Guang-Peng Wu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Guang-Peng Wu has a total of 184 co-authors. Here are the top co-authors by number of shared publications:
Rui Xie
Key Laboratory of Adsorption and Separation Materials & Technologies of Zhejiang Province Department of Polymer Science and Engineering Zhejiang University Hangzhou 310058 China
20 shared publications- Guan-Wen Yang
Zhejiang Sci-Tech University
19 shared publications Guan‐Wen Yang
MOE Laboratory of Macromolecular Synthesis and Functionalization Department of Polymer Science and Engineering Zhejiang University Hangzhou 310058 China
18 shared publicationsBo Li
College of Material Chemistry and Chemical Engineering Key Laboratory of Organosilicon Chemistry and Material Technology Ministry of Education Hangzhou Normal University Hangzhou Zhejiang 311121 China
14 shared publications- Yao-Yao Zhang
Zhejiang Sci-Tech University
14 shared publications Yao‐Yao Zhang
MOE Key Laboratory of Macromolecular Synthesis and Functionalization Department of Polymer Science and Engineering Zhejiang University Hangzhou 310027 P. R. China
11 shared publications
Latest Publications
- 22 January 2026
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (3) , 1251-1261
Copolymerization of CO 2 with Epoxides by Imidazolium Engineering in Bifunctional Organoboron Catalysts
- 22 January 2026
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (3) , 1251-1261
Copolymerization of CO 2 with Epoxides by Imidazolium Engineering in Bifunctional Organoboron Catalysts
- 29 October 2025
- Published by Wiley in Angewandte Chemie
- Vol. 137 (52)
Dual Sacrificial Strategy Toward Tough and Recyclable CO 2 ‐Sourced Epoxy Thermosets
Developing thermosetting epoxy resins that concurrently deliver high performance (integrating superior strength with toughness) and chemical recyclability presents a persistent challenge in sustainable polymer advancement. Herein, we present a dual sacrificial strategy employing CO 2 ‐derived poly(ether‐carbonate) (PPC) polyols as functional epoxy hardeners. Flexible ether segments serve as sacrificial components enhancing toughness, while cleavable carbonate groups function as sacrificial sites facilitating degradation. This dual sacrificial design in PPC polyols demonstrably enhances mechanical properties while enabling degradability. Model reactions and curing kinetics analyses reveal a distinctive dual‐stage crosslinking process governed by hydroxyl transfer mechanisms. The resulting hierarchical cure yields thermosets with unconventional hyperbranched topologies embedded within uniform network structures, conferring: 1) tunable thermomechanical properties ( T g = 53–129 °C) through precise polyol content control; 2) substantially elevated toughness (up to 5.2 MJ m −3 ), exceeding conventional epoxy resins by >300%; and 3) rapid catalytic chemical recyclability (<4 h at 60 °C), with degradation products functioning as reusable hardeners. Practical validation via glass fiber‐reinforced composites and electronic packaging confirms robust performance with full recyclability. This integrated methodology reconciles the historical trade‐off between mechanical robustness and chemical recyclability in thermosets, establishing a viable pathway toward sustainable epoxy production.
- 29 October 2025
- Published by Wiley in Angewandte Chemie
- Vol. 137 (52)
Dual Sacrificial Strategy Toward Tough and Recyclable CO 2 ‐Sourced Epoxy Thermosets
Developing thermosetting epoxy resins that concurrently deliver high performance (integrating superior strength with toughness) and chemical recyclability presents a persistent challenge in sustainable polymer advancement. Herein, we present a dual sacrificial strategy employing CO 2 ‐derived poly(ether‐carbonate) (PPC) polyols as functional epoxy hardeners. Flexible ether segments serve as sacrificial components enhancing toughness, while cleavable carbonate groups function as sacrificial sites facilitating degradation. This dual sacrificial design in PPC polyols demonstrably enhances mechanical properties while enabling degradability. Model reactions and curing kinetics analyses reveal a distinctive dual‐stage crosslinking process governed by hydroxyl transfer mechanisms. The resulting hierarchical cure yields thermosets with unconventional hyperbranched topologies embedded within uniform network structures, conferring: 1) tunable thermomechanical properties ( T g = 53–129 °C) through precise polyol content control; 2) substantially elevated toughness (up to 5.2 MJ m −3 ), exceeding conventional epoxy resins by >300%; and 3) rapid catalytic chemical recyclability (<4 h at 60 °C), with degradation products functioning as reusable hardeners. Practical validation via glass fiber‐reinforced composites and electronic packaging confirms robust performance with full recyclability. This integrated methodology reconciles the historical trade‐off between mechanical robustness and chemical recyclability in thermosets, establishing a viable pathway toward sustainable epoxy production.
