Clarice Garcia Borges Demétrio
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Clarice Garcia Borges Demétrio has a total of 239 co-authors. Here are the top co-authors by number of shared publications:
- Rafael de Andrade Moral
Department of Mathematics and Statistics Maynooth University Maynooth Ireland
17 shared publications - Italo Delalibera
University of São Paulo – Luiz de Queiroz College of Agriculture
14 shared publications - Geert Verbeke
L-Biostat, KU Leuven, Leuven, Belgium
9 shared publications John Hinde
School of Mathematics, Statistics, and Applied Mathematics, NUI Galway
9 shared publicationsGeert Molenberghs
Interuniversity Institute for Biostatistics and Statistical Bioinformatics, KU Leuven and Universiteit Hasselt, Leuven, Belgium
6 shared publications- Afrânio Márcio Corrêa Vieira
Universidade Federal de São Carlos
5 shared publications
Latest Publications
- 26 March 2026
- Published by Springer Nature in Journal of Forestry Research
- Vol. 37 (1)
Correction: Modeling Pinus tree taper data using mixed-effects models
- 26 March 2026
- Published by Springer Nature in Journal of Forestry Research
- Vol. 37 (1)
Correction: Modeling Pinus tree taper data using mixed-effects models
- Open Access
- 21 October 2025
- Published by Universidade Estadual de Maringa in Acta Scientiarum. Agronomy
- Vol. 48 (1) , e76526
A mixed-effects model approach to height–diameter relationships
Height–diameter models are widely used to estimate tree height from diameter at breast height (DBH) and play a crucial role in forest inventories by reducing fieldwork effort. However, statistical challenges such as nonlinearity, heteroscedasticity, nonnormality, and outliers can compromise model accuracy. To address these issues, this study proposes a generalization of Scolforo’s height‒diameter model (Scolforo, 1998), which incorporates random effects to improve flexibility and fit. With observational data from Eucalyptus urograndis plantations, we present a step-by-step framework for model fitting, inference, and validation. Our approach considers hierarchical structures and variability across stands to improve predictive performance. To rigorously assess model adequacy, we conducted a simulation study under various scenarios, evaluating goodness-of-fit with deviance, randomized quantile residuals, and least-confounded residuals. These diagnostics identify misspecification and enable robust parameter estimation. Additionally, we provide a detailed tutorial (Appendix B) for implementing the model in R that encompasses (i) inference for fixed and random effects, (ii) local influence analysis to detect sensitive observations, and (iii) residual-based diagnostics adapted to mixed models. Our results reveal the adaptability of the model to complex data structures while maintaining interpretability. The proposed framework provides forest researchers a reliable tool for height prediction that combines theoretical rigor and practical applicability. The accompanying R tutorial increases reproducibility and facilitates the integration of the framework into forest inventory workflows.
- 21 October 2025
- Published by Universidade Estadual de Maringa in Acta Scientiarum. Agronomy
- Vol. 48 (1) , e76526
Open AccessA mixed-effects model approach to height–diameter relationships
Height–diameter models are widely used to estimate tree height from diameter at breast height (DBH) and play a crucial role in forest inventories by reducing fieldwork effort. However, statistical challenges such as nonlinearity, heteroscedasticity, nonnormality, and outliers can compromise model accuracy. To address these issues, this study proposes a generalization of Scolforo’s height‒diameter model (Scolforo, 1998), which incorporates random effects to improve flexibility and fit. With observational data from Eucalyptus urograndis plantations, we present a step-by-step framework for model fitting, inference, and validation. Our approach considers hierarchical structures and variability across stands to improve predictive performance. To rigorously assess model adequacy, we conducted a simulation study under various scenarios, evaluating goodness-of-fit with deviance, randomized quantile residuals, and least-confounded residuals. These diagnostics identify misspecification and enable robust parameter estimation. Additionally, we provide a detailed tutorial (Appendix B) for implementing the model in R that encompasses (i) inference for fixed and random effects, (ii) local influence analysis to detect sensitive observations, and (iii) residual-based diagnostics adapted to mixed models. Our results reveal the adaptability of the model to complex data structures while maintaining interpretability. The proposed framework provides forest researchers a reliable tool for height prediction that combines theoretical rigor and practical applicability. The accompanying R tutorial increases reproducibility and facilitates the integration of the framework into forest inventory workflows.
