Talha Erdem
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Talha Erdem has a total of 131 co-authors. Here are the top co-authors by number of shared publications:
- Hilmi Volkan Demir
Nanyang Technological University
45 shared publications - Zeliha Soran-Erdem
Bioengineering Program, Graduate School of Engineering and Science, Abdullah Gul University, Kayseri, Turkey
12 shared publications - Nikolai Gaponik
Physical Chemistry, TU Dresden, Zellescher Weg 19, 01069 Dresden, Germany
10 shared publications - Sedat Nizamoglu
Department of Electrical and Electronics Engineering, Koc University, Istanbul, Turkey
10 shared publications - Yusuf Kelestemur
Department of Metallurgical and Materials Engineering Middle East Technical University Ankara Turkiye
10 shared publications - Ahmet Faruk Yazici
Department of Materials Science and Nanotechnology Engineering, Abdullah Gül University, Kayseri, Türkiye
8 shared publications
Latest Publications
- Open Access
- 8 January 2026
- Published by IOP Publishing in Nano Express
- Vol. 7 (1) , 015004
Colloidal photodetectors based on engineered multishelled InP based quantum dots
In this work, we present a straightforward and cost-effective approach to synthesize multi-shell InP/ZnSe/ZnSeS/ZnS quantum dots (QDs) that show promising potential for use in photodetectors. By carefully layering ZnSe, ZnSeS, and ZnS shells around an InP core, we were able to enhance the stability and optical performance of the QDs, achieving a narrow emission peak of 45 nm and a high photoluminescence quantum yield of 55%. These QDs were then integrated into simple photodetector devices, which possessed impressive sensitivity and detection capabilities. Specifically, our devices achieved a peak responsivity of 0.54 A W −1 and a detectivity of 2.22 × 10 11 Jones at 400 nm with a 5 V bias. This study highlights the potential of InP-based QDs as a safer and more sustainable alternative to traditional QDs that contain toxic heavy metals, offering a viable path forward for developing high-performance optoelectronic devices. Our findings suggest that these InP/ZnSe/ZnSeS/ZnS QDs could be a key material for the next generation of high-performance optoelectronic devices, especially in applications that require highly sensitive and stable photodetectors.
- 8 January 2026
- Published by IOP Publishing in Nano Express
- Vol. 7 (1) , 015004
Open AccessColloidal photodetectors based on engineered multishelled InP based quantum dots
In this work, we present a straightforward and cost-effective approach to synthesize multi-shell InP/ZnSe/ZnSeS/ZnS quantum dots (QDs) that show promising potential for use in photodetectors. By carefully layering ZnSe, ZnSeS, and ZnS shells around an InP core, we were able to enhance the stability and optical performance of the QDs, achieving a narrow emission peak of 45 nm and a high photoluminescence quantum yield of 55%. These QDs were then integrated into simple photodetector devices, which possessed impressive sensitivity and detection capabilities. Specifically, our devices achieved a peak responsivity of 0.54 A W −1 and a detectivity of 2.22 × 10 11 Jones at 400 nm with a 5 V bias. This study highlights the potential of InP-based QDs as a safer and more sustainable alternative to traditional QDs that contain toxic heavy metals, offering a viable path forward for developing high-performance optoelectronic devices. Our findings suggest that these InP/ZnSe/ZnSeS/ZnS QDs could be a key material for the next generation of high-performance optoelectronic devices, especially in applications that require highly sensitive and stable photodetectors.
- Open Access
- 9 December 2025
- Published by IOP Publishing in Nanotechnology
- Vol. 37 (1)
Performance boost in QLEDs using octanethiol-capped core/shell/shell quantum dots
Quantum dots attract significant attention as one of the most promising colloidal nanocrystals with unique optical properties and potential applications for the next generation of display technology. In this paper, we evaluate the performance of CdZnSeS-based alloyed-shell QDs for electroluminescence devices upon additional shell growth and ligand exchange. This includes core/shell and core/shell/shell QDs, whose latter includes an additional ZnS shell and octanethiol ligands. We present detailed characterizations of QDs using TEM, XRD, and various spectroscopic techniques and demonstrate their LEDs (QLEDs). We find the photoluminescence quantum yield (PLQY) of C/S/S QDs increased from 68.8% to 88.7% compared to C/S QDs whereas the emission linewidth narrows from 22.2 nm to 20.8 nm. QLEDs fabricated with C/S/S QDs exhibit a higher peak external quantum efficiency (EQE) of 4.1% and maximum luminance of 85,000 cd/m², compared to 2.3% EQE and 67,000 cd/m² for C/S QLEDs. In this respect, the octanethiol-assisted shell growth significantly improves the optical properties of QDs and performance of QLEDs, likely attributed to the enhanced charge balance and increased radiative recombination rate.
- 9 December 2025
- Published by IOP Publishing in Nanotechnology
- Vol. 37 (1)
Open AccessPerformance boost in QLEDs using octanethiol-capped core/shell/shell quantum dots
Quantum dots attract significant attention as one of the most promising colloidal nanocrystals with unique optical properties and potential applications for the next generation of display technology. In this paper, we evaluate the performance of CdZnSeS-based alloyed-shell QDs for electroluminescence devices upon additional shell growth and ligand exchange. This includes core/shell and core/shell/shell QDs, whose latter includes an additional ZnS shell and octanethiol ligands. We present detailed characterizations of QDs using TEM, XRD, and various spectroscopic techniques and demonstrate their LEDs (QLEDs). We find the photoluminescence quantum yield (PLQY) of C/S/S QDs increased from 68.8% to 88.7% compared to C/S QDs whereas the emission linewidth narrows from 22.2 nm to 20.8 nm. QLEDs fabricated with C/S/S QDs exhibit a higher peak external quantum efficiency (EQE) of 4.1% and maximum luminance of 85,000 cd/m², compared to 2.3% EQE and 67,000 cd/m² for C/S QLEDs. In this respect, the octanethiol-assisted shell growth significantly improves the optical properties of QDs and performance of QLEDs, likely attributed to the enhanced charge balance and increased radiative recombination rate.
- Open Access
- 30 June 2025
- Published by Cumhuriyet University in Cumhuriyet Science Journal
- Vol. 46 (2) , 396-404
Optical Polarization Response of Hybrid Gratings Made of Metals and Polymers Based on Bruggeman Theory
In the current state of the art of grating designs, compositions involving different metals and polymers have not been adequately addressed. Our study aims to fill this gap by investigating the influence of varying material compositions on polarization properties. To address this issue, we computed the refractive indices of mixtures of gold, silver, and poly(dimethyl siloxane) (PDMS) using the Bruggeman Theory, and simulated optical transmission and reflection of the gratings made of these hybrids. Our analysis revealed prominent peaks in the extinction coefficient at distinct wavelengths for various material ratios. Notably, our simulation results suggest the potential for fine-tuning the extinction coefficient within the range of 450-1000 nm. Furthermore, we demonstrate the attainment of polarization ratios of both 0 and 1 within the simulation environment. These outcomes offer the prospect of designing optical filters and polarizers targeted to specific wavelengths.
- 30 June 2025
- Published by Cumhuriyet University in Cumhuriyet Science Journal
- Vol. 46 (2) , 396-404
Open AccessOptical Polarization Response of Hybrid Gratings Made of Metals and Polymers Based on Bruggeman Theory
In the current state of the art of grating designs, compositions involving different metals and polymers have not been adequately addressed. Our study aims to fill this gap by investigating the influence of varying material compositions on polarization properties. To address this issue, we computed the refractive indices of mixtures of gold, silver, and poly(dimethyl siloxane) (PDMS) using the Bruggeman Theory, and simulated optical transmission and reflection of the gratings made of these hybrids. Our analysis revealed prominent peaks in the extinction coefficient at distinct wavelengths for various material ratios. Notably, our simulation results suggest the potential for fine-tuning the extinction coefficient within the range of 450-1000 nm. Furthermore, we demonstrate the attainment of polarization ratios of both 0 and 1 within the simulation environment. These outcomes offer the prospect of designing optical filters and polarizers targeted to specific wavelengths.
- Open Access
- 11 April 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (21) , 9747-9754
Light-Controlled Electrostatic Self-Assembly of Quantum Dots
- 11 April 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (21) , 9747-9754
Open AccessLight-Controlled Electrostatic Self-Assembly of Quantum Dots
- Open Access
Tailoring Quantum Dot Shell Thickness and Polyethylenimine Interlayers for Optimization of Inverted Quantum Dot Light-Emitting Diodes
Quantum dot light-emitting diodes (QLEDs) hold great promise for next-generation display applications owing to their exceptional optical properties and versatile tunability. In this study, we investigate the effects of quantum dot (QD) shell thickness, polyethylenimine (PEI) concentration, and PEI layer position on the performance of inverted QLED devices. Two types of alloyed-core/shell QDs with varying shell thicknesses were synthesized using a one-pot method with mean particle sizes of 8.0 ± 0.9 nm and 10.3 ± 1.3 nm for thin- and thick-shelled QDs, respectively. Thick-shelled QDs exhibited a higher photoluminescence quantum yield (PLQY) and a narrower emission linewidth compared to their thin-shelled counterparts. Next, QLEDs employing these QDs were fabricated. The incorporation of PEI layers on either side of the QD emissive layer significantly enhanced device performance. Using PEI on the hole transport side resulted in greater improvement than on the electron injection side. Sandwiching the QD layer between two PEI layers led to the best performance, with a maximum external quantum efficiency (EQE) of 17% and a peak luminance of 91,174 cd/m2 achieved using an optimized PEI concentration of 0.025 wt% on both electron injection and hole injection sides. This study highlights the critical role of QD shell engineering and interfacial modification in achieving high-performance QLEDs for display applications.
Open AccessTailoring Quantum Dot Shell Thickness and Polyethylenimine Interlayers for Optimization of Inverted Quantum Dot Light-Emitting Diodes
Quantum dot light-emitting diodes (QLEDs) hold great promise for next-generation display applications owing to their exceptional optical properties and versatile tunability. In this study, we investigate the effects of quantum dot (QD) shell thickness, polyethylenimine (PEI) concentration, and PEI layer position on the performance of inverted QLED devices. Two types of alloyed-core/shell QDs with varying shell thicknesses were synthesized using a one-pot method with mean particle sizes of 8.0 ± 0.9 nm and 10.3 ± 1.3 nm for thin- and thick-shelled QDs, respectively. Thick-shelled QDs exhibited a higher photoluminescence quantum yield (PLQY) and a narrower emission linewidth compared to their thin-shelled counterparts. Next, QLEDs employing these QDs were fabricated. The incorporation of PEI layers on either side of the QD emissive layer significantly enhanced device performance. Using PEI on the hole transport side resulted in greater improvement than on the electron injection side. Sandwiching the QD layer between two PEI layers led to the best performance, with a maximum external quantum efficiency (EQE) of 17% and a peak luminance of 91,174 cd/m2 achieved using an optimized PEI concentration of 0.025 wt% on both electron injection and hole injection sides. This study highlights the critical role of QD shell engineering and interfacial modification in achieving high-performance QLEDs for display applications.
- Open Access
- 6 June 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (26) , 18528-18535
Sustainable next-generation color converters from P. harmala seed extracts for solid-state lighting
We present the extracts of Peganum harmala in solid matrices as environmentally-friendly color converters for LEDs. The extract incorporated into paper possesses a quantum yield of 44.7% and its LED achieves a luminous efficiency of 21.9 lm W −1 .
- 6 June 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (26) , 18528-18535
Open AccessSustainable next-generation color converters from P. harmala seed extracts for solid-state lighting
We present the extracts of Peganum harmala in solid matrices as environmentally-friendly color converters for LEDs. The extract incorporated into paper possesses a quantum yield of 44.7% and its LED achieves a luminous efficiency of 21.9 lm W −1 .
- 3 March 2024
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 58 (10) , 1267-1277
Effects of silver nanowires and their surface modification on electromagnetic interference, transport and mechanical properties of an aerospace grade epoxy
The aerospace industry has progressively grown its use of composites. Electrically conductive nanocomposites are among important modern materials for this sector. We report on a bulk composite containing silver nanowires (AgNW) and an aerospace grade epoxy for use in carbon fiber reinforced polymers (CFRPs). AgNWs’ surfaces were also modified to enhance their ability to be dispersed in epoxy. Composites were obtained by use of three-roll milling which is of major interest for industrial applications, especially for the aerospace sector, since the process is scalable and works for aerospace grade resins with high curing temperatures. Our main objective is to improve the electromagnetic interference (EMI) shielding performance of CFRPs via improving the properties of the resin material. The addition of AgNWs did not considerably alter the flexural strength of the epoxy, however the composite with surface-modified AgNWs has a 46 % higher flexural strength. Adding AgNWs over a low threshold concentration of 0.05 wt% significantly enhanced the electrical conductivity. Conductivities above the percolation threshold lie around 102 S/m. At a concentration of 5 wt% AgNW, the EMI shielding efficiency (SE) of epoxy increased from 3.49 to 12.31 dB. Moreover, the thermal stability of the epoxy was unaffected by AgNWs. As a result, it was discovered that (surface modified) AgNWs improved the (multifunctional) capabilities of the aerospace grade epoxy resin which might be used in CFRPs to further enhance properties of composites parts, demonstrating suitability of AgNWs’ as a reinforcement material in aerospace applications.
- 3 March 2024
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 58 (10) , 1267-1277
Effects of silver nanowires and their surface modification on electromagnetic interference, transport and mechanical properties of an aerospace grade epoxy
The aerospace industry has progressively grown its use of composites. Electrically conductive nanocomposites are among important modern materials for this sector. We report on a bulk composite containing silver nanowires (AgNW) and an aerospace grade epoxy for use in carbon fiber reinforced polymers (CFRPs). AgNWs’ surfaces were also modified to enhance their ability to be dispersed in epoxy. Composites were obtained by use of three-roll milling which is of major interest for industrial applications, especially for the aerospace sector, since the process is scalable and works for aerospace grade resins with high curing temperatures. Our main objective is to improve the electromagnetic interference (EMI) shielding performance of CFRPs via improving the properties of the resin material. The addition of AgNWs did not considerably alter the flexural strength of the epoxy, however the composite with surface-modified AgNWs has a 46 % higher flexural strength. Adding AgNWs over a low threshold concentration of 0.05 wt% significantly enhanced the electrical conductivity. Conductivities above the percolation threshold lie around 102 S/m. At a concentration of 5 wt% AgNW, the EMI shielding efficiency (SE) of epoxy increased from 3.49 to 12.31 dB. Moreover, the thermal stability of the epoxy was unaffected by AgNWs. As a result, it was discovered that (surface modified) AgNWs improved the (multifunctional) capabilities of the aerospace grade epoxy resin which might be used in CFRPs to further enhance properties of composites parts, demonstrating suitability of AgNWs’ as a reinforcement material in aerospace applications.
- Open Access
- 18 October 2023
- Published by EDP Sciences in EPJ Web of Conferences
- Vol. 287, 05004
Optical control of hierarchical DNA-functionalized nanoparticle self-assembly on 2D surfaces
We investigated the effect of light on the DNA-driven self-assembly to form hierarchical patterns on two dimensional surfaces. We specifically focused on the self-assembly of DNA-functionalized quantum dots (QDs) onto DNA-functionalized glass substrate while illuminating the surface with a laser during coating process. The region illuminated with a green laser remained uncoated with red-emitting QDs while the not-illuminated region was successfully coated. Next, a red laser whose light cannot be absorbed by the red-emitting QDs did not avoid the DNA-driven self-assembly of the QDs onto glass substrate. Additionally, we demonstrated that silica nanoparticles that had been functionalized with DNA and are not able to absorb the light in the visible regime were again coated on the surface while being exposed to a green laser. These results prove that the absorption of the light is responsible for controlling the binding-unbinding process of QDs. Finally, we added DNA-functionalized green-emitting QDs onto the area that was not coated with red-emitting QDs under the green laser exposure. We observed successful coating of previously uncoated regions with the green QDs. This revealed the viability of our technique for building up hierarchical structures without using, sophisticated, or resource-intensive microfabrication methods.
- 18 October 2023
- Published by EDP Sciences in EPJ Web of Conferences
- Vol. 287, 05004
Open AccessOptical control of hierarchical DNA-functionalized nanoparticle self-assembly on 2D surfaces
We investigated the effect of light on the DNA-driven self-assembly to form hierarchical patterns on two dimensional surfaces. We specifically focused on the self-assembly of DNA-functionalized quantum dots (QDs) onto DNA-functionalized glass substrate while illuminating the surface with a laser during coating process. The region illuminated with a green laser remained uncoated with red-emitting QDs while the not-illuminated region was successfully coated. Next, a red laser whose light cannot be absorbed by the red-emitting QDs did not avoid the DNA-driven self-assembly of the QDs onto glass substrate. Additionally, we demonstrated that silica nanoparticles that had been functionalized with DNA and are not able to absorb the light in the visible regime were again coated on the surface while being exposed to a green laser. These results prove that the absorption of the light is responsible for controlling the binding-unbinding process of QDs. Finally, we added DNA-functionalized green-emitting QDs onto the area that was not coated with red-emitting QDs under the green laser exposure. We observed successful coating of previously uncoated regions with the green QDs. This revealed the viability of our technique for building up hierarchical structures without using, sophisticated, or resource-intensive microfabrication methods.
- Open Access
- 9 August 2023
- Published by The Royal Society in Royal Society Open Science
- Vol. 10 (8) , 230586
Numerical analysis and experimental verification of optical scattering from microplastics
Accurate and fast characterization of the micron-sized plastic particles in aqueous media requires an in-depth understanding of light interaction with these particles. Due to the complexity of Mie scattering theory, the features of the scattered light have rarely been related to the physical properties of these tiny objects. To address this problem, we reveal the relation of the wavelength-dependent optical scattering patterns with the size and refractive index of the particles by numerically studying the angular scattering features. We subsequently present a low-cost setup to measure the optical scattering of the particles. Theoretical investigation shows that the angular distribution of the scattered light by microplastics carries distinct signatures of the particle size and the refractive index. The results can be used to develop a portable, low-cost setup to detect microplastics in water.
- 9 August 2023
- Published by The Royal Society in Royal Society Open Science
- Vol. 10 (8) , 230586
Open AccessNumerical analysis and experimental verification of optical scattering from microplastics
Accurate and fast characterization of the micron-sized plastic particles in aqueous media requires an in-depth understanding of light interaction with these particles. Due to the complexity of Mie scattering theory, the features of the scattered light have rarely been related to the physical properties of these tiny objects. To address this problem, we reveal the relation of the wavelength-dependent optical scattering patterns with the size and refractive index of the particles by numerically studying the angular scattering features. We subsequently present a low-cost setup to measure the optical scattering of the particles. Theoretical investigation shows that the angular distribution of the scattered light by microplastics carries distinct signatures of the particle size and the refractive index. The results can be used to develop a portable, low-cost setup to detect microplastics in water.
- Open Access
Light-assisted hierarchical fabrication of two-dimensional surfaces using DNA-functionalized semiconductor nanocrystal quantum dots
The development of novel strategies for self-assembly in the field of nanotechnology has witnessed remarkable progress in recent years. Here, we present a DNA-driven programmable self-assembly to fabricate the targeted nanophotonic structures. The exploitation of the programmable properties of DNA and the unique optical properties of QDs unfolds the ability to engineer complex nanostructures with laser irradiation. The main advantages of this method are the precise interaction of colloidal quantum dots (QDs)/nanoparticles (NPs) with the substrate and its reversibility in tuning the temperature of the medium. Two-dimensional (2D) hierarchical patterns of QD-ssDNA (ss-single stranded) conjugates were formed over the amine-ssDNA (NH-ssDNA complementary to the ssDNA conjugated with QDs) coated glass substrates using the laser (green laser light) radiation for3 or4 h. The localised heating effect of laser created a dark spot on the substrate where the laser was irradiated. The optical microscopy images confirmed the effect of laser irradiation on the coating behaviour of QD-ssDNA conjugates on the substrate. Further, green-emitting QD-ssDNA were coated onto the hole created by laser radiation over the red-emitting QD-ssDNA-coated substrate. The optical properties of DNA-functionalized QDs can be actively controlled on the complementary DNA-functionalized glass surface by an external optical excitation. The results of this study demonstrate the potential of light-driven self-assembly as a powerful tool for fabricating desired nanostructures of DNA-QD conjugates. This technique holds promise for various applications, including the development of advanced optical devices, nanophotonic circuits, and bioengineering systems.
Open AccessLight-assisted hierarchical fabrication of two-dimensional surfaces using DNA-functionalized semiconductor nanocrystal quantum dots
The development of novel strategies for self-assembly in the field of nanotechnology has witnessed remarkable progress in recent years. Here, we present a DNA-driven programmable self-assembly to fabricate the targeted nanophotonic structures. The exploitation of the programmable properties of DNA and the unique optical properties of QDs unfolds the ability to engineer complex nanostructures with laser irradiation. The main advantages of this method are the precise interaction of colloidal quantum dots (QDs)/nanoparticles (NPs) with the substrate and its reversibility in tuning the temperature of the medium. Two-dimensional (2D) hierarchical patterns of QD-ssDNA (ss-single stranded) conjugates were formed over the amine-ssDNA (NH-ssDNA complementary to the ssDNA conjugated with QDs) coated glass substrates using the laser (green laser light) radiation for3 or4 h. The localised heating effect of laser created a dark spot on the substrate where the laser was irradiated. The optical microscopy images confirmed the effect of laser irradiation on the coating behaviour of QD-ssDNA conjugates on the substrate. Further, green-emitting QD-ssDNA were coated onto the hole created by laser radiation over the red-emitting QD-ssDNA-coated substrate. The optical properties of DNA-functionalized QDs can be actively controlled on the complementary DNA-functionalized glass surface by an external optical excitation. The results of this study demonstrate the potential of light-driven self-assembly as a powerful tool for fabricating desired nanostructures of DNA-QD conjugates. This technique holds promise for various applications, including the development of advanced optical devices, nanophotonic circuits, and bioengineering systems.