- 29 October 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (52) , e19660
Dual Sacrificial Strategy Toward Tough and Recyclable CO 2 ‐Sourced Epoxy Thermosets
Developing thermosetting epoxy resins that concurrently deliver high performance (integrating superior strength with toughness) and chemical recyclability presents a persistent challenge in sustainable polymer advancement. Herein, we present a dual sacrificial strategy employing CO 2 ‐derived poly(ether‐carbonate) (PPC) polyols as functional epoxy hardeners. Flexible ether segments serve as sacrificial components enhancing toughness, while cleavable carbonate groups function as sacrificial sites facilitating degradation. This dual sacrificial design in PPC polyols demonstrably enhances mechanical properties while enabling degradability. Model reactions and curing kinetics analyses reveal a distinctive dual‐stage crosslinking process governed by hydroxyl transfer mechanisms. The resulting hierarchical cure yields thermosets with unconventional hyperbranched topologies embedded within uniform network structures, conferring: 1) tunable thermomechanical properties ( T g = 53–129 °C) through precise polyol content control; 2) substantially elevated toughness (up to 5.2 MJ m −3 ), exceeding conventional epoxy resins by >300%; and 3) rapid catalytic chemical recyclability (<4 h at 60 °C), with degradation products functioning as reusable hardeners. Practical validation via glass fiber‐reinforced composites and electronic packaging confirms robust performance with full recyclability. This integrated methodology reconciles the historical trade‐off between mechanical robustness and chemical recyclability in thermosets, establishing a viable pathway toward sustainable epoxy production.
- 29 October 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (52) , e19660
Dual Sacrificial Strategy Toward Tough and Recyclable CO 2 ‐Sourced Epoxy Thermosets
Developing thermosetting epoxy resins that concurrently deliver high performance (integrating superior strength with toughness) and chemical recyclability presents a persistent challenge in sustainable polymer advancement. Herein, we present a dual sacrificial strategy employing CO 2 ‐derived poly(ether‐carbonate) (PPC) polyols as functional epoxy hardeners. Flexible ether segments serve as sacrificial components enhancing toughness, while cleavable carbonate groups function as sacrificial sites facilitating degradation. This dual sacrificial design in PPC polyols demonstrably enhances mechanical properties while enabling degradability. Model reactions and curing kinetics analyses reveal a distinctive dual‐stage crosslinking process governed by hydroxyl transfer mechanisms. The resulting hierarchical cure yields thermosets with unconventional hyperbranched topologies embedded within uniform network structures, conferring: 1) tunable thermomechanical properties ( T g = 53–129 °C) through precise polyol content control; 2) substantially elevated toughness (up to 5.2 MJ m −3 ), exceeding conventional epoxy resins by >300%; and 3) rapid catalytic chemical recyclability (<4 h at 60 °C), with degradation products functioning as reusable hardeners. Practical validation via glass fiber‐reinforced composites and electronic packaging confirms robust performance with full recyclability. This integrated methodology reconciles the historical trade‐off between mechanical robustness and chemical recyclability in thermosets, establishing a viable pathway toward sustainable epoxy production.
- 28 October 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (44) , 38243-38254
Norbornene and Epoxide-Substituted Silsesquioxane Photoresists with High-Sensitivity and Stability
The evolution of photoresists has been accelerated by escalating demands for pattern fidelity, particularly with the breakthrough of extreme ultraviolet (EUV) lithography in achieving sub-20 nm resolution. Herein, we report two kinds of partially alkyl-substituted silsesquioxane (PASS) resists to overcome the dual challenges of hydrogen silsesquioxane (HSQ) in EUV applications: inherent instability and unsatisfactory sensitivity. Through strategic integration with a photoacid generator (PAG), the optimized formulation demonstrates exceptional lithographic performance, achieving 14 nm resolution (line edge roughness of 1.3 nm) with a sensitivity of 4.3 μC/cm2 and a contrast of 5.1 under electron beam lithography. Besides, the PASS resist exhibits a 360-day gelation period and a 160-fold improvement over conventional HSQ. Systematic investigations combining micro-Raman spectroscopy and model compound studies reveal that PAG enhances both sensitivity and shelf stability through dual mechanisms: (1) a photoacid-catalyzed cross-linking reaction between siloxanes and (2) nucleophilic attack inhibition at silicon centers. These advances, coupled with successful electron-beam and ultraviolet patterning demonstrations and structural tunability, establish PASS resists as viable candidates for EUV lithography in semiconductor nanofabrication.