- 18 September 2023
- Published by Elsevier in Science of The Total Environment
- Vol. 905, 167041
Modeling hormesis using multivariate nonlinear regression in plant biology: A comprehensive approach to understanding dose-response relationships
- 18 September 2023
- Published by Elsevier in Science of The Total Environment
- Vol. 905, 167041
Modeling hormesis using multivariate nonlinear regression in plant biology: A comprehensive approach to understanding dose-response relationships
- Open Access
- 12 May 2023
- Published by Wiley in Biometrical Journal
- Vol. 65 (7) , e2200284
Exposing the confounding in experimental designs to understand and evaluate them, and formulating linear mixed models for analyzing the data from a designed experiment
Comparative experiments involve the allocation of treatments to units, ideally by randomization. This necessarily confounds treatment information with unit information, which we distinguish from the other forms of information blending, in particular aliasing and marginality. We outline a factor‐allocation paradigm for describing experimental designs with the aim of (i) exhibiting the confounding in a design, using analysis‐of‐variance‐like tables, so as to understand and evaluate the design and (ii) formulating a linear mixed model based on the factor allocation that the design involves. The approach exhibits the dispersal of treatments information between units sources, allows designers a choice in the strategy that they adopt for including block‐treatment interactions, clarifies differences between experiments, accommodates systematic allocation of factors, and provides a consolidated analysis of nonorthogonal designs. It provides insights into the process of designing experiments and issues that commonly arise with designs. The paradigm has pedagogical advantages and is implemented using the R package dae.
- 12 May 2023
- Published by Wiley in Biometrical Journal
- Vol. 65 (7) , e2200284
Open AccessExposing the confounding in experimental designs to understand and evaluate them, and formulating linear mixed models for analyzing the data from a designed experiment
Comparative experiments involve the allocation of treatments to units, ideally by randomization. This necessarily confounds treatment information with unit information, which we distinguish from the other forms of information blending, in particular aliasing and marginality. We outline a factor‐allocation paradigm for describing experimental designs with the aim of (i) exhibiting the confounding in a design, using analysis‐of‐variance‐like tables, so as to understand and evaluate the design and (ii) formulating a linear mixed model based on the factor allocation that the design involves. The approach exhibits the dispersal of treatments information between units sources, allows designers a choice in the strategy that they adopt for including block‐treatment interactions, clarifies differences between experiments, accommodates systematic allocation of factors, and provides a consolidated analysis of nonorthogonal designs. It provides insights into the process of designing experiments and issues that commonly arise with designs. The paradigm has pedagogical advantages and is implemented using the R package dae.
- 21 March 2023
- Published by Taylor & Francis in Biocontrol Science and Technology
- Vol. 33 (4) , 366-382
The potential of using Metarhizium anisopliae and Metarhizium humberi to control the Asian soybean rust caused by Phakopsora pachyrhizi
Phakopsora pachyrhizi causes Asian soybean rust, resulting in severe losses of soybean yield. This study assessed the biocontrol efficacy of cell-free culture filtrates and conidial suspensions of Metarhizium anisopliae (MABR-01) and M. humberi (MHBR-03) against P. pachyrhizi in vitro and in planta. A 50% concentration of culture filtrates of M. anisopliae and M. humberi inhibited the germination of P. pachyrhizi urediniospores by 85 and 96%, respectively, compared to the 50% potato-dextrose broth (PDB) control. The conidial suspensions caused no inhibition of P. pachyrhizi in vitro, but the conidial suspension of M. anisopliae controlled the rust disease in plants with a 51% efficiency. Soybean plants colonised by M. anisopliae MABR-01 and exposed to P. pachyrhizi showed less severe disease in the shoots compared to plants not colonised by M. anisopliae; the disease was reduced by 40%. Spraying plants with 50 and 75% culture filtrates of M. humberi and a 75% concentration of M. anisopliae significantly reduced rust disease, by an average of 86%. Plants pretreated with Metarhizium culture filtrates showed a 30% reduction in P. pachyrhizi colonisation based on qPCR quantification of the pathogen genomic DNA. These results indicate a high biotechnological and sustainable potential of these two Metarhizium species for control of Asian soybean rust.
