Anton A. Sinitsyn
Anton A. Sinitsyn has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Yuriy V. Vankov
Казанский государственный энергетический университет
2 shared publications - Ирина Ахметова
Казанский государственный энергетический университет
2 shared publications Лилия Мухаметова
Казанский государственный энергетический университет
2 shared publicationsA Fedukhin
National Research University «Moscow Power Engineering Institute», 111250 Russia, Moscow, Krasnokazarmennaya 14
1 shared publicationA. G. Gudkov
Vologda State University
1 shared publication- Aleksandr Kalyutik
Peter the Great St. Petersburg Polytechnic University
1 shared publication
Latest Publications
- Open Access
- 29 December 2025
- Published by NPG Publishing in Preprints.ru
УСТРОЙСТВО ДЛЯ ИЗМЕРЕНИЯ ТОЛЩИНЫ ЛЕГКОДЕФОРМИРУЕМЫХ МАТЕРИАЛОВ
В работе рассмотрено устройство, предназначенное для быстрого измерения толщины волокнистых и пористых легкодеформируемых материалов (например, фильтрующих и теплоизоляционных). Оно состоит из подвижного и неподвижного измерительных элементов, вертикальных направляющих, указателя толщины и измерительной линейки, при этом вес подвижного элемента рассчитан так, чтобы создавать удельную нагрузку 50±7,5 Па. Для удобства использования подвижный элемент может оснащаться держателем, а направляющие — помещаться в защитный корпус. Область применения: отрасли производства и контроля качества теплоизоляционных, фильтрующих и легкодеформируемых волокнистых и пористых материалов, в том числе в строительной индустрии, производстве фильтров, лёгкой промышленности и изготовлении нетканых материалов.
- 29 December 2025
- Published by NPG Publishing in Preprints.ru
Open AccessУСТРОЙСТВО ДЛЯ ИЗМЕРЕНИЯ ТОЛЩИНЫ ЛЕГКОДЕФОРМИРУЕМЫХ МАТЕРИАЛОВ
В работе рассмотрено устройство, предназначенное для быстрого измерения толщины волокнистых и пористых легкодеформируемых материалов (например, фильтрующих и теплоизоляционных). Оно состоит из подвижного и неподвижного измерительных элементов, вертикальных направляющих, указателя толщины и измерительной линейки, при этом вес подвижного элемента рассчитан так, чтобы создавать удельную нагрузку 50±7,5 Па. Для удобства использования подвижный элемент может оснащаться держателем, а направляющие — помещаться в защитный корпус. Область применения: отрасли производства и контроля качества теплоизоляционных, фильтрующих и легкодеформируемых волокнистых и пористых материалов, в том числе в строительной индустрии, производстве фильтров, лёгкой промышленности и изготовлении нетканых материалов.
- Open Access
- 29 December 2025
- Published by NPG Publishing in Preprints.ru
УСТРОЙСТВО ДЛЯ КОМПЛЕКСНОГО ИЗМЕРЕНИЯ ТОЛЩИНЫ И ВЛАЖНОСТИ ЛЕГКОДЕФОРМИРУЕМЫХ МАТЕРИАЛОВ
В работе рассмотрено устройство, предназначенное для одновременного измерения толщины и влажности волокнистых и пористых легкодеформируемых материалов (в том числе фильтрующих и теплоизоляционных). Её конструкция включает подвижный и неподвижный измерительные элементы, вертикальные направляющие с защитной оболочкой, указатель толщины и измерительную линейку, при этом вес подвижного элемента создаёт нормированную удельную нагрузку 50±7,5 Па. Влажность определяется по диэлектрической проницаемости материала с последующим пересчётом в значение влажности согласно ГОСТ 21718-84, для чего используется измерительный конденсатор, образованный пластиной под подвижным элементом и неподвижным измерительным элементом через электроды. Область применения: отрасли производства и контроля качества теплоизоляционных, фильтрующих и легкодеформируемых волокнистых и пористых материалов, в том числе в строительной индустрии, производстве фильтров, лёгкой промышленности и изготовлении нетканых материалов.
