RFRenata Carla Tavares dos Santos Felipe

Renata Carla Tavares dos Santos Felipe

*This is an algorithmically generated author record based on publicly available information.

Renata Carla Tavares dos Santos Felipe has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Análise da degradação de Plástico Reforçado em Fibra de Vidro quando exposto a água do mar e areia

    by Francisco Alisson de Queiroz, Gabriel Ramon Brito Silva, Liana de Holanda Viana Barros, Renata Carla Tavares dos Santos Felipe

    Os compósitos são combinações de dois ou mais materiais sendo uma a matriz e o outro um ou dois mais tipos de reforços. Sua aplicabilidade se estende por vários setores industriais, principalmente nos setores aeroespaciais e de transportes. Sua utilização vem crescendo nos últimos anos, porém sua utilidade depende de vários fatores como processo de fabricação, tipo de resina, reforço aplicado e ambiente de exposição. No entanto, esse tipo de material sofre degradação em sua vida útil, tornando necessário conhecer o seu comportamento durante o uso, pois são potenciais geradores de resíduos, trazendo preocupações para o meio ambiente. A partir disso, o trabalho teve como principal objetivo a fabricação de um material compósito que foi exposto a dois ambientes distintos, água do mar e areia, por um período designado a partir da saturação de umidade. Os corpos de prova (CPs) foram fabricados conforme normas ASTM e submetidos aos ensaios de densidade, umidade e calcinação. Após a saturação de umidade os CPs foram avaliados superficialmente através da microscopia eletrônica de varredura (MEV), sendo possível visualizar o degaste sofrido durante a exposição do material. Então, foi constatado que nos dois ambientes ocorreram degradação superficial, com mais intensidade, quando exposto na água do mar. Logo, foi possível concluir que esse tipo de compósito uma vez exposto a essas condições, evidencia a necessidade de adicionar uma nova camada do material visando proteger sua estrutura, aumentando a vida útil e mitigando a geração de resíduos no meio ambiente.


  • Open Access

    Resíduos sólidos industriais: compósito com resíduos de plástico reforçado com fibra de vidro

    by Neemias Silva de Souza, Renata Carla Tavares dos Santos Felipe, Raimundo Nonato Barbosa Felipe, Nathana Luíza Pinto de Lima

    A utilização dos compósitos poliméricos, pela indústria, se dá pela sua leveza e versatilidade em adaptarem-se a designs complexos. No entanto podem ser geradores de resíduos de difícil reciclagem, que muitas vezes são colocados em aterros sanitários, o que causa a necessidade de ações que venham minimizar a quantidade desses resíduos gerados. Diante disso, esse trabalho visa avaliar a resposta mecânica e física do compósito de fibra de vidro-E com a matriz poliéster, quando incorporado resíduo gerado de plástico reforçado por fibras de vidro (PRFV). Para tanto, foram fabricadas, mediante laminação manual, três placas, todas produzidas em vidro-E/poliéster, porém, em duas delas foram incorporados, em peso de resina, 10% e 15% dos resíduos de PRFV. Os ensaios de densidade, de umidade, de tração uniaxial e de flexão em três pontos foram realizados com base nas normas ASTM D792, ASTM D5259, ASTM D3039 e ASTM D790, respectivamente, buscando a caracterização e a avaliação da resposta mecânica após inserção dos resíduos no compósito. Os resultados demostraram que as amostras com resíduo absorveram mais umidade e tornaram-se mais leves. No entanto, houve uma perda da resistência mecânica, tanto na tração como na flexão, para as duas composições com resíduos adicionados, em comparação com amostras do compósito sem resíduo. Porém, a característica da fratura se deu de forma semelhante para os três compósitos avaliados. Destaca-se que as perdas nas propriedades não inviabilizam o uso dos resíduos nesses compósitos, uma vez se conhecendo as solicitações mecânicas e as condições de serviços em que serão expostos.