- 21 March 2023
- Published by Taylor & Francis in Biocontrol Science and Technology
- Vol. 33 (4) , 366-382
The potential of using Metarhizium anisopliae and Metarhizium humberi to control the Asian soybean rust caused by Phakopsora pachyrhizi
Phakopsora pachyrhizi causes Asian soybean rust, resulting in severe losses of soybean yield. This study assessed the biocontrol efficacy of cell-free culture filtrates and conidial suspensions of Metarhizium anisopliae (MABR-01) and M. humberi (MHBR-03) against P. pachyrhizi in vitro and in planta. A 50% concentration of culture filtrates of M. anisopliae and M. humberi inhibited the germination of P. pachyrhizi urediniospores by 85 and 96%, respectively, compared to the 50% potato-dextrose broth (PDB) control. The conidial suspensions caused no inhibition of P. pachyrhizi in vitro, but the conidial suspension of M. anisopliae controlled the rust disease in plants with a 51% efficiency. Soybean plants colonised by M. anisopliae MABR-01 and exposed to P. pachyrhizi showed less severe disease in the shoots compared to plants not colonised by M. anisopliae; the disease was reduced by 40%. Spraying plants with 50 and 75% culture filtrates of M. humberi and a 75% concentration of M. anisopliae significantly reduced rust disease, by an average of 86%. Plants pretreated with Metarhizium culture filtrates showed a 30% reduction in P. pachyrhizi colonisation based on qPCR quantification of the pathogen genomic DNA. These results indicate a high biotechnological and sustainable potential of these two Metarhizium species for control of Asian soybean rust.
- Open Access
- 8 March 2021
- Published by Frontiers Media SA in Frontiers in Fungal Biology
- Vol. 2
UV-B Radiation Tolerance and Temperature-Dependent Activity Within the Entomopathogenic Fungal Genus Metarhizium in Brazil
Metarhizium comprises a phylogenetically diverse genus of entomopathogenic fungi. In Brazil, Metarhizium anisopliae s.str. subclade Mani 2 is predominantly isolated from insects, while M. robertsii and M. brunneum mostly occur in the soil environment. Solar radiation and high temperatures are important abiotic factors that can be detrimental to fungal propagules. We hypothesized that among 12 Brazilian isolates of Metarhizium spp., M. anisopliae Mani 2 (n = 6), being adapted to abiotic conditions of the phylloplane, is more tolerant to UV light and high temperatures than M. robertsii (n = 3) and M. brunneum (n = 3). Inoculum of each isolate was exposed to UV-B for up to 8 h and viability evaluated 48 h later. After 8 h under UV-B, most of the isolates had germination rates below 5%. Discs of mycelia were incubated at different temperatures, and diameter of colonies were recorded for 12 days. Mycelia of M. robertsii isolates grew faster at 33 °C, while M. anisopliae and M. brunneum grew most at 25 °C. Dry conidia were incubated at 20, 25 or 40 °C for 12 days, and then viabilities were examined. At 40 °C, conidia of five M. anisopliae isolates were the most tolerant. In the three experiments, considerable intra- and inter-specific variability was detected. The results indicate that conclusions about tolerance to these abiotic factors should be made only at the isolate level.
- 8 March 2021
- Published by Frontiers Media SA in Frontiers in Fungal Biology
- Vol. 2
Open AccessUV-B Radiation Tolerance and Temperature-Dependent Activity Within the Entomopathogenic Fungal Genus Metarhizium in Brazil
Metarhizium comprises a phylogenetically diverse genus of entomopathogenic fungi. In Brazil, Metarhizium anisopliae s.str. subclade Mani 2 is predominantly isolated from insects, while M. robertsii and M. brunneum mostly occur in the soil environment. Solar radiation and high temperatures are important abiotic factors that can be detrimental to fungal propagules. We hypothesized that among 12 Brazilian isolates of Metarhizium spp., M. anisopliae Mani 2 (n = 6), being adapted to abiotic conditions of the phylloplane, is more tolerant to UV light and high temperatures than M. robertsii (n = 3) and M. brunneum (n = 3). Inoculum of each isolate was exposed to UV-B for up to 8 h and viability evaluated 48 h later. After 8 h under UV-B, most of the isolates had germination rates below 5%. Discs of mycelia were incubated at different temperatures, and diameter of colonies were recorded for 12 days. Mycelia of M. robertsii isolates grew faster at 33 °C, while M. anisopliae and M. brunneum grew most at 25 °C. Dry conidia were incubated at 20, 25 or 40 °C for 12 days, and then viabilities were examined. At 40 °C, conidia of five M. anisopliae isolates were the most tolerant. In the three experiments, considerable intra- and inter-specific variability was detected. The results indicate that conclusions about tolerance to these abiotic factors should be made only at the isolate level.