- 28 October 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (44) , 38243-38254
Norbornene and Epoxide-Substituted Silsesquioxane Photoresists with High-Sensitivity and Stability
The evolution of photoresists has been accelerated by escalating demands for pattern fidelity, particularly with the breakthrough of extreme ultraviolet (EUV) lithography in achieving sub-20 nm resolution. Herein, we report two kinds of partially alkyl-substituted silsesquioxane (PASS) resists to overcome the dual challenges of hydrogen silsesquioxane (HSQ) in EUV applications: inherent instability and unsatisfactory sensitivity. Through strategic integration with a photoacid generator (PAG), the optimized formulation demonstrates exceptional lithographic performance, achieving 14 nm resolution (line edge roughness of 1.3 nm) with a sensitivity of 4.3 μC/cm2 and a contrast of 5.1 under electron beam lithography. Besides, the PASS resist exhibits a 360-day gelation period and a 160-fold improvement over conventional HSQ. Systematic investigations combining micro-Raman spectroscopy and model compound studies reveal that PAG enhances both sensitivity and shelf stability through dual mechanisms: (1) a photoacid-catalyzed cross-linking reaction between siloxanes and (2) nucleophilic attack inhibition at silicon centers. These advances, coupled with successful electron-beam and ultraviolet patterning demonstrations and structural tunability, establish PASS resists as viable candidates for EUV lithography in semiconductor nanofabrication.
- 26 September 2025
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 16 (41) , 4599-4605
Synthesis and degradation of terpolymers of cyclohexene oxide, cyclopentene oxide, and carbon dioxide using organoboron catalysts
This work presents a series of terpolymers of cyclohexene oxide, cyclopentene oxide, and carbon dioxide, synthesized using organoboron catalysts that exhibit high conversion and selectivity.
- 26 September 2025
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 16 (41) , 4599-4605
Synthesis and degradation of terpolymers of cyclohexene oxide, cyclopentene oxide, and carbon dioxide using organoboron catalysts
This work presents a series of terpolymers of cyclohexene oxide, cyclopentene oxide, and carbon dioxide, synthesized using organoboron catalysts that exhibit high conversion and selectivity.
- 15 September 2025
- Published by Wiley in Angewandte Chemie
- Vol. 137 (46)
Multi‐Site Organoboron Catalysts Enable Sequence‐Regulated Terpolymerization of Epoxides, CO 2 , and β ‐Propiolactone via Intermolecular Chain Shuttling
Sequence regulation in synthetic polymers is essential for tailoring material properties; however, achieving precise control in polycarbonate‐polyhydroxyalkanoate (PC‐PHA) terpolymers derived from epoxides, CO 2 , and β ‐lactones remains challenging. Current metal‐based catalysts lack multisite strategies for sequence diversification, limiting the formation of gradient architectures. This study employed mononuclear (catalyst 1 ) and dinuclear (catalyst 2 ) organoboron catalysts to mediate the terpolymerization of epoxides, CO 2 , and β ‐propiolactone (BPL). Kinetic analysis, NMR spectroscopy, and a chain‐shuttling approach with mixed catalysts were utilized to regulate sequences. Key findings indicated: i) Catalyst 1 preferentially promoted β ‐propiolactone ring‐opening polymerization (ROP), forming tapered P3HP‐ b ‐PC blocks, whereas catalyst 2 enhanced epoxide/CO 2 ring‐opening copolymerization (ROCOP), yielding PC‐ b ‐P3HP; ii) Boron centers kinetically suppressed ROP but increased ROCOP efficiency; iii) Mixed 1 and 2 catalysts enabled intermolecular chain shuttling, synthesizing gradient PC‐ grad ‐P3HP terpolymers; and iv) Terpolymer compositions modulated thermal properties from amorphous to crystalline. This work establishes the first metal‐free, chain‐shuttling platform for sequence‐regulated PC‐PHA terpolymers, extending the scope of programmable biodegradable materials beyond metal‐catalyzed systems.
