derived as a function of kinetic rate coefficients, molecular weight, density, and temperature; continuum models based on the method of moments (MoM) reproduce these expressions because they share the same underlying assumptions. However, we demonstrate that these analytical expressions do not accurately reflect the true zip length under typical conditions due to the accumulation of monomer radicals that cannot undergo further depropagation. To investigate this phenomenon, we compared two kinetic modeling approaches, kinetic Monte Carlo (KMC) and population balance modeling with the MoM, across a broad parameter space spanning two initiation mechanisms, multiple kinetic parameter sets, and a range of initial chain lengths and dispersities. The relationship between initial chain length and simulated zip length is not a simple threshold comparison but rather depends on the ratio of the initial degree of polymerization to zip length, the initiation mechanism, and the kinetic parameter set, which we have quantified using a dimensionless value we term “scaled kinetics of zip length”, or the Skoz number. We then apply an expanded KMC model with kinetic parameters derived from DFT calculations to poly(diethyl muconate), a recently developed recyclable polyolefin system with a mechanism akin to those analyzed, demonstrating how a mechanistically grounded understanding of zip length, including its evolution during depolymerization and its dependence on initiation barrier, can guide the rational design of kinetically recyclable polymers.
- Open Access
- 30 August 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (17) , e202502727
Mechanistic Insights Into the Thermal Pyrolysis of Branched Polyolefins Using Kinetic Modeling
We present a detailed mechanistic analysis of thermal pyrolysis of linear and branched polyolefins. The pyrolytic pathways in high‐density polyethylene (HDPE), polypropylene (PP), and linear low‐density polyethylene (LLDPE) are compared. The mechanistic model for LLDPE is newly developed, based on the population balance approach incorporating reactions on the branches as well as the main chain. Specific reactions are unfurled based on a compact number of reaction families, each of which is governed by a structure/reactivity relationship to specify the activation energy of individual reactions and statistical mechanical estimates to quantify the Arrhenius pre‐factor. The results from the model for LLDPE are compared to new data collected from micropyrolysis experiments that quantify detailed temporal product distributions. PP is confirmed as the most reactive of the three polymers, making the highest amount of low molecular weight products at a given time. For LLDPE, branches serve as positions for hydrogen abstraction, opening up new pathways for deconstructing the main chain. The length of the branches in LLDPE is shown to influence the degradation rate. Understanding the connection between structure and reactivity can help design polymer topologies and pyrolysis reaction conditions to optimize the recycling process and thus the product yields and selectivities.
- 30 August 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (17) , e202502727
Open AccessMechanistic Insights Into the Thermal Pyrolysis of Branched Polyolefins Using Kinetic Modeling
We present a detailed mechanistic analysis of thermal pyrolysis of linear and branched polyolefins. The pyrolytic pathways in high‐density polyethylene (HDPE), polypropylene (PP), and linear low‐density polyethylene (LLDPE) are compared. The mechanistic model for LLDPE is newly developed, based on the population balance approach incorporating reactions on the branches as well as the main chain. Specific reactions are unfurled based on a compact number of reaction families, each of which is governed by a structure/reactivity relationship to specify the activation energy of individual reactions and statistical mechanical estimates to quantify the Arrhenius pre‐factor. The results from the model for LLDPE are compared to new data collected from micropyrolysis experiments that quantify detailed temporal product distributions. PP is confirmed as the most reactive of the three polymers, making the highest amount of low molecular weight products at a given time. For LLDPE, branches serve as positions for hydrogen abstraction, opening up new pathways for deconstructing the main chain. The length of the branches in LLDPE is shown to influence the degradation rate. Understanding the connection between structure and reactivity can help design polymer topologies and pyrolysis reaction conditions to optimize the recycling process and thus the product yields and selectivities.