- 8 January 2021
- Published by CSIRO Publishing in Reproduction, Fertility and Development
- Vol. 33 (2) , 181
146 Single injection of follicle-stimulating hormone before ovum pickup in lactating Holstein donors: Oocyte recovery and embryo production
Lactating donor cows frequently have decreased oocyte quality, lower fertilization rates, and impaired early embryonic development due to their lactational metabolic challenges. Synchronization and stimulation of follicular growth before ovum pickup (OPU) has been used to improve oocyte quality and consequently, embryo production. The objective of this study was to evaluate the effects of a single injection of FSH before OPU on oocyte recovery and embryo production in lactating Holstein donors. During June and July 2020, 22 lactating Holstein donors (open, 40 to 90 DIM, producing >90 lbs of milk) from Ruann Dairy (Riverdale, CA) were randomly assigned to one of two treatments (crossover design). Donors did not receive any injections before OPU when assigned to the No FSH treatment. Treatment 1×FSH consisted of a single intramuscular (IM) injection of 140 mg of FSH (Folltropin®, Vetoquinol) 36 h after gonadotrophin-releasing hormone (GnRH; Fertagyl, Merck®, 129 µg, IM). The FSH consisted of a 3.5-mL IM injection of 400 mg of FSH diluted in 10 mL of 0.5% hyaluronan (HA). OPU was performed 48 to 52 h after FSH. All donors received both treatments on a 14-day interval. The recovered oocytes were fertilized with the same sexed female-sorted semen in both rounds (3 different sires were used). OPU, oocyte classification, IVM, IVF, and culture (IVC) were performed as described by Demetrio et al. (2020 Anim. Reprod. 17, e20200053). All oocytes went into IVM, except for degenerated occytes. The number of 4-cell (or more) embryos on Day 3 of IVC divided by the number of oocytes in IVC after IVF is defined as the cleavage rate. The number of blastocysts (early to hatched) on Day 7 of IVP divided by the number of oocytes in IVC after IVF is defined as the blastocyst rate. Poisson-normal (count data) and Logistic-normal (proportion data) models were used to analyse the data. Treatment, donor (random effect), and sire were included in the models. The results are summarised in Table 1. Oocyte recovery and embryo production were highly donor dependent. There were no differences in the number of recovered oocytes among treatments. Stimulation of the follicular growth before OPU with one single injection of FSH diluted in 0.5% HA 36 h after GnRH improved oocyte quality, cleavage rates, blastocyst rates, embryo quality, and the total number of embryos per OPU in lactating Holstein donors. Table 1. Oocyte recovery, cleavage rate, and embryo production results a,bValues with different superscripts in the same column differ (at least P < 0.05).
- 8 January 2021
- Published by CSIRO Publishing in Reproduction, Fertility and Development
- Vol. 33 (2) , 181
146 Single injection of follicle-stimulating hormone before ovum pickup in lactating Holstein donors: Oocyte recovery and embryo production
Lactating donor cows frequently have decreased oocyte quality, lower fertilization rates, and impaired early embryonic development due to their lactational metabolic challenges. Synchronization and stimulation of follicular growth before ovum pickup (OPU) has been used to improve oocyte quality and consequently, embryo production. The objective of this study was to evaluate the effects of a single injection of FSH before OPU on oocyte recovery and embryo production in lactating Holstein donors. During June and July 2020, 22 lactating Holstein donors (open, 40 to 90 DIM, producing >90 lbs of milk) from Ruann Dairy (Riverdale, CA) were randomly assigned to one of two treatments (crossover design). Donors did not receive any injections before OPU when assigned to the No FSH treatment. Treatment 1×FSH consisted of a single intramuscular (IM) injection of 140 mg of FSH (Folltropin®, Vetoquinol) 36 h after gonadotrophin-releasing hormone (GnRH; Fertagyl, Merck®, 129 µg, IM). The FSH consisted of a 3.5-mL IM injection of 400 mg of FSH diluted in 10 mL of 0.5% hyaluronan (HA). OPU was performed 48 to 52 h after FSH. All donors received both treatments on a 14-day interval. The recovered oocytes were fertilized with the same sexed female-sorted semen in both rounds (3 different sires were used). OPU, oocyte classification, IVM, IVF, and culture (IVC) were performed as described by Demetrio et al. (2020 Anim. Reprod. 17, e20200053). All oocytes went into IVM, except for degenerated occytes. The number of 4-cell (or more) embryos on Day 3 of IVC divided by the number of oocytes in IVC after IVF is defined as the cleavage rate. The number of blastocysts (early to hatched) on Day 7 of IVP divided by the number of oocytes in IVC after IVF is defined as the blastocyst rate. Poisson-normal (count data) and Logistic-normal (proportion data) models were used to analyse the data. Treatment, donor (random effect), and sire were included in the models. The results are summarised in Table 1. Oocyte recovery and embryo production were highly donor dependent. There were no differences in the number of recovered oocytes among treatments. Stimulation of the follicular growth before OPU with one single injection of FSH diluted in 0.5% HA 36 h after GnRH improved oocyte quality, cleavage rates, blastocyst rates, embryo quality, and the total number of embryos per OPU in lactating Holstein donors. Table 1. Oocyte recovery, cleavage rate, and embryo production results a,bValues with different superscripts in the same column differ (at least P < 0.05).
