Erik A. B. Hughes
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Erik A. B. Hughes has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Liam Michael Grover
Healthcare Technologies Institute, School of Chemical Engineering, University of Birmingham, Birmingham, UK
6 shared publications - Richard L. Williams
School of Chemical Engineering, University of Birmingham, Birmingham, B15 2TT, UK
3 shared publications - Miruna Chipara
University of Birmingham, Chemical Engineering, Birmingham, United Kingdom
2 shared publications - Sophie Constance Cox
School of Chemical Engineering, University of Birmingham, Birmingham, UK
2 shared publications Andrew Parkes
School of Metallurgy and Materials, University of Birmingham, Birmingham, UK
1 shared publication- David Bassett
Department of Physics, NTNU, Norwegian University of Science and Technology, 7491 Trondheim, Norway
1 shared publication
Latest Publications
- Open Access
- 14 October 2021
- Published by Springer Nature in Communications Chemistry
- Vol. 4 (1) , 1-8
Controlled self-assembly of chemical gardens enables fabrication of heterogeneous chemobrionic materials
Chemical gardens are an example of a chemobrionic system that typically result in abiotic macro-, micro- and nano- material architectures, with formation driven by complex out-of-equilibrium reaction mechanisms. From a technological perspective, controlling chemobrionic processes may hold great promise for the creation of novel, compositionally diverse and ultimately, useful materials and devices. In this work, we engineer an innovative custom-built liquid exchange unit that enables us to control the formation of tubular chemical garden structures grown from the interface between calcium loaded hydrogel and phosphate solution. We show that systematic displacement of phosphate solution with water (H2O) can halt self-assembly, precisely control tube height and purify structures in situ. Furthermore, we demonstrate the fabrication of a heterogeneous chemobrionic composite material composed of aligned, high-aspect ratio calcium phosphate channels running through an otherwise dense matrix of poly(2-hydroxyethyl methacrylate) (pHEMA). Given that the principles we derive can be broadly applied to potentially control various chemobrionic systems, this work paves the way for fabricating multifunctional materials that may hold great potential in a variety of application areas, such as regenerative medicine, catalysis and microfluidics.
- 14 October 2021
- Published by Springer Nature in Communications Chemistry
- Vol. 4 (1) , 1-8
Open AccessControlled self-assembly of chemical gardens enables fabrication of heterogeneous chemobrionic materials
Chemical gardens are an example of a chemobrionic system that typically result in abiotic macro-, micro- and nano- material architectures, with formation driven by complex out-of-equilibrium reaction mechanisms. From a technological perspective, controlling chemobrionic processes may hold great promise for the creation of novel, compositionally diverse and ultimately, useful materials and devices. In this work, we engineer an innovative custom-built liquid exchange unit that enables us to control the formation of tubular chemical garden structures grown from the interface between calcium loaded hydrogel and phosphate solution. We show that systematic displacement of phosphate solution with water (H2O) can halt self-assembly, precisely control tube height and purify structures in situ. Furthermore, we demonstrate the fabrication of a heterogeneous chemobrionic composite material composed of aligned, high-aspect ratio calcium phosphate channels running through an otherwise dense matrix of poly(2-hydroxyethyl methacrylate) (pHEMA). Given that the principles we derive can be broadly applied to potentially control various chemobrionic systems, this work paves the way for fabricating multifunctional materials that may hold great potential in a variety of application areas, such as regenerative medicine, catalysis and microfluidics.
- Open Access
- 22 January 2021
- Published by Wiley in ChemSystemsChem
- Vol. 3 (4)
Exploring the Formation of Calcium Orthophosphate‐Pyrophosphate Chemical Gardens
Chemical gardens are characterised by the self‐assembly of mineralised abiotic architectures. Utilising the fundamental building blocks of bone mineral, namely calcium and orthophosphate ions, chemical gardens that recapitulate microstructural and compositional features of hard tissue can be grown. Interplay between orthophosphate and pyrophosphate species is highly relevant to natural mineral deposition processes, though this has yet to be explored in the context of generating biologically relevant chemical gardens. Here, tubular calcium orthophosphate‐pyrophosphate chemical gardens were grown from the interface between calcium loaded hydrogels ([Ca 2+ ]=1 M) layered with different orthophosphate‐pyrophosphate solutions ([Pi]+[PPi]=0.7 M). We determine the effect of solution pyrophosphate content on chemical garden morphology and growth rate. Extracted structures were analysed by means of powder X‐ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM) and X‐ray fluorescence spectroscopy (XRF), revealing orthophosphate‐pyrophosphate solution dependent differences in precipitated mineral crystallinity, composition and microstructure, respectively. Lastly, the potential application of the structures is discussed in the context of tissue engineering and regenerative medicine.