- Open Access
- 14 July 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (29) , 13136-13155
Optimal Pathways from Alternative Carbon Feedstocks to Organic Commodity Chemicals
The use of biogenic and waste feedstocks is a promising strategy to improve the chemical sector’s supply chain resiliency and carbon intensity. To help inform research efforts that transform these feedstocks into industrial chemicals, we used a systematic analysis framework to consistently evaluate the economics and environmental impacts of >200 alternative production pathways for 51 organic commodity chemicals in the United States under an optimistic future scenario that reflects the potential upper bounds of process scalability, energy availability, and carbon uptake. Lower-impact and lower-cost alternative pathways were identified for all but three chemicals, with 75% using thermochemical routes and half leveraging existing manufacturing infrastructure. Scenario analysis shows that the ranking of these pathways for half of the assessed chemicals is particularly sensitive to carbon uptake assumptions and criteria prioritization (i.e., cost only, environmental impact only, or both), with changes in electricity grid mix, hydrogen source, and underlying mass and energy flow data proving less influential. Implementing alternative pathways for just 11 chemicals could support a transition to net-zero greenhouse gas emissions from chemical production by 2050, with 11% lower cost than business as usual, similar water requirements, quadrupled electricity demand, and the use of most available woody biomass. These findings provide an exploratory guide toward a future chemical industry that harnesses alternative feedstocks.
- 14 July 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (29) , 13136-13155
Open AccessOptimal Pathways from Alternative Carbon Feedstocks to Organic Commodity Chemicals
The use of biogenic and waste feedstocks is a promising strategy to improve the chemical sector’s supply chain resiliency and carbon intensity. To help inform research efforts that transform these feedstocks into industrial chemicals, we used a systematic analysis framework to consistently evaluate the economics and environmental impacts of >200 alternative production pathways for 51 organic commodity chemicals in the United States under an optimistic future scenario that reflects the potential upper bounds of process scalability, energy availability, and carbon uptake. Lower-impact and lower-cost alternative pathways were identified for all but three chemicals, with 75% using thermochemical routes and half leveraging existing manufacturing infrastructure. Scenario analysis shows that the ranking of these pathways for half of the assessed chemicals is particularly sensitive to carbon uptake assumptions and criteria prioritization (i.e., cost only, environmental impact only, or both), with changes in electricity grid mix, hydrogen source, and underlying mass and energy flow data proving less influential. Implementing alternative pathways for just 11 chemicals could support a transition to net-zero greenhouse gas emissions from chemical production by 2050, with 11% lower cost than business as usual, similar water requirements, quadrupled electricity demand, and the use of most available woody biomass. These findings provide an exploratory guide toward a future chemical industry that harnesses alternative feedstocks.
- 23 June 2026
- Published by American Chemical Society (ACS) in Journal of Chemical Information and Modeling
- Vol. 66 (13) , 7688-7700
Mechanism-Informed Rules Tunably Balance Novelty and Feasibility of Predicted Enzymatic Reactions
Enzymes catalyze reactions with remarkable specificity and can unlock recalcitrant feedstocks that are dilute, complex, and variable in their constituent molecules. While characterized enzymatic reactions cover a wide range of chemistries, there are an undetermined number of cryptic activities for every known one. These cryptic activities can be elicited through rational design, adaptive laboratory evolution, and increasingly, generative models of proteins. However, prior to tuning a catalyst, one must efficiently predict viable novel reactions. In this work, we leverage the growing amount of mechanistic enzyme information, specifically the Mechanism and Catalytic Site Atlas, to construct a set of reaction rules that can meet this demand. By explicitly utilizing mechanistic information, the rule sets developed here more accurately identify molecular structures required for catalysis compared to existing curated and heuristically constructed rules. The 899 Distilled rules are constructed directly from characterized mechanisms and recapitulate 62.5% of atom-mapped reactions from Rhea. The Learned rule set is generated from a classifier trained on structural patterns putatively required for catalytic mechanisms. The Learned rules recapitulate all atom-mapped Rhea reactions and precisely predict mechanism-required atoms (ROC-AUC = 0.98). Additionally, our Learned rules exhibit a more favorable trade-off between novelty and feasibility and provide users with fine-grained control over this trade-off. The rules are compatible with all SMARTS-based reaction network expansion and retrosynthesis software.