- 30 June 2020
- Published by Wiley in Crop Science
- Vol. 60 (6) , 3083-3095
Impact on genetic gain from using misspecified statistical models in generating p‐rep designs for early generation plant‐breeding experiments
- 30 June 2020
- Published by Wiley in Crop Science
- Vol. 60 (6) , 3083-3095
Impact on genetic gain from using misspecified statistical models in generating p‐rep designs for early generation plant‐breeding experiments
- Open Access
- 1 January 2020
- Published by FapUNIFESP (SciELO) in Animal Reproduction
- Vol. 17 (3)
How can we improve embryo production and pregnancy outcomes of Holstein embryos produced in vitro? (12 years of practical results at a California dairy farm)
Genomic evaluations have revolutionized dairy cattle breeding, and the demand for embryos produced from very young heifers with high genetic merit has increased over time. The combination of low oocyte recovery, young age of donors, and milk production status can make the in vitro embryo production (IVP) of Holstein cattle incredibly challenging. Several factors need to be coordinated to obtain a live calf from an IVP embryo, but the quality of the oocyte at the start of the process is one of the key factors. Aspects related to oocyte quality, laboratory quality control, embryo quality and recipient selection are addressed here, based on the measures that the RuAnn Genetics Laboratory (Riverdale, California, USA) adopted in the last 12 years, with the goal of improving production of live, healthy calves from Holstein embryos. Follicular wave synchronization and stimulation with follicular stimulating hormone (FSH) is necessary to improve oocyte quality and consequently embryo production. Laboratory quality control and the use of high-quality supplies are essential to reduce variability in production and facilitate identification of other factors that might interfere with embryo production. High pregnancy rates can be achieved with good quality embryos selected at optimal time and stage of development, transferred by an experienced embryo transfer (ET) technician, to well managed recipients 7 or 8 days after estrus. Attention to detail at every step of the process is crucial to success.
- 1 January 2020
- Published by FapUNIFESP (SciELO) in Animal Reproduction
- Vol. 17 (3)
Open AccessHow can we improve embryo production and pregnancy outcomes of Holstein embryos produced in vitro? (12 years of practical results at a California dairy farm)
Genomic evaluations have revolutionized dairy cattle breeding, and the demand for embryos produced from very young heifers with high genetic merit has increased over time. The combination of low oocyte recovery, young age of donors, and milk production status can make the in vitro embryo production (IVP) of Holstein cattle incredibly challenging. Several factors need to be coordinated to obtain a live calf from an IVP embryo, but the quality of the oocyte at the start of the process is one of the key factors. Aspects related to oocyte quality, laboratory quality control, embryo quality and recipient selection are addressed here, based on the measures that the RuAnn Genetics Laboratory (Riverdale, California, USA) adopted in the last 12 years, with the goal of improving production of live, healthy calves from Holstein embryos. Follicular wave synchronization and stimulation with follicular stimulating hormone (FSH) is necessary to improve oocyte quality and consequently embryo production. Laboratory quality control and the use of high-quality supplies are essential to reduce variability in production and facilitate identification of other factors that might interfere with embryo production. High pregnancy rates can be achieved with good quality embryos selected at optimal time and stage of development, transferred by an experienced embryo transfer (ET) technician, to well managed recipients 7 or 8 days after estrus. Attention to detail at every step of the process is crucial to success.
- Open Access
- 20 December 2019
- Published by Universidade Federal do Parana in FLORESTA
- Vol. 50 (1) , 905-914
ADDITIVITY OF VOLUME COMPONENTS OF TREE BOLES
ADDITIVITY OF VOLUME COMPONENTS OF TREE BOLES
- 20 December 2019
- Published by Universidade Federal do Parana in FLORESTA
- Vol. 50 (1) , 905-914
Open AccessADDITIVITY OF VOLUME COMPONENTS OF TREE BOLES
ADDITIVITY OF VOLUME COMPONENTS OF TREE BOLES