- 22 January 2021
- Published by Wiley in ChemSystemsChem
- Vol. 3 (4)
Open AccessExploring the Formation of Calcium Orthophosphate‐Pyrophosphate Chemical Gardens
Chemical gardens are characterised by the self‐assembly of mineralised abiotic architectures. Utilising the fundamental building blocks of bone mineral, namely calcium and orthophosphate ions, chemical gardens that recapitulate microstructural and compositional features of hard tissue can be grown. Interplay between orthophosphate and pyrophosphate species is highly relevant to natural mineral deposition processes, though this has yet to be explored in the context of generating biologically relevant chemical gardens. Here, tubular calcium orthophosphate‐pyrophosphate chemical gardens were grown from the interface between calcium loaded hydrogels ([Ca 2+ ]=1 M) layered with different orthophosphate‐pyrophosphate solutions ([Pi]+[PPi]=0.7 M). We determine the effect of solution pyrophosphate content on chemical garden morphology and growth rate. Extracted structures were analysed by means of powder X‐ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM) and X‐ray fluorescence spectroscopy (XRF), revealing orthophosphate‐pyrophosphate solution dependent differences in precipitated mineral crystallinity, composition and microstructure, respectively. Lastly, the potential application of the structures is discussed in the context of tissue engineering and regenerative medicine.
- Open Access
- 4 December 2019
- Published by Royal Society of Chemistry (RSC) in Biomaterials Science
- Vol. 8 (3) , 812-822
Chemobrionic structures in tissue engineering: self-assembling calcium phosphate tubes as cellular scaffolds
A diverse range of complex patterns and mineralised hierarchical microstructures can be derived from chemobrionic systems, with formation driven by complex reaction–diffusion mechanisms far from thermodynamic equilibrium. In these experiments, self-assembling calcium phosphate tubes are generated using hydrogels made with 1 M calcium solutions layered with solutions of dibasic sodium phosphate over a range of concentrations between 0.2–1 M. Self-assembling structures prepared using 0.8 M dibasic sodium phosphate solutions were selected to assess cell–material interactions. Candidate chemobrionic scaffolds were characterised by micro-X-Ray fluorescence (μ-XRF) spectroscopy, Raman spectroscopy, powder X-ray diffraction (XRD), helium pycnometry and scanning electron microscopy (SEM). As prepared tubes were formed from non-stoichiometric hydroxyapatite (HA, Ca10−x(PO4)6−x(HPO4)x(OH)2−x (0 ≤ x ≤ 1)), which was confirmed as calcium deficient hydroxyapatite (CDHA, Ca9(PO4)5HPO4OH). Thermal treatment of tubes in air at 650 °C for 4 h converted the structures to beta tricalcium phosphate (β-TCP, β-Ca3(PO4)2). The potential of these scaffolds to support the attachment of bone marrow derived mesenchymal stem cells (BMSCs) was investigated for the first time, and we demonstrate cell attachment and elongation on the fabricated tubular structures.