- 23 June 2026
- Published by American Chemical Society (ACS) in Journal of Chemical Information and Modeling
- Vol. 66 (13) , 7688-7700
Mechanism-Informed Rules Tunably Balance Novelty and Feasibility of Predicted Enzymatic Reactions
Enzymes catalyze reactions with remarkable specificity and can unlock recalcitrant feedstocks that are dilute, complex, and variable in their constituent molecules. While characterized enzymatic reactions cover a wide range of chemistries, there are an undetermined number of cryptic activities for every known one. These cryptic activities can be elicited through rational design, adaptive laboratory evolution, and increasingly, generative models of proteins. However, prior to tuning a catalyst, one must efficiently predict viable novel reactions. In this work, we leverage the growing amount of mechanistic enzyme information, specifically the Mechanism and Catalytic Site Atlas, to construct a set of reaction rules that can meet this demand. By explicitly utilizing mechanistic information, the rule sets developed here more accurately identify molecular structures required for catalysis compared to existing curated and heuristically constructed rules. The 899 Distilled rules are constructed directly from characterized mechanisms and recapitulate 62.5% of atom-mapped reactions from Rhea. The Learned rule set is generated from a classifier trained on structural patterns putatively required for catalytic mechanisms. The Learned rules recapitulate all atom-mapped Rhea reactions and precisely predict mechanism-required atoms (ROC-AUC = 0.98). Additionally, our Learned rules exhibit a more favorable trade-off between novelty and feasibility and provide users with fine-grained control over this trade-off. The rules are compatible with all SMARTS-based reaction network expansion and retrosynthesis software.
- Open Access
- 22 June 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (26) , 27900-27911
Mechanism of O 2 /NO-Promoted Oxidative C–C Bond Cleavage in Linear Alkanes
Selective oxidation of alkanes to oxygenated products remains a fundamental challenge, particularly if the goal is to promote C-C bond cleavage while minimizing formation of CO2. Oxidation conditions that use O2 and nitrogen oxides (NOx) have been shown to be very effective in promoting radical-mediated functionalization and oxidative carbon-carbon cleavage in saturated hydrocarbon polymers, such as polyethylene. Here, we investigate the mechanism of O2/NO-mediated oxidation of n-decane as a prototypical linear alkane substrate. These reactions enable identification and quantification of reactive intermediates, including nitrites, nitrates, alcohols, and ketones. Under the reaction conditions, these species convert into common ketone intermediates that evolve into α-diketones and other α-functionalized ketones, which undergo further conversion into carboxylic acids. Infrared (IR) spectroscopy indicates that HDPE oxidation proceeds through similar key intermediates. Together, these findings establish a mechanistic framework for NOx-mediated alkane oxidation and provide a foundation for the development of broadly applicable oxidative transformations.
- 22 June 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (26) , 27900-27911
Open AccessMechanism of O 2 /NO-Promoted Oxidative C–C Bond Cleavage in Linear Alkanes
Selective oxidation of alkanes to oxygenated products remains a fundamental challenge, particularly if the goal is to promote C-C bond cleavage while minimizing formation of CO2. Oxidation conditions that use O2 and nitrogen oxides (NOx) have been shown to be very effective in promoting radical-mediated functionalization and oxidative carbon-carbon cleavage in saturated hydrocarbon polymers, such as polyethylene. Here, we investigate the mechanism of O2/NO-mediated oxidation of n-decane as a prototypical linear alkane substrate. These reactions enable identification and quantification of reactive intermediates, including nitrites, nitrates, alcohols, and ketones. Under the reaction conditions, these species convert into common ketone intermediates that evolve into α-diketones and other α-functionalized ketones, which undergo further conversion into carboxylic acids. Infrared (IR) spectroscopy indicates that HDPE oxidation proceeds through similar key intermediates. Together, these findings establish a mechanistic framework for NOx-mediated alkane oxidation and provide a foundation for the development of broadly applicable oxidative transformations.