  • Open Access

    Cement mortars with use of polyethylene tereftalate aggregate: a review on its sustainability

    by Nathana Luiza Pinto de Lima, Renata Carla Tavares dos Santos Felipe, Raimundo Nonato Barbosa Felipe

    The high consumption of plastic products generates several impacts, mainly associated with its waste. Due to its characteristics, the possibilities of disposal of this waste are reduced, so that its use as by-products comprises the best solution for the management of this waste. In this context, research has emerged that uses the residue of plastic products, such as post-consumer polyethylene tereftalate (PET), as a substitute for the natural aggregate in cement products. The production of these materials intends to work in parallel two socio-environmental objectives: the reduction of consumption of natural aggregates and the reuse of plastic waste in construction materials. This work will present data related to research on the production of cementitious mortars with partial replacement of natural sand by light aggregate of PET waste (ALRP) aiming at the realization of the state of the art contributing to the methodological basis of future research on the subject. For that, systematic searches were carried out in the ScienceDirect, Web of Science and Scopus databases, using descriptors, logical operators and temporal constraint application. In addition to presenting the main research data, an approach will be made on the importance of the problems associated with the theme and the parameters to be met by this new ecological material based on the concepts of sustainable construction.


  • The variation in low speed impact strength on glass fiber/Kevlar composite hybrids

    by Jayna Kátia Dionísio dos Santos, Rayane Dantas da Cunha, Wanderley Ferreira de Amorim Junior, Renata Carla Tavares dos Santos Felipe, José Lira Braga Neto, Raimundo Carlos Silverio Freire Júnior

    The aim of this study was to analyze the effect of hybridization on impact and residual strength in composites as well as the types of damage caused by the impacts, quantifying the delaminated area of the test specimens. Two 11-layer composite laminates were developed, one with bidirectional glass fiber woven and the other a hybrid with three layers of bidirectional aramid fiber substituting the outer layers and the middle layer of the glass fiber. The materials revealed that the hybrid laminate obtained greater impact strength withstanding one impact of 76 J, albeit with an increase in the damaged area of between 64 and 85 cm2, resulting in a decline in mechanical properties along nearly the entire test specimen. This contrasts with what occurred in the glass fiber laminates, which recovered over 80% of their mechanical properties for a distance of 35 mm from the edge of the impactor. Moreover, it demonstrated that the variation in residual strength can be represented by an equation and that there is a relation between the damage area and the residual properties of the glass fiber material.


  • Evaluation of the environmental aging of the glass fiber-reinforced polymer composite when in contact with the effluent of a treatment plant

    by Yldeney Silva Domingos, Renata Carla Tavares dos Santos Felipe, Raimundo Nonato Barbosa Felipe, Glauber José Turolla Fernandes

    This paper presents an evaluation of the mechanical and physical behavior of the type E glass fiber-reinforced polymeric composite when exposed to environmental aging agents in an effluent treatment plant. The composite was made by the hand layup process, and the test bodies were made according to the American Society for Testing and Materials standards D3039-14 and D790-10 for the uniaxial tensile and three-point bending tests, respectively, where they were exposed for a period of eight months, conditioned above and immersed in the effluent of the treatment plant. The physicochemical characterization of the effluent was evaluated considering the following parameters: pH, conductivity, sulfate, alkalinity, acidity, sulfide, and temperature, aiming to characterize the effluent conditions in direct and indirect contact with the composite. After the exposure period, tests were carried out for morphological evaluation, structural integrity evaluation, mechanical performance evaluation, and fracture characterization of the polymer composite, thereby leading to a comparison of the mechanical characteristics in the original state to that of the aged state (after exposure in the effluent treatment plant). The polymeric composite studied was stable after the aging period, with little mass variation, less than 0.5%, and slight changes in color. The mechanical properties evaluated also did not change significantly during the study period. Variations in uniaxial tensile strength were less than 1.4% and for three-point bending less than 10%, thus showing that the type E glass fiber-reinforced polymer composite has potential for use in harsh environments such as in effluent treatment plants.


  • Open Access

    COMPORTAMENTO MECÂNICO DO COMPÓSITO PRFV QUANDO IMERSO EM ÁGUA DO MAR POR TEMPO PROLONGADO

    by Ricardo Alex Dantas da Cunha, Jayna Kátia Dionísio Santos, Renata Carla Tavares dos Santos Felipe, Raimundo Nonato Barbosa Felipe