- 4 December 2019
- Published by Royal Society of Chemistry (RSC) in Biomaterials Science
- Vol. 8 (3) , 812-822
Open AccessChemobrionic structures in tissue engineering: self-assembling calcium phosphate tubes as cellular scaffolds
A diverse range of complex patterns and mineralised hierarchical microstructures can be derived from chemobrionic systems, with formation driven by complex reaction–diffusion mechanisms far from thermodynamic equilibrium. In these experiments, self-assembling calcium phosphate tubes are generated using hydrogels made with 1 M calcium solutions layered with solutions of dibasic sodium phosphate over a range of concentrations between 0.2–1 M. Self-assembling structures prepared using 0.8 M dibasic sodium phosphate solutions were selected to assess cell–material interactions. Candidate chemobrionic scaffolds were characterised by micro-X-Ray fluorescence (μ-XRF) spectroscopy, Raman spectroscopy, powder X-ray diffraction (XRD), helium pycnometry and scanning electron microscopy (SEM). As prepared tubes were formed from non-stoichiometric hydroxyapatite (HA, Ca10−x(PO4)6−x(HPO4)x(OH)2−x (0 ≤ x ≤ 1)), which was confirmed as calcium deficient hydroxyapatite (CDHA, Ca9(PO4)5HPO4OH). Thermal treatment of tubes in air at 650 °C for 4 h converted the structures to beta tricalcium phosphate (β-TCP, β-Ca3(PO4)2). The potential of these scaffolds to support the attachment of bone marrow derived mesenchymal stem cells (BMSCs) was investigated for the first time, and we demonstrate cell attachment and elongation on the fabricated tubular structures.
- Open Access
- 1 November 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 7 (47) , 7460-7470
Critical and diverse roles of phosphates in human bone formation
The interconnecting roles of phosphates in bone mineral formation.
- 1 November 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 7 (47) , 7460-7470
Open AccessCritical and diverse roles of phosphates in human bone formation
The interconnecting roles of phosphates in bone mineral formation.
- Open Access
- 1 January 2018
- Published by SAGE Publications in Journal of Tissue Engineering
- Vol. 9
Formulation of a covalently bonded hydroxyapatite and poly(ether ether ketone) composite
Spinal fusion devices can be fabricated from composites based on combining hydroxyapatite and poly(ether ether ketone) phases. These implants serve as load-bearing scaffolds for the formation of new bone tissue between adjacent vertebrae. In this work, we report a novel approach to covalently bond hydroxyapatite and poly(ether ether ketone) to produce a novel composite formulation with enhanced interfacial adhesion between phases. Compared to non-linked composites (HA_PEEK), covalently linked composites (HA_L_PEEK), loaded with 1.25 vol% hydroxyapatite, possessed a greater mean flexural strength (170 ± 5.4 vs 171.7 ± 14.8 MPa (mean ± SD)) and modulus (4.8 ± 0.2 vs 5.0 ± 0.3 GPa (mean ± SD)). Although the mechanical properties were not found to be significantly different (p > 0.05), PEEK_L_HA contained substantially larger hydroxyapatite inclusions (100–1000 µm) compared to HA_PEEK (50–200 µm), due to the inherently agglomerative nature of the covalently bonded hydroxyapatite and poly(ether ether ketone) additive. Larger inclusions would expectedly weaken the HA_L_PEEK composite; however, there is no significant difference between the flexural modulus of poly(ether ether ketone) with respect to HA_L_PEEK (p = 0.13). In addition, the flexural modulus of HA_PEEK is significantly lower compared to poly(ether ether ketone) (p = 0.03). Ultimately, covalent linking reduces hydroxyapatite particulate de-bonding from the polymeric matrix and inhibits micro-crack development, culminating in enhanced transfer of stiffness between hydroxyapatite and poly(ether ether ketone) under loading.