- 29 December 2025
- Published by NPG Publishing in Preprints.ru
Open AccessУСТРОЙСТВО ДЛЯ КОМПЛЕКСНОГО ИЗМЕРЕНИЯ ТОЛЩИНЫ И ВЛАЖНОСТИ ЛЕГКОДЕФОРМИРУЕМЫХ МАТЕРИАЛОВ
В работе рассмотрено устройство, предназначенное для одновременного измерения толщины и влажности волокнистых и пористых легкодеформируемых материалов (в том числе фильтрующих и теплоизоляционных). Её конструкция включает подвижный и неподвижный измерительные элементы, вертикальные направляющие с защитной оболочкой, указатель толщины и измерительную линейку, при этом вес подвижного элемента создаёт нормированную удельную нагрузку 50±7,5 Па. Влажность определяется по диэлектрической проницаемости материала с последующим пересчётом в значение влажности согласно ГОСТ 21718-84, для чего используется измерительный конденсатор, образованный пластиной под подвижным элементом и неподвижным измерительным элементом через электроды. Область применения: отрасли производства и контроля качества теплоизоляционных, фильтрующих и легкодеформируемых волокнистых и пористых материалов, в том числе в строительной индустрии, производстве фильтров, лёгкой промышленности и изготовлении нетканых материалов.
- Open Access
- 21 April 2020
- Published by FSB Educational Establishment of Higher Education Daghestan State Technical University in Herald of Dagestan State Technical University. Technical Sciences
- Vol. 47 (1) , 147-155
FEATURES OF MOUNTED VENTILATED FACADE HEAT CONTROL SYSTEMS IN CONSTRUCTION PROJECTS
Abstract. Aim.An integral part of an energy audit of buildings and structures consists in thermal imaging diagnostics. This permits an evaluation of the heat-shielding properties of the enclosing structures of buildings in order to control the functional and operational status of engineering systems, as well as to identify implicit (invisible) and explicit (visible) defects in them. The aim of the work is to analyse some features and results of thermal control of an opaque hinged ventilated facade system and translucent enclosing structures in the form of window systems of a capital construction project.Method.Thermal imaging was used as a control for resolving issues of energy and resource conservation. The special importance of thermal control of translucent facade systems and non-translucent hinged ventilated facades of capital construction projects having various functional and operational purposes is highlighted.Results.A detailed algorithm is presented for supporting a comprehensive diagnosis of the heat engineering state of building envelopes for various construction projects by analysing thermograms, using thermal monitoring methods, to take into consideration engineering systems, building materials and finished products, along with technologies of full-scale thermal imaging inspection of translucent building envelopes. The obtained thermograms are presented and analysed.Conclusion.Current problems in the fields of energy efficiency and energy saving in the construction and energy industries are considered in the light of the latest technological developments. The proposed graph-analytical algorithm supporting a diagnosis of the heat engineering state of building envelopes based on the analysis of thermograms is the most comprehensive among known analogues and prototypes
- 21 April 2020
- Published by FSB Educational Establishment of Higher Education Daghestan State Technical University in Herald of Dagestan State Technical University. Technical Sciences
- Vol. 47 (1) , 147-155
Open AccessFEATURES OF MOUNTED VENTILATED FACADE HEAT CONTROL SYSTEMS IN CONSTRUCTION PROJECTS
Abstract. Aim.An integral part of an energy audit of buildings and structures consists in thermal imaging diagnostics. This permits an evaluation of the heat-shielding properties of the enclosing structures of buildings in order to control the functional and operational status of engineering systems, as well as to identify implicit (invisible) and explicit (visible) defects in them. The aim of the work is to analyse some features and results of thermal control of an opaque hinged ventilated facade system and translucent enclosing structures in the form of window systems of a capital construction project.Method.Thermal imaging was used as a control for resolving issues of energy and resource conservation. The special importance of thermal control of translucent facade systems and non-translucent hinged ventilated facades of capital construction projects having various functional and operational purposes is highlighted.Results.A detailed algorithm is presented for supporting a comprehensive diagnosis of the heat engineering state of building envelopes for various construction projects by analysing thermograms, using thermal monitoring methods, to take into consideration engineering systems, building materials and finished products, along with technologies of full-scale thermal imaging inspection of translucent building envelopes. The obtained thermograms are presented and analysed.Conclusion.Current problems in the fields of energy efficiency and energy saving in the construction and energy industries are considered in the light of the latest technological developments. The proposed graph-analytical algorithm supporting a diagnosis of the heat engineering state of building envelopes based on the analysis of thermograms is the most comprehensive among known analogues and prototypes
- Open Access
- 1 July 2019
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 288 (1) , 012121
Regional management of district heating
Nowadays in Russia we see rapid modernization of power engineering and transport systems. Under these conditions the issue concerning improvement of regional heat supply system energy-efficiency has gained a new importance. The aim of this study is to find new development directions of the public-private partnership (PPP), specifically from the perspective of its energy efficiency. Amid the financial crisis and economic sanctions the formation of public-private partnership allows increasing of energy efficiency of regional fuel and energy complex by means of regional energy service company creation. This paper will be useful both for central and local government and for private business.