    No setor industrial, materiais que apresentem bom desempenho mecânico atrelado com uma vida útil elevada e a uma boa relação custo/benefício vem a cada dia sendo mais procurado, diante disso, os materiais compósitos, dentre eles os compósitos poliméricos fibrosos estão a cada dia sendo mais utilizados, pois estes desempenham determinadas funções que os materiais convencionais não conseguem desempenhar. No entanto, em se tratando dos compósitos poliméricos é importante que se saiba de fato qual o comportamento que este material tem quando está em situações adversas como em contanto com os fluidos de processo ou até mesmo com calor. Desta forma, o objetivo dessa pesquisa foi desenvolver um compósito utilizando uma matriz polimérica de resina poliéster com reforço fibroso de manta de vidro-E, onde este foi imerso em água do mar por um período de 1460 dias. Os corpos de prova (CP’s) foram submetidos ao ensaio de tração uniaxial, buscando determinar resistência e módulo de tração. Feito isso, realizou-se um comparativo das propriedades mecânicas para todas as condições de ensaio como estado seco e água do mar. Além disso, foi caracterizada a fratura final dos CP’s para a condição de imersão. Ao término dos ensaios observou-se perda nas propriedades mecânicas para a condição de ensaio de tração após o período de imersão, porém esta perda não invalida o seu uso uma vez considerando estes parâmetros durante a elaboração do projeto estrutural.


  • Open Access

    Polymer Composites Reinforced with Hybrid Fiber Fabrics

    by Renata Carla Tavares dos Santos Felipe, Raimundo Nonato Barbosa Felipe, Ana Claudia de Melo Caldas Batista, Eve Maria Freire Aquino

    In an effort to show the influence of the hybridization method in hybrid fabric reinforced composites within the characteristic of the fracture and the mechanical properties, two laminate reinforced with bi-directional woven were developed, where one of them was reinforced with a hybrid strand (hybrid strand composite laminate) and the other with a different strands (hybrid fabric composite laminate). Both laminates used polyester resin, Kevlar-49 and glass-E fibers, had four layers and were prepared industrially by hand lay-up manufacturing. The percentages by weight of fiberglass and Kevlar in each type of woven are equal. The hybrid strand composite laminate showed a higher tensile strength, however the hybrid fabric composite laminate showed superior properties in three-point bending test, for example, 41.7 % superiority in flexural strength. The results showed that the hybridization method in hybrid reinforced composites influences the mechanical behavior of laminates and the formation and spread of damage.


  • Laminar composite structures: Study of environmental aging effects on structural integrity

    by Rnb Felipe, Rcts Felipe, Emf Aquino

    In this study, a glass fiber reinforced plastic sheet was analyzed to study the environmental deterioration (aging) on its surface, when placed in a chamber built for this purpose, and the mechanical behavior when subjected to uniaxial tension was also studied. The environmental deterioration of the sheet in the chamber (aging chamber) occurred in three different ways: in the first, the sheets were subjected to alternative exposure of vapor and UV radiation; in the second it was exposed just to UV radiation, and in the third it was exposed simply to vapor. The main objective of this arrangement was to find out which of the agents tested will contribute more on the deterioration (aging) of the sheet surface, as in a structural laminate, the outside sheet that is being exposed to, could suffer the same type of damage under the conditions studied. Techniques for thickness measurements, and the surface analysis using an optical microscope, a scanner and scanning electron microscope were used. For the determination of the uniaxial tensional properties, a universal testing instrument was used. Almost all the results showed that there is a direct influence on the environmental deterioration on each and every parameter studied.


  • Open Access

    COMPOSITE FRIEND SISAL / POLYESTER TREATED IN SURFACE

    by Jayna K. Dionisio Santos, Ricardo Alex D. Cunha, Renata Carla Tavares Dos Santos Felipe, Raimundo Nonato B. Felipe, Gilson Medeiros

    The use of composites in manufacturing equipment and products is taking a very important space in the industry in general. Moreover these materials have unique characteristics when analyzed separately from constituents who are part of them. However it is know that cares must be taken in their manufacture, as the use of appropriate process and the composition of each element, in addition to adherence fiber / matrix, which is a major factor in obtaining of the final mechanical strength of the product. One should also take into account whether the composites are environmentally friendly. For this reason, in this work, a composite partially ecological was made, using as reinforcement, a sisal woven and, as matrix, the polyester resin. Seeking to improve the adherence fiber / matrix, a treatment in sisal woven was performed with aqueous solution of sodium hydroxide (NaOH) at a concentration of 3%. The composite subjected to this treatment presented, in bending test, a better mechanical performance, with an increase of 27% in the flexion strength and of 54% in maximum strain, but there was a reduction of about 15% in its flexural modulus.