- 1 January 2018
- Published by SAGE Publications in Journal of Tissue Engineering
- Vol. 9
Open AccessFormulation of a covalently bonded hydroxyapatite and poly(ether ether ketone) composite
Spinal fusion devices can be fabricated from composites based on combining hydroxyapatite and poly(ether ether ketone) phases. These implants serve as load-bearing scaffolds for the formation of new bone tissue between adjacent vertebrae. In this work, we report a novel approach to covalently bond hydroxyapatite and poly(ether ether ketone) to produce a novel composite formulation with enhanced interfacial adhesion between phases. Compared to non-linked composites (HA_PEEK), covalently linked composites (HA_L_PEEK), loaded with 1.25 vol% hydroxyapatite, possessed a greater mean flexural strength (170 ± 5.4 vs 171.7 ± 14.8 MPa (mean ± SD)) and modulus (4.8 ± 0.2 vs 5.0 ± 0.3 GPa (mean ± SD)). Although the mechanical properties were not found to be significantly different (p > 0.05), PEEK_L_HA contained substantially larger hydroxyapatite inclusions (100–1000 µm) compared to HA_PEEK (50–200 µm), due to the inherently agglomerative nature of the covalently bonded hydroxyapatite and poly(ether ether ketone) additive. Larger inclusions would expectedly weaken the HA_L_PEEK composite; however, there is no significant difference between the flexural modulus of poly(ether ether ketone) with respect to HA_L_PEEK (p = 0.13). In addition, the flexural modulus of HA_PEEK is significantly lower compared to poly(ether ether ketone) (p = 0.03). Ultimately, covalent linking reduces hydroxyapatite particulate de-bonding from the polymeric matrix and inhibits micro-crack development, culminating in enhanced transfer of stiffness between hydroxyapatite and poly(ether ether ketone) under loading.
- Open Access
- 19 May 2017
- Published by American Association for the Advancement of Science (AAAS) in Biomaterials Research
- Vol. 21 (1) , 1-11
Characterisation of a novel poly (ether ether ketone)/calcium sulphate composite for bone augmentation
Background: Calcium sulphate (CS) has been used in bone grafting since the 1800s. It has not replaced autograft as the gold standard, however, since its dissolution occurs rapidly in bodily fluids, meaning that the material cannot support long-term bone growth. Here, the polymer poly (ether ether ketone) (PEEK) was used to slow dissolution in in vitro physiological environments and augment the mechanical properties of the material. Methods: PEEK/CS specimens were fabricated by combining powders of PEEK and CS with water, resulting in a hardening paste. To enhance physical interactions between phases, cylindrical specimens were heat-treated to melt and fuse the PEEK. Following analysis of physical and chemical interactions by SEM and FT-IR respectively, dynamic ageing in PBS and compression testing was undertaken to measure how the PEEK influenced the mechanical properties of the final parts. Changes in structure and chemistry were determined using helium pycnometry, SEM and analysis of powder XRD patterns. Results: Powders of PEEK and CS hemihydrate (CSH) (CaSO 4 .0.5H 2 O) were combined with PEEK at 0 wt%, 2.5 wt%, 20 wt%, 40 wt% and 80 wt% and at a P:L ratio of 0.85 g/mL. The subsequently hardened structures were heat-treated, which initiated the melting of PEEK and dehydration of CSD (CaSO 4 .2H 2 O) to the CS anhydrite (CSA) (CaSO 4 ) phase, which changed colour and apparent volume. FT-IR and SEM analysis revealed heat treatment of PEEK/CS specimens facilitated both physical and chemical interactions between phases. Over a period of 21 days of ageing in PBS, the hydration of CS was determined by XRD and improved specimen longevity at all levels of PEEK wt% loading was measured compared with the control. Importantly, increasing PEEK wt% loading resulted in a marked increase in the mechanical properties of PEEK/CS specimens in terms of both compressive strength and modulus. Conclusions: Reinforcement of CS with PEEK significantly enhanced in vitro dissolution resistance, in addition to enhancing mechanical properties. This composite therefore has significant future potential as a bone graft replacement.