- 1 July 2019
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 288 (1) , 012121
Open AccessRegional management of district heating
Nowadays in Russia we see rapid modernization of power engineering and transport systems. Under these conditions the issue concerning improvement of regional heat supply system energy-efficiency has gained a new importance. The aim of this study is to find new development directions of the public-private partnership (PPP), specifically from the perspective of its energy efficiency. Amid the financial crisis and economic sanctions the formation of public-private partnership allows increasing of energy efficiency of regional fuel and energy complex by means of regional energy service company creation. This paper will be useful both for central and local government and for private business.
- 1 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Development of a New Device for Human Body Temperature Regulation
This paper presents a new heat engineering device, which allows decreasing human body temperature and rapid recovering of normal temperature conditions after high-temperature treatment. Here we describe actuality of new device creation, provide its design description, operating principle and specifications. Also we present experimental investigations performed for obtaining the device specifications. The experimental data show relation between heat amount, transferred from human palm to water environment and antropometric parameters of this man.
- 1 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Development of a New Device for Human Body Temperature Regulation
This paper presents a new heat engineering device, which allows decreasing human body temperature and rapid recovering of normal temperature conditions after high-temperature treatment. Here we describe actuality of new device creation, provide its design description, operating principle and specifications. Also we present experimental investigations performed for obtaining the device specifications. The experimental data show relation between heat amount, transferred from human palm to water environment and antropometric parameters of this man.
- 1 January 2015
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 725-726, 1417-1422
Study of Operation of Power-Generating Devices of Gaseous Fuels Combustion
The paper identifies the relevance of research on the effectiveness of fire-technical processes in energy devices (boilers, furnaces and internal combustion engines, etc.) in order to optimize them and improve their reliability. The survey revealed the closeness of calculation methods for such devices. The development of engineering methodology of design and verification calculations is necessary for the further development of vibration combustion machines production industry. The author identifies the main problems of formation of calculating methodology for energy devices operating on the basis of vibration combustion. To determine the frequency of the impulse response of these devices the author proposes a mathematical model and the description of the process of the thermodynamic fluctuations in the combustion chamber, allowing to determine the reliability and efficiency of these devices for different purposes based on the principle of self-oscillating combustion of fuel at the design stage.
- 1 January 2015
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 725-726, 1417-1422
Study of Operation of Power-Generating Devices of Gaseous Fuels Combustion
The paper identifies the relevance of research on the effectiveness of fire-technical processes in energy devices (boilers, furnaces and internal combustion engines, etc.) in order to optimize them and improve their reliability. The survey revealed the closeness of calculation methods for such devices. The development of engineering methodology of design and verification calculations is necessary for the further development of vibration combustion machines production industry. The author identifies the main problems of formation of calculating methodology for energy devices operating on the basis of vibration combustion. To determine the frequency of the impulse response of these devices the author proposes a mathematical model and the description of the process of the thermodynamic fluctuations in the combustion chamber, allowing to determine the reliability and efficiency of these devices for different purposes based on the principle of self-oscillating combustion of fuel at the design stage.
- 30 December 2014
- Published by Oriental Scientific Publishing Company in Biosciences Biotechnology Research Asia
- Vol. 11 (3) , 1807-1813
Features of the Information-analytical System Application for Estimation the Support Areas for Creation of the Results of the Intellectual Activity of the Research and Educational Institutions
Biological Sciences, Health Sciences,Biology,Food and Medicinal control laboratories
- 30 December 2014
- Published by Oriental Scientific Publishing Company in Biosciences Biotechnology Research Asia
- Vol. 11 (3) , 1807-1813
Features of the Information-analytical System Application for Estimation the Support Areas for Creation of the Results of the Intellectual Activity of the Research and Educational Institutions
Biological Sciences, Health Sciences,Biology,Food and Medicinal control laboratories
- 1 March 2014
- Published by Springer Nature in Metallurgist
- Vol. 57 (11) , 1100-1105
Development of Energy Efficient Management of Production Process for Continuously Cast Slab Cooling and Solidification
- 1 March 2014
- Published by Springer Nature in Metallurgist
- Vol. 57 (11) , 1100-1105
Development of Energy Efficient Management of Production Process for Continuously Cast Slab Cooling and Solidification
- 14 February 2014
- Published by Springer Nature in Measurement Techniques
- Vol. 56 (11) , 1269-1273
The Development and Experience in Using a Series of Celsius Sensors for Monitoring the Temperature of the Working Body in a System for Controlling the Drying of Ceramic Articles
- 14 February 2014
- Published by Springer Nature in Measurement Techniques
- Vol. 56 (11) , 1269-1273
The Development and Experience in Using a Series of Celsius Sensors for Monitoring the Temperature of the Working Body in a System for Controlling the Drying of Ceramic Articles