- 15 September 2025
- Published by Wiley in Angewandte Chemie
- Vol. 137 (46)
Multi‐Site Organoboron Catalysts Enable Sequence‐Regulated Terpolymerization of Epoxides, CO 2 , and β ‐Propiolactone via Intermolecular Chain Shuttling
Sequence regulation in synthetic polymers is essential for tailoring material properties; however, achieving precise control in polycarbonate‐polyhydroxyalkanoate (PC‐PHA) terpolymers derived from epoxides, CO 2 , and β ‐lactones remains challenging. Current metal‐based catalysts lack multisite strategies for sequence diversification, limiting the formation of gradient architectures. This study employed mononuclear (catalyst 1 ) and dinuclear (catalyst 2 ) organoboron catalysts to mediate the terpolymerization of epoxides, CO 2 , and β ‐propiolactone (BPL). Kinetic analysis, NMR spectroscopy, and a chain‐shuttling approach with mixed catalysts were utilized to regulate sequences. Key findings indicated: i) Catalyst 1 preferentially promoted β ‐propiolactone ring‐opening polymerization (ROP), forming tapered P3HP‐ b ‐PC blocks, whereas catalyst 2 enhanced epoxide/CO 2 ring‐opening copolymerization (ROCOP), yielding PC‐ b ‐P3HP; ii) Boron centers kinetically suppressed ROP but increased ROCOP efficiency; iii) Mixed 1 and 2 catalysts enabled intermolecular chain shuttling, synthesizing gradient PC‐ grad ‐P3HP terpolymers; and iv) Terpolymer compositions modulated thermal properties from amorphous to crystalline. This work establishes the first metal‐free, chain‐shuttling platform for sequence‐regulated PC‐PHA terpolymers, extending the scope of programmable biodegradable materials beyond metal‐catalyzed systems.
- 15 September 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (46) , e202517263
Multi‐Site Organoboron Catalysts Enable Sequence‐Regulated Terpolymerization of Epoxides, CO 2 , and β ‐Propiolactone via Intermolecular Chain Shuttling
Sequence regulation in synthetic polymers is essential for tailoring material properties; however, achieving precise control in polycarbonate‐polyhydroxyalkanoate (PC‐PHA) terpolymers derived from epoxides, CO 2 , and β ‐lactones remains challenging. Current metal‐based catalysts lack multisite strategies for sequence diversification, limiting the formation of gradient architectures. This study employed mononuclear (catalyst 1 ) and dinuclear (catalyst 2 ) organoboron catalysts to mediate the terpolymerization of epoxides, CO 2 , and β ‐propiolactone (BPL). Kinetic analysis, NMR spectroscopy, and a chain‐shuttling approach with mixed catalysts were utilized to regulate sequences. Key findings indicated: i) Catalyst 1 preferentially promoted β ‐propiolactone ring‐opening polymerization (ROP), forming tapered P3HP‐ b ‐PC blocks, whereas catalyst 2 enhanced epoxide/CO 2 ring‐opening copolymerization (ROCOP), yielding PC‐ b ‐P3HP; ii) Boron centers kinetically suppressed ROP but increased ROCOP efficiency; iii) Mixed 1 and 2 catalysts enabled intermolecular chain shuttling, synthesizing gradient PC‐ grad ‐P3HP terpolymers; and iv) Terpolymer compositions modulated thermal properties from amorphous to crystalline. This work establishes the first metal‐free, chain‐shuttling platform for sequence‐regulated PC‐PHA terpolymers, extending the scope of programmable biodegradable materials beyond metal‐catalyzed systems.
- 15 September 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (46) , e202517263
Multi‐Site Organoboron Catalysts Enable Sequence‐Regulated Terpolymerization of Epoxides, CO 2 , and β ‐Propiolactone via Intermolecular Chain Shuttling
Sequence regulation in synthetic polymers is essential for tailoring material properties; however, achieving precise control in polycarbonate‐polyhydroxyalkanoate (PC‐PHA) terpolymers derived from epoxides, CO 2 , and β ‐lactones remains challenging. Current metal‐based catalysts lack multisite strategies for sequence diversification, limiting the formation of gradient architectures. This study employed mononuclear (catalyst 1 ) and dinuclear (catalyst 2 ) organoboron catalysts to mediate the terpolymerization of epoxides, CO 2 , and β ‐propiolactone (BPL). Kinetic analysis, NMR spectroscopy, and a chain‐shuttling approach with mixed catalysts were utilized to regulate sequences. Key findings indicated: i) Catalyst 1 preferentially promoted β ‐propiolactone ring‐opening polymerization (ROP), forming tapered P3HP‐ b ‐PC blocks, whereas catalyst 2 enhanced epoxide/CO 2 ring‐opening copolymerization (ROCOP), yielding PC‐ b ‐P3HP; ii) Boron centers kinetically suppressed ROP but increased ROCOP efficiency; iii) Mixed 1 and 2 catalysts enabled intermolecular chain shuttling, synthesizing gradient PC‐ grad ‐P3HP terpolymers; and iv) Terpolymer compositions modulated thermal properties from amorphous to crystalline. This work establishes the first metal‐free, chain‐shuttling platform for sequence‐regulated PC‐PHA terpolymers, extending the scope of programmable biodegradable materials beyond metal‐catalyzed systems.