- 19 May 2017
- Published by American Association for the Advancement of Science (AAAS) in Biomaterials Research
- Vol. 21 (1) , 1-11
Open AccessCharacterisation of a novel poly (ether ether ketone)/calcium sulphate composite for bone augmentation
Background: Calcium sulphate (CS) has been used in bone grafting since the 1800s. It has not replaced autograft as the gold standard, however, since its dissolution occurs rapidly in bodily fluids, meaning that the material cannot support long-term bone growth. Here, the polymer poly (ether ether ketone) (PEEK) was used to slow dissolution in in vitro physiological environments and augment the mechanical properties of the material. Methods: PEEK/CS specimens were fabricated by combining powders of PEEK and CS with water, resulting in a hardening paste. To enhance physical interactions between phases, cylindrical specimens were heat-treated to melt and fuse the PEEK. Following analysis of physical and chemical interactions by SEM and FT-IR respectively, dynamic ageing in PBS and compression testing was undertaken to measure how the PEEK influenced the mechanical properties of the final parts. Changes in structure and chemistry were determined using helium pycnometry, SEM and analysis of powder XRD patterns. Results: Powders of PEEK and CS hemihydrate (CSH) (CaSO 4 .0.5H 2 O) were combined with PEEK at 0 wt%, 2.5 wt%, 20 wt%, 40 wt% and 80 wt% and at a P:L ratio of 0.85 g/mL. The subsequently hardened structures were heat-treated, which initiated the melting of PEEK and dehydration of CSD (CaSO 4 .2H 2 O) to the CS anhydrite (CSA) (CaSO 4 ) phase, which changed colour and apparent volume. FT-IR and SEM analysis revealed heat treatment of PEEK/CS specimens facilitated both physical and chemical interactions between phases. Over a period of 21 days of ageing in PBS, the hydration of CS was determined by XRD and improved specimen longevity at all levels of PEEK wt% loading was measured compared with the control. Importantly, increasing PEEK wt% loading resulted in a marked increase in the mechanical properties of PEEK/CS specimens in terms of both compressive strength and modulus. Conclusions: Reinforcement of CS with PEEK significantly enhanced in vitro dissolution resistance, in addition to enhancing mechanical properties. This composite therefore has significant future potential as a bone graft replacement.
- Open Access
- 10 February 2017
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 33 (8) , 2059-2067
Biologically Analogous Calcium Phosphate Tubes from a Chemical Garden
Calcium phosphate (CaPO4) tubes with features comparable to mineralized biological microstructures, such as Haversian canals, were grown from a calcium gel/phosphate solution chemical garden system. A significant difference in gel mass in response to high and low solute phosphate equivalent environments existed within 30 min of solution layering upon gel (p = 0.0067), suggesting that the nature of advective movement between gel and solution is dependent on the solution concentration. The transport of calcium cations (Ca2+) and phosphate anions (PO43–) was quantified and changes in pH were monitored to explain the preferential formation of tubes within a PO43– concentration range of 0.5–1.25 M. Ingress from the anionic solution phase into the gel followed by the liberation of Ca2+ ions from the gel was found to be essential for acquiring self-assembled tubular CaPO4 structures. Tube analysis by scanning electron microscopy (SEM), X-ray diffraction (XRD), and micro X-ray florescence (μ-XRF) revealed hydroxyapatite (HA, Ca10(PO4)6(OH)2) and dicalcium phosphate dihydrate (DCPD, CaHPO4·2H2O) phases organized in a hierarchical manner. Notably, the tubule diameters ranged from 100 to 150 μm, an ideal size for the permeation of vasculature in biological hard tissue.
- 10 February 2017
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 33 (8) , 2059-2067
Open AccessBiologically Analogous Calcium Phosphate Tubes from a Chemical Garden
Calcium phosphate (CaPO4) tubes with features comparable to mineralized biological microstructures, such as Haversian canals, were grown from a calcium gel/phosphate solution chemical garden system. A significant difference in gel mass in response to high and low solute phosphate equivalent environments existed within 30 min of solution layering upon gel (p = 0.0067), suggesting that the nature of advective movement between gel and solution is dependent on the solution concentration. The transport of calcium cations (Ca2+) and phosphate anions (PO43–) was quantified and changes in pH were monitored to explain the preferential formation of tubes within a PO43– concentration range of 0.5–1.25 M. Ingress from the anionic solution phase into the gel followed by the liberation of Ca2+ ions from the gel was found to be essential for acquiring self-assembled tubular CaPO4 structures. Tube analysis by scanning electron microscopy (SEM), X-ray diffraction (XRD), and micro X-ray florescence (μ-XRF) revealed hydroxyapatite (HA, Ca10(PO4)6(OH)2) and dicalcium phosphate dihydrate (DCPD, CaHPO4·2H2O) phases organized in a hierarchical manner. Notably, the tubule diameters ranged from 100 to 150 μm, an ideal size for the permeation of vasculature in biological